Announcements

MDPI has just become the first open access (OA) publisher to reach the milestone of one million articles published. That is one million articles freely available to all, to circulate and build upon! We are proud to share this special moment with the global scientific community.

This landmark has been reached thanks to the immeasurable support of more than 600,000 expert reviewers, 66,000 editorial board members and 6700 hard-working colleagues across MDPI’s global offices.

Within more than 25 years of publishing, our journals received 2.1 million manuscripts and generated 4.6 million peer review reports to get to one million papers published.

Reaching the milestone of one million articles published reinforces our mission to remove any existing barriers and to make scientific research accessible to all. Since its inception, MDPI’s goal has been to create reliable processes to make science open. This is a path towards facilitating the dissemination of novel insights in scientific communities.

Regular feedback from authors and reviewers shows that our service is greatly appreciated and needed. At the same time, the feedback helps us identify areas for further improvement.

As it stands, a significant share of published research findings remain closed access. More than half of the content published with the most well-known legacy publishers stays behind a paywall, and that is not including articles published in hybrid OA journals, or made available months or years after publication.

A new policy announced by the US administration in August 2022 requires that, as of January 2026, all US federally funded research be made freely and immediately available after publication. While the new policy does not mandate articles be published under an open access license, it is aligned with the open access movement in removing all barriers to research. Similarly, some of the most advanced research institutions in the world intend to have all funded research articles published in open access by 2025.

MDPI is proud to be the leading agent of the transition to open access.

"Thanks a Million" to all the contributors!

We are currently recruiting Editorial Board Members (EBMs) for MDPI journals indexed in the Emerging Sources Citation Index (ESCI) in Web of Science. In particular, we are looking for experts who are interested in aiding in the development of our journals and safeguarding the scientific quality of the published findings.

Journals currently listed in the ESCI will receive an Impact Factor in June 2023, according to the changes announced by Web of Science (Clarivate). Therefore, this is an excellent time to become an Editorial Board Member for one of these fast-developing journals.

If you are interested in sharing your expertise in one of the journals listed below, please send us an application using this link.

The Editorial Office of the journal will contact you once the application has been approved.
Editorial Board Members are responsible for academic decisions on manuscripts in their field of expertise, will edit Special Issues, and may be invited to review manuscripts. The initial term lasts for two years, after which it can be renewed, and entails the following:

• Prescreening and making decisions on new submissions related to your research interests;
• Setting up at least one Special Issue during your term on a topic related to your research interests (or supervising Special Issues related to your research field);
• Providing input or feedback regarding journal policies;
• Helping to promote the journal among your peers or at conferences;
• Attending Board meetings to suggest journal development strategies;
• Reviewing manuscripts.

Editorial Board Members are entitled to a full waiver on one publication per year in the journal that they serve and need to be experts in their fields.

The list of ESCI journals can be found here: https://www.mdpi.com/about/journals/esci.

Please find the list of ESCI journals, categorized by subject, for which we are recruiting Editorial Board Members below.

We are pleased to announce that the website of the MDPI Sustainability Foundation has been revamped! For the past couple of months, our UX UI team and front-end developers have been working hard to launch the website in time for the opening of the Sustainability Awards nominations.

The website is not the only thing that has had a remodeling. Indeed, the format of the Emerging Sustainability Leader Award (ESLA) has been updated. ESLA is now a competition open to individual researchers or start-ups founded by researchers under the age of 35. Nominee applications will go through 2 rounds of selection until the final 3 are decided. The finalists will then be invited to give pitch presentations during the Award Ceremony to win either first place (10,000 USD) or runner-up (2 x 5000 USD).

The World Sustainability Award, on the other hand, remains the same: a total prize money of 100,000 USD is up for grabs by senior individual researchers or groups of researchers from the international research community.

Nominations for both the World Sustainability Award and the Emerging Sustainability Leader award are now open! Check out our new website for more information on how to nominate.

Peer Review Week began 19 September 2022 under the theme of “Research Integrity: Creating and Supporting Trust in Research”. Through various blog articles, podcast, and webinar, we discussed this crucial subject throughout the week, celebrating the essential role peer review plays in maintaining research quality.

To begin, we held a Webinar on the topic. Professor Peter W. Choate and Dr. Emmanuel Obeng-Gyasi joined Dr. Ioana Craciun, one of MDPI’s scientific officers, for an in-depth discussion.

We invite you to view the event recording:

During the week, the MDPI Blog in a series articles highlighted how good Peer Review safeguards research integrity. The following topics were covered:

• Peer Review Week 2022
• Research Integrity
• What We’ve Learned About Peer Review Reports
• 4 Steps to the Perfect Peer Review Report
• How to Write the Perfect Peer Review Report: An Interview
• Inviting Great Peer Reviewers

In a new edition of Insight Faster, an MDPI podcast, we were delighted to talk to the co-chairs of the Peer Review Week committee, Jayashree Rajagopalan (Senior Manager of Global Community Engagement for CACTUS) and Danielle Padula (Head of Marketing and Community Development at Scholastica) to get their take on this year’s event and its related topics.

You can find the Podcast here.

We hope you enjoy the contents!

The purpose of our Best Paper Awards is to promote and recognize the most impactful contributions published within MDPI journals.

The academic editors of each journal carefully selected reviews and research papers through a rigorous judging process based on criteria such as the scientific merit, overall impact, and the quality of presentation of the papers published in the journal.

We are honored to present the winners in the “Engineering” category, who were selected amongst extensive competition, and congratulate the authors for their outstanding scientific publications.

Actuators:

• “Position Control of Pneumatic Actuators Using Three-Mode Discrete-Valued Model Predictive Control”
  by Haitao Qi, Gary M. Bone and Yile Zhang
  Actuators 2019, 8(3), 56; doi: 10.3390/act8030056
• “Review of Electrothermal Actuators and Applications”
  by Alissa Potekhina and Changhai Wang
  Actuators 2019, 8(4), 69; doi: 10.3390/act8040069

Batteries:

• “Pre-Lithiation Strategies for Rechargeable Energy Storage Technologies: Concepts, Promises and Challenges”
  by Florian Holtstiege, Peer Bärmann, Roman Nölle, Martin Winter and Tobias Placke
  Batteries 2018, 4(1), 4; doi: 10.3390/batteries4010004
• “A Critical Review of Lithium-Ion Battery Recycling Processes from a Circular Economy Perspective”
  by Omar Velázquez-Martínez, Johanna Valio, Annukka Santasalo-Aarnio, Markus Reuter and Rodrigo Serna-Guerrero
  Batteries 2019, 5(4), 68; doi: 10.3390/batteries5040068
• “Critical Review of the Use of Reference Electrodes in Li-Ion Batteries: A Diagnostic Perspective”
  by Rinaldo Raccichini, Marco Amores and Gareth Hinds
  Batteries 2019, 5(1), 12; doi: 10.3390/batteries5010012
• “Life Cycle Analysis of Lithium-Ion Batteries for Automotive Applications”
  by Qiang Dai, Jarod C. Kelly, Linda Gaines and Michael Wang
  Batteries 2019, 5(2), 48; doi 10.3390/batteries5020048
• “Design Strategies for High Power vs. High Energy Lithium Ion Cells”
  by Michael J. Lain, James Brandon and Emma Kendrick
  Batteries 2019, 5(4), 64; doi: 10.3390/batteries5040064

Chemosensors:

• “Influence of Humidity on NO₂-Sensing and Selectivity of Spray-CVD Grown ZnO Thin Film above 400 °C”
  by Roussin Lontio Fomekong and Bilge Saruhan
  Chemosensors 2019, 7(3), 42; doi: 10.3390/chemosensors7030042
• “Low Molecular Weight Fluorescent Probes (LMFPs) to Detect the Group 12 Metal Triad”
  by Ashley D. Johnson, Rose M. Curtis and Karl J. Wallace
  Chemosensors 2019, 7(2), 22; doi: 10.3390/chemosensors7020022

Journal of Marine Science and Engineering:

• “Marine Application of Fiber Reinforced Composites: A Review”
  by Felice Rubino, Antonio Nisticò, Fausto Tucci and Pierpaolo Carlone
  Mar. Sci. Eng. 2020, 8(1), 26; doi: 10.3390/jmse8010026
• “Numerical Simulation of Large Wave Heights from Super Typhoon Nepartak (2016) in the Eastern Waters of Taiwan”
  by Shih-Chun Hsiao, Hongey Chen, Han-Lun Wu, Wei-Bo Chen, Chih-Hsin Chang, Wen-Dar Guo, Yung-Ming Chen and Lee-Yaw Lin
  Mar. Sci. Eng. 2020, 8(3), 217; doi: 10.3390/jmse8030217
• “Development of Deterministic Artificial Intelligence for Unmanned Underwater Vehicles (UUV)”
  by Timothy Sands
  Mar. Sci. Eng. 2020, 8(8), 578; doi: 10.3390/jmse8080578

Lubricants:

• “Solid Lubrication with MoS₂: A Review”
  by Mohammad R. Vazirisereshk, Ashlie Martini, David A. Strubbe and Mehmet Z. Baykara
  Lubricants 2019, 7(7), 57; doi:10.3390/lubricants7070057
• “Investigations of the Friction Losses of Different Engine Concepts. Part 1: A Combined Approach for Applying Subassembly-Resolved Friction Loss Analysis on a Modern Passenger-Car Diesel Engine”
  by Christoph Knauder, Hannes Allmaier, David E. Sander and Theodor Sams
  Lubricants 2019, 7(5), 39; doi: 10.3390/lubricants7050039
• “A Discussion on Present Theories of Rubber Friction, with Particular Reference to Different Possible Choices of Arbitrary Roughness Cutoff Parameters”
  by Andrea Genovese, Flavio Farroni, Antonio Papangelo and Michele Ciavarella
  Lubricants 2019, 7(10), 85; doi: 10.3390/lubricants7100085

Micromachines:

• “4D Printing of Multi-Hydrogels Using Direct Ink Writing in a Supporting Viscous Liquid”
  by Takuya Uchida and Hiroaki Onoe
  Micromachines 2019, 10(7), 433; doi: 10.3390/mi10070433
• “Enhanced Photocatalytic Performance and Mechanism of Au@CaTiO₃ Composites with Au Nanoparticles Assembled on CaTiO₃ Nanocuboids”
  by Yuxiang Yan, Hua Yang, Zao Yi, Ruishan Li and Xiangxian Wang
  Micromachines 2019, 10(4), 254; doi: 10.3390/mi10040254
• “Three-Dimensionally Structured Flexible Fog Harvesting Surfaces Inspired by Namib Desert Beetles”
  by Jun Kyu Park and Seok Kim
  Micromachines 2019, 10(3), 201; doi: 10.3390/mi10030201

Processes:

• “Accelerating Biologics Manufacturing by Modeling or: Is Approval under the QbD and PAT Approaches Demanded by Authorities Acceptable without a Digital-Twin?”
  by Steffen Zobel-Roos, Axel Schmidt, Fabian Mestmäcker, Mourad Mouellef, Maximilian Huter, Lukas Uhlenbrock, Martin Kornecki, Lara Lohmann, Reinhard Ditz and Jochen Strube
  Processes 2019, 7(2), 94; doi: 10.3390/pr7020094
• “Multiscale Agent-Based and Hybrid Modeling of the Tumor Immune Microenvironment”
  by Kerri-Ann Norton, Chang Gong, Samira Jamalian and Aleksander S. Popel
  Processes 2019, 7(1), 37; doi: 10.3390/pr7010037
• “Dynamic Flowsheet Model Development and Sensitivity Analysis of a Continuous Pharmaceutical Tablet Manufacturing Process Using the Wet Granulation Route”
  by Nirupaplava Metta, Michael Ghijs, Elisabeth Schäfer, Ashish Kumar, Philippe Cappuyns, Ivo Van Assche, Ravendra Singh, Rohit Ramachandran, Thomas De Beer, Marianthi Ierapetritou and Ingmar Nopens
  Processes 2019, 7(4), 234; doi: 10.3390/pr7040234

Sensors:

• “A Decentralized Privacy-Preserving Healthcare Blockchain for IoT”
  by Ashutosh Dhar Dwivedi, Gautam Srivastava, Shalini Dhar and Rajani Singh
  Sensors 2019, 19(2), 326; doi: 10.3390/s19020326
• “The Progress of Glucose Monitoring—A Review of Invasive to Minimally and Non-Invasive Techniques, Devices and Sensors”
  by Wilbert Villena Gonzales, Ahmed Toaha Mobashsher and Amin Abbosh
  Sensors 2019, 19(4), 800; doi: 10.3390/s19040800
• “Contact-Based Methods for Measuring Respiratory Rate”
  by Carlo Massaroni, Andrea Nicolò, Daniela Lo Presti, Massimo Sacchetti, Sergio Silvestri and Emiliano Schena
  Sensors 2019, 19(4), 908; doi: 10.3390/s19040908

World Electric Vehicle Journal:

• “Dynamic Wireless Power Transfer Charging Infrastructure for Future EVs: From Experimental Track to Real Circulated Roads Demonstrations”
  by Stéphane Laporte, Gérard Coquery, Virginie Deniau, Alexandre De Bernardinis and Nicolas Hautière
  World Electr. Veh. J. 2019, 10(4), 84; doi: 10.3390/wevj10040084

MDPI’s Young Investigator Awards recognize promising junior researchers, acknowledge their contributions, and enhance communication among scientists. We are proud to present the winners for the year 2021 in the “Engineering” category. The winners were selected by the journals’ editors.

We warmly congratulate the awarded Young Investigators for their outstanding contributions. MDPI will continue to provide support and recognition to the academic community.

Biosensors:

• Amay J. Bandodkar, North Carolina State University, USA.

ChemEngineering:

• Andrew S. Paluch, Miami University, USA.

Chemosensors:

• Mindy Levine, Ariel University, Israel.

Electronics:

• Amir H. Gandomi, University of Technology Sydney, Australia.

Journal of Marine Science and Engineering:

• Tiago Fazeres-Ferradosa, University of Porto, Portugal.

Machines:

• Chen Lv, Nanyang Technological University (NTU), Singapore;
• Ignacio Gonzalez-Prieto, University of Malaga (UMA), Spain;
• Ning Sun, Nankai University, China.

Processes:

• Anton Rassõlkin, Tallinn University of Technology, Estonia.

Sensors:

• Qammer H. Abbasi, Queen Mary University of London, UK;
• Chi Hwan Lee, Purdue University, USA.

We are proud to recognize the winners of MDPI’s 2021 Travel Awards in the “Engineering” category for their outstanding presentations and to present them with the prize.

MDPI journals regularly offer travel awards to encourage talented junior scientists to present their latest research at academic conferences in specific fields, which helps to increase their influence.

The winners mentioned below were carefully selected by the journal editors based on an outline of their research and the work to be presented at an academic conference.

We would like to warmly congratulate the winners of this year’s Travel Awards and wish them the greatest success with their future research endeavors. MDPI will continue to enhance communication among scientists.

Actuators:

• Matthew Wei Ming Tan, Nanyang Technological University, Singapore.

Applied Sciences:

• Márcia de Sousa Oliveira, University of León, Spain;
• Caroline Sarah Taylor, University of Sheffield, UK;
• Raquel Viveiros, NOVA University of Lisbon, Portugal;
• Alfonso González Briones, University of Salamanca, Spain;
• Alen Horvat, University Carlos III Madrid, Spain;
• Marie Švecová, University of Chemistry and Technology, Czech Republic;
• Venanzio Giannella, University of Salerno, Italy;
• Michaël Lobet, University of Namur, Belgium;
• Lam Thi Ngoc Tran, National Research Council, Italy;
• Hanfei Mei, University of South Carolina, USA.

Applied System Innovation:

• Mert Nakip, Polish Academy of Sciences, Poland.

Biosensors:

• Mengdi Bao, Rochester Institute of Technology, USA;

Yichi Su, Stanford University, USA.

Buildings:

• Karthik Panchabikesan, Concordia University, Canada;
• Xiaolei Yuan, Tongji University, China.

Chemosensors:

• Verónica Montes García, Université de Strasbourg & CNRS, France.

Electronics:

• Peng Hang, Nanyang Technological University, Singapore;
• Alfonso González Briones, University of Salamanca, Spain.

Fluids:

• Alberto Zingaro, Politecnico di Milano, Italy;
• Sarah E. Morris, Auburn University, USA.

Infrastructures:

• Angelo Aloisio, University of L’Aquila, Italy;
• André Filipe Castanheira Alves Furtado, University of Porto, Portugal.

Journal of Low Power Electronics and Applications:

• Tommaso Zanotti, University of Modena and Reggio Emilia, Italy.

Journal of Manufacturing and Materials Processing:

• Nagalingam Arun Prasanth, Rolls-Royce@NTU Corporate Lab, Singapore.

Machines:

• Muhammad Jamil, Nanjing University of Aeronautics and Astronautics (NUAA), China;
• Mariagrazia Tristano, Sheffield Hallam University, UK.

Processes:

• Michele Schlich, University of Cagliari, Italy;
• Álvaro Santana Mayor, University of La Laguna, Spain.

Sensors:

• Eleonora Macchia, Åbo Akademi University, Finland;
• Alfonso Gonzalez Briones, University of Salamanca, Spain;
• Saúl Vallejos Calzada, University of Burgos, Spain;
• Ana Novo, University of Vigo, Spain;
• Yalin Liu, Macau University of Science and Technology, China;
• Marilena Giglio, Politecnico of Bari, Italy;
• Yuzhi Shi, Nanyang Technological University (NTU), Singapore.

In order to acknowledge our reviewers, who so generously dedicate their time to reviewing papers and demonstrate diligence, professionalism, and timeliness when reviewing manuscripts, MDPI journals regularly offer outstanding reviewer awards to scholars who participate in the peer-review process.

We are proud to recognize the winners for the year 2021 in the “Engineering” category for their outstanding contributions among extensive competition by presenting them with an Outstanding Reviewer Award.

We would like to take this opportunity to congratulate all of the winners on their achievement. MDPI will continue to provide support and recognition to the academic community.

Actuators:

• Ryszard Dindorf, Kielce University of Technology, Poland.

Applied Sciences:

• Khaled Giasin, University of Portsmouth, UK;
• Jakub Krzysztof Grabski, University of Technology, Poland;
• Marcos Tostado-Véliz, University of Jaén, Spain;
• Luigi Pugliese, University of Calabria, Italy;
• Francesco Bennardo, University of Catanzaro, Italy;
• Heriberto Perez-Acebo, University of the Basque Country UPV/EHU, Spain.

Biosensors:

• Amir Hatamie, University of Gothenburg, Sweden.

Buildings:

• Francesco Fiorito, Polytechnic University of Bari, Italy;
• Paul G. O’Brien, York University, Canada.

Chemosensors:

• Verónica Montes García, University of Strasbourg, France.

Machines:

• Piotr Gierlak, Rzeszow University of Technology, Poland;
• Sebastian A. Nugroho, University of Michigan, USA;
• Viorel Paleu, Gheorghe Asachi Technical University of Iasi, Romania.

Processes:

• Marcin Dębowski, University of Warmia and Mazury in Olsztyn, Poland;
• Bartłomiej Zieniuk, Warsaw University of Life Sciences, Poland;
• Zbigniew Nadolny, Poznan University of Technology, Poland;
• Attila Egedy, University of Pannonia, Hungary;
• Seok-Ho Rhi, Chungbuk National University, Korea.

Sensors:

• Hojong Choi, Kumoh National Institute of Technology, Korea;
• Li Fu, Hangzhou Dianzi University, China;
• Leonardo De Mello Honorio, Federal University of Juiz De Fora Juiz De Fora, Brazil;
• Mario Versaci, Mediterranea University, Italy;
• Robertas Damasevicius, Kaunas University of Technology, Lithuania.

The 2021 citation metrics have been officially released in Scopus!

We are pleased to announce that 182 MDPI journals are included, of which:

● 21 journals received their first CiteScore.
● 85% of journals increased their CiteScore from 2020.
● 155 journals (85%) ranked above average, in at least one category.

The following 65 MDPI journals (36%) ranked among the top 25% of journals, in at least one category:

Source: 2021 CiteScores™ (Elsevier)

We are pleased to announce the launch of a new project in Fluids (ISSN 2311-5521)—the Special Issue Mentor Program.

The program aims to provide early career scientists with the opportunity to enhance their editing, networking, and organizational skills and to act as Guest Editors under the mentorship of an experienced scientist.

What you will receive from a Special Issue Mentor Program:

• A Guest Editor certificate;
• A platform to collect papers on a certain topic;
• Guidance from experienced scientists from Fluids;
• More editorial experience and the opportunity to enrich your resume.

If you are interested in this opportunity, please send your Special Issue proposal to the Fluids Editorial Office (fluids@mdpi.com) or submit the proposal at the following link: https://www.mdpi.com/journalproposal/sendproposalspecialissue/fluids. We will then discuss the process (i.e., mentor collaboration, Special Issue topic feasibility analysis, etc.) in further detail.

In addition to the new Special Issue Mentor Program, Fluids continues to welcome all Special Issue proposals based on hot research topics as usual.