Circuit and Signal Processing
A section of Electronics (ISSN 2079-9292).
Section Information
The alliance of computers and telecommunications, defining the high-tech revolution of our time, is characterized by the convergence of the basic concepts of digital, analog, and mixed circuits (and systems), which enable the present devices to perform their intended function having major direct and indirect impacts on our lives. In this age of digital electronics, the importance of analog circuitry and signal processing concepts is essential for the progress of the field and for new developments.
The aim of the Circuits and Signal Processing Section is to host significant and original contributions and state-of-the-art review articles in this field of research. The scope of this Section is broad, ranging from mathematical foundations to practical engineering applications, measurement techniques, compliance verification, and reliability studies.
Subject Areas
Topics of interest include but are not limited to:
- Circuits and systems for the Internet of Things (IoT);
- Circuits and systems for 5G networks;
- Circuits and systems of Radio Frequency (RF) applications;
- Analog, digital, and mixed signal processing building blocks;
- Non-linear circuits and systems;
- Amplifiers, Filters, Oscillators;
- Circuits and systems for biomedical applications;
- Power and energy circuits and systems;
- Multimedia systems and signal processing;
- Artificial intelligence-based learning for circuits and systems with low power consumption;
- Artificial intelligence applications to typical integrated circuits (including Analog/Digital, RF, mmWave);
- Memristor-based architectures based on artificial intelligence/machine learning techniques;
- Memristor-based neuromorphic computing systems;
- Energy harvesting circuits for wearable and implantable devices;
- Architectures for neural network applications;
- Circuits for stochastic computing systems.
Editorial Board
Topical Advisory Panel
Special Issues
Following special issues within this section are currently open for submissions:
- Advanced RF/Microwave Circuits and System for New Applications (Deadline: 31 December 2025)
- New Trends in Design and Applications of Microwave and mm-Wave Circuits (Deadline: 31 December 2025)
- New Trends in CMOS: Devices, Technologies, and Applications (Deadline: 31 December 2025)
- RF/MM-Wave Circuits Design and Applications, 2nd Edition (Deadline: 15 January 2026)
- Advances in RF, Analog, and Mixed Signal Circuits, 2nd Edition (Deadline: 15 January 2026)
- GaN Technology’s Role in Next Generation Electronics Circuits and Power Applications (Deadline: 15 January 2026)
- Future Internet Circuits and Systems: Bridging Communication, Sensing and AI (Deadline: 15 January 2026)
- Low-Frequency Underwater Acoustic Signal Processing and Applications (Deadline: 15 January 2026)
- Intelligent Signal Processing and Its Applications (Deadline: 15 January 2026)
- Embedded Systems: Fundamentals, Design and Practical Applications, 2nd Edition (Deadline: 15 January 2026)
- Future Horizons in Analog and Mixed-Signal Systems: Devices, Circuits and Architectures (Deadline: 31 January 2026)
- Design of Low-Voltage and Low-Power Integrated Circuits, Volume 2 (Deadline: 15 February 2026)
- Advanced MEMS and Resonator Technologies: Design, Control, and Real-World Validation (Deadline: 15 February 2026)
- Quantum Computing and Quantum Dot Cellular Automata (QCA) Nanoelectronic Devices, Circuits, Systems and Their Applications (Deadline: 15 February 2026)
- Advances in Analog and RF Circuit Design (Deadline: 15 February 2026)
- Radio Frequency/Microwave Integrated Circuits and Design Automation (Deadline: 15 February 2026)
- Advances in Frontend Electronics for Millimeter-Wave Systems (Deadline: 15 February 2026)
- Advances in Hardware Security Research (Deadline: 15 March 2026)
- Advancement in Additive Manufacturing and Signal Interference Detection in Communication Network (Deadline: 15 March 2026)
- Recent Advances in Audio, Speech and Music Processing and Analysis, 2nd Edition (Deadline: 15 March 2026)
- AI-Enhanced Mixed-Signal Simulation and EDA for Integrated Circuit Design Using CMOS Technologies (Deadline: 15 March 2026)
- Embedded Systems and Microcontroller Smart Applications (Deadline: 15 March 2026)
- Circuit Design for Embedded Systems (Deadline: 31 March 2026)
- Recent Advances in High-Speed Electronics (Deadline: 31 March 2026)
- Automatic Optimization and Design of Integrated Circuits for High Performance and Low Power (Deadline: 15 April 2026)
- Advances in Array Signal Processing: Methods and Applications (Deadline: 15 April 2026)
- Design and Applications of Adaptive Filters (Deadline: 15 April 2026)
- New Trends for Power Optimizations in FPGA-Based Embedded Systems (Deadline: 15 April 2026)
- Advances in Acoustic, Speech, and Signal Processing and Recognition (Deadline: 15 April 2026)
- Microwave/Wireless Circuits & Systems (Deadline: 15 April 2026)
- Advances in Design and Applications of RF/MM-Wave Devices and Circuits (Deadline: 15 April 2026)
- Energy-Efficient Architectures and Memory Innovations for High-Performance Computing and Distributed Systems (Deadline: 15 April 2026)
- Integrated Circuits for Implantable Electronics and Medical Applications (Deadline: 20 April 2026)
- RF/Microwave Circuit Design and Its Application (Deadline: 30 April 2026)
- Advances in Digital Signal and Image Processing, Techniques, and Computations with Multidisciplinary Applications, 2nd Edition (Deadline: 15 May 2026)
- Digital Integrated Circuits and Systems (Deadline: 15 May 2026)
- Image Analysis Using LiDAR Data (Deadline: 15 May 2026)
- Analog/Mixed Signal Integrated Circuit Design (Deadline: 15 May 2026)
- Emerging Techniques and Applications for Analog and Mixed-Signal Integrated Circuits (Deadline: 15 May 2026)
- RF and Microwave Integrated Circuit Design (Deadline: 15 May 2026)
- System-on-Chip (SoC) and Field-Programmable Gate Array (FPGA) Design, 2nd Edition (Deadline: 15 May 2026)
- Design and Resilience of Digital Circuits for Emerging Computing Paradigms (Deadline: 15 May 2026)
- Advances in Design, Packaging and Verification of Low-Power Integrated Circuits (Deadline: 15 May 2026)
- RF/Microwave Integrated Circuits Design and Application (Deadline: 15 June 2026)
- Design and Application of Digital Circuit and Systems (Deadline: 15 June 2026)
- Application of Microwave and Millimeter Wave Circuits and Systems (Deadline: 15 June 2026)
- Emerging Computing Paradigms for Efficient Edge AI Acceleration (Deadline: 15 June 2026)
- Microwave Circuits and Microwave Engineering (Deadline: 15 June 2026)
- RF, Microwave, and Millimeter Wave Devices and Circuits and Their Applications, 2nd Edition (Deadline: 15 June 2026)
- Emerging Trends in Generative-AI Based Audio Processing (Deadline: 15 June 2026)
- New Advances of FPGAs in Signal Processing (Deadline: 15 June 2026)
- Advances in Low Power Circuit and System Design and Applications (Deadline: 15 July 2026)
- Mixed Design of Integrated Circuits and Systems (Deadline: 15 July 2026)
- Advances in RF and Mixed-Signal Circuits and Devices for ISAC-Enabled Sensing and Communication Systems (Deadline: 15 July 2026)
- From Circuits to Systems: Embedded and FPGA-Based Applications (Deadline: 15 July 2026)
- Low-Voltage Mixed-Signal CMOS Integrated Circuits for Emerging Applications (Deadline: 20 July 2026)
- New Insights Into Smart and Intelligent Sensors (Deadline: 15 August 2026)
Topical Collections
Following topical collections within this section are currently open for submissions:
