The influence that parameters crookedness and taper have on the stack volume was analyzed by using a 3D-simulation model in this study. To do so, log length, diameters at the midpoint and both ends, crookedness, bark thickness, taper and ovality were...
The quantification of the solid wood content in a wood stack has been an object of investigation since the 18th century. Particularly, the log parameters exert a considerable influence on the volume of the stack, such as (1) the log midpoint diameter...
In this paper, a predictive combustion model is developed and implemented in GT-Power. The model consists of a detailed physically/chemically based ignition delay model, including a 1D spray model. The spray model results at the start of combustion a...
The microstructure of alkali-reactive aggregates, especially the spatial distribution of the pore and reactive silica phase, plays a significant role in the process of the alkali silica reaction (ASR) in concrete, as it determines not only the reacti...
Energy co-simulation can be used to analyze the dynamic energy consumption of a building or a region, which is essential for decision making in the planning and management of smart cities. To increase the accessibility of energy simulation results, a...
A pilot study was conducted with 5th–8th semester students comparing a 3D-printed simulator and a virtual 3D simulation. This study’s aim was the comparison of these two resources in three different settings. Assessment of the resources&r...
To improve the comparability and operability of three-dimensional (3D) triangular foot models, this study proposes a resampling method for 3D triangular foot models based on cloth simulation. This method refers to a 3D triangular foot template and 3D...
Food 3D printing is a computer-aided additive manufacturing technology that can transform foods into intricate customized forms. In the past decade, this field has phenomenally advanced and one pressing need is the development of strategies to suppor...
With the rapid development of maritime intelligent systems and equipment, it has become increasingly urgent to effectively test the intelligence level and collaborative capabilities of these systems and devices. Currently, maritime intelligent system...
The linear mode avalanche photodiode (LM-APD) array has the capability of real-time 3D imaging for moving targets, which is a promising 3D imaging means in space. The main system parameters of the LM-APD array 3D imaging system, the characteristics o...
The problem of thermal modeling of modern three-dimensional (3D) integrated circuit (IC) systems in packages (SiPs) is discussed. An effective quasi-3D (Q3D) approach of thermal design is proposed taking into account the specific character of 3D IC s...
In top-coal caving, the window control of hydraulic support is a key issue to the perfect economic benefit. The window is driven by the electro-hydraulic control system whose command is produced by the control model and the corresponding algorithm. H...
Crack growth in structures depends on the cyclic loads applied on it, such as mechanical, thermal and contact, as well as residual stresses, etc. To provide an accurate simulation of crack growth in structures, it is of high importance to integrate a...
A precise volumetric assessment of maxillary alveolar defects in patients with cleft lip and palate can reduce donor site morbidity or allow accurate preparation of bone substitutes in future applications. However, there is a lack of agreement regard...
Recent advances in sensor and platform technologies, such as satellite systems, unmanned aerial vehicles (UAV), manned aerial platforms, and ground-based sensor networks have resulted in massive volumes of data being produced and collected about the...
Three-dimensional concrete printing is a technique that has been growing constantly, presenting advantages such as reduced completion times and a decreased environmental impact by eliminating the use of formworks. To carry out the process, the printi...
A data-driven 3D simulation for the robotic automation of the most labor-intensive packaging process in meal kit production was developed using Tecnomatix plant simulation software. The workflow and environments of the existing manual process were an...
Background: The advance in imaging techniques is useful for 3D models and printing leading to a real revolution in many surgical specialties, in particular, neurosurgery. Methods: We report on a clinical study on the use of 3D printed models to perfo...
Lung cancer is the leading cause of cancer-related deaths. Many methods and devices help acquire more accurate clinical and localization information during lung interventions and may impact the death rate for lung cancer. However, there is a learning...
Radiofrequency ablation (RFA) is a treatment used in the management of various arrhythmias including atrial fibrillation. Enhanced training for electrophysiologists through the use of physical simulators has a significant role in improving patient ou...
In order to meet the requirements of high performance, miniaturization, low cost, low power consumption and multi-function, three-dimensional (3D) integrated technology has gradually become a core technology. With the development of 3D integrated tec...
In order to simulate a circuit by applying various logic circuits and full chip using the HSPICE model, which can consider electrical coupling proposed in the previous research, it is investigated whether additional electrical coupling other than ele...
Numerical simulation of laser drilling is rapidly gaining interest in academia and industry since this process remains one of the most important and widely-used technologies in modern manufacturing. Meshfree methods such as Smoothed Particle Hydrodyn...
To address the challenge of imprecise micro-droplet formation control in piezoelectric jetting devices used in sand mold 3D printing and apply on-demand inkjet printing technology to sand mold manufacturing, this study first explains the working prin...
A 3D icing simulation code is developed in the open-source CFD toolbox OpenFOAM. A hybrid Cartesian/body-fitted meshing method is used to generate high-quality meshes around complex ice shapes. Steady-state 3D Reynolds-averaged Navier-Stokes (RANS) e...
The junctionless field-effect transistor (JLFET) compact model using the model parameters extracted from the LETI-UTSOI (version 2.1) model was proposed to perform circuit simulation considering the electrical coupling between the stacked JLFETs of a...
Dopamine D3 receptor (D3R) is a key receptor for regulating motor, cognitive, and other functions. In this study, 50 2-phenylcyclopropylmethylamine (PCPMA) derivatives with good selectivity for D3R were investigated using a three-dimensional quantita...
Dynamic visual simulation of flood risk is crucial for scientific and intelligent emergency management of flood disasters, in which data quality, availability, visualization, and interoperability are important. Here, a seamless integration of a spati...
This work illustrates the analysis of Film Bulk Acoustic Resonators (FBAR) using 3D Finite Element (FEM) simulations with the software OnScale in order to predict and improve resonator performance and quality before manufacturing. This kind of analys...
Experimental validation of computational simulations is important because it provides empirical evidence to verify the accuracy and reliability of the simulated results. This validation ensures that the simulation accurately represents real-world phe...
In recent years active façades have acquired greater importance given their capacity to improve the energy efficiency of buildings. One such type is the so-called Active Transparent Façade (ATF). A 3D numerical model based on computatio...
Large-scale particle-based fluid simulations present significant computational challenges, particularly in achieving interactive frame rates while maintaining visual quality. Unity3D’s widespread adoption in game development, VR/AR applications...
This paper thoroughly reviews the current state of digital simulation technology and its strategic implementation across applications, primarily focusing on advanced compression garments. Despite the significant impact of three-dimensional digital gar...
In spite of the importance of a detailed description of the filamentary current constriction of the IGBT during the turn-off operation that could lead to the device’s failure, there are to date no quantitative 3D simulation results of the filam...
The high-resolution 3D groundwater flow and transport simulation problem requires massive discrete linear systems to be solved, leading to significant computational time and memory requirements. The domain decomposition method is a promising techniqu...
The use of 3D-printed models in simulation-based training and planning for vascular surgery is gaining interest. This study aims to provide an overview of the current applications of 3D-printing technologies in vascular surgery. We performed a system...
LiDAR-based 3D object detection is critical for autonomous driving perception. Ensuring robust sensing under adverse weather is essential for safe deployment. Current physics-based simulation methods focus on atmospheric effects but offer limited gro...
The puncture of the gluteal artery (GA) is a rare and difficult procedure. Less experienced clinicians do not always have the opportunity to practice and prepare for it, which creates a need for novel training tools. We aimed to investigate the feasi...
This study presents the design and comprehensive 3D multiphysics simulation of a novel microfluidic immunosensor for non-invasive, real-time detection of pro-inflammatory biomarkers in human sweat. The patch-like device integrates magnetofluidic mani...
The double wishbone suspension (DWS) system is widely used in automotive engineering because of its favorable kinematic properties, which affect vehicle dynamics, handling, and ride comfort; hence, it is important to have an accurate 3D model, simula...
31 October 2026
In current pre-clinical endodontic education, extracted human teeth are the primary resource for students, and Commission on Dental Accreditation (CODA) has no requirements mandating usage of electronic apex locators (EALs). The introduction of digit...
As field effect transistors are reduced to nanometer dimensions, experimental and theoretical research has shown a gradual change in noise generation mechanisms. There are few studies on noise theory for small nanoscale transistors, and Monte Carlo (...
Spatiotemporal changes in waterborne disease risk were evaluated for the Chhnok Tru floating village in the Tonle Sap Lake by combining a hydraulic simulation and quantitative microbial risk assessment (QMRA). First, a three-dimensional (3D) hydrauli...
Two-dimensional concentric asymmetric microelectrodes play a crucial role in developing sensitive and specific biological assays using fluid micromixing generated by alternating current electrohydrodynamics (ac-EHD). This paper reports the design, si...
To address the limitations of traditional trench electrode silicon detectors, such as charge collection dead zones and non-uniform electric fields, this paper proposes a novel 3D silicon detector based on an interleaved trench electrode structure. By...
This paper is part of an ongoing research study on developing a methodology for the low-cost creation of the Digital Twin of an urban neighborhood for sustainable, transparent, and participatory urban management to enable low-and middle-income econom...
Stereolithography (SLA) is a 3D printing technology that uses a laser to cure liquid resin from a tank, layer by layer, to create highly detailed and precise objects. However, this 3D printing technique requires a large amount of resin material to be...
Pumped-storage power plants play a vital role in power systems by providing peak load regulation, frequency control, and phase modulation services. The safety and stability of these plants critically depend on understanding transient processes during...
Objectives: This study aims to develop and validate a standardized methodology for creating high-fidelity, custom-made, patient-specific 3D-printed vascular models that serve as tools for preoperative planning and training in the endovascular treatme...
3D digital-image correlation (3D-DIC) is a non-contact optical technique for full-field shape, displacement, and deformation measurement. Given the high experimental hardware costs associated with 3D-DIC, the development of high-fidelity 3D-DIC simul...
of 480