Skip to Content

167 Results Found

  • Article
  • Open Access
37 Citations
7,720 Views
15 Pages

26 July 2021

Video deflectometer based on using off-axis digital image correlation (DIC) has emerged as a robust non-contact optical tool for deflection measurements of bridges. In practice, a video deflectometer often needs to measure the deflections at multiple...

(This article belongs to the Collection Vision Sensors and Systems in Structural Health Monitoring)
  • Article
  • Open Access
2,378 Views
19 Pages

14 January 2024

Most cable arch bridge damage accidents are caused by bridge collapse due to fracture of the short sling of the arch bridge. The service life of the short sling is much lower than the design life, mainly resulting from the action of vehicles and temp...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
4 Citations
3,068 Views
22 Pages

16 January 2021

A new type of composite voided slab, the TUBEDECK (TD), which utilizes the structural function of profiled steel decks, has recently been proposed. Previous studies have confirmed that the flexural strength of TD slabs can be calculated based on the...

(This article belongs to the Special Issue Novel High-Performance Building Materials and Structures)
  • Article
  • Open Access
12 Citations
3,262 Views
13 Pages

20 June 2022

In order to obtain better quality TA10 pipes, the Boring and Trepanning Association (BTA) deep-hole drilling process is used. However, this type of machining leads to difficult chip removal, tool wear, and poor hole-surface quality. In this study, a...

(This article belongs to the Special Issue Advances in the Machined Surface Integrity in Manufacturing Process of Materials)
  • Article
  • Open Access
1,700 Views
13 Pages

This study proposes a novel structural deflection measurement method using a single smartphone with an innovative scale factor (SF) calibration technique, eliminating reliance on laser rangefinders and industrial cameras. Conventional off-axis digita...

  • Article
  • Open Access
23 Citations
6,362 Views
20 Pages

This study covers the structural optimization of vertical axis wind turbines (VAWTs) that can operate reliably for long periods of time in marine environments, as well as simulation analysis to evaluate their fatigue and strain resistance. Due to the...

(This article belongs to the Section Coastal Engineering)
  • Article
  • Open Access
15 Citations
5,791 Views
16 Pages

Electrostatic MEMS Two-Dimensional Scanning Micromirrors Integrated with Piezoresistive Sensors

  • Yameng Shan,
  • Lei Qian,
  • Kaixuan He,
  • Bo Chen and ,
  • Kewei Wang,
  • Wenchao Li and
  • Wenjiang Shen
  • + 2 authors+ 0 author

26 November 2024

The MEMS scanning micromirror requires angle sensors to provide real-time angle feedback during operation, ensuring a stable and accurate deflection of the micromirror. This paper proposes a method for integrating piezoresistive sensors on the torsio...

(This article belongs to the Special Issue Micro/Nanostructures in Sensors and Actuators, 2nd Edition)
  • Article
  • Open Access
1 Citations
1,127 Views
17 Pages

21 May 2025

The aim of this study was to determine the influence of initial chain tension, feed force, and wood hardness on the variability of the cutter’s deflection angle during petrol chainsaw operation. Cutting wood with a chainsaw is a complex process...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
328 Views
24 Pages

26 September 2026

To reconcile high- and low-speed aerodynamic adaptation with tailless stability and control, a wing–rudder integrated tailless configuration is proposed. Morphing wing–rudders mounted at the wingtips of a cranked double-swept waverider de...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
152 Views
24 Pages

2 November 2026

Geometric and laminate modifications can increase bending-induced twists in wind turbine blade spars, but the associated changes in deformation, stress, mass, and vibration are not always assessed on a consistent basis. This study therefore compares...

  • Article
  • Open Access
23 Citations
8,829 Views
17 Pages

21 September 2016

This paper describes a small range six-axis accelerometer (the measurement range of the sensor is ±g) with high sensitivity DCB (Double Cantilever Beam) elastic element. This sensor is developed based on a parallel mechanism because of the reliabilit...

(This article belongs to the Section Physical Sensors)
  • Feature Paper
  • Article
  • Open Access
3 Citations
4,708 Views
14 Pages

Hybrid Actuation MEMS Micromirror with Decoupled Piezoelectric Fast Axis and Electromagnetic Slow Axis for Crosstalk Suppression

  • Haoxiang Li,
  • Jiapeng Hou,
  • Zheng Gong,
  • Huijun Yu and ,
  • Yue Liu and
  • Wenjiang Shen
  • + 1 author+ 0 author

22 September 2025

Electromagnetic micro-electro-mechanical system (MEMS) micromirrors are widely used in optical scanning systems but often encounter mechanical crosstalk due to the use of shared drive coils. This phenomenon leads to parasitic motion along the slow ax...

(This article belongs to the Special Issue Piezoelectric MEMS/NEMS—Materials, Devices, and Applications, Third Edition)
  • Article
  • Open Access
2 Citations
2,181 Views
18 Pages

20 November 2023

The majority of current methods for measuring the angular deflection of a laser beam enable measurement only in one selected plane. However, there are tasks in which measurements of laser beam deflections in 3D are required. In this paper, we present...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
10 Citations
4,940 Views
43 Pages

26 April 2019

The article analyses the calculation of the deflection of reinforced concrete beams strengthened with fiber reinforced polymer. This paper specifically focuses on estimating deflection when the yielding of reinforcement is reached. The article propos...

(This article belongs to the Special Issue Fiber Reinforced Polymers for Structural Strengthening)
  • Article
  • Open Access
3 Citations
2,696 Views
24 Pages

The main objective of this research is to investigate the impact of the tendon profile layout on the shear strength of unbonded post-tensioned prestressed concrete bridge I-girders. This study involves an experimental investigation where ten unbonded...

(This article belongs to the Section Infrastructures and Structural Engineering)
  • Article
  • Open Access
1 Citations
620 Views
16 Pages

22 June 2026

Electrostatic MEMS micromirrors provide a compact and low-power beam-steering solution for miniaturized laser communication terminals. However, when they are used for quasi-static beam pointing rather than resonant scanning, the nonlinear voltage&nda...

(This article belongs to the Special Issue MEMS/NEMS Devices and Applications, 4th Edition)
  • Article
  • Open Access
29 Citations
5,370 Views
16 Pages

28 January 2021

Synthetic materials using epoxy resin and woven Kevlar fiber nanocomposites were fabricated in the presence of functionalized multiwalled carbon nanotubes (F-MWCNTs). Kevlar-reinforced epoxy nanocomposites were designed to manufacture a small blade o...

(This article belongs to the Special Issue Functional Polymer Composites: Design, Preparation and Applications)
  • Communication
  • Open Access
3 Citations
2,776 Views
10 Pages

16 February 2021

In this letter, we use a recent wormhole metric known as a ringhole [Gonzalez-Diaz, Phys. Rev. D 54, 6122, 1996] to determine the surface topology and the deflection angle of light in the weak limit approximation using the Gauss-Bonnet theorem (GBT)....

(This article belongs to the Special Issue Recent Advances in Wormhole Physics)
  • Article
  • Open Access
1 Citations
559 Views
26 Pages

Study on the Influence Factors of the Servo Steel Strut of Foundation Pit on Deflection Correction of Adjacent Shield Tunnel

  • Gang Wei,
  • Weihao Feng,
  • Zhe Wang,
  • Pengfei Wu and ,
  • Xuehua Wu,
  • Kuan Chang,
  • Donglai Jiang and
  • Yebo Zhou
  • + 3 authors+ 0 author

12 April 2026

The deep foundation pit excavation of subway will cause horizontal displacement, uneven settlement and other adverse effects on the adjacent shield. The use of servo steel strut has a certain effect on deflection correction, but the current understan...

(This article belongs to the Section F: Engineering and Materials)
  • Article
  • Open Access
2 Citations
1,414 Views
22 Pages

Parameter Optimization Design of Adaptive Flaps for Vertical Axis Wind Turbines

  • Zhenxu Ran,
  • Weipao Miao,
  • Yongqing Lai,
  • Yurun Pan and ,
  • Huahao Ou and
  • Ruize Zhang
  • + 1 author+ 0 author

14 August 2025

To enhance the aerodynamic performance of vertical axis wind turbines (VAWTs) under complex gust conditions, the design parameters of the flap were optimized using the computational fluid dynamics (CFD) method combined with orthogonal experimental de...

(This article belongs to the Special Issue Latest Challenges in Wind Turbine Maintenance, Operation, and Safety)
  • Article
  • Open Access
19 Citations
8,545 Views
14 Pages

25 July 2012

A novel three-point method using a grating eddy current absolute position sensor (GECS) for bridge deflection estimation is proposed in this paper. Real spatial positions of the measuring points along the span axis are directly used as relative refer...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
2 Citations
1,745 Views
18 Pages

5 August 2024

Wankel rotor engines are widely used in various fields due to their high power density and simple structure. This paper presents the optimisation of the Wankel rotor engine by simple modifications of the structure. We propose a radial spoiler arrange...

(This article belongs to the Section Chemical Processes and Systems)
  • Article
  • Open Access
7 Citations
3,906 Views
20 Pages

22 September 2023

The conventional methods used to analyze the shear lag effect in simply supported box girders assume that the neutral axis of the section coincides with the centroid, which does not strictly satisfy the axial equilibrium condition. To address this pr...

(This article belongs to the Section Building Structures)
  • Feature Paper
  • Article
  • Open Access
7 Citations
4,832 Views
19 Pages

22 December 2021

The cone crusher is the main equipment in the particle crushing process. The productivity of the cone crusher is determined by the motion characteristics of particles passing through the crushing chamber. In order to accurately describe the motion ch...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
3 Citations
3,161 Views
25 Pages

16 May 2024

A novel low-NOx burner was proposed in this study to achieve the stable and clean combustion of low- and medium-calorific-value gas and promote energy sustainability, and the influence of the gas pipe structure on the burner’s characteristics w...

(This article belongs to the Section Energy Sustainability)
  • Article
  • Open Access
3 Citations
2,936 Views
29 Pages

Effect of Atmospheric Stability on Meandering and Wake Characteristics in Wind Turbine Fluid Dynamics

  • Bendik Peter Løvøy Alvestad,
  • Leon Fevang-Gunn,
  • Balram Panjwani and
  • Tania Kalogiannidis Bracchi

8 September 2024

This study investigates the impact of atmospheric stability on wind turbine flow dynamics, focusing on wake deflection and meandering. Using the high-fidelity large-eddy simulation coupled with the Actuator Line model, we explore three stability cond...

(This article belongs to the Section Energy Science and Technology)
  • Article
  • Open Access
3,465 Views
12 Pages

15 November 2023

This study introduces an approach for modeling an arm of a Stewart platform to analyze the location of sections with a high deflection among the arms. Given the dynamic nature of the Stewart platform, its arms experience static and dynamic loads. The...

(This article belongs to the Special Issue Application of Finite Element Methods)
  • Proceeding Paper
  • Open Access
3 Citations
4,530 Views
6 Pages

In this study, we developed a new force plate system. Conventional force plates output force and moment by using the signals of three-axis load cells. The developed force plate installs four 5-axis load cells, and each load cell can output 3-axis for...

(This article belongs to the Proceedings of The 13th Conference of the International Sports Engineering Association)
  • Proceeding Paper
  • Open Access
2 Citations
2,582 Views
5 Pages

A Novel Gyroscopic Actuation Concept for 2D MEMS Micromirrors

  • Philip Kaupmann,
  • Stefan Pinter,
  • Jochen Franz,
  • Reinhard Streiter and
  • Thomas Otto

In this paper we present a novel approach to achieve indirect quasistatic deflection of 2D MEMS scanning micromirrors by solely resonant excitation utilizing gyroscopic effects. Therefore the micromirror is set to oscillate in its mirror plane additi...

(This article belongs to the Proceedings of Proceedings of Eurosensors 2017, Paris, France, 3–6 September 2017)
  • Article
  • Open Access
11 Citations
5,931 Views
10 Pages

2 March 2019

Friction stir welding is a preferred solid state welding process for Al/Fe joints, and in friction stir lap welding, the plunge depth is the most critical parameter for joint strength. We compared three plunge depth control methods, namely convention...

(This article belongs to the Special Issue Friction Stir Welding and Processing in Alloy Manufacturing)
  • Article
  • Open Access
867 Views
13 Pages

Modeling and Analysis of External Cavity Raman Lasers Generating Hermite–Gaussian Modes

  • Zirui Zeng,
  • Muye Li,
  • Yuxiang Sun,
  • Weibiao Chen and ,
  • Dijun Chen,
  • Xuezong Yang and
  • Yan Feng
  • + 2 authors+ 0 author

26 February 2026

An analytical model has been formulated to describe the generation of Hermite–Gaussian (HG) modes within Raman lasers through manipulation of the Stokes field’s optical axis deflection angle and its spatial offset relative to the pump fie...

(This article belongs to the Special Issue Advanced Photonic Technologies: From Light Sources and Nonlinear Optics to Sensing Applications)
  • Proceeding Paper
  • Open Access
3,845 Views
4 Pages

Experimental Validation of the Structural Integrity of Modular Horizontal Axis Wind Turbine Blades

  • Abhishek Asthana,
  • Sanjay Mukherjee,
  • Sara Mountney and
  • Ryan Griffiths

The production, transportation and repair of long horizontal axis wind turbine blades measuring up to 85 m require expensive specialist machinery that increases the capital cost of wind power generation. A modular blade design is a potential solution...

(This article belongs to the Proceedings of the Sustainable Places 2017 (SP2017) Conference)
  • Article
  • Open Access
25 Citations
4,075 Views
13 Pages

5 June 2020

Vision-based techniques are frequently used to compute the dynamic deflections of bridges but they are rather computationally complicated and require demanding instrumentation. In this article, we show that it is possible to reconstruct the 2-D kinem...

(This article belongs to the Section Remote Sensors)
  • Proceeding Paper
  • Open Access
8 Citations
3,716 Views
6 Pages

A Monolithic Three-Axis Accelerometer with Wafer-Level Package by CMOS MEMS Process

  • S. H. Tseng,
  • C. Y. Yeh,
  • A. Y. Chang,
  • Y. J. Wang and ,
  • P. C. Chen,
  • H. H. Tsai and
  • Y. Z. Juang
  • + 2 authors+ 0 author

This paper presents a monolithic three-axis accelerometer with wafer-level package by CMOS MEMS process. The compositions of the microstructure are selected from CMOS layers in order to suppress the in-plane and out-of-plane bending deflection caused...

(This article belongs to the Proceedings of Proceedings of Eurosensors 2017, Paris, France, 3–6 September 2017)
  • Article
  • Open Access
2 Citations
1,869 Views
10 Pages

Digital Holographic Interferometry for Micro-Deformation Analysis of Morpho Butterfly Wing

  • Ali Mardan Dezfouli,
  • Nazif Demoli,
  • Denis Abramović,
  • Mario Rakić and
  • Hrvoje Skenderović

9 September 2024

In this study, we present an analysis of deflections in a Morpho butterfly wing using digital holographic interferometry (DHI). Our methodology revolves around an off-axis lensless Fourier holographic setup, using laser excitation to induce deflectio...

(This article belongs to the Special Issue Holographic Information Processing)
  • Article
  • Open Access
6 Citations
4,182 Views
24 Pages

Experimental Study on the Movement of Boulders in Debris Flow: Influence of Boulder Size and Initial Orientation

  • Rendong Liu,
  • Fei Wang,
  • Jiading Wang,
  • Xiaoqing Chen and ,
  • Haijun Qiu and
  • Canyun Lou
  • + 1 author+ 0 author

29 December 2024

In debris-flow disasters, boulders moving at high velocities cause significant damage to houses and other facilities. Through a flume model test, this study explored the influences of the length/width ratio of the boulders, the angle between the long...

(This article belongs to the Special Issue The Latest Studies on Natural Hazards and Sustainable Civil Engineering)
  • Article
  • Open Access
3 Citations
1,580 Views
23 Pages

7 April 2025

For the full cross-sectional profile measurement of high-aspect-ratio micro-grooves, traditional measurement methods have blind measurement areas in the vertical sidewall and its intersection area with the bottom. This paper proposes a deflection-bas...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
17 Citations
4,784 Views
18 Pages

Hydrodynamic Ram Effect Caused by Debris Hypervelocity Impact on Satellite Tank

  • Beilei Zhao,
  • Jiguang Zhao,
  • Cunyan Cui and
  • Yongsheng Duan

9 October 2019

To study the hydrodynamic ram effect caused by the debris hypervelocity impact on the satellite tank, a numerical simulation of the spherical debris impacting the satellite tank at the velocity of 7000 m/s was carried out based on ANSYS/LS-DYNA softw...

  • Article
  • Open Access
23 Citations
7,148 Views
21 Pages

3 September 2014

A new method for dynamic measurement of deflections of the vertical (DOV) is proposed in this paper. The integration of an inertial navigation system (INS) and global navigation satellite system (GNSS) is constructed to measure the body’s attitude wi...

(This article belongs to the Special Issue Optical Gyroscopes and Navigation Systems)
  • Article
  • Open Access
2 Citations
917 Views
19 Pages

22 July 2025

Aiming at the problem of a full-width horizontal-axis roadheader being prone to diverge from the preset trajectory of the tunnel, a deviation correction control method based on particle swarm optimization–backpropagation (PSO-BP) neural network...

(This article belongs to the Section Actuators for Surface Vehicles)
  • Article
  • Open Access
8 Citations
6,544 Views
9 Pages

Generation of Color Images by Utilizing a Single Composite Diffractive Optical Element

  • Jiazhou Wang,
  • Liwei Liu,
  • Axiu Cao,
  • Hui Pang and ,
  • Chuntao Xu,
  • Quanquan Mu,
  • Jian Chen,
  • Lifang Shi and
  • Qiling Deng
  • + 4 authors+ 0 author

9 October 2018

This paper presents an approach that is capable of producing a color image using a single composite diffractive optical element (CDOE). In this approach, the imaging function of a DOE and the spectral deflection characteristics of a grating were comb...

(This article belongs to the Special Issue Product/Process Fingerprint in Micro Manufacturing)
  • Article
  • Open Access
35 Citations
8,945 Views
10 Pages

A Large-Size MEMS Scanning Mirror for Speckle Reduction Application

  • Fanya Li,
  • Peng Zhou,
  • Tingting Wang,
  • Jiahui He and ,
  • Huijun Yu and
  • Wenjiang Shen
  • + 1 author+ 0 author

Based on microelectronic mechanical system (MEMS) processing, a large-size 2-D scanning mirror (6.5 mm in diameter) driven by electromagnetic force was designed and implemented in this paper. We fabricated the micromirror with a silicon wafer and sel...

(This article belongs to the Special Issue MEMS Mirrors)
  • Article
  • Open Access
8 Citations
9,062 Views
20 Pages

Modeling and Control of a Two-Axis Stabilized Gimbal Based on Kane Method

  • Qixuan Huang,
  • Jiaxing Zhou,
  • Xiang Chen,
  • Youxin Yao and ,
  • Yuhao Chen,
  • Wei Chen,
  • Runjing Chen and
  • Zhisheng Lv
  • + 3 authors+ 0 author

3 June 2024

A two-axis stabilizing gimbal is a device that ensures a sensor is working properly on a moving platform. When classical mechanics (Newton–Euler and Lagrange) is employed to model a two-axis stable gimbal, its limitations can complicate the mod...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
6 Citations
3,352 Views
12 Pages

Polarization-Dependent Fiber Metasurface with Beam Collimating and Deflecting

  • Yuemin Ma,
  • Di Sang,
  • Yi Lin,
  • Qiang An and ,
  • Zhanshan Sun and
  • Yunqi Fu
  • + 1 author+ 0 author

Metasurfaces can arbitrarily manipulate the amplitude, phase, and polarization of optical fields on subwavelength scales. Due to their arbitrary manipulation and compact size, the metasurface can be well integrated with optical fibers. Herein, we dem...

(This article belongs to the Special Issue Fiber Optic Sensors: Science and Applications)
  • Article
  • Open Access
4 Citations
5,386 Views
13 Pages

Linear Actuators in a Haptic Feedback Joystick System for Electric Vehicles

  • Kamil Andrzej Daniel,
  • Paweł Kowol and
  • Grazia Lo Sciuto

6 February 2024

Several strategies for navigation in unfamiliar environments have been explored, notably leveraging advanced sensors and control algorithms for obstacle recognition in autonomous vehicles. This study introduces a novel approach featuring a redesigned...

  • Article
  • Open Access
174 Views
22 Pages

2 November 2026

This study develops a Gâteaux differential-based mixed finite element formulation for bi-directionally functionally graded (BDFGM) Timoshenko beams graded along both the length and the thickness. The local effective properties are evaluated by...

(This article belongs to the Section Composites Applications)
  • Article
  • Open Access
7 Citations
2,199 Views
14 Pages

21 December 2022

The surface acoustic wave (SAW) properties of potassium titanyl phosphate (KTiOPO4, KTP) single crystal were evaluated by numerical methods. The phase velocity, electromechanical coupling coefficient, power flow deflection angle, and temperature coef...

(This article belongs to the Special Issue Advances in Crystal Material: Design, Characterization, and Applications)
  • Article
  • Open Access
1 Citations
1,357 Views
25 Pages

27 October 2025

In the processes of deep hole drilling and boring, tool deflection and chatter are prevalent problems that significantly affect the quality and efficiency of deep hole part machining. This paper designs a Helical-Type Vibration-Damping and Deflection...

(This article belongs to the Special Issue Design and Manufacturing for Lightweight Components and Structures)
  • Article
  • Open Access
3 Citations
2,990 Views
22 Pages

23 February 2023

Shear warping deformation is an important part of the flexural and constrained torsion analysis of composite box girder with corrugated steel webs (CBG-CSWs), which is also the main reason for the complex force analysis of box girders. A new practica...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
20 Citations
8,132 Views
21 Pages

A Novel Control Allocation Method for Yaw Control of Tailless Aircraft

  • Thomas R. Shearwood,
  • Mostafa R. A. Nabawy,
  • William J. Crowther and
  • Clyde Warsop

19 October 2020

Tailless aircraft without vertical stabilisers typically use drag effectors in the form of spoilers or split flaps to generate control moments in yaw. This paper introduces a novel control allocation method by which full three-axis control authority...

(This article belongs to the Special Issue Aircraft Modeling for Design, Simulation and Control)

of 4