Announcements

The purpose of our Best Paper Awards is to promote and recognize the most impactful contributions published within MDPI journals.

The academic editors of each journal carefully selected reviews and research papers through a rigorous judging process based on criteria such as the scientific merit, overall impact, and the quality of presentation of the papers published in the journal.

We are honored to present the winners in the “Engineering” category, who were selected amongst extensive competition, and congratulate the authors for their outstanding scientific publications.

Actuators:

• “Position Control of Pneumatic Actuators Using Three-Mode Discrete-Valued Model Predictive Control”
  by Haitao Qi, Gary M. Bone and Yile Zhang
  Actuators 2019, 8(3), 56; doi: 10.3390/act8030056
• “Review of Electrothermal Actuators and Applications”
  by Alissa Potekhina and Changhai Wang
  Actuators 2019, 8(4), 69; doi: 10.3390/act8040069

Batteries:

• “Pre-Lithiation Strategies for Rechargeable Energy Storage Technologies: Concepts, Promises and Challenges”
  by Florian Holtstiege, Peer Bärmann, Roman Nölle, Martin Winter and Tobias Placke
  Batteries 2018, 4(1), 4; doi: 10.3390/batteries4010004
• “A Critical Review of Lithium-Ion Battery Recycling Processes from a Circular Economy Perspective”
  by Omar Velázquez-Martínez, Johanna Valio, Annukka Santasalo-Aarnio, Markus Reuter and Rodrigo Serna-Guerrero
  Batteries 2019, 5(4), 68; doi: 10.3390/batteries5040068
• “Critical Review of the Use of Reference Electrodes in Li-Ion Batteries: A Diagnostic Perspective”
  by Rinaldo Raccichini, Marco Amores and Gareth Hinds
  Batteries 2019, 5(1), 12; doi: 10.3390/batteries5010012
• “Life Cycle Analysis of Lithium-Ion Batteries for Automotive Applications”
  by Qiang Dai, Jarod C. Kelly, Linda Gaines and Michael Wang
  Batteries 2019, 5(2), 48; doi 10.3390/batteries5020048
• “Design Strategies for High Power vs. High Energy Lithium Ion Cells”
  by Michael J. Lain, James Brandon and Emma Kendrick
  Batteries 2019, 5(4), 64; doi: 10.3390/batteries5040064

Chemosensors:

• “Influence of Humidity on NO₂-Sensing and Selectivity of Spray-CVD Grown ZnO Thin Film above 400 °C”
  by Roussin Lontio Fomekong and Bilge Saruhan
  Chemosensors 2019, 7(3), 42; doi: 10.3390/chemosensors7030042
• “Low Molecular Weight Fluorescent Probes (LMFPs) to Detect the Group 12 Metal Triad”
  by Ashley D. Johnson, Rose M. Curtis and Karl J. Wallace
  Chemosensors 2019, 7(2), 22; doi: 10.3390/chemosensors7020022

Journal of Marine Science and Engineering:

• “Marine Application of Fiber Reinforced Composites: A Review”
  by Felice Rubino, Antonio Nisticò, Fausto Tucci and Pierpaolo Carlone
  Mar. Sci. Eng. 2020, 8(1), 26; doi: 10.3390/jmse8010026
• “Numerical Simulation of Large Wave Heights from Super Typhoon Nepartak (2016) in the Eastern Waters of Taiwan”
  by Shih-Chun Hsiao, Hongey Chen, Han-Lun Wu, Wei-Bo Chen, Chih-Hsin Chang, Wen-Dar Guo, Yung-Ming Chen and Lee-Yaw Lin
  Mar. Sci. Eng. 2020, 8(3), 217; doi: 10.3390/jmse8030217
• “Development of Deterministic Artificial Intelligence for Unmanned Underwater Vehicles (UUV)”
  by Timothy Sands
  Mar. Sci. Eng. 2020, 8(8), 578; doi: 10.3390/jmse8080578

Lubricants:

• “Solid Lubrication with MoS₂: A Review”
  by Mohammad R. Vazirisereshk, Ashlie Martini, David A. Strubbe and Mehmet Z. Baykara
  Lubricants 2019, 7(7), 57; doi:10.3390/lubricants7070057
• “Investigations of the Friction Losses of Different Engine Concepts. Part 1: A Combined Approach for Applying Subassembly-Resolved Friction Loss Analysis on a Modern Passenger-Car Diesel Engine”
  by Christoph Knauder, Hannes Allmaier, David E. Sander and Theodor Sams
  Lubricants 2019, 7(5), 39; doi: 10.3390/lubricants7050039
• “A Discussion on Present Theories of Rubber Friction, with Particular Reference to Different Possible Choices of Arbitrary Roughness Cutoff Parameters”
  by Andrea Genovese, Flavio Farroni, Antonio Papangelo and Michele Ciavarella
  Lubricants 2019, 7(10), 85; doi: 10.3390/lubricants7100085

Micromachines:

• “4D Printing of Multi-Hydrogels Using Direct Ink Writing in a Supporting Viscous Liquid”
  by Takuya Uchida and Hiroaki Onoe
  Micromachines 2019, 10(7), 433; doi: 10.3390/mi10070433
• “Enhanced Photocatalytic Performance and Mechanism of Au@CaTiO₃ Composites with Au Nanoparticles Assembled on CaTiO₃ Nanocuboids”
  by Yuxiang Yan, Hua Yang, Zao Yi, Ruishan Li and Xiangxian Wang
  Micromachines 2019, 10(4), 254; doi: 10.3390/mi10040254
• “Three-Dimensionally Structured Flexible Fog Harvesting Surfaces Inspired by Namib Desert Beetles”
  by Jun Kyu Park and Seok Kim
  Micromachines 2019, 10(3), 201; doi: 10.3390/mi10030201

Processes:

• “Accelerating Biologics Manufacturing by Modeling or: Is Approval under the QbD and PAT Approaches Demanded by Authorities Acceptable without a Digital-Twin?”
  by Steffen Zobel-Roos, Axel Schmidt, Fabian Mestmäcker, Mourad Mouellef, Maximilian Huter, Lukas Uhlenbrock, Martin Kornecki, Lara Lohmann, Reinhard Ditz and Jochen Strube
  Processes 2019, 7(2), 94; doi: 10.3390/pr7020094
• “Multiscale Agent-Based and Hybrid Modeling of the Tumor Immune Microenvironment”
  by Kerri-Ann Norton, Chang Gong, Samira Jamalian and Aleksander S. Popel
  Processes 2019, 7(1), 37; doi: 10.3390/pr7010037
• “Dynamic Flowsheet Model Development and Sensitivity Analysis of a Continuous Pharmaceutical Tablet Manufacturing Process Using the Wet Granulation Route”
  by Nirupaplava Metta, Michael Ghijs, Elisabeth Schäfer, Ashish Kumar, Philippe Cappuyns, Ivo Van Assche, Ravendra Singh, Rohit Ramachandran, Thomas De Beer, Marianthi Ierapetritou and Ingmar Nopens
  Processes 2019, 7(4), 234; doi: 10.3390/pr7040234

Sensors:

• “A Decentralized Privacy-Preserving Healthcare Blockchain for IoT”
  by Ashutosh Dhar Dwivedi, Gautam Srivastava, Shalini Dhar and Rajani Singh
  Sensors 2019, 19(2), 326; doi: 10.3390/s19020326
• “The Progress of Glucose Monitoring—A Review of Invasive to Minimally and Non-Invasive Techniques, Devices and Sensors”
  by Wilbert Villena Gonzales, Ahmed Toaha Mobashsher and Amin Abbosh
  Sensors 2019, 19(4), 800; doi: 10.3390/s19040800
• “Contact-Based Methods for Measuring Respiratory Rate”
  by Carlo Massaroni, Andrea Nicolò, Daniela Lo Presti, Massimo Sacchetti, Sergio Silvestri and Emiliano Schena
  Sensors 2019, 19(4), 908; doi: 10.3390/s19040908

World Electric Vehicle Journal:

• “Dynamic Wireless Power Transfer Charging Infrastructure for Future EVs: From Experimental Track to Real Circulated Roads Demonstrations”
  by Stéphane Laporte, Gérard Coquery, Virginie Deniau, Alexandre De Bernardinis and Nicolas Hautière
  World Electr. Veh. J. 2019, 10(4), 84; doi: 10.3390/wevj10040084

MDPI’s Young Investigator Awards recognize promising junior researchers, acknowledge their contributions, and enhance communication among scientists. We are proud to present the winners for the year 2021 in the “Engineering” category. The winners were selected by the journals’ editors.

We warmly congratulate the awarded Young Investigators for their outstanding contributions. MDPI will continue to provide support and recognition to the academic community.

Biosensors:

• Amay J. Bandodkar, North Carolina State University, USA.

ChemEngineering:

• Andrew S. Paluch, Miami University, USA.

Chemosensors:

• Mindy Levine, Ariel University, Israel.

Electronics:

• Amir H. Gandomi, University of Technology Sydney, Australia.

Journal of Marine Science and Engineering:

• Tiago Fazeres-Ferradosa, University of Porto, Portugal.

Machines:

• Chen Lv, Nanyang Technological University (NTU), Singapore;
• Ignacio Gonzalez-Prieto, University of Malaga (UMA), Spain;
• Ning Sun, Nankai University, China.

Processes:

• Anton Rassõlkin, Tallinn University of Technology, Estonia.

Sensors:

• Qammer H. Abbasi, Queen Mary University of London, UK;
• Chi Hwan Lee, Purdue University, USA.

We are proud to recognize the winners of MDPI’s 2021 Travel Awards in the “Engineering” category for their outstanding presentations and to present them with the prize.

MDPI journals regularly offer travel awards to encourage talented junior scientists to present their latest research at academic conferences in specific fields, which helps to increase their influence.

The winners mentioned below were carefully selected by the journal editors based on an outline of their research and the work to be presented at an academic conference.

We would like to warmly congratulate the winners of this year’s Travel Awards and wish them the greatest success with their future research endeavors. MDPI will continue to enhance communication among scientists.

Actuators:

• Matthew Wei Ming Tan, Nanyang Technological University, Singapore.

Applied Sciences:

• Márcia de Sousa Oliveira, University of León, Spain;
• Caroline Sarah Taylor, University of Sheffield, UK;
• Raquel Viveiros, NOVA University of Lisbon, Portugal;
• Alfonso González Briones, University of Salamanca, Spain;
• Alen Horvat, University Carlos III Madrid, Spain;
• Marie Švecová, University of Chemistry and Technology, Czech Republic;
• Venanzio Giannella, University of Salerno, Italy;
• Michaël Lobet, University of Namur, Belgium;
• Lam Thi Ngoc Tran, National Research Council, Italy;
• Hanfei Mei, University of South Carolina, USA.

Applied System Innovation:

• Mert Nakip, Polish Academy of Sciences, Poland.

Biosensors:

• Mengdi Bao, Rochester Institute of Technology, USA;

Yichi Su, Stanford University, USA.

Buildings:

• Karthik Panchabikesan, Concordia University, Canada;
• Xiaolei Yuan, Tongji University, China.

Chemosensors:

• Verónica Montes García, Université de Strasbourg & CNRS, France.

Electronics:

• Peng Hang, Nanyang Technological University, Singapore;
• Alfonso González Briones, University of Salamanca, Spain.

Fluids:

• Alberto Zingaro, Politecnico di Milano, Italy;
• Sarah E. Morris, Auburn University, USA.

Infrastructures:

• Angelo Aloisio, University of L’Aquila, Italy;
• André Filipe Castanheira Alves Furtado, University of Porto, Portugal.

Journal of Low Power Electronics and Applications:

• Tommaso Zanotti, University of Modena and Reggio Emilia, Italy.

Journal of Manufacturing and Materials Processing:

• Nagalingam Arun Prasanth, Rolls-Royce@NTU Corporate Lab, Singapore.

Machines:

• Muhammad Jamil, Nanjing University of Aeronautics and Astronautics (NUAA), China;
• Mariagrazia Tristano, Sheffield Hallam University, UK.

Processes:

• Michele Schlich, University of Cagliari, Italy;
• Álvaro Santana Mayor, University of La Laguna, Spain.

Sensors:

• Eleonora Macchia, Åbo Akademi University, Finland;
• Alfonso Gonzalez Briones, University of Salamanca, Spain;
• Saúl Vallejos Calzada, University of Burgos, Spain;
• Ana Novo, University of Vigo, Spain;
• Yalin Liu, Macau University of Science and Technology, China;
• Marilena Giglio, Politecnico of Bari, Italy;
• Yuzhi Shi, Nanyang Technological University (NTU), Singapore.

In order to acknowledge our reviewers, who so generously dedicate their time to reviewing papers and demonstrate diligence, professionalism, and timeliness when reviewing manuscripts, MDPI journals regularly offer outstanding reviewer awards to scholars who participate in the peer-review process.

We are proud to recognize the winners for the year 2021 in the “Engineering” category for their outstanding contributions among extensive competition by presenting them with an Outstanding Reviewer Award.

We would like to take this opportunity to congratulate all of the winners on their achievement. MDPI will continue to provide support and recognition to the academic community.

Actuators:

• Ryszard Dindorf, Kielce University of Technology, Poland.

Applied Sciences:

• Khaled Giasin, University of Portsmouth, UK;
• Jakub Krzysztof Grabski, University of Technology, Poland;
• Marcos Tostado-Véliz, University of Jaén, Spain;
• Luigi Pugliese, University of Calabria, Italy;
• Francesco Bennardo, University of Catanzaro, Italy;
• Heriberto Perez-Acebo, University of the Basque Country UPV/EHU, Spain.

Biosensors:

• Amir Hatamie, University of Gothenburg, Sweden.

Buildings:

• Francesco Fiorito, Polytechnic University of Bari, Italy;
• Paul G. O’Brien, York University, Canada.

Chemosensors:

• Verónica Montes García, University of Strasbourg, France.

Machines:

• Piotr Gierlak, Rzeszow University of Technology, Poland;
• Sebastian A. Nugroho, University of Michigan, USA;
• Viorel Paleu, Gheorghe Asachi Technical University of Iasi, Romania.

Processes:

• Marcin Dębowski, University of Warmia and Mazury in Olsztyn, Poland;
• Bartłomiej Zieniuk, Warsaw University of Life Sciences, Poland;
• Zbigniew Nadolny, Poznan University of Technology, Poland;
• Attila Egedy, University of Pannonia, Hungary;
• Seok-Ho Rhi, Chungbuk National University, Korea.

Sensors:

• Hojong Choi, Kumoh National Institute of Technology, Korea;
• Li Fu, Hangzhou Dianzi University, China;
• Leonardo De Mello Honorio, Federal University of Juiz De Fora Juiz De Fora, Brazil;
• Mario Versaci, Mediterranea University, Italy;
• Robertas Damasevicius, Kaunas University of Technology, Lithuania.

We are pleased to announce that Prof. Dr. Bijan Shirinzadeh has been appointed Section Editor-in-Chief of the “Sensors and Robotics” Section in Sensors (ISSN 1424-8220).

Prof. Dr. Bijan Shirinzadeh received a B.Eng. degree in mechanical engineering, a B.Eng. degree in aerospace engineering, and an M.S.Eng. degree in mechanical engineering from the University of Michigan, Ann Arbor, as well as a Ph.D. degree in mechanical engineering from the University of Western Australia (UWA). He is currently a full professor and the director of the Robotics and Mechatronics Research Laboratory (RMRL). His areas of expertise are automation, CAE/CAD/CAM/CAPP manufacturing, computational geometry, contact and quasistatic motion analysis, flexible fixturing, mechatronics, robotics and sensing, and control.

The following is a short Q&A with Prof. Dr. Shirinzadeh, who shared his vision for the journal with us, as well as his views of the research area and open access publishing:

1. What appealed to you about the journal that made you want to take the role as its Section Editor-in-Chief?
The journal has very professional and excellent administrative and editorial teams. The journal also has an excellent impact factor that has been steadily increasing. As a result, I was honored to be invited to be the Editor-in-Chief.

2. What is your vision for the Section?
The “Sensors and Robotics” Section is becoming increasingly important, given the developments of sensing and control strategies in all aspects of robotics. It is envisaged that the Section will endeavor to publish high-quality manuscripts from around the world and be a leading source of research reporting to established researchers as well as early career researchers.

3. What does the future of this field of research look like?
The fundamental and strategic research in this field will continue to grow, and this will enable the Section to publish leading-edge and innovative research in many areas such as robotics in medicine and rehabilitation, micro and nano technologies and systems, autonomous and complex systems, sensing in robotic and automated manufacturing, AI and ML-based sensing and robotics systems, and many more.

4. What do you think of the development of Open Access in the publishing field?
The development of Open Access in the publishing field has been excellent for readers, as it provides an easy avenue for researchers to obtain excellent publications in a free access environment. However, it has also been challenging for Open Access journals to compete with long-established journals for relevance, publication volume, quality manuscripts, and impact factor.

We warmly welcome Prof. Dr. Bijan Shirinzadeh in his role as Section Editor-in-Chief, and we look forward to him leading Sensors to achieve more milestones.

The 2021 citation metrics have been released in the Journal Citation Reports (JCR), and we’re pleased to announce the following results for MDPI journals:

For more information on Impact Factors and what it means to index academic journals, please visit our related blog posts.

* Journals given their first Impact Factor in 2022

Source: 2021 Journal Impact Factors, Journal Citation Reports ^TM (Clarivate, 2022)

Are you attending the 9th International Symposium on Sensor Science? Feel free to stop by MDPI's journal booth to have a chat with our colleagues from the journal Sensors.

This international conference, supported jointly by the Photonics Society of Poland, Warsaw University of Technology, and MDPI's Sensors (ISSN: 1424-8220), will bring together scientists from different areas to discuss important recent developments in sensor technology. It will represent a great opportunity for an in-person meeting of an interdisciplinary community aiming to discuss important breakthroughs in sensor technology and its related fields.

The Program can be accessed here.

The main topics of the conference include:

Chemical sensors;
Biosensors;
Physical sensors;
Optical/photonic sensors;
Sensor applications;
Specialty optical fibers for sensing;
Materials, microfluidics, configurations and strategies for sensing;
Distributed sensing in optical fibers;
Amorphous materials for sensor applications.

We look forward to your participation in this exciting event.

For questions related to this conference please contact Elena Gonzalez.

Conference: The 2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2022)
Date: 23–27 October 2022
Place: Kyoto, Japan

Machines (ISSN: 2075-1702) will be attending IROS 2022 as an exhibitor. This meeting will take place from 23 to 27 October in Kyoto, Japan.

IROS is one of the largest and most impactful robotics research conferences worldwide. It provides an international forum for the international robotics research community to explore the frontiers of science and technology in intelligent robots and smart machines. The theme of IROS 2022 is “Embodied AI for a Symbiotic Society”. In addition to technical sessions and multimedia presentations, IROS conferences also hold panel discussions, forums, workshops, tutorials, exhibits, and technical tours to encourage fruitful discussions among conference attendees.

The following MDPI journals will be represented:

• Machines;
• Robotics;
• Sensors;
• Computers;
• Applied Sciences;
• Systems;
• Technologies;
• Inventions;
• JMMP;
• Fractal Fract;
• ASI;
• Smart Cities;
• AI;
• Automation.

If you are planning to attend this conference, please do not hesitate to start an online conversation with us. Our delegates look forward to meeting you in person and answering any questions that you may have. For more information about the conference and virtual booth, please visit the following website: https://iros2022.org/.

The 2021 citation metrics have been officially released in Scopus!

We are pleased to announce that 182 MDPI journals are included, of which:

● 21 journals received their first CiteScore.
● 85% of journals increased their CiteScore from 2020.
● 155 journals (85%) ranked above average, in at least one category.

The following 65 MDPI journals (36%) ranked among the top 25% of journals, in at least one category:

Source: 2021 CiteScores™ (Elsevier)

We are pleased to announce the launch of a new initiative, the Special Issue Mentor Program.

This program intends to provide an opportunity for early career scientists to enhance their editing, networking, and organizational skills, and to work closely with our journal to gain more editorial experience. Early career scientists who have novel ideas for new Special Issues in Sensors (ISSN 1424-8220; IF 3.576) will act as Guest Editors under the mentorship of an experienced scientist; this mentor could be a member of the Editorial Board of Sensors or from other well-established research institutes or laboratories.

If you are interested in this opportunity, please send your Special Issue proposal to the Sensors Editorial Office (sensors@mdpi.com) or complete and submit the form at the following link: https://www.mdpi.com/journalproposal/sendproposalspecialissue/sensors. We will discuss the process (i.e., mentor collaboration, Special Issue topic feasibility analysis, among others) in further detail.

In addition to the new Special Issue Mentor Program, Sensors continues to welcome Special Issue proposals based on hot research topics.