Announcements

The 2022 citation metrics have been released in the Journal Citation Reports (JCR), and we’re pleased to announce the following results for MDPI journals:

We are thrilled to announce that 90% of our ranked MDPI journals, specifically 86 out of 96 (captured in the table below), are performing above average in Q1 or Q2. This year, Clarivate has expanded its Impact Factor (IF) awards to include journals in the Emerging Sources Citation Index (ESCI) and the Arts and Humanities Citation Index (AHCI), providing greater transparency for the full set of journals indexed in the Web of Science Core Collection. As a result, 111 of MDPI journals have received their first IF in 2023, with 37 journals surpassing an IF of 3.0. In total, 208 MDPI journals have been honored with an IF.

Clarivate explains that by "expanding the coverage but holding to highly selective standards, the [Impact Factor] is now a reliable indicator of trustworthiness, as well as a measure of scholarly impact, at the journal level."

Please visit our blog post where we discuss the release of the latest citation metrics with our Indexing Manager, Dr. Constanze Schelhorn, to find out what's different this time around and how to make use of different metrics available.

Note: The Journal of Personalized Medicine's Impact Factor was omitted in the original release and will be assigned separately. Please find the data on the journal webpage in due course.

Source: 2022 Journal Impact Factors, Journal Citation Reports ^TM (Clarivate, 2023)

As a leading open access publisher, MDPI provides scholars with a high-quality and rich academic exchange platform by continuously expanding into new and exciting research areas.

In December 2022, MDPI launched five new journals, covering multiple subjects such as life sciences, biology, medicine and pharmacology, social sciences and humanities. These new journals are being edited by established scholars across the world.

If you are interested in creating more open access journals with us to publish cutting-edge research, please send your journal proposal application to newjournal-committee@mdpi.com.

MDPI is pleased to announce that we now display the co-authors’ email addresses in addition to the corresponding author’s email address on the webpage of published papers, protected by Captcha. For more information about this change, please visit the journal’s instructions for authors page. 

We believe this change will facilitate academic discussions and advance our cause of open science and research. The corresponding authors are responsible for communicating with their co-authors and indicating in our system (https://susy.mdpi.com/) if co-authors would prefer for their email addresses not to be displayed.

On 9 February 2023, Clarivate, a global leader in providing trusted insights and analytics, added the Preprint Citation Index to the Web of Science platform, streamlining the research process by allowing researchers to locate and link to preprints alongside other trusted content in the database.

The Preprint Citation Index will act as a bridge to connect cutting-edge preprints with peer-reviewed journal articles published within the Web of Science Core Collection. Alerts can be easily set to monitor new research across several repositories and authors will also be able to include preprints on their Web of Science Research Profile to more accurately display their various research outputs.

As of its launch, the Preprint Citation Index will provide nearly two million preprints from various repositories, including MDPI’s own Preprints.org.

MDPI's Preprints Platform – Preprints.org

To advance Open Science and the fast dissemination of research, MDPI offers researchers a free multidisciplinary preprint platform. Preprints.org accepts submissions from all research areas and offers authors high visibility, permanent archiving, article-level Metrics and immediately citable content by assigning a Digital Object Identifier (DOI) to all preprints.

During submission to any MDPI journal, authors have the option to share their research as a preprint. After an initial screening, the manuscript is available online in 48 hours or less. Once online, preprints can be downloaded, shared, commented on, and cited, providing authors maximum visibility.

We invite you to join the ranks of the over 100k researchers using Preprints.org and share your research.

For more information, please visit Preprints.org.

We are pleased to announce that Prof. Dr. Marco Rossi has been appointed founding Editor-in-Chief of the Journal of Experimental and Theoretical Analyses (JETA, ISSN: 2813-4648).

Name: Prof. Dr. Marco Rossi
Affiliation: Department of Basic and Applied Sciences for Engineering, Sapienza University of Rome, Via A. Scarpa 16, 00185 Rome, Italy
Interests: nanocharacterizations; electron microscopies and diffractions; tomography; nanotechnology; scanning probe microscopies; nanometrology; failure analysis in industrial processes
Homepage: https://corsidilaurea.uniroma1.it/en/users/marcorossiuniroma1it

Prof. Dr. Marco Rossi is a Full Professor of experimental physics of matter at the Department of Basic and Applied Sciences for Engineering, Sapienza University of Rome in Italy, and has taught the course “Microscopies and Nanocharacterization Techniques” since the academic year 2008-09 for the MS Program in Nanotechnology Engineering, and the course “General Physics I” since the academic year 1991-92 for the first level degree in Mechanical Engineering.

He is the coordinator of the EMINA (Electron MIcroscopy and NAnoscopies) Lab, a member of the executive scientific board of the Research Center for Nanotechnology of Sapienza (CNIS) since its foundation (2006), and Rector’s Delegate (from 2021) for Industrial Ph.D. programs at Sapienza University of Rome.

In 2009, he cofounded Nanoshare Srl, an academic spin-off devoted to the technological transfer of nanotechnologies. He is also one of the founders of the NanoItaly Association (Vice-president, since its foundation in 2015, until 2020), a non-profit scientific association, aimed at promoting and enhancing the role of nano-biotechnologies and nanosciences in the Italian, European, and international society. Since 2016, the association has organized annually the international conference NanoInnovation, dedicated to technology transfer in the field of micro-nano technologies. In this context, he has been the Chair of the Organizing Committee for the past editions.

His research interests mainly concern nanoscience and nanotechnology problems, directing the acquired knowledge to the development of innovative multiscale and multi-technical characterization approaches. In recent years, a part of his research activity has also been devoted to defining new methodologies and strategies for soft matter imaging (from polymers to bacteria) through a combined and synergistic use of electron microscopies, diffraction techniques, tomography, and scanning probe microscopies with related spectroscopies.

He is currently the coordinator of numerous national and international research projects. Since 1 April 2020, he has been the Project Coordinator for the European project CHALLENGES, funded by the European Commission as part of Horizon2020 (www.challenges2020.eu). Since 1 November 2022, he has been the Sapienza PI of the Research Infrastructure Project iENTRANCE@ENL, funded by the Italian Ministry of Research and University with more than EUR 75 M in the framework of Next Generation EU actions (https://www.ientrance.eu/home/).

He has published more than 210 scientific papers in international peer-reviewed journals (Bibliometric Profiles on: ORCID: 0000-0001-7603-1805; ResearcherID (WoS): G-1689-2012; SCOPUS Author ID: 55819540100; PUBLONS: www.publons.com/a/515474).

The following is a short Q&A with Prof. Dr. Marco Rossi, who shared his vision for the journal with us, as well as his views of the research area and Open Access publishing:

1. What appealed to you about the journal that made you want to take the role as its Editor-in-Chief?

I was contacted by the MDPI staff, and after some consideration, I accepted this role because it provides both a challenge and an opportunity to contribute to the launch of a new journal, which is based on an innovative approach and adopts the Open Access publishing policy. I strongly believe that research outputs should be always shared openly to boost knowledge. MDPI's Open Access policy guarantees this fundamental requirement, combining reasonable publication fees and a variety of opportunities to reduce APC (such as IOAP, reviewer vouchers, etc.).
I also evaluated that the chance to work in a dynamic environment, like I experienced at MDPI, is an opportunity that is worth taking.
Over the past decade, I have experienced different editorial roles, from Editorial Board Membership/Associate status of various research journals to editor of Special Issues, books, and proceedings, but this will be my first time as Editor-in-Chief. I am sure that all of this will make my new job quite interesting.

2. What is your vision for the journal?

JETA is a new journal with a wide landscape of potential authors and an even wider audience of possible readers. Its main attraction, which must be properly disclosed and disseminated, is that JETA is, in my opinion, the first scientific journal explicitly devoted to combining perspectives of technological applications and deep technology, publishing papers on the methods and applications of analysis science on both the experimental and theoretical aspects of engineering, which advance the in-depth understanding of the relationship between the structure, properties, functions, and applications using methods of analysis.
JETA will have to guarantee a high standard of publication and a fast but accurate editorial process, fully respecting and preserving the integrity and ethics of scholarly publishing.

3. What does the future of this field of research look like?

As illustrated previously, the field of interest for JETA is fascinatingly broad, involving all sectors of engineering, and seeking continuous advancement in a more accurate in-depth understanding of the relationship between the structure, properties, functions, and applications in the various fields, from bioengineering to engineering of materials, affecting practically all aspects of life.
The future of this field is very bright and will positively impact the development of new products and services that ultimately enhance society, the environment, and the quality of life.
Regarding the future of the field, it is also worth mentioning that, globally, the number of research infrastructures devoted to developing and carrying out experimental analyses to support theoretical findings and innovation toward market applications is rapidly and continuously increasing.

4. What do you think of the development of Open Access in the publishing field?

Open Access should be the “standard” way to make research findings freely available to access and view. Its policies must be properly implemented in order to make information available in our present and future society (everywhere, at any time and to anyone, without any limitations and/or discrimination). Open Access research must be of high quality and carefully peer-reviewed, but independent of any political/religious constraints.
Many countries and supranational institutions (as European Community) are currently requesting that their funded research be disclosed in this form.
Hard work and vigilance will be needed so that the further development of Open Access will mandatorily provide equal opportunities to all researchers to disseminate their findings and achieve their full potential.
It is necessary to support and promote all forms of Open Access that are financially sustainable. The publishing houses, and above all, the multimedia providers, have to implement proper policies to cover the cost of management of Open Access, guaranteeing the possibility of reduced/waived fees for scientists and researchers at the beginning of their careers and/or working in developing countries.

We warmly welcome Prof. Dr. Marco Rossi in his new role as founding Editor-in-Chief of JETA and wish him every success in helping the journal achieve many milestones.

We are pleased to announce the launch of a new initiative—the MDPI Special Issue Mentor Program.

This program will enable early career researchers (who must hold a Ph.D. in a related field) to experience editing a Special Issue in MDPI journals, under the mentorship of our experienced Editorial Board Members or other experienced scientists. The mentor program will provide an excellent opportunity for early career scientists to gain editorial experience, and to cultivate their ability to edit scientific research.

The mentee’s responsibilities include:

• Proposing a Special Issue title and assisting the mentor in preparing a summary (around 200–400 words) and 3–10 keywords describing the background, importance, and goal of the Issue;
• Writing a brief promotion plan for the Special Issue;
• Preparing a list of scholars who may be interested in the Issue and personally e-mailing invitations on behalf of Guest Editors;
• Writing an editorial for the online Special Issue together with the mentor.

The mentor’s responsibilities include:

• Conducting a final check before the Special Issue is published online;
• Performing editorial control of the Special Issue and quality control of the publications, both of which must be carried out in a timely manner;
• Providing suggestions to younger scholars if they have any doubts or concerns regarding submissions;
• Organizing video calls with young scholars and the Editorial Office regularly to discuss problems and improvement suggestions for the Special Issue;
• Making and submitting decisions regarding submissions with the assistance of mentees.

Certificates and awards:
After the Special Issue closes, the Editorial Office will provide official certificates for all the mentors and early career researchers.

If you are interested in this opportunity, please send your Special Issue proposal to the Editorial Office of a journal you choose, and we will discuss the process (i.e., mentor collaboration, Special Issue topic feasibility analysis, etc.) in further detail. The full list of MDPI journals is as follows: https://www.mdpi.com/about/journals.

In addition to the new Special Issue Mentor Program, we will continue to welcome all Special Issue proposals focusing on hot research topics.

MDPI has just become the first open access (OA) publisher to reach the milestone of one million articles published. That is one million articles freely available to all, to circulate and build upon! We are proud to share this special moment with the global scientific community.

This landmark has been reached thanks to the immeasurable support of more than 600,000 expert reviewers, 66,000 editorial board members and 6700 hard-working colleagues across MDPI’s global offices.

Within more than 25 years of publishing, our journals received 2.1 million manuscripts and generated 4.6 million peer review reports to get to one million papers published.

Reaching the milestone of one million articles published reinforces our mission to remove any existing barriers and to make scientific research accessible to all. Since its inception, MDPI’s goal has been to create reliable processes to make science open. This is a path towards facilitating the dissemination of novel insights in scientific communities.

Regular feedback from authors and reviewers shows that our service is greatly appreciated and needed. At the same time, the feedback helps us identify areas for further improvement.

As it stands, a significant share of published research findings remain closed access. More than half of the content published with the most well-known legacy publishers stays behind a paywall, and that is not including articles published in hybrid OA journals, or made available months or years after publication.

A new policy announced by the US administration in August 2022 requires that, as of January 2026, all US federally funded research be made freely and immediately available after publication. While the new policy does not mandate articles be published under an open access license, it is aligned with the open access movement in removing all barriers to research. Similarly, some of the most advanced research institutions in the world intend to have all funded research articles published in open access by 2025.

MDPI is proud to be the leading agent of the transition to open access.

"Thanks a Million" to all the contributors!

We are pleased to announce that the website of the MDPI Sustainability Foundation has been revamped! For the past couple of months, our UX UI team and front-end developers have been working hard to launch the website in time for the opening of the Sustainability Awards nominations.

The website is not the only thing that has had a remodeling. Indeed, the format of the Emerging Sustainability Leader Award (ESLA) has been updated. ESLA is now a competition open to individual researchers or start-ups founded by researchers under the age of 35. Nominee applications will go through 2 rounds of selection until the final 3 are decided. The finalists will then be invited to give pitch presentations during the Award Ceremony to win either first place (10,000 USD) or runner-up (2 x 5000 USD).

The World Sustainability Award, on the other hand, remains the same: a total prize money of 100,000 USD is up for grabs by senior individual researchers or groups of researchers from the international research community.

Nominations for both the World Sustainability Award and the Emerging Sustainability Leader award are now open! Check out our new website for more information on how to nominate.

Peer Review Week began 19 September 2022 under the theme of “Research Integrity: Creating and Supporting Trust in Research”. Through various blog articles, podcast, and webinar, we discussed this crucial subject throughout the week, celebrating the essential role peer review plays in maintaining research quality.

To begin, we held a Webinar on the topic. Professor Peter W. Choate and Dr. Emmanuel Obeng-Gyasi joined Dr. Ioana Craciun, one of MDPI’s scientific officers, for an in-depth discussion.

We invite you to view the event recording:

During the week, the MDPI Blog in a series articles highlighted how good Peer Review safeguards research integrity. The following topics were covered:

• Peer Review Week 2022
• Research Integrity
• What We’ve Learned About Peer Review Reports
• 4 Steps to the Perfect Peer Review Report
• How to Write the Perfect Peer Review Report: An Interview
• Inviting Great Peer Reviewers

In a new edition of Insight Faster, an MDPI podcast, we were delighted to talk to the co-chairs of the Peer Review Week committee, Jayashree Rajagopalan (Senior Manager of Global Community Engagement for CACTUS) and Danielle Padula (Head of Marketing and Community Development at Scholastica) to get their take on this year’s event and its related topics.

You can find the Podcast here.

We hope you enjoy the contents!

The purpose of our Best Paper Awards is to promote and recognize the most impactful contributions published within MDPI journals.

The academic editors of each journal carefully selected reviews and research papers through a rigorous judging process based on criteria such as the scientific merit, overall impact, and the quality of presentation of the papers published in the journal.

We are honored to present the winners in the “Engineering” category, who were selected amongst extensive competition, and congratulate the authors for their outstanding scientific publications.

Actuators:

• “Position Control of Pneumatic Actuators Using Three-Mode Discrete-Valued Model Predictive Control”
  by Haitao Qi, Gary M. Bone and Yile Zhang
  Actuators 2019, 8(3), 56; doi: 10.3390/act8030056
• “Review of Electrothermal Actuators and Applications”
  by Alissa Potekhina and Changhai Wang
  Actuators 2019, 8(4), 69; doi: 10.3390/act8040069

Batteries:

• “Pre-Lithiation Strategies for Rechargeable Energy Storage Technologies: Concepts, Promises and Challenges”
  by Florian Holtstiege, Peer Bärmann, Roman Nölle, Martin Winter and Tobias Placke
  Batteries 2018, 4(1), 4; doi: 10.3390/batteries4010004
• “A Critical Review of Lithium-Ion Battery Recycling Processes from a Circular Economy Perspective”
  by Omar Velázquez-Martínez, Johanna Valio, Annukka Santasalo-Aarnio, Markus Reuter and Rodrigo Serna-Guerrero
  Batteries 2019, 5(4), 68; doi: 10.3390/batteries5040068
• “Critical Review of the Use of Reference Electrodes in Li-Ion Batteries: A Diagnostic Perspective”
  by Rinaldo Raccichini, Marco Amores and Gareth Hinds
  Batteries 2019, 5(1), 12; doi: 10.3390/batteries5010012
• “Life Cycle Analysis of Lithium-Ion Batteries for Automotive Applications”
  by Qiang Dai, Jarod C. Kelly, Linda Gaines and Michael Wang
  Batteries 2019, 5(2), 48; doi 10.3390/batteries5020048
• “Design Strategies for High Power vs. High Energy Lithium Ion Cells”
  by Michael J. Lain, James Brandon and Emma Kendrick
  Batteries 2019, 5(4), 64; doi: 10.3390/batteries5040064

Chemosensors:

• “Influence of Humidity on NO₂-Sensing and Selectivity of Spray-CVD Grown ZnO Thin Film above 400 °C”
  by Roussin Lontio Fomekong and Bilge Saruhan
  Chemosensors 2019, 7(3), 42; doi: 10.3390/chemosensors7030042
• “Low Molecular Weight Fluorescent Probes (LMFPs) to Detect the Group 12 Metal Triad”
  by Ashley D. Johnson, Rose M. Curtis and Karl J. Wallace
  Chemosensors 2019, 7(2), 22; doi: 10.3390/chemosensors7020022

Journal of Marine Science and Engineering:

• “Marine Application of Fiber Reinforced Composites: A Review”
  by Felice Rubino, Antonio Nisticò, Fausto Tucci and Pierpaolo Carlone
  Mar. Sci. Eng. 2020, 8(1), 26; doi: 10.3390/jmse8010026
• “Numerical Simulation of Large Wave Heights from Super Typhoon Nepartak (2016) in the Eastern Waters of Taiwan”
  by Shih-Chun Hsiao, Hongey Chen, Han-Lun Wu, Wei-Bo Chen, Chih-Hsin Chang, Wen-Dar Guo, Yung-Ming Chen and Lee-Yaw Lin
  Mar. Sci. Eng. 2020, 8(3), 217; doi: 10.3390/jmse8030217
• “Development of Deterministic Artificial Intelligence for Unmanned Underwater Vehicles (UUV)”
  by Timothy Sands
  Mar. Sci. Eng. 2020, 8(8), 578; doi: 10.3390/jmse8080578

Lubricants:

• “Solid Lubrication with MoS₂: A Review”
  by Mohammad R. Vazirisereshk, Ashlie Martini, David A. Strubbe and Mehmet Z. Baykara
  Lubricants 2019, 7(7), 57; doi:10.3390/lubricants7070057
• “Investigations of the Friction Losses of Different Engine Concepts. Part 1: A Combined Approach for Applying Subassembly-Resolved Friction Loss Analysis on a Modern Passenger-Car Diesel Engine”
  by Christoph Knauder, Hannes Allmaier, David E. Sander and Theodor Sams
  Lubricants 2019, 7(5), 39; doi: 10.3390/lubricants7050039
• “A Discussion on Present Theories of Rubber Friction, with Particular Reference to Different Possible Choices of Arbitrary Roughness Cutoff Parameters”
  by Andrea Genovese, Flavio Farroni, Antonio Papangelo and Michele Ciavarella
  Lubricants 2019, 7(10), 85; doi: 10.3390/lubricants7100085

Micromachines:

• “4D Printing of Multi-Hydrogels Using Direct Ink Writing in a Supporting Viscous Liquid”
  by Takuya Uchida and Hiroaki Onoe
  Micromachines 2019, 10(7), 433; doi: 10.3390/mi10070433
• “Enhanced Photocatalytic Performance and Mechanism of Au@CaTiO₃ Composites with Au Nanoparticles Assembled on CaTiO₃ Nanocuboids”
  by Yuxiang Yan, Hua Yang, Zao Yi, Ruishan Li and Xiangxian Wang
  Micromachines 2019, 10(4), 254; doi: 10.3390/mi10040254
• “Three-Dimensionally Structured Flexible Fog Harvesting Surfaces Inspired by Namib Desert Beetles”
  by Jun Kyu Park and Seok Kim
  Micromachines 2019, 10(3), 201; doi: 10.3390/mi10030201

Processes:

• “Accelerating Biologics Manufacturing by Modeling or: Is Approval under the QbD and PAT Approaches Demanded by Authorities Acceptable without a Digital-Twin?”
  by Steffen Zobel-Roos, Axel Schmidt, Fabian Mestmäcker, Mourad Mouellef, Maximilian Huter, Lukas Uhlenbrock, Martin Kornecki, Lara Lohmann, Reinhard Ditz and Jochen Strube
  Processes 2019, 7(2), 94; doi: 10.3390/pr7020094
• “Multiscale Agent-Based and Hybrid Modeling of the Tumor Immune Microenvironment”
  by Kerri-Ann Norton, Chang Gong, Samira Jamalian and Aleksander S. Popel
  Processes 2019, 7(1), 37; doi: 10.3390/pr7010037
• “Dynamic Flowsheet Model Development and Sensitivity Analysis of a Continuous Pharmaceutical Tablet Manufacturing Process Using the Wet Granulation Route”
  by Nirupaplava Metta, Michael Ghijs, Elisabeth Schäfer, Ashish Kumar, Philippe Cappuyns, Ivo Van Assche, Ravendra Singh, Rohit Ramachandran, Thomas De Beer, Marianthi Ierapetritou and Ingmar Nopens
  Processes 2019, 7(4), 234; doi: 10.3390/pr7040234

Sensors:

• “A Decentralized Privacy-Preserving Healthcare Blockchain for IoT”
  by Ashutosh Dhar Dwivedi, Gautam Srivastava, Shalini Dhar and Rajani Singh
  Sensors 2019, 19(2), 326; doi: 10.3390/s19020326
• “The Progress of Glucose Monitoring—A Review of Invasive to Minimally and Non-Invasive Techniques, Devices and Sensors”
  by Wilbert Villena Gonzales, Ahmed Toaha Mobashsher and Amin Abbosh
  Sensors 2019, 19(4), 800; doi: 10.3390/s19040800
• “Contact-Based Methods for Measuring Respiratory Rate”
  by Carlo Massaroni, Andrea Nicolò, Daniela Lo Presti, Massimo Sacchetti, Sergio Silvestri and Emiliano Schena
  Sensors 2019, 19(4), 908; doi: 10.3390/s19040908

World Electric Vehicle Journal:

• “Dynamic Wireless Power Transfer Charging Infrastructure for Future EVs: From Experimental Track to Real Circulated Roads Demonstrations”
  by Stéphane Laporte, Gérard Coquery, Virginie Deniau, Alexandre De Bernardinis and Nicolas Hautière
  World Electr. Veh. J. 2019, 10(4), 84; doi: 10.3390/wevj10040084