- Communication
Surface undulation was formed while growing InGaN/GaN multi-quantum wells on a semi-polar m-plane (1–100) sapphire substrate. Two distinct facets, parallel to
Surface undulation was formed while growing InGaN/GaN multi-quantum wells on a semi-polar m-plane (1–100) sapphire substrate. Two distinct facets, parallel to
Elevation static correction is an important step in seismic data processing used to eliminate distortions in events caused by surface fluctuations. There is a well-established processing sequence for active-source seismic data, with static correction...
The saponin escin, extracted from horse chestnut seeds, forms adsorption layers with high viscoelasticity and low gas permeability. Upon deformation, escin adsorption layers often feature surface wrinkles with characteristic wavelength. In previous s...
The three-dimensional magnetic vector structure (magnetization intensity and direction) of the planet can be effectively used to analyze the characteristics of its formation and operation. However, the quick acquisition of a large region of the magne...
In engineering practice, slope stability is commonly assessed using a two-dimensional (2D) analysis under the assumption of plane strain conditions. However, when dealing with the complex surface geometries of three-dimensional (3D) slopes, especiall...
Shallow-water depth information is essential for ship navigation and fishery farming. However, the accurate acquisition of shallow-water depth has been a challenge for marine mapping. Combining Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) ba...
We report on the crystal improvement of semi-polar (11
Small unmanned surface vehicles operating in confined, vegetation-rich, or ecologically sensitive waters require compact propulsion systems that minimize entanglement and unintended contact. Here, we present a 178 mm biomimetic surface robot propelle...
The estimation of soil organic carbon (SOC) stock in terrestrial ecosystems of China is of particular importance because it exerts a major influence on worldwide terrestrial carbon (C) storage and global climate change. Map-based estimates of SOC sto...
The analysis of circulating tumor cells (CTCs) in the peripheral blood of cancer patients is critical in clinical research for further investigation of tumor progression and metastasis. In this study, we present a novel surface-enhanced Raman scatter...
Lipid bilayers are supramolecular structures responsible for a range of processes, such as transmembrane transport of ions and solutes, and sorting and replication of genetic materials, to name just a few. Some of these processes are transient and cu...
Surface gravity wave interaction with a semi-infinite floating elastic plate in the presence of multiple undulations has been studied under the assumption of linearized water wave theory and small amplitude structural response. The elastic plate is m...
The thickness of the Antarctic ice sheet is a crucial parameter for inferring glacier mass and its evolution process. In the literature, the gravity method has been proven to be one of the effective means for estimating ice sheet thickness. And it is...
In a recent study, we developed a minimally actuated robot that utilizes wave-like locomotion and analyzed its kinematics. In this paper, we present an analysis of the robot’s locomotion between two highly flexible surfaces. Initially, we creat...
At present, Rn subsurface flow can be described only by diffusion and advection transportation models within porous media that currently exist. Even though the temperature is a strong driving force in climate and gas thermodynamics, the impact of the...
This paper discusses the issue of low-angle estimation in multiple-input, multiple-output (MIMO) radar. Due to the low amount of data transmission, storage, and computation required for beamspace super-resolution algorithms in low-angle estimation, t...
The surface morphology of specimens significantly affects the measurement accuracy of indentation hardness. Surface undulation leads to dispersion in measured hardness and makes it very difficult to obtain an accurate hardness. In the past, mechanica...
Four types of undulated cylinders with streamwise undulation, transverse undulation, in-phase undulation and antiphase undulation are employed to investigate the undulation-axis effect on the structure of heat transfer around wavy cylinders. The flow...
To analyze the shear characteristics and mesoscopic failure mechanism of irregular serrated rock discontinuities, a great deal of interview samples of irregular serrated structures were made by 3D printing technology, and laboratory shear tests were...
Nucleation of protein crystals has been shown to be facilitated by substrates decorated with both nano- to micro-scale hierarchical undulations and spatially varying surface potential. In fact, on such surfaces, several proteins were found to crystal...
Fault waviness can control whether earthquakes arrest, cascade, or transition to supershear rupture, yet its interaction with hypocentral position and free-surface proximity remains poorly constrained. We use three-dimensional spontaneous dynamic-rup...
With the increasing scale and depth of underground engineering, the geological environment that engineering is faced with is becoming more complex. As the weak position of rock mass, the structural surface has a particularly great influence on the me...
This study provides the first component-level analysis of how axis orientation and phase combination influence the generation and redistribution of vorticity components in undulated cylinders. Large-eddy simulations are performed for streamwise (SU),...
The field emission current in a vacuum (
Seafloor undulations are common on continental shelves and slopes, but their origin is often difficult to determine because similar ridge-and-trough morphologies may originate from depositional processes, post-depositional deformation, or a combinati...
The mixed convection two-phase flow and heat transfer of nanofluids were addressed within a wavy wall enclosure containing a solid rotating cylinder. The annulus area between the cylinder and the enclosure was filled with water-alumina nanofluid. Buo...
The step structure on the (000
Three-dimensional images of fractured rocks can be acquired by an X-ray micro-CT scanning technique, which allows researchers to investigate the ‘true’ inner void structure of a natural fracture without destroying the core. The 3D fractur...
In the biomedical field, there is a demand for the development of novel approaches for the investigation of optical epithelial anatomical features with biomimetic materials. These materials are not only required to replicate structures but also enabl...
This paper investigates the scattering of oblique water waves by multiple thin barriers over undulation bottoms using the eigenfunction matching method (EMM). In the solution procedures of the EMM, the bottom topographies are sliced into shelves sepa...
The chain drive system, being one of the core subsystems of the scraper conveyor, greatly influences the coal-conveying efficiency due to its dynamic characteristics. Therefore, this paper employed an experimental method to compare the dynamic charac...
With the intensification of global warming, surface thermal environment issues have become increasingly prominent, particularly in the ecologically fragile Yellow River Basin (YRB). However, most studies neglect the synergistic effects of underlying...
This paper presents a direct 3D numerical simulation of biaxial surface wrinkling of thin metal film on a compliant substrate. The selected compliant substrate is a commercial Scotch tape on which a gold metal thin film has been transferred by using...
In this paper, we aim to evaluate the tribological, mechanical, and morphological performance of resin-based friction composites reinforced by sisal fibers with different shapes, namely helical, undulated, and straight shapes. The experimental result...
A protease of sperm in the newt Cynops pyrrhogaster that is released after the acrosome reaction (AR) is proposed to lyse the sheet structure on the outer surface of egg jelly and release sperm motility-initiating substance (SMIS). Here, we found tha...
Synthetic rock mass (SRM) models commonly represent fractures as planar surfaces, potentially oversimplifying the complex geometries observed in natural rock masses. This study investigates whether incorporating large-scale fracture undulations signi...
The detection of long-distance pavement elevation undulation is the main data basis for pavement slope detection and flatness detection, and is also the data source for 3D modeling and quality evaluation of pavement surfaces. The traditional detectio...
Extruded Al-Mg-Si profiles applied in the automotive industry are required to achieve an appropriate combination of strength and bendability. In order to investigate the effect of Mg/Si ratio on the bendability and anisotropic bending behavior, AA600...
The impact of deposition of multilayer CrN/CrCN coating on X6CrNiTi18-10 steel by means of the PVD (physical vapour deposition) method on resistance to cavitation erosion has been investigated. Cavitation tests were performed using a cavitation chamb...
A three-dimensional (3D) analytical framework was developed to quantify stress concentration factors (SCFs) on engineering surfaces with arbitrary slight undulations, effectively addressing the limitations of existing two-dimensional (2D) models by r...
The third-body particle-involved sliding contact between two rough rubbers with wavy surfaces is experimentally studied. The experiment is designed to isolate the direct contact between the first bodies so that friction resistance is induced complete...
This work shows improvements of geoid undulation values obtained from a high-resolution Global Geopotential Model (GGM), applied to local urban areas. The methodology employed made use of a Residual Terrain Model (RTM) to account for the topographic...
We developed an improved depth of extreme point (DEXP) method, characterized as an effective and rapid imaging method that can estimate the depth and distribution of a source quickly. Its main purpose is to solve various challenges. The automatic cal...
A crevasse is an important surface feature of a glacier. This study aims to detect crevasses from high-density airborne LiDAR point clouds. However, existing methods continue to suffer from the data holes within the crevasse region and the influence...
A surface modification of ultraflat gold nanotriangles (AuNTs) with different shaped nanoparticles is of special relevance for surface-enhanced Raman scattering (SERS) and the photo-catalytic activity of plasmonic substrates. Therefore, different app...
The purpose of the study was to propose a strategy to assess the potential reduction of the production cost during wire+arc additive manufacturing (WAAM) based on the combination of wire feed speed (related to deposition rate) and travel speed (relat...
Euler deconvolution is widely used to estimate the three-dimensional locations of geological sources from magnetic anomaly data. However, traditional Euler deconvolution is commonly performed on planar gridded data, whereas magnetic surveys in mounta...
The structure of turbulent flow over non-flat surfaces is a topic of major interest in practical applications in both engineering and geophysical settings. A lot of work has been done in the fully rough regime at high Reynolds numbers where the effec...
Wire arc additive manufacturing (WAAM) and laser-based powder bed fusion (L-PBF) are additive manufacturing (AM) processes that allow the manufacturing of complex part geometries. The manufacturing of AM parts does not result in high-quality function...
Mechanisms of coherent spontaneous cyclotron and undulator radiations of short dense bunches, in which electrons move along the same stationary helical trajectories, but have different dynamic properties, have been compared in detail. The results are...
of 5