Building Structures
A section of Buildings (ISSN 2075-5309).
Section Information
This section of Buildings aims to gather and disseminate research work related to “Building Structures”, as well as to stimulate discussion among researchers, academia, and industry, encouraging the development and application of innovative structural systems and approaches in buildings. This Section welcomes papers comprising experimental studies, numerical studies, and case studies. All topics related to the design, construction, assessment, and retrofitting of building structures are welcome in this section. Download Section Flyer
Keywords
- structural analysis
- structural modelling
- structural software engineering
- experimental studies
- structural design codes
- structural repair
- structural retrofitting and strengthening
- risk management
- seismic engineering
- wind engineering
- monitoring, sensors, smart structures
- structural control
- artificial intelligence
- neural networks
- virtual reality and visualization technologies
- database management
- BIM
- digital twins
- new structural systems
- innovation in structural engineering
- structural protection systems
- case studies
Editorial Board
Topical Advisory Panel
Special Issues
Following special issues within this section are currently open for submissions:
- High-Performance Composite Structures: Numerical Simulation, Experimental and Theoretical Studies (Deadline: 15 July 2025)
- Structural Health Monitoring, Damage Detection and Long-Term Performance (Deadline: 20 July 2025)
- Research on the Durability of Reinforced Concrete Structures (Deadline: 20 July 2025)
- Damping Control of Building Structures and Bridge Structures (Deadline: 20 July 2025)
- Structural Resilience and Sustainable Development of Reinforced Concrete Structures (Deadline: 20 July 2025)
- Open Issues in Building Conservation (Deadline: 30 July 2025)
- Performances of Structural Concrete: Data-Driven Analysis Using AI, Numerical and Experimental Investigation (Deadline: 30 July 2025)
- High-Performance Steel–Concrete Composite/Hybrid Structures (Deadline: 31 July 2025)
- Research on Structural Analysis and Design of Civil Structures (Deadline: 31 July 2025)
- Seismic Performance and Durability of Engineering Structures (Deadline: 31 July 2025)
- Advanced Methodologies and Technologies in Structural Modelling, Identification and Monitoring of Existing Structures—2nd Edition (Deadline: 31 July 2025)
- The Damage and Fracture Analysis in Rocks and Concretes (Deadline: 31 July 2025)
- Advancing Urban Resilience Through Enhanced Disaster Response and Recovery (Deadline: 31 July 2025)
- Building Safety Assessment and Structural Analysis (Deadline: 31 July 2025)
- Solid Mechanics as Applied to Civil Engineering (Deadline: 31 July 2025)
- New Challenges of Underground Structures in Earthquake Engineering (Deadline: 31 July 2025)
- Experiments, Design and Practice Innovations in Geotechnical Engineering and Underground Space (Deadline: 31 July 2025)
- Building Foundation Analysis: Soil–Structure Interaction—2nd Edition (Deadline: 31 July 2025)
- Advanced Research on Seismic Performance of Steel Structures (Deadline: 31 July 2025)
- Computational Mechanics Analysis of Composite Structures (Deadline: 10 August 2025)
- Advanced Studies on Strength and Cracking of Prestressed and Reinforced Concrete Structures (Deadline: 20 August 2025)
- Research on Performance of Buildings Structures and Materials (Deadline: 20 August 2025)
- Numerical and Experimental Research on Steel-Concrete Composite Structural Systems (Deadline: 20 August 2025)
- Recent Studies in Static and Dynamic Behaviour of Engineering Structures (Deadline: 20 August 2025)
- Capacity Assessment of Corroded Reinforced Concrete Structures (Deadline: 20 August 2025)
- Structural Assessment and Strengthening of Masonry Structures (Deadline: 20 August 2025)
- Advances in Soil-Structure Interaction for Building Structures (Deadline: 20 August 2025)
- Research on the Structural Mechanics of Steel–Concrete Composite Structures (Deadline: 20 August 2025)
- Mechanical Properties of Advanced Metal Structures in Civil Infrastructure (Deadline: 20 August 2025)
- Structural Safety Evaluation and Health Monitoring (Deadline: 20 August 2025)
- Structural Health Monitoring and Intelligent Safety Assessment in Civil Engineering (Deadline: 20 August 2025)
- Seismic Performance and Design of Retaining Structures (Deadline: 20 August 2025)
- Advances in Modern Structural Engineering: From Materials to Building Structures (Deadline: 25 August 2025)
- Research on Soil–Structure Interaction for Civil Structures (Deadline: 29 August 2025)
- Non-linear Behavior and Design of Steel Structures (Deadline: 30 August 2025)
- Building Structural Design: Blast Analysis and Progressive Collapse Control (Deadline: 31 August 2025)
- Earthquake Resistant and Vibration Control of Concrete Structures (Deadline: 31 August 2025)
- Advances in Nondestructive Testing of Structures (Deadline: 31 August 2025)
- Challenges in Structural Repairs and Renovations (Deadline: 31 August 2025)
- Research on Timber and Timber–Concrete Buildings (Deadline: 31 August 2025)
- Theory and Innovative Applications of Ultra-High Performance Concrete (UHPC) (Deadline: 31 August 2025)
- Lightweight and Large-Span Structures: Innovative Structural Forms and Computational Methods (Deadline: 31 August 2025)
- Structural Vibration Analysis and Control in Civil Engineering (Deadline: 31 August 2025)
- Recent Advances in Structural Health Monitoring (Deadline: 1 September 2025)
- Performance Analysis of Timber Composite Structures (Deadline: 15 September 2025)
- Dynamic Response Analysis of Structures Under Wind and Seismic Loads (Deadline: 15 September 2025)
- Brittle Behaviour of High-Performance Concrete Structures (Deadline: 30 September 2025)
- Innovation of Seismic Behavior in Structural Engineering (Deadline: 30 September 2025)
- Advances and Applications in Structural Vibration Control (Deadline: 30 September 2025)
- Modeling and Testing the Performance of Masonry Structures (Deadline: 30 September 2025)
- Assessment and Retrofit of Reinforced Concrete Structures (Deadline: 30 September 2025)
- Mechanical Properties of High-Performance Bimetallic Steels (Deadline: 30 September 2025)
- Concrete in the Digital Age: Advanced Simulations for Structural Innovation (Deadline: 30 September 2025)
- Strengthening and Rehabilitation of Structures or Buildings (Deadline: 30 September 2025)
- Performance Analysis of Cross-Laminated Timber (CLT) Constructions Under Current and Future Climates (Deadline: 30 September 2025)
- Seismic Prevention and Response Analysis of Buildings (Deadline: 30 September 2025)
- High-Rise Building Design: Phenomena and Analyses Involved (Deadline: 30 September 2025)
- Analysis, Calculations, Evaluations, and Controls of High-Rise/Large-Span Structures (Deadline: 30 September 2025)
- Seismic Performance of Seismic-Resilient Structures (Deadline: 30 September 2025)
- Performance-Based Seismic Design, Structural Health Monitoring, and Deformation Prediction for Building Structures (Deadline: 30 September 2025)
- Advances in Building Structure Analysis and Health Monitoring (Deadline: 30 September 2025)
- Soil–Structure Interactions for Civil Infrastructure (Deadline: 30 September 2025)
- Analysis of Performance in Green Concrete Structures (Deadline: 30 September 2025)
- Novel Steel and Steel-Concrete Composite Structures (Deadline: 10 October 2025)
- Study on the Durability of Construction Materials and Structures (Deadline: 10 October 2025)
- Building Structure Health Monitoring and Damage Detection (Deadline: 10 October 2025)
- AI-Powered Structural Health Monitoring: Innovations and Applications (Deadline: 10 October 2025)
- Research on Recent Developments in Building Structures (Deadline: 20 October 2025)
- Research on the Seismic Performance of Reinforced Concrete Structures (Deadline: 20 October 2025)
- Applications of Computational Methods in Structural Engineering (Deadline: 20 October 2025)
- Buildings and Infrastructures under Natural Hazards (Deadline: 20 October 2025)
- Innovative Solutions for Enhancing Seismic Resilience of Buildings (Deadline: 20 October 2025)
- Advances and Applications in Timber Structures (Deadline: 20 October 2025)
- New Insights into the Seismic Behaviour of Buildings (Deadline: 20 October 2025)
- Geoinfrastructure: A Comprehensive Review of Current Trends, Challenges and Future Perspectives (Deadline: 20 October 2025)
- Structural Response of Buildings in Fire (Deadline: 30 October 2025)
- Recent Developments in Structural Health Monitoring (Deadline: 31 October 2025)
- Structural Health Monitoring and Vibration Control (Deadline: 31 October 2025)
- Structural Health Monitoring and Damage Identification of Engineering Structures (Deadline: 31 October 2025)
- Engineering Mathematics in Structural Control and Monitoring (Deadline: 31 October 2025)
- Experimental and Theoretical Studies on Steel and Concrete Structures (Deadline: 31 October 2025)
- Mechanics of Masonry Towers (Deadline: 31 October 2025)
- Wind Load Effects on High-Rise and Long-Span Structures: 2nd Edition (Deadline: 31 October 2025)
- Advances in Structural Techniques for Prefabricated Modular Buildings (Deadline: 31 October 2025)
- Study on Wind Load of High-Rise and Long-Span Structures Facilitated or Assisted by AI Techniques (Deadline: 31 October 2025)
- Heritage Architecture Sustainable Management: Analysis, Conservation, and Refurbishment (Deadline: 31 October 2025)
- Underground Space Construction and Digital Management (Deadline: 31 October 2025)
- Innovative Materials and Technologies for Sustainable Structural Engineering (Deadline: 31 October 2025)
- Building Structural Health: Advanced Technologies and Applications in Monitoring and Evaluation (Deadline: 31 October 2025)
- Advanced Damage Detection and State Monitoring Technologies for Engineering Structures (Deadline: 10 November 2025)
- Cold-Formed Steel Structures (Deadline: 30 November 2025)
- Structural Health Monitoring Through Advanced Artificial Intelligence (Deadline: 30 November 2025)
- Structural Performance of Building Steel (Deadline: 30 November 2025)
- Research on Building Foundations and Underground Engineering (Deadline: 30 November 2025)
- Advances in Steel and Composite Structures (Deadline: 30 November 2025)
- Advances in Green, Low-Carbon, High-Performance, and Intelligent Building Materials and Structures (Deadline: 30 November 2025)
- Structural Health Monitoring and Intelligent Operation Maintenance of Concrete and Steel Structures (Deadline: 30 November 2025)
- Investigations of Steel–Concrete Composite Structures Under Static and Dynamic Loading Conditions (Deadline: 30 November 2025)
- Advanced Structural Techniques for Seismic and Wind Resilience: Innovations in Safety and Performance (Deadline: 30 November 2025)
- Structural Health Monitoring and Damage Detection in Civil Engineering (Deadline: 30 November 2025)
- Research on Durability, Resilience and Stability of Building Structures (Deadline: 30 November 2025)
- Advanced Research on Steel Joints and Structures: Mechanical Behavior, Performance Analysis, and Stability Design (Deadline: 30 November 2025)
- Foundation Treatment and Building Structural Performance Enhancement (Deadline: 20 December 2025)
- Emerging Trends in Machine Learning for Structural Engineering: Innovations and Applications (Deadline: 20 December 2025)
- Research in Structural Control and Monitoring (Deadline: 20 December 2025)
- Low-Carbon Concrete Structures Incorporating Sustainable Pozzolan and Recycled Materials (Deadline: 20 December 2025)
- Innovative Approaches for Seismic Performance Analysis and Design in Building Structures (Deadline: 20 December 2025)
- Advanced Analysis and Design for Steel Structure Stability (Deadline: 30 December 2025)
- Steel Plate Shear Walls (Deadline: 30 December 2025)
- Transformable and Modular Building Systems: Mechanics, Design, and Applications Innovations (Deadline: 30 December 2025)
- Structural Safety and Stability of Buildings: Novel Methods, Materials, and Measurements—2nd Edition (Deadline: 30 December 2025)
- Dynamic Response of Structures (Deadline: 31 December 2025)
- Studies on Metal Materials and Their Applications in Building Structures (Deadline: 31 December 2025)
- Recent Scientific Developments on the Mechanics of Masonry Structures (Deadline: 31 December 2025)
- Sustainability in Building Structures: Optimization, Strengthening and Rehabilitation (Deadline: 31 December 2025)
- Timber–Concrete Composite Structures: Property Analysis, Stability Design and Applications (Deadline: 31 December 2025)
- Geomechanics and Geotechnical Engineering Problems in the Design and Construction of Underground Buildings—2nd Edition (Deadline: 31 December 2025)
- Building Vibration and Soil Dynamics—2nd Edition (Deadline: 31 December 2025)
- Advances in Building Foundation Engineering and Underground Structures (Deadline: 31 December 2025)
- The Mechanical Properties and Failure Behaviors of Underground Structures (Deadline: 31 December 2025)
- Recent Developments and Applications in Vehicle-Assisted Structural Health Monitoring for Infrastructures (Deadline: 31 December 2025)
- Mechanical Properties and Durability of Concrete Materials and Structures (Deadline: 31 December 2025)
- Bionic Materials and Structures in Civil Engineering (Deadline: 31 December 2025)
- Application of Experiment and Simulation Techniques in Engineering (Deadline: 31 December 2025)
- Advances in Mechanical Behavior of Prefabricated Structures (Deadline: 31 December 2025)
- Innovations in Static and Dynamic Performance of Steel and Composite Structures (Deadline: 31 December 2025)
- Advances in Vibration Control of Civil Structures (Deadline: 31 December 2025)
- Reliability and Risk Assessment of Building Structures (Deadline: 31 December 2025)
- Disaster Prevention and Resilient Structures in Engineering Construction (Deadline: 31 December 2025)
- Innovative Performance-Based Risk Assessment and Bio-Composite Applications for Disaster-Resilient Structures (Deadline: 31 December 2025)
- New Technology of Green Intelligent Construction and Risk Assessment in Architectural Structures (Deadline: 10 January 2026)
- Advanced Concrete Structures: Structural Behaviors and Design Methods—2nd Edition (Deadline: 10 January 2026)
- Structural Performance and Damage Assessment of Reinforced Concrete Structures Exposed to High Strain Rate Loads (Deadline: 10 January 2026)
- Seismic Response Analysis of Underground Structure (Deadline: 15 January 2026)
- Seismic Design and Strengthening of Reinforced Concrete, Masonry and Steel Structures with Innovative Materials and Devices (Deadline: 20 January 2026)
- Engineering Disaster Prevention and Performance Improvement (Deadline: 30 January 2026)
- Structural Health Monitoring and Damage Detection Based on Vibration (Deadline: 30 January 2026)
- Stability and Performance of Building Foundations (Deadline: 30 January 2026)
- Research on Intelligent Geotechnical Engineering (Deadline: 31 January 2026)
- The Vibration Control of Building Structures (Deadline: 31 January 2026)
- Seismic Resistance and Vulnerability Assessments of Building Structures (Deadline: 31 January 2026)
- Advancements in Smart Civil Engineering: Durability, Seismic Resilience, Construction, and Composite Repair Technologies (Deadline: 31 January 2026)
- Building Structures Under Fire, Structural Dynamics and Material Degradation (Deadline: 31 January 2026)
- Advanced Technologies for Construction and Maintenance of Engineering Structures (Deadline: 31 January 2026)
- The Latest Research on Building Materials and Structures (Deadline: 10 February 2026)
- Structural Analysis of Underground Space Construction: 2nd Edition (Deadline: 10 February 2026)
- Seismic Assessment of Unreinforced Masonry Buildings (Deadline: 28 February 2026)
- Corrosion and Seismic Resistance of Structures (Deadline: 28 February 2026)
- Research on Key Technologies for Green Construction and Safe Operation and Maintenance of Tunnels and Underground Engineering (Deadline: 28 February 2026)
- Extreme Performance of Composite and Protective Structures (Deadline: 28 February 2026)
- Research on Innovative Technologies for Theory, Design, Construction, and Maintenance of Building Engineering and Underground Spaces in Extreme Environments (Deadline: 28 February 2026)
- Green, Resilient, and Sustainable Composite Structures: Development, Design, and Construction: 2nd Edition (Deadline: 28 February 2026)
- Research on Emerging Technologies for Structural Design, Inspection, and Maintenance (Deadline: 20 March 2026)
- Recent Scientific Developments in Structural Damage Identification (Deadline: 31 March 2026)
- Advances in Steel-Concrete Composite Structure—2nd Edition (Deadline: 31 March 2026)
- Research on State Assessment and Strengthening Technique of Building Structure (Deadline: 30 April 2026)
- Advances Testing and Computation Methods for Disaster Mitigation of Engineering Structures—2nd Edition (Deadline: 30 April 2026)
- Intelligent Materials and Structural Health: Mechanics, Damage Detection, Performance Enhancement, and AI-Driven Techniques (Deadline: 1 May 2026)
- New Reinforcement Technologies Applied in Slope and Foundation (Deadline: 20 May 2026)
- Urban Underground Space Design: Structural Stability and Mechanics Analysis—2nd Edition (Deadline: 31 May 2026)
- Design, Construction and Maintenance of Underground Structures—2nd Edition (Deadline: 28 September 2026)
- Advanced Prediction and Mitigation of Building Vibrations and Noise: Integrating Safety and Sustainability (Deadline: 31 October 2026)
- Performance Assessment and Enhancement of Infrastructure Under Multi-Hazard Conditions (Deadline: 31 December 2026)
Topical Collections
Following topical collections within this section are currently open for submissions:
- Advanced Concrete Structures in Civil Engineering
- Assessment, Reconstruction and Decision Procedures for the Preservation of Existing Structures after Earthquakes (Closed)
- Buildings and Fire Safety
- Innovation in Structural Analysis and Dynamics for Constructions
- Non-linear Modelling and Analysis of Buildings
- Seismic Safety Assessment and Strengthening of Existing Constructions
- Structural Analysis for Earthquake-Resistant Design of Buildings
- Structural Dynamics and Analysis of Civil Structures and Engineering Materials
- The Methods, Tools and Techniques for the Preservation of Existing Structures
