- Article
The paper investigates and addresses the “dead time” of a synchronous step-down converter implemented with P-channel and N-channel transistors. The transistors are controlled by a single driver, and “dead time” is implemented...
The paper investigates and addresses the “dead time” of a synchronous step-down converter implemented with P-channel and N-channel transistors. The transistors are controlled by a single driver, and “dead time” is implemented...
The execution time that takes to perform numerical simulation of a chaotic oscillator mainly depends on the time-step h. This paper shows that the optimization of chaotic oscillators can be enhanced by estimating the highest h in either one-step or m...
As the natural gas pipeline network becomes larger and more complicated, a stricter requirement of computation efficiency for the large and complicated network transient simulation should be proposed. The adaptive time step method has been widely use...
Generative linguistic steganography encodes candidate words with conditional probability when generating text by language model, and then, it selects the corresponding candidate words to output according to the confidential message to be embedded, th...
The cellular automata (CA) model has been a meaningful way to study pedestrian evacuation during emergencies, such as fires, for many years. Although the time step used in the CA model is one of the most essential elements, there is a lack of researc...
Aiming at the limitations of a single High Resolution Range Profile (HRRP) in recognition, this paper proposes a Time step Correlation-based Feature Fusion (TCFF) method. This method calculates the covariance matrix at the time step of the two featur...
High-frequency monitoring of agrometeorological parameters is quintessential in the domain of Precision Agriculture (PA), where timeliness of collected observations and the ability to generate ahead-of-time predictions can substantially impact the cr...
Circuit simulation has become increasingly significant in circuit design with the development of very large scale integration, and direct current (DC) analysis, which serves as the basis of circuit behavior analysis, is the foundation for nonlinear e...
In order to study the influence of an integration time step on dynamic calculation of a vehicle-track-bridge under high-speed railway, a vehicle-track-bridge (VTB) coupled model is established. The influence of the integration time step on calculatio...
This study investigates user behavior at a bottleneck under two queuing pricing schemes: the optimal time-varying toll and the optimal multi-step toll. A mathematical model is developed to classify users based on toll status and arrival timing, furth...
A 6-bit 20 GS/s 16-channel time-interleaved (TI) analog-to-digital converter (ADC) using a two-step flash ADC with a sample-and-hold (S/H) sharing technique and a gain-boosted voltage-to-time converter (VTC) is presented for high-speed wireline commu...
Distributed energy resources (DERs) offer a promising solution for enhancing the resilience and efficiency of modern power systems. However, the inherent time delays in their communication and control systems can degrade their small signal stability,...
Computer-based fully-automated cell tracking is becoming increasingly important in cell biology, since it provides unrivalled capacity and efficiency for the analysis of large datasets. However, automatic cell tracking’s lack of superior patter...
The numerical modeling of actual river floods faces three challenges related to computational efficiency, accuracy, and proper balancing of terms in the governing equations, all of which are discussed in this paper. Herein, a large time step (LTS) sc...
This study aimed to develop and evaluate a new step-count algorithm, StepMatchDTWBA, for the accurate measurement of physical activity using wearable devices in both healthy and pathological populations. We conducted a study with 30 healthy volunteer...
We propose an accurate data-driven numerical scheme to solve stochastic differential equations (SDEs), by taking large time steps. The SDE discretization is built up by means of the polynomial chaos expansion method, on the basis of accurately determ...
In this work, the real-time mathematical models of electromechanical power systems with semiconductor converters based on the author’s method of the average voltages in the integration step are described. As well as the theoretical basics of th...
In industries dealing with motor drive systems, the use of real-time simulators for validating control codes is becoming increasingly mandatory. This is particularly essential for systems with advanced control codes or complex microcontroller unit (M...
Accurate reservoir inflow forecasting is vital for effective water resource management. Reliable forecasts enable operators to optimize storage and release strategies to meet competing sectoral demands—such as water supply, irrigation, and hydr...
To achieve rapid detection of stainless steel passivation quality, a time-domain impedance method was investigated based on a potential step transient with a portable three-electrode probe. A comparison of the effects of signal analysis and transient...
This paper aims to maximize the performance of photovoltaic generators under varying atmospheric conditions by employing an improved variable-step current perturbation Perturb and Observe (IVSCP-PO) MPPT controller. The proposed approach overcomes th...
The joint demand for power and freshwater is continuously increasing due to population growth, the rise of economic activity, and climate change. Integrated concentrating solar thermal power and desalination (CSP+D) plants may provide a key solution...
When the concentration of a gas exceeds the equilibrium concentration in a liquid, the gas–liquid system is referred as a supersaturated system. The supersaturation can be achieved by either changing the pressure and/or temperature of the syste...
A new reactor core multi-physics system addresses the pellet-to-cladding heat transfer modeling to improve full-core operational transient and accident simulation used for assessment of reactor core nuclear safety. The rigorous modeling of the heat t...
The aim of the study was to determine the effect of step load in hypoxia on the effectiveness of preoperative rehabilitation (PR) and hormone levels based on a case study. Introduction: We assessed the impact of variables such as rate of movement and...
Discrete element models of glass beads are routinely run with particles two to three orders of magnitude softer than real glass, and softened models usually show lower shear strength, attributed to the added contact compliance. Softening, however, al...
Osteoarthritis (OA) of the hip is a degenerative joint disease, which means it causes gradual damage to the joint, and its incidence rate continues to increase worldwide. Degenerative osteoarthritis can cause significant pain and gait disturbance in...
Event-Related Potentials (ERPs) are low-amplitude neural responses elicited by sensory or cognitive stimuli, widely exploited as biomarkers in the early diagnosis of neurodevelopmental and neurodegenerative disorders such as autism spectrum disorder...
Time-resolved step-scan FTIR spectroscopy has been employed to probe the dynamics of the ba3 oxidoreductase from Thermus thermophilus in the ns-μs time range and in the pH/pD 6–9 range. The data revealed a pH/pD sensitivity of the D372 residue and of...
The large time step (LTS) explicit scheme relaxes the Courant–Friedrichs–Lewy (CFL) restriction by propagating waves across multiple cells per time step and has shown clear efficiency gains for the homogeneous shallow water equations. Ear...
An extreme step-down ratio buck converter is proposed using a double step-down (DSD) buck converter architecture and a single time-based current mode PWM controller able to generate two non-overlapping control signal phases. Current sampling for two...
This study introduces a real-time optimization framework for eco-driving of heavy-duty vehicles over long-distance routes. A longitudinal dynamic model incorporating powertrain performance and fuel consumption is formulated, and the eco-driving scena...
Fused deposition modeling (FDM) is a material-extrusion additive manufacturing technology that is widely used in rapid prototyping, complex product modeling, and functional part fabrication. However, process-parameter drift and environmental disturba...
The aim of this study was to determine the effect of a step load periodisation protocol for the rehabilitation of the anterior cruciate ligament (ACL) based on the variables of both the tempo of movement and time under tension (TUT) in normobaric hyp...
(1) Background: HEV is a zoonotic, foodborne pathogen. It is spread worldwide and represents a public health risk. The aim of this study was to evaluate the presence of HEV RNA in farrow-to-finish pig farms in different regions of Bulgaria; (2) Metho...
The choice of the computational time step (dt) value and the method for setting dt can have a bearing on the accuracy and performance of a simulation, and this effect has not been comprehensively researched across different simulation conditions. In...
In this paper, a new, high step-up quadratic boost converter with high conversion efficiency is discussed. A storage capacitor and resonant inductor are connected in series with a clamp capacitor through a diode. These compose a voltage multiplier ce...
A modified power-law (MPL) viscosity model of non-Newtonian fluid flow has been used for the multiple-relaxation-time (MRT) lattice Boltzmann methods (LBM) and then validated with the benchmark problems using the graphics process unit (GPU) parallel...
A novel multi-step heat treatment process was performed for 0.2C–5Mn steel, and the effect of intercritical annealing (IA) durations on the microstructure evolution and mechanical properties was studied. The results showed that the content of p...
Pumping station structures are widely employed to supply circulating cooling water systems in nuclear power plants (NPPs) throughout China. Investigating their seismic performance under complex heterogeneous site conditions and load scenarios is para...
Bitcoin bubbles exhibit locally explosive dynamics, but identifying past episodes does not establish their predictability. We combine the generalized supremum augmented Dickey–Fuller test with nine probabilistic learners and three probability-o...
This article presents an efficient and accurate adaptive time-stepping finite difference method (FDM) for solving the Landau–Lifshitz (LL) equation, which is an important mathematical model in understanding magnetic materials and processes. Our...
A compensatory stepping strategy following repeated perturbations may compromise dynamic balance and postural stability. However, there is a lack of study on preferred limb reaction, swing, and step time adjustments. The purpose of this study was to...
The novel variant IBDV (nVarIBDV, especially genotype A2dB1) mainly affects broilers in China. It causes an infection characterized by the atrophy of the bursa, a decrease in the level of lymphocytes, proliferation of fibrous tissue around the follic...
Hydrological models are generally calibrated at longer time-steps (monthly, seasonal, or annual) than their computational time-step (daily), because of better calibration performance, lower computational requirements, and the lack of reliable tempora...
With ever increasing demand for electricity and the huge potential of renewable energy, an increasing number of renewable-energy sources are being used to generate electricity. However, due to the intermittency of renewable-energy generation, many re...
The rapid development of sixth-generation (6G) mobile broadband networks and Internet of Things (IoT) applications has led to significant increases in data transmission and processing, resulting in severe traffic congestion. To better allocate networ...
Color change is the most obvious characteristic of the tomato ripening stage and an important indicator of the tomato ripening condition, which directly affects the commodity value of tomato. To visualize the color change of tomato fruit during the m...
This study proposes an adaptive local time stepping (LTS) method based on a two-dimensional shallow water model for simulating multi-scale storm surge inundation in coastal regions. By dynamically monitoring the variation in the proportion of dry/wet...
In this paper, in order to improve the calculation accuracy and efficiency of α-order Caputo fractional derivative (0 < α ≤ 1), we developed a compact scheme combining the fast time stepping method for solving 2D fractional nonlinea...
of 422