- Article
The effects of brazing temperature and holding time on the interfacial evolution and shear strength of Cu/Zn-15Al/Al joints were investigated. Joints were prepared at 480–540 °C for 1–9 min and characterized by SEM, EDS, shear testing...
The effects of brazing temperature and holding time on the interfacial evolution and shear strength of Cu/Zn-15Al/Al joints were investigated. Joints were prepared at 480–540 °C for 1–9 min and characterized by SEM, EDS, shear testing...
In order to improve the cavitation performance of hydraulic machinery in the design stage, the response surface analysis method is used to study the influence of cascade density on the hydraulic characteristics and cavitation characteristics of a thr...
The hexagonal plastic collapse surface model has been explored as an effective approach for seismic response analysis in multi-degree-of-freedom (MDOF) structures. This study establishes the theoretical background of hexagonal analysis for multistory...
This paper presents an integrated modelling and decision-support reanalysis of a published 24-run experiment on diamond-spark grinding (electrical-discharge diamond grinding) of two hard alloys—the tungsten-free cermet TN-20 and the WC–Ti...
Mechanical system reliability analysis constitutes a primary research focus in the field of engineering. This study aims to address the issue of complex mechanical systems with intricate mechanisms and nonlinear reliability equations that are challen...
Experimental design is important for researchers and those in other fields to find factors affecting an experimental response. The response surface methodology (RSM) is a special experimental design used to evaluate the significant factors influencin...
Researchers conduct experiments to discover factors influencing the experimental subjects, so the experimental design is essential. The response surface methodology (RSM) is a special experimental design used to evaluate factors significantly affecti...
Gardens not only provide people with a place for leisure and relaxation, they also contribute to improving urban ecological environments and promoting social interactions and cohesion. Additionally, from a psychological perspective, gardens play a ro...
This paper focuses on the use of advanced optimization design strategies to improve the performance and service life of engine pistons, with emphasis on enhancing their stiffness, strength, and dynamic characteristics. As a core component of the engi...
The parameters considered in structural dynamic reliability analysis have strong uncertainties during machinery operation, and affect analytical precision and efficiency. To improve structural dynamic fuzzy reliability analysis, we propose the weight...
This paper investigates the effect of sodium hexametaphosphate (SHMP) depressant/dispersant in the presence of methyl isobutyl carbinol (MIBC) frother and soluble starch (SS) depressant on the flotation kinetics of talc ore. Emphasis is on a comparis...
This study presents a methodology for balancing surface integrity, densification, and hardness in selective laser melting (SLM) of 316L stainless steel. While SLM offers unparalleled geometric freedom, achieving optimal performance is often hindered...
Non-probabilistic reliability analysis has great developmental potential in the field of structural reliability analysis, as it is often difficult to obtain enough samples to construct an accurate probability distribution function of random variables...
Nanofluids can afford excellent thermal performance and have a major role in energy conservation aspect. In this paper, a sensitivity analysis has been performed by using response surface methodology to calculate the effects of nanoparticles on the e...
Sargassum spp. is an abundant marine biomass whose massive accumulation along Caribbean coasts has generated environmental and economic impacts. Its conversion into activated carbon (AC) provides an alternative for biomass utilization. In this study,...
Continental mixed shale oil reservoirs are characterized by strong lithological heterogeneity, complex reservoir architecture, and highly variable hydraulic fracture propagation, making it difficult to simultaneously maximize hydrocarbon recovery and...
Ammonia and propionate are known inhibitors of anaerobic methanogenesis at higher concentrations, and are likely to coexist in digesters treating high-strength wastewater. Therefore, this study was conducted to assess the effects of ammonia and propi...
Saccharomycopsis fibuligera, which produces enzymes like amylase and protease as well as flavor substances like β-phenyl ethanol and phenyl acetate, plays a crucial role in traditional fermented foods. However, this strain still lacks a high-den...
29 October 2022
Menopausal transition (MT) is a natural process in women from reproductive decline to aging. During this period, women present with an increased prevalence of psychological distress. The aim of this study was to investigate how resilience and family...
Background: Objective and subjective socioeconomic status capture distinct aspects of adolescents’ socioeconomic experience, but their joint associations with prosocial moral reasoning and self-acceptance remain unclear. This study examined obj...
Microreactors are essential for microchemical reactions owing to their high mass transfer efficiency, precise control of reaction time, easy amplification, and good safety performance. These characteristics provide several advantages, including short...
To address high-precision robotic abrasive belt grinding of 42CrMo steel, this study adopted the orthogonal central composite design with grinding force, feed rate, and rotational speed as key parameters, establishing and verifying regression models...
This paper introduces a multi-objective optimization problem (MPO) for the forming process parameters of disc forgings using grey relational analysis (GRA) and the response surface methodology (RSM). Firstly, an experimental design based on the Box&n...
This study aims to propose a central composite design (CCD) combined with response surface methodology (RSM) to create a statistical experimental design. A new parametric optimization of entropy generation is presented. The flow behavior of magnetohy...
Efficiently managing multiple process parameters is critical for achieving optimal performance in additive manufacturing. This study investigates the relationship between eight key parameters in fused deposition modeling (FDM) and their impact on res...
Wastewater treatment plants (WWTPs) are high-energy-consuming units. Reasonable operation strategies can enable WWTPs to meet discharge standards while reducing the operating cost. In this study, the activated sludge model 2d (ASM2d), Pareto analysis...
This study investigates the dynamic characteristics of three-dimensional (3D) printed acrylonitrile butadiene styrene (ABS) cantilever beams using Experimental Modal Analysis (EMA). The effects of Fused Deposition Modelling (FDM) process parameters&m...
The objective of this study is to investigate the impacts of steam heat treatment parameters (e.g., temperature, time, and pressure) on the impact toughness of rattan (Calamus simplicifolius). The Box–Behnken design response surface analysis wa...
In this study, an optimization approach was employed to determine the optimal main parameters that improve the performance of functionally graded composites manufactured using a combination of stirring and horizontal centrifugal casting. Pure aluminu...
Based on the cumulative risk model and cognitive appraisal theory, this study examined the complex relationships between economic pressure, emotional neglect, and anxiety among left-behind children (LBC), focusing on the mediating role of perceived d...
This study determined the optimal nitrogen–phosphorus–potassium (N-P-K) ratios for maximizing growth performance in spinach (Spinacia oleracea), bok choy (Brassica rapa subsp. chinensis), and Chinese cabbage (Brassica rapa pekinensis). A...
The production of syngas from sewage sludge through steam gasification was investigated using an Aspen Plus simulation, Response Surface Methodology (RSM), exergy analysis, and techno-economic assessment framework. An Aspen Plus model was developed a...
In the present work, the optimization of ceramic-based composite WC(Co,Ni) welds by laser cladding was carried out using response surface methodology based on finite element analysis. The heat distribution and temperature field of laser-melted WC(Co,...
In the present research, the authors have attempted to examine the compressive strength of conventional concrete, which is made using different aggregate sizes and geometries considering various curing temperatures. To this end, different aggregate g...
This paper presents a multi-objective design optimization of a power transformer to find the optimal geometry of its core and the low- and high-voltage windings, representing the minimum power losses and the minimum core and copper weights. The optim...
This study explores the influence of congruence and incongruence in father–mother co-parenting on adolescent depression, as well as the mediating effect of self-esteem. A total of 1389 adolescents completed questionnaires assessing their levels...
The seed metering process of a fluted force-feed seeder was simulated using the Discrete Element Method and its parameters optimized using the Box–Behnken Design of Experiments and the Response Surface Method. The rotational speed of the feed r...
In order to further enhance the extraction yield of total flavonoids from Scutellaria baicalensis Georgi, the extraction process was optimized, and its composition and antioxidant activity were also analyzed. Through single-factor and response surfac...
Deoxyadenosine triphosphate (dATP) is an important biochemical molecule. In this paper, the synthesis of dATP from deoxyadenosine monophosphate (dAMP), catalyzed by Saccharomyces cerevisiae, was studied. By adding chemical effectors, an efficient ATP...
In this study, the fuel properties and engine performance of blended palm biodiesel-diesel using diethyl ether as additive have been investigated. The properties of B30 blended palm biodiesel-diesel fuel were measured and analyzed statistically with...
Damaged starch typically arises from mechanical damage caused by the action of the roller mills during the wheat flour milling process. The content of resulting damaged starch in the flour significantly influences its characteristics, emphasizing the...
The numerical investigation of magneto-hydrodynamic (MHD) mixed convection flow and entropy formation of non-Newtonian Bingham fluid in a lid-driven wavy square cavity filled with nanofluid was investigated by the finite volume method (FVM). The nume...
Welding induced distortion causes dimensional inaccuracies in parts being produced and assembly fit-up problems during manufacturing. In this study, a framework is proposed to mitigate weld distortion at the design stage. A sequential approach is ado...
Centrifugal tests provide an efficacious experimental process to predict the behavior of deep excavations, and numerical models are indispensable for demonstrating the test results and analyzing the engineering demand parameters. Uncertainty in mater...
This paper proposes an integrated numerical–experimental methodology for the durability assessment and optimisation of a passenger-car rear axle. A dedicated rear-suspension durability test bench was designed to impose a controlled cyclic verti...
An optimization of the composition of polymer inclusion membrane (PIM)-based optodes, and their exposure times to metal ion solutions (Hg(II), Cd(II), and Pb(II)) was performed using two different chromophores, diphenylthiocarbazone (dithizone) and 1...
High-temperature proton-exchange membrane fuel cells (HT-PEMFCs) generate useful thermal energy that can be recovered for additional power production. This study investigates an integrated HT-PEMFC–organic Rankine cycle (ORC) system by combinin...
Aluminum alloy is the second most abundant metal on Earth, known for its wide range of utilization in commercial goods due to its heat capacity and tensile strength. This study examines the effect of nose radius on the turning process. Further, it ex...
In order to optimize the extraction of gigantol from Dendrobium officinale, the influence of methanol concentration, ultrasonic temperature, and liquid ratio on extraction efficiency was analysed by the response surface analysis method. The results s...
Accurate, real-time monitoring of meat freshness is essential for reducing food waste and safeguarding consumer health, yet conventional methods rely on costly, laboratory-grade spectroscopy or destructive analyses. This work presents a low-cost elec...
of 162