Announcements

The purpose of our Best Paper Awards is to promote and recognize the most impactful contributions published within MDPI journals.

The academic editors of each journal carefully selected reviews and research papers through a rigorous judging process based on criteria such as the scientific merit, overall impact, and the quality of presentation of the papers published in the journal.

We are honored to present the winners in the “Engineering” category, who were selected amongst extensive competition, and congratulate the authors for their outstanding scientific publications.

Actuators:

• “Position Control of Pneumatic Actuators Using Three-Mode Discrete-Valued Model Predictive Control”
  by Haitao Qi, Gary M. Bone and Yile Zhang
  Actuators 2019, 8(3), 56; doi: 10.3390/act8030056
• “Review of Electrothermal Actuators and Applications”
  by Alissa Potekhina and Changhai Wang
  Actuators 2019, 8(4), 69; doi: 10.3390/act8040069

Batteries:

• “Pre-Lithiation Strategies for Rechargeable Energy Storage Technologies: Concepts, Promises and Challenges”
  by Florian Holtstiege, Peer Bärmann, Roman Nölle, Martin Winter and Tobias Placke
  Batteries 2018, 4(1), 4; doi: 10.3390/batteries4010004
• “A Critical Review of Lithium-Ion Battery Recycling Processes from a Circular Economy Perspective”
  by Omar Velázquez-Martínez, Johanna Valio, Annukka Santasalo-Aarnio, Markus Reuter and Rodrigo Serna-Guerrero
  Batteries 2019, 5(4), 68; doi: 10.3390/batteries5040068
• “Critical Review of the Use of Reference Electrodes in Li-Ion Batteries: A Diagnostic Perspective”
  by Rinaldo Raccichini, Marco Amores and Gareth Hinds
  Batteries 2019, 5(1), 12; doi: 10.3390/batteries5010012
• “Life Cycle Analysis of Lithium-Ion Batteries for Automotive Applications”
  by Qiang Dai, Jarod C. Kelly, Linda Gaines and Michael Wang
  Batteries 2019, 5(2), 48; doi 10.3390/batteries5020048
• “Design Strategies for High Power vs. High Energy Lithium Ion Cells”
  by Michael J. Lain, James Brandon and Emma Kendrick
  Batteries 2019, 5(4), 64; doi: 10.3390/batteries5040064

Chemosensors:

• “Influence of Humidity on NO₂-Sensing and Selectivity of Spray-CVD Grown ZnO Thin Film above 400 °C”
  by Roussin Lontio Fomekong and Bilge Saruhan
  Chemosensors 2019, 7(3), 42; doi: 10.3390/chemosensors7030042
• “Low Molecular Weight Fluorescent Probes (LMFPs) to Detect the Group 12 Metal Triad”
  by Ashley D. Johnson, Rose M. Curtis and Karl J. Wallace
  Chemosensors 2019, 7(2), 22; doi: 10.3390/chemosensors7020022

Journal of Marine Science and Engineering:

• “Marine Application of Fiber Reinforced Composites: A Review”
  by Felice Rubino, Antonio Nisticò, Fausto Tucci and Pierpaolo Carlone
  Mar. Sci. Eng. 2020, 8(1), 26; doi: 10.3390/jmse8010026
• “Numerical Simulation of Large Wave Heights from Super Typhoon Nepartak (2016) in the Eastern Waters of Taiwan”
  by Shih-Chun Hsiao, Hongey Chen, Han-Lun Wu, Wei-Bo Chen, Chih-Hsin Chang, Wen-Dar Guo, Yung-Ming Chen and Lee-Yaw Lin
  Mar. Sci. Eng. 2020, 8(3), 217; doi: 10.3390/jmse8030217
• “Development of Deterministic Artificial Intelligence for Unmanned Underwater Vehicles (UUV)”
  by Timothy Sands
  Mar. Sci. Eng. 2020, 8(8), 578; doi: 10.3390/jmse8080578

Lubricants:

• “Solid Lubrication with MoS₂: A Review”
  by Mohammad R. Vazirisereshk, Ashlie Martini, David A. Strubbe and Mehmet Z. Baykara
  Lubricants 2019, 7(7), 57; doi:10.3390/lubricants7070057
• “Investigations of the Friction Losses of Different Engine Concepts. Part 1: A Combined Approach for Applying Subassembly-Resolved Friction Loss Analysis on a Modern Passenger-Car Diesel Engine”
  by Christoph Knauder, Hannes Allmaier, David E. Sander and Theodor Sams
  Lubricants 2019, 7(5), 39; doi: 10.3390/lubricants7050039
• “A Discussion on Present Theories of Rubber Friction, with Particular Reference to Different Possible Choices of Arbitrary Roughness Cutoff Parameters”
  by Andrea Genovese, Flavio Farroni, Antonio Papangelo and Michele Ciavarella
  Lubricants 2019, 7(10), 85; doi: 10.3390/lubricants7100085

Micromachines:

• “4D Printing of Multi-Hydrogels Using Direct Ink Writing in a Supporting Viscous Liquid”
  by Takuya Uchida and Hiroaki Onoe
  Micromachines 2019, 10(7), 433; doi: 10.3390/mi10070433
• “Enhanced Photocatalytic Performance and Mechanism of Au@CaTiO₃ Composites with Au Nanoparticles Assembled on CaTiO₃ Nanocuboids”
  by Yuxiang Yan, Hua Yang, Zao Yi, Ruishan Li and Xiangxian Wang
  Micromachines 2019, 10(4), 254; doi: 10.3390/mi10040254
• “Three-Dimensionally Structured Flexible Fog Harvesting Surfaces Inspired by Namib Desert Beetles”
  by Jun Kyu Park and Seok Kim
  Micromachines 2019, 10(3), 201; doi: 10.3390/mi10030201

Processes:

• “Accelerating Biologics Manufacturing by Modeling or: Is Approval under the QbD and PAT Approaches Demanded by Authorities Acceptable without a Digital-Twin?”
  by Steffen Zobel-Roos, Axel Schmidt, Fabian Mestmäcker, Mourad Mouellef, Maximilian Huter, Lukas Uhlenbrock, Martin Kornecki, Lara Lohmann, Reinhard Ditz and Jochen Strube
  Processes 2019, 7(2), 94; doi: 10.3390/pr7020094
• “Multiscale Agent-Based and Hybrid Modeling of the Tumor Immune Microenvironment”
  by Kerri-Ann Norton, Chang Gong, Samira Jamalian and Aleksander S. Popel
  Processes 2019, 7(1), 37; doi: 10.3390/pr7010037
• “Dynamic Flowsheet Model Development and Sensitivity Analysis of a Continuous Pharmaceutical Tablet Manufacturing Process Using the Wet Granulation Route”
  by Nirupaplava Metta, Michael Ghijs, Elisabeth Schäfer, Ashish Kumar, Philippe Cappuyns, Ivo Van Assche, Ravendra Singh, Rohit Ramachandran, Thomas De Beer, Marianthi Ierapetritou and Ingmar Nopens
  Processes 2019, 7(4), 234; doi: 10.3390/pr7040234

Sensors:

• “A Decentralized Privacy-Preserving Healthcare Blockchain for IoT”
  by Ashutosh Dhar Dwivedi, Gautam Srivastava, Shalini Dhar and Rajani Singh
  Sensors 2019, 19(2), 326; doi: 10.3390/s19020326
• “The Progress of Glucose Monitoring—A Review of Invasive to Minimally and Non-Invasive Techniques, Devices and Sensors”
  by Wilbert Villena Gonzales, Ahmed Toaha Mobashsher and Amin Abbosh
  Sensors 2019, 19(4), 800; doi: 10.3390/s19040800
• “Contact-Based Methods for Measuring Respiratory Rate”
  by Carlo Massaroni, Andrea Nicolò, Daniela Lo Presti, Massimo Sacchetti, Sergio Silvestri and Emiliano Schena
  Sensors 2019, 19(4), 908; doi: 10.3390/s19040908

World Electric Vehicle Journal:

• “Dynamic Wireless Power Transfer Charging Infrastructure for Future EVs: From Experimental Track to Real Circulated Roads Demonstrations”
  by Stéphane Laporte, Gérard Coquery, Virginie Deniau, Alexandre De Bernardinis and Nicolas Hautière
  World Electr. Veh. J. 2019, 10(4), 84; doi: 10.3390/wevj10040084

MDPI’s Young Investigator Awards recognize promising junior researchers, acknowledge their contributions, and enhance communication among scientists. We are proud to present the winners for the year 2021 in the “Engineering” category. The winners were selected by the journals’ editors.

We warmly congratulate the awarded Young Investigators for their outstanding contributions. MDPI will continue to provide support and recognition to the academic community.

Biosensors:

• Amay J. Bandodkar, North Carolina State University, USA.

ChemEngineering:

• Andrew S. Paluch, Miami University, USA.

Chemosensors:

• Mindy Levine, Ariel University, Israel.

Electronics:

• Amir H. Gandomi, University of Technology Sydney, Australia.

Journal of Marine Science and Engineering:

• Tiago Fazeres-Ferradosa, University of Porto, Portugal.

Machines:

• Chen Lv, Nanyang Technological University (NTU), Singapore;
• Ignacio Gonzalez-Prieto, University of Malaga (UMA), Spain;
• Ning Sun, Nankai University, China.

Processes:

• Anton Rassõlkin, Tallinn University of Technology, Estonia.

Sensors:

• Qammer H. Abbasi, Queen Mary University of London, UK;
• Chi Hwan Lee, Purdue University, USA.

We are proud to recognize the winners of MDPI’s 2021 Travel Awards in the “Engineering” category for their outstanding presentations and to present them with the prize.

MDPI journals regularly offer travel awards to encourage talented junior scientists to present their latest research at academic conferences in specific fields, which helps to increase their influence.

The winners mentioned below were carefully selected by the journal editors based on an outline of their research and the work to be presented at an academic conference.

We would like to warmly congratulate the winners of this year’s Travel Awards and wish them the greatest success with their future research endeavors. MDPI will continue to enhance communication among scientists.

Actuators:

• Matthew Wei Ming Tan, Nanyang Technological University, Singapore.

Applied Sciences:

• Márcia de Sousa Oliveira, University of León, Spain;
• Caroline Sarah Taylor, University of Sheffield, UK;
• Raquel Viveiros, NOVA University of Lisbon, Portugal;
• Alfonso González Briones, University of Salamanca, Spain;
• Alen Horvat, University Carlos III Madrid, Spain;
• Marie Švecová, University of Chemistry and Technology, Czech Republic;
• Venanzio Giannella, University of Salerno, Italy;
• Michaël Lobet, University of Namur, Belgium;
• Lam Thi Ngoc Tran, National Research Council, Italy;
• Hanfei Mei, University of South Carolina, USA.

Applied System Innovation:

• Mert Nakip, Polish Academy of Sciences, Poland.

Biosensors:

• Mengdi Bao, Rochester Institute of Technology, USA;

Yichi Su, Stanford University, USA.

Buildings:

• Karthik Panchabikesan, Concordia University, Canada;
• Xiaolei Yuan, Tongji University, China.

Chemosensors:

• Verónica Montes García, Université de Strasbourg & CNRS, France.

Electronics:

• Peng Hang, Nanyang Technological University, Singapore;
• Alfonso González Briones, University of Salamanca, Spain.

Fluids:

• Alberto Zingaro, Politecnico di Milano, Italy;
• Sarah E. Morris, Auburn University, USA.

Infrastructures:

• Angelo Aloisio, University of L’Aquila, Italy;
• André Filipe Castanheira Alves Furtado, University of Porto, Portugal.

Journal of Low Power Electronics and Applications:

• Tommaso Zanotti, University of Modena and Reggio Emilia, Italy.

Journal of Manufacturing and Materials Processing:

• Nagalingam Arun Prasanth, Rolls-Royce@NTU Corporate Lab, Singapore.

Machines:

• Muhammad Jamil, Nanjing University of Aeronautics and Astronautics (NUAA), China;
• Mariagrazia Tristano, Sheffield Hallam University, UK.

Processes:

• Michele Schlich, University of Cagliari, Italy;
• Álvaro Santana Mayor, University of La Laguna, Spain.

Sensors:

• Eleonora Macchia, Åbo Akademi University, Finland;
• Alfonso Gonzalez Briones, University of Salamanca, Spain;
• Saúl Vallejos Calzada, University of Burgos, Spain;
• Ana Novo, University of Vigo, Spain;
• Yalin Liu, Macau University of Science and Technology, China;
• Marilena Giglio, Politecnico of Bari, Italy;
• Yuzhi Shi, Nanyang Technological University (NTU), Singapore.

In order to acknowledge our reviewers, who so generously dedicate their time to reviewing papers and demonstrate diligence, professionalism, and timeliness when reviewing manuscripts, MDPI journals regularly offer outstanding reviewer awards to scholars who participate in the peer-review process.

We are proud to recognize the winners for the year 2021 in the “Engineering” category for their outstanding contributions among extensive competition by presenting them with an Outstanding Reviewer Award.

We would like to take this opportunity to congratulate all of the winners on their achievement. MDPI will continue to provide support and recognition to the academic community.

Actuators:

• Ryszard Dindorf, Kielce University of Technology, Poland.

Applied Sciences:

• Khaled Giasin, University of Portsmouth, UK;
• Jakub Krzysztof Grabski, University of Technology, Poland;
• Marcos Tostado-Véliz, University of Jaén, Spain;
• Luigi Pugliese, University of Calabria, Italy;
• Francesco Bennardo, University of Catanzaro, Italy;
• Heriberto Perez-Acebo, University of the Basque Country UPV/EHU, Spain.

Biosensors:

• Amir Hatamie, University of Gothenburg, Sweden.

Buildings:

• Francesco Fiorito, Polytechnic University of Bari, Italy;
• Paul G. O’Brien, York University, Canada.

Chemosensors:

• Verónica Montes García, University of Strasbourg, France.

Machines:

• Piotr Gierlak, Rzeszow University of Technology, Poland;
• Sebastian A. Nugroho, University of Michigan, USA;
• Viorel Paleu, Gheorghe Asachi Technical University of Iasi, Romania.

Processes:

• Marcin Dębowski, University of Warmia and Mazury in Olsztyn, Poland;
• Bartłomiej Zieniuk, Warsaw University of Life Sciences, Poland;
• Zbigniew Nadolny, Poznan University of Technology, Poland;
• Attila Egedy, University of Pannonia, Hungary;
• Seok-Ho Rhi, Chungbuk National University, Korea.

Sensors:

• Hojong Choi, Kumoh National Institute of Technology, Korea;
• Li Fu, Hangzhou Dianzi University, China;
• Leonardo De Mello Honorio, Federal University of Juiz De Fora Juiz De Fora, Brazil;
• Mario Versaci, Mediterranea University, Italy;
• Robertas Damasevicius, Kaunas University of Technology, Lithuania.

Conference: International Conference of Non-Ferrous Materials 2022
Date: 15–17 July 2022
Place: Nanning, China
Booth: #A5

Materials (ISSN: 1996-1944) and Metals (ISSN: 2075-4701) will be attending the International Conference of Non-Ferrous Materials 2022 as exhibitors from 15 to 17 July in Nanning, China.

The International Conference of Non-Ferrous Materials is an important academic conference in the field of non-ferrous materials, sponsored by the Nonferrous Metals Society of China and co-organized by universities, research institutes, and enterprises engaged in the non-ferrous metal industry. It is held once a year. The meeting objectives are for China to be engaged in non-ferrous metal materials science research, the development and industrialization of experts, scholars, professors, and scientific as well as technical workers, the management of the relevant government department leaders, entrepreneurs, and other relevant personnel to build a communication platform, share the latest research results of materials, achieve the purpose of promoting each other, improving together, and, additionally, to improve the status and role of new materials in China's national economy and social development.

The following MDPI journals will be represented:

• Materials;
• Metals;
• Technologies;
• QuBS;
• JMMP;
• Alloys.

Please do not hesitate to reach out if you plan on attending this conference. Our delegates look forward to meeting you in person and answering any questions that you might have.

For more information about the conference, please visit the following website: https://www.huiyi-123.com/article/278-179.html.

Conference: The 2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2022)
Date: 23–27 October 2022
Place: Kyoto, Japan

Machines (ISSN: 2075-1702) will be attending IROS 2022 as an exhibitor. This meeting will take place from 23 to 27 October in Kyoto, Japan.

IROS is one of the largest and most impactful robotics research conferences worldwide. It provides an international forum for the international robotics research community to explore the frontiers of science and technology in intelligent robots and smart machines. The theme of IROS 2022 is “Embodied AI for a Symbiotic Society”. In addition to technical sessions and multimedia presentations, IROS conferences also hold panel discussions, forums, workshops, tutorials, exhibits, and technical tours to encourage fruitful discussions among conference attendees.

The following MDPI journals will be represented:

• Machines;
• Robotics;
• Sensors;
• Computers;
• Applied Sciences;
• Systems;
• Technologies;
• Inventions;
• JMMP;
• Fractal Fract;
• ASI;
• Smart Cities;
• AI;
• Automation.

If you are planning to attend this conference, please do not hesitate to start an online conversation with us. Our delegates look forward to meeting you in person and answering any questions that you may have. For more information about the conference and virtual booth, please visit the following website: https://iros2022.org/.

The 2021 citation metrics have been officially released in Scopus!

We are pleased to announce that 182 MDPI journals are included, of which:

● 21 journals received their first CiteScore.
● 85% of journals increased their CiteScore from 2020.
● 155 journals (85%) ranked above average, in at least one category.

The following 65 MDPI journals (36%) ranked among the top 25% of journals, in at least one category:

Source: 2021 CiteScores™ (Elsevier)

Conference: The 30th Mediterranean Conference on Control and Automation (MED 2022)

Date: 28 June–1 July 2022

Venue: Divani Apollon Palace & Thalasso, Athens, Greece

Machines (ISSN: 2075-1702) will be attending the 30th Mediterranean Conference on Control and Automation (MED 2022) as an exhibitor and will be sponsoring a Best Paper Award. This meeting will take place from 28 June to 1 July 2022, at the Divani Apollon Palace & Thalasso seaside resort in Vougliameni, Greece.

MED 2022 is co-sponsored by the IEEE Control Systems Society (CSS), the IEEE Robotics and Automation Society (RAS), and the ICUAS Association, Inc.

The theme of MED 2022 centers on control and automation challenges and opportunities in the 21^st century and focuses on system design for autonomy and resilience in high-confidence cyber physical systems. The international conference committee is soliciting technical papers as well as inviting sessions, workshops, and tutorial proposals.

The following MDPI journals will be represented:

• Machines;
• Systems;
• Robotics;
• Automation;
• Smart Cities;
• Applied sciences;
• Applied System Innovation (ASI);
• AI;
• Standards;
• Technologies;
• Big Data and Cognitive Computing (BDCC);
• Modelling.

If you are planning to attend this conference, please do not hesitate to start an online conversation with us. Our delegates look forward to meeting you in person and answering any questions you may have. For more information about the conference and virtual booth, please visit the following website: https://www.med-control.org/med2022/.

We are pleased to announce the launch of a new initiative, the Technologies (ISSN: 2227-7080) Special Issue Mentor Program.

This program will provide an opportunity for early career scientists to enhance their editing, networking, and organizational skills and to work closely with our journal to gain more editorial experience. Early career scientists with novel ideas for new Technologies Special Issues will act as Guest Editors under the mentorship of an experienced scientist; this mentor could be a member of the Editorial Board of Technologies, from other well-established research institutes or laboratories, etc.

Early career scientist’s responsibilities:

• Providing a CV, including a list of publications;
• Proposing a Special Issue title and a short introduction;
• Writing a brief promotion plan for the Special Issue;
• Writing an editorial for the online Special Issue;
• Reviewing and making decisions for submissions under the mentorship of our Editorial Board Members.

Mentor’s responsibilities:

• Conducting a final check before the Special Issue is published online;
• Co-editing the Special Issue with younger scholars and performing quality control of the publications in the Special Issue;
• Providing suggestions to younger scholars if they have any doubts or concerns regarding submissions;
• Organizing video calls with young scholars and the office regularly to discuss problems and improvement suggestions for the Special Issue.

Certificates and awards:

After the Special Issue closes, the Editorial Office will provide official certificates for all the mentors.

If you are interested in this opportunity, please send your Special Issue proposal to the Technologies Editorial Office (technologies@mdpi.com), and we will discuss the process (i.e., mentor collaboration, Special Issue topic feasibility analysis, etc.) in further detail.

In addition to the new Special Issue Mentor Program, Technologies will continue to welcome all Special Issue proposals focusing on hot research topics.

Technologies (ISSN: 2227-7080) is an international, peer-reviewed, open access journal singularly focusing on emerging scientific and technological trends and is published bimonthly online by MDPI. The Journal Citation Indicator (JCI) of Technologies is 0.73, which ranks 46/170 (Q2) in the category “Engineering and Multidisciplinary”, within the Journal Citation Reports (Clarivate, 2021); Technologies continues to be indexed within ESCI (Web of Science), Inspec, INSPIRE, and many other databases.

In order to support the scientific community and contribute to the faster distribution of important scientific research, Technologies has been working to facilitate academic conference collaborations.

Technologies is now seeking collaboration with additional academic conferences and is open to a diverse range of collaborations, such as media partnerships, awards, exhibitions, and publications, amongst others.

Technologies (ISSN: 2227-7080) is an international scientific journal focusing on emerging scientific and technological trends. The scope of Technologies includes, but is not limited to, the following:

• Quantum technologies (quantum information processing, quantum communication, quantum metrology and quantum lithography, etc.);
• Innovations in materials processing (casting, forming and machining, etc.), development (nanomaterials, porous materials, etc.), and applications (transportation sector, electronics, etc.);
• Construction technologies (construction materials technologies, structure design, maintenance and rehabilitation, etc.);
• Environmental technologies (technologies related to environmental monitoring, modeling and conservation, etc.);
• Biotechnologies (DNA/protein engineering, bioinformatics, imaging, analytical biotechnologies, biosafety or biosecurity, etc.);
• Medical technologies (technologies related to diagnosing, monitoring and treating, etc.);
• Computer and information technologies (hardware, complex processing techniques, user interface technologies, networking technologies, software, web-based technologies, developing and maintaining databases, the Internet and web development, computer-aided design (CAD), engineering graphics and computer-aided engineering (CAE), data mining, etc.).