Skip to Content

439 Results Found

  • Article
  • Open Access
1 Citations
1,054 Views
17 Pages

Tangential turning produces an asymmetric cutting-force system that may cause tool and workpiece deflection, leading to cylindricity, coaxiality, and roundness deviations in practice. This study investigates the relationships between three cutting fo...

  • Article
  • Open Access
11 Citations
3,735 Views
11 Pages

20 January 2022

This paper investigates the vibration enhancement or weakening effect caused by permanent magnet synchronous motor radial and tangential force formed by tooth harmonics. First, the analytical expressions of an air gap magnetic field are deduced based...

(This article belongs to the Special Issue Design, Analysis and Control of Permanent Magnet Machines)
  • Article
  • Open Access
856 Views
29 Pages

22 October 2025

The piezoelectric coating structure constitutes the main configuration of contemporary energy harvesting systems, and its development requires accurate modeling of electromechanical coupling behavior under mechanical loads. The present work prepares...

(This article belongs to the Special Issue Intelligent Energy Technical Studies About Automobiles, New Energy Vehicles and Key Systems in the Energy Field)
  • Article
  • Open Access
7 Citations
6,989 Views
25 Pages

Normal and Tangential Drag Forces of Nylon Nets, Clean and with Fouling, in Fish Farming. An Experimental Study

  • Yarko Niño,
  • Kevin Vidal,
  • Aldo Tamburrino,
  • Luis Zamorano and ,
  • Juan Felipe Beltrán,
  • Gustavo Estay and
  • Aldo Muñoz
  • + 2 authors+ 0 author

9 August 2020

Experiments in a laboratory tank have provided measurements of the normal and tangential drag forces exerted on flat nets for different flow conditions. From those forces, normal and tangential drag coefficients of the nets have been obtained as func...

(This article belongs to the Special Issue Industrial and Environmental Fluid Mechanics)
  • Proceeding Paper
  • Open Access
2,785 Views
14 Pages

Analytical, Numerical, and Experimental Analysis of Tangential Attraction and Repulsion Forces Between Parallel Magnets in an Automotive Mechanical System

  • Carmelo Serraino,
  • Tommaso Carditello,
  • Luca Dusini,
  • Alberto Nicoletta and ,
  • Dario Santonocito and
  • Giacomo Risitano
  • + 1 author+ 0 author

18 February 2025

This study highlights the importance of magnets in the advancement of automotive technology, focusing on the forces of attraction and repulsion between two magnets in relative tangential motion. The magnets were tested using a tensile machine develop...

(This article belongs to the Proceedings of The 53rd Conference of the Italian Scientific Society of Mechanical Engineering Design)
  • Article
  • Open Access
3 Citations
3,314 Views
16 Pages

18 November 2022

The cutting forces that occur during machining cause static and dynamic deformations of the machine–tool–workpiece system. In general, the cutting force is spatial. However, knowledge of the tangential component of the cutting force is cr...

(This article belongs to the Section Machines Testing and Maintenance)
  • Article
  • Open Access
693 Views
25 Pages

This study investigates the performance of tangential turning in machining two industrially relevant materials, 42CrMo4 low-alloy steel and X5CrNi18-10 austenitic stainless steel. A full factorial experimental design was employed to evaluate the effe...

(This article belongs to the Special Issue Innovative Manufacturing Engineering 2024—Processes, Machines, Tooling and Systems Integration)
  • Article
  • Open Access
34 Citations
10,000 Views
24 Pages

Evaluation of a Blade Force Measurement System for a Vertical Axis Wind Turbine Using Load Cells

  • Morgan Rossander,
  • Eduard Dyachuk,
  • Senad Apelfröjd,
  • Kristian Trolin and ,
  • Anders Goude,
  • Hans Bernhoff and
  • Sandra Eriksson
  • + 2 authors+ 0 author

18 June 2015

Unique blade force measurements on an open site straight-bladed vertical axis wind turbine have been performed. This paper presents a method for measuring the tangential and normal forces on a 12-kW vertical axis wind turbine prototype with a three-b...

(This article belongs to the Collection Wind Turbines)
  • Article
  • Open Access
3 Citations
2,484 Views
15 Pages

Railcar Dynamic Response during Braking Maneuvers Based on Frequency Analysis

  • Gerardo Hurtado-Hurtado,
  • Luis Morales-Velazquez,
  • Frank Otremba and
  • Juan C. Jáuregui-Correa

24 March 2023

The dynamic response of a vehicle during braking is influenced by the tangential forces developed at the wheel-rail’s contact surface. The friction coefficient affects the load transfer from the wheel’s tread to the vehicle. In this work,...

(This article belongs to the Special Issue Recent Advances in Vehicle-Track-Ground Coupling Dynamics and Railway-Induced Ground Vibration)
  • Article
  • Open Access
14 Citations
11,879 Views
15 Pages

6 December 2011

This paper describes the design and calibration of a thimble that measures the forces applied by a user during manipulation of virtual and real objects. Haptic devices benefit from force measurement capabilities at their end-point. However, the heavy...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
5 Citations
4,373 Views
14 Pages

Application of High-Photoelasticity Polyurethane to Tactile Sensor for Robot Hands

  • Masahiko Mitsuzuka,
  • Jun Takarada,
  • Ikuo Kawahara,
  • Ryota Morimoto and ,
  • Zhongkui Wang,
  • Sadao Kawamura and
  • Yoshiro Tajitsu
  • + 2 authors+ 0 author

22 November 2022

We developed a tactile sensor for robot hands that can measure normal force (FZ) and tangential forces (FX and FY) using photoelasticity. This tactile sensor has three photodiodes and three light-emitting diode (LED) white light sources. The sensor i...

(This article belongs to the Special Issue Polymers’ Role in Sensors: Resistant Solid Supports or Multi-Purpose Sensing Units?)
  • Article
  • Open Access
8 Citations
2,921 Views
14 Pages

Systematic Evaluation and Experimental Validation of Discrete Element Method Contact Models for Soil Tillage Simulation

  • Salavat Mudarisov,
  • Ildar Gabitov,
  • Yakov Lobachevsky,
  • Ildar Farkhutdinov and
  • Lyudmila Kravchenko

The discrete element method (DEM), based on particle dynamics, is used to simulate the technological process of soil tillage using agricultural machinery. A key aspect of the DEM for obtaining accurate agrotechnical and energy indicators of soil cult...

(This article belongs to the Section Agricultural Mechanization and Machinery)
  • Feature Paper
  • Article
  • Open Access
14 Citations
4,724 Views
12 Pages

Study of the Polishing Characteristics by Abrasive Flow Machining with a Rotating Device

  • Ken-Chuan Cheng,
  • A-Cheng Wang,
  • Kuan-Yu Chen and
  • Chien-Yao Huang

13 July 2022

Since only uni-direction motion is produced by traditional abrasive flow machining (AFM), so the polishing effects of the inner hole is not easy to achieve uniform roughness of the whole surface after polishing. Therefore, in this study, a rotating d...

(This article belongs to the Special Issue New Frontiers in Magnetic Polishing and Electrochemical Technology)
  • Article
  • Open Access
1,283 Views
15 Pages

Mechanical Modeling of Grape Destemming in a Horizontal Centrifugal Destemmer

  • Piernicola Masella,
  • Agnese Spadi,
  • Ferdinando Corti,
  • Alessandro Parenti and
  • Giulia Angeloni

Destemming is a critical operation in winemaking, determining the proportion of stems, skins, and vegetal fragments that enter the must and influencing both the mechanical integrity of berries and the extraction kinetics during fermentation. Horizont...

  • Article
  • Open Access
12 Citations
5,832 Views
11 Pages

11 June 2019

This work presents the design of a modular ad-hoc fretting fatigue and fretting wear tribotester for thin steel wires. The working principles of the different modules are described, such as the displacement and contact modules. Preliminary studies fo...

(This article belongs to the Special Issue Recent Advances on Fretting Fatigue)
  • Article
  • Open Access
40 Citations
5,739 Views
16 Pages

15 March 2017

The micromechanical behavior at grain contacts subjected to tangential and normal forces is of major importance in geotechnical engineering research and practice. The development of the discrete element method (DEM) over the past three decades necess...

(This article belongs to the Special Issue Unconventional Natural Gas (UNG) Recoveries)
  • Article
  • Open Access
15 Citations
3,511 Views
19 Pages

Abrasive Waterjet (AWJ) Forces—Potential Indicators of Machining Quality

  • Libor M. Hlaváč,
  • Massimiliano P.G. Annoni,
  • Irena M. Hlaváčová,
  • Francesco Arleo and ,
  • Francesco Viganò and
  • Adam Štefek
  • + 1 author+ 0 author

15 June 2021

The necessity of monitoring the abrasive waterjet (AWJ) processes increases with the spreading of this tool into the machining processes. The forces produced on the workpiece during the abrasive waterjet machining can yield some valuable information....

(This article belongs to the Special Issue Advanced Technology of Material Processing: Abrasive Water Jet Machining)
  • Article
  • Open Access
20 Citations
4,689 Views
25 Pages

The quasi-static regime of friction between a rigid steel indenter and a soft elastomer with high adhesion is studied experimentally. An analysis of the formally calculated dependencies of a friction coefficient on an external load (normal force) sho...

(This article belongs to the Section Biomimetics of Materials and Structures)
  • Article
  • Open Access
26 Citations
9,722 Views
12 Pages

Adhesion Control Strategy Based on the Wheel-Rail Adhesion State Observation for High-Speed Trains

  • Xiaochun Fang,
  • Shuai Lin,
  • Zhongping Yang,
  • Fei Lin and ,
  • Hu Sun and
  • Liang Hu
  • + 1 author+ 0 author

In this paper, an adhesion control strategy based on the wheel-rail adhesion state observation is proposed for high-speed trains. First, the high-speed train single axle dynamics model is established. Then, a modified adhesion control method is propo...

  • Feature Paper
  • Article
  • Open Access
11 Citations
3,415 Views
11 Pages

A BTO/PVDF/PDMS Piezoelectric Tangential and Normal Force Sensor Inspired by a Wind Chime

  • Chunyan Zhang,
  • Xiaotian Zhang,
  • Qiang Zhang,
  • Shengbo Sang and ,
  • Jianlong Ji,
  • Runfang Hao and
  • Yan Liu
  • + 2 authors+ 0 author

27 September 2023

There is a growing demand for flexible pressure sensors in environmental monitoring and human–robot interaction robotics. A flexible and susceptible sensor can discriminate multidirectional pressure, thus effectively detecting signals of small...

(This article belongs to the Special Issue Flexible and Wearable Sensors, 2nd Edition)
  • Feature Paper
  • Review
  • Open Access
3 Citations
4,247 Views
15 Pages

In real life, sessile droplets usually have a three-dimensional shape, making it difficult to understand their forced wetting behavior, both from an experimental and a theoretical perspective. Even in the case of spreading under quasi-static conditio...

(This article belongs to the Special Issue B&D 2019)
  • Article
  • Open Access
12 Citations
5,827 Views
25 Pages

Design and Validation of a Device Attached to a Conventional Bicycle to Measure the Three-Dimensional Forces Applied to a Pedal

  • Ezequiel Martín-Sosa,
  • Víctor Chaves,
  • Ignacio Alvarado,
  • Juana Mayo and
  • Joaquín Ojeda

4 July 2021

Knowledge of the forces applied to the pedals during cycling is of great importance both from the point of view of improving sporting performance and medical analysis of injuries. The most common equipment for measuring pedal forces is usually limite...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
3 Citations
2,586 Views
19 Pages

22 October 2022

Cutting using an abrasive water jet is a complex process involving several physical phenomena. This research studies some of them, mostly the influence of selected variables on the measured forces and vibrations. The traverse speed represents one of...

(This article belongs to the Special Issue Advanced Technology of Material Processing: Abrasive Water Jet Machining)
  • Article
  • Open Access
4 Citations
3,189 Views
25 Pages

Prediction of Pre-Loading Relaxation of Bolt Structure of Complex Equipment under Tangential Cyclic Load

  • Xiaohan Lu,
  • Min Zhu,
  • Chao Li,
  • Shengnan Li and ,
  • Shengao Wang and
  • Ziwei Li
  • + 1 author+ 0 author

22 May 2024

Bolts have the advantages of simple installation and easy removal. They are widely applied in aerospace and high-speed railway traffic. However, the loosening of bolts under mixed loads can lead to nonlinear decreases in pre-loading. This affects the...

(This article belongs to the Special Issue Machine Health Monitoring and Fault Diagnosis Techniques  (Volume II))
  • Review
  • Open Access
15 Citations
6,917 Views
14 Pages

25 November 2022

The interaction of the T-cell receptor (TCR) with a peptide in the major histocompatibility complex (pMHC) plays a central role in the adaptive immunity of higher chordates. Due to the high specificity and sensitivity of this process, the immune syst...

(This article belongs to the Section Molecular Biology)
  • Article
  • Open Access
5 Citations
2,975 Views
14 Pages

29 April 2021

Contact breakage of particles makes a large difference in the strength of coarse-grained soils, and exploring the characteristics within the process of the breakage is of great significance. Ignoring the influence of particle shape, the micromechanis...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
2 Citations
1,787 Views
11 Pages

13 November 2024

We investigate the effect of three different harmonically varying loads as a function of the friction coefficient on energy loss in a three-dimensional discrete uncoupled frictional contact problem. Three loading cases include (1) a normal force is c...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
6 Citations
8,906 Views
14 Pages

6 January 2018

Piezoelectric motors use the inverse piezoelectric effect, where microscopically small periodical displacements are transferred to continuous or stepping rotary or linear movements through frictional coupling between a displacement generator (stator)...

  • Article
  • Open Access
7 Citations
4,668 Views
26 Pages

Dynamic Tangential Contact Stiffness and Damping Model of the Solid–Liquid Interface

  • Lixia Peng,
  • Zhiqiang Gao,
  • Zhaoyang Ban,
  • Feng Gao and
  • Weiping Fu

12 September 2022

In order to establish the tangential contact stiffness and damping model of the solid–liquid interface by tangential exciting vibration force under mixed lubrication, the finite difference method was firstly used to solve the average flow equat...

(This article belongs to the Section Friction and Tribology)
  • Article
  • Open Access
1 Citations
2,711 Views
17 Pages

Spherical Droplet Deposition—Mechanistic Model

  • Jacek A. Michalski and
  • Slawomir Jakiela

19 February 2021

In the currently existing physical models of wetting a solid substrate by a liquid drop, the contact angle is determined on the basis of the equilibrium of forces acting tangentially to the wetted surface at any point in the perimeter of the wetted a...

  • Article
  • Open Access
5 Citations
2,617 Views
19 Pages

28 July 2024

The FinRay soft gripper achieves passive enveloping grasping through its functional flexible structure, adapting to the contact configuration of the object to be grasped. However, variations in beam position and thickness lead to different behaviors,...

(This article belongs to the Special Issue Applications of Intelligent Robots: Sensing, Interaction, Navigation and Control Systems)
  • Article
  • Open Access
10 Citations
3,499 Views
12 Pages

21 October 2022

Metasurfaces formed by monopole and dipole resonators are studied theoretically. The monopole resonators are Helmholtz resonators or membranes vibrating on the first eigenfrequency; the dipole ones are spheres on springs or membranes vibrating on the...

(This article belongs to the Special Issue Resonators in Acoustics)
  • Article
  • Open Access
28 Citations
5,768 Views
24 Pages

Numerical Analysis of Effects of Arms with Different Cross-Sections on Straight-Bladed Vertical Axis Wind Turbine

  • Yutaka Hara,
  • Naoki Horita,
  • Shigeo Yoshida,
  • Hiromichi Akimoto and
  • Takahiro Sumi

1 June 2019

Most vertical axis wind turbines (VAWTs) need arms connecting the blades with the rotational axis. The arms increase the power loss of VAWTs; however, the distribution between the pressure and friction influences and their degrees of influence have n...

(This article belongs to the Special Issue Design, Fabrication and Performance of Wind Turbines 2019)
  • Article
  • Open Access
6 Citations
3,589 Views
22 Pages

8 August 2020

The resistance force generated when the locked-wheel acts on the soil is critical for deciding the traveling performance of push–pull locomotion. The resistance force depends on the tangential force of the sliding soil wedge beneath the wheel,...

(This article belongs to the Section Sensors and Robotics)
  • Article
  • Open Access
7 Citations
4,094 Views
16 Pages

Effects of Anisotropy on Single Crystal Silicon in Polishing Non-Continuous Surface

  • Guilian Wang,
  • Zhijian Feng,
  • Yahui Hu,
  • Jie Liu and
  • Qingchun Zheng

30 July 2020

A molecular dynamics model of the diamond abrasive polishing the single crystal silicon is established. Crystal surfaces of the single crystal silicon in the Y-direction are (010), (011), and (111) surfaces, respectively. The effects of crystallograp...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
9 Citations
5,173 Views
14 Pages

Milling Tool Wear Monitoring via the Multichannel Cutting Force Coefficients

  • Qingqing Xing,
  • Xiaoping Zhang,
  • Shuang Wang,
  • Xichen Yu and ,
  • Qingsheng Liu and
  • Tongshun Liu
  • + 1 author+ 0 author

10 April 2024

Tool wear monitoring (TWM) is of great importance for improving the machining quality and the efficiency of the milling process. Extracting a discriminative tool wear feature is the key to TWM. Cutting force coefficients, which reflect the tool&ndash...

(This article belongs to the Section Advanced Manufacturing)
  • Article
  • Open Access
83 Citations
11,519 Views
18 Pages

Carbon Black/PDMS Based Flexible Capacitive Tactile Sensor for Multi-Directional Force Sensing

  • Yinlong Zhu,
  • Xin Chen,
  • Kaimei Chu,
  • Xu Wang and ,
  • Zhiqiang Hu and
  • Haijun Su
  • + 1 author+ 0 author

14 January 2022

Flexible sensing tends to be widely exploited in the process of human–computer interactions of intelligent robots for its contact compliance and environmental adaptability. A novel flexible capacitive tactile sensor was proposed for multi-direc...

(This article belongs to the Section Sensor Materials)
  • Article
  • Open Access
12 Citations
2,482 Views
16 Pages

10 November 2022

In high production gas wells, premium connections are subject to alternating loads and vibration excitation due to the change of fluid pressure exerted on the tubing string. The energy dissipation on the sealing surface of premium connections affects...

(This article belongs to the Special Issue Challenges and Research Trends of Unconventional Oil and Gas)
  • Article
  • Open Access
1,111 Views
19 Pages

Finite Element Simulation and Experiment for Electromagnetic Flanging Forming of Aluminum Alloy Sheet

  • Zhengrong Zhang,
  • Jingchao Yao,
  • Fei Wu,
  • Jun Zhang and ,
  • Chaojun Chen and
  • Chun Huang
  • + 1 author+ 0 author

17 September 2025

In order to address the problem of the large gap in the film on the straight edge of the electromagnetic flanging forming by the flat coil affecting the quality of the flanging part, a multi-layer variable-turn stepped coil is proposed. Numerical sim...

(This article belongs to the Section Materials Simulation and Design)
  • Technical Note
  • Open Access
9 Citations
5,851 Views
19 Pages

6 February 2020

The shield tunneling method is widely used, especially in urban areas, since it is efficient for minimizing disturbances to surroundings. Although segmental lining is commonly used in this method, in both the research and practice of tunnel lining de...

(This article belongs to the Special Issue Short-Term Forecasting in Civil Engineering with Multidisciplinary Approaches: Combined Numerical, Experimental and Statistical Methods)
  • Article
  • Open Access
9 Citations
4,499 Views
17 Pages

The tangential adhesive contact (friction) between a rigid steel indenter and a soft elastomer at shallow indentation depths, where the contact exists mainly due to adhesion, is investigated experimentally. The dependencies of friction force, contact...

(This article belongs to the Special Issue Tribology in Germany: Latest Research and Development)
  • Article
  • Open Access
1 Citations
1,321 Views
18 Pages

4 August 2025

The existence of fault zones in high-intensity earthquake areas has a serious impact on engineering structures, and the longitudinal response of tunnels crossing faults needs further in-depth research. To analyze the tangential contact effect between...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
15 Citations
4,015 Views
23 Pages

Liquid–Solid Flow Characteristics in Vertical Swirling Hydraulic Transportation with Tangential Jet Inlet

  • Jiyang Qi,
  • Jie Yin,
  • Fei Yan,
  • Ping Liu and ,
  • Tieli Wang and
  • Chen Chen
  • + 1 author+ 0 author

7 October 2021

In order to improve the efficiency and safety of vertical hydraulic transport systems for non-spherical particles, a new pipeline transport system with a tangential jet inlet is adopted in this study, and a modified non-spherical drag coefficient mod...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
8 Citations
4,193 Views
15 Pages

10 December 2019

The purpose of this work is to construct a tribo-fatigue damage map of high-speed railway wheel material under different tangential forces and contact pressure conditions through JD-1 testing equipment. The results indicate that the wear rate of the...

  • Article
  • Open Access
6 Citations
2,638 Views
17 Pages

6 December 2022

Trochoid milling can improve the quality of machining of difficult materials as well as the efficiency of machining. However, its complex tool trajectory makes it difficult to predict the instantaneous cutting forces during cutting. Therefore, in thi...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
2 Citations
2,258 Views
16 Pages

4 January 2024

The article is devoted to the analytical and numerical study of the pattern of propagation and attenuation, due to Coulomb friction, of shear waves in an infinite elastic thin plate with a circular orifice of radius r0 lying on a rough base. Consider...

  • Article
  • Open Access
4 Citations
3,007 Views
25 Pages

In reported experiments, a steel indenter was pressed into a soft elastomer layer under varying inclination angles and subsequently was detached under various inclination angles too. The processes of indentation and detachment were recorded with a vi...

(This article belongs to the Special Issue Biological Attachment Systems and Biomimetics)
  • Article
  • Open Access
16 Citations
3,628 Views
13 Pages

Simulation Analysis of Cluster Effect of High-Shear Low-Pressure Grinding with Flexible Abrasive Tools

  • Chengjin Tian,
  • Jinguo Han,
  • Yebing Tian,
  • Bing Liu and ,
  • Zhiqiang Gu and
  • Xintao Hu
  • + 1 author+ 0 author

15 July 2021

Based on the clustering effect of shear-thickening fluids (STFs), a high-shear low-pressure flexible grinding wheel has been developed. In order to explore the material removal mechanism, the coupled Eulerian—Lagrangian (CEL) method is adopted to sim...

(This article belongs to the Special Issue Frontiers in Ultra-Precision Machining)
  • Article
  • Open Access
3 Citations
4,116 Views
13 Pages

Comparison of Dual-Permanent-Magnet-Excited Machines and Surface-Mounted Permanent Magnet Machines in Terms of Force

  • Minh-Trung Duong,
  • Do-Hyun Kang,
  • Yon-Do Chun,
  • Byung-Chul Woo and ,
  • Yoon-Sun Lee and
  • Hwang Wook
  • + 1 author+ 0 author

10 January 2019

In this paper, finite element analysis demonstrates the difference between dual-permanent-magnet-excited machines (DPMM) and surface-mounted permanent magnet machines (SPM) in terms of tangential force at the same air gap, diameter, stacking length,...

(This article belongs to the Special Issue Electrical Machine Design)
  • Article
  • Open Access
9 Citations
3,547 Views
12 Pages

20 February 2020

In this paper, a revolving cycloid milling cutter was designed with a larger effective cutting helix angle and rake angle than a ball end milling cutter of the same diameter. This new type of milling cutter can solve the problems of low machining eff...

of 9