Skip to Content
You are currently on the new version of our website. Access the old version .

64 Results Found

  • Article
  • Open Access
2 Citations
3,434 Views
7 Pages

Highly Integrated Cladding Mode Stripper Array for Compact High-Power Industrial Fiber Laser

  • Yu Liu,
  • Wenjie Wu,
  • Pengfei Zhao,
  • Shan Huang and ,
  • Yuwei Li,
  • Yue Li,
  • Min Li,
  • Rumao Tao,
  • Honghuan Lin and
  • Jianjun Wang
  • + 5 authors+ 0 author

15 December 2022

A design integrating multiple cladding mode strippers used in fiber laser architectures into a single device is proposed. This approach can increase the compactness of fiber lasers, thus contributing to industrial laser processing applications. By of...

(This article belongs to the Special Issue High-Power Lasers for Materials Processing)
  • Article
  • Open Access
4 Citations
5,884 Views
13 Pages

28 December 2020

A lab-scale packed-bed stripper containing Dixon rings was used to explore the effects of the process variables on the hydrodynamics and mass-transfer in a stripper using a mixed solvent loaded CO2. The variables are the liquid flow rate, reboiler te...

(This article belongs to the Special Issue Carbon Capture, Utilization and Storage Technology)
  • Article
  • Open Access
2 Citations
3,469 Views
16 Pages

21 November 2022

Recent efforts of both researchers and regulators regarding particulate emissions have focused on the contribution and presence of sub-23 nm particulates. Despite being previously excluded from emissions legislation with the particle measurement prog...

(This article belongs to the Special Issue Valorization of Biogenic and Not Biogenic Residuals/Byproducts from Thermochemical Processes: Diagnostic, Product Characterization, and Emissions Control)
  • Article
  • Open Access
600 Views
15 Pages

3 June 2026

The transition toward sustainable agricultural systems requires the optimization of harvesting technologies. This study evaluates the performance of an advanced stripper header in cereal harvesting, focusing on its role in reducing grain losses and f...

(This article belongs to the Section Social Ecology and Sustainability)
  • Review
  • Open Access
40 Citations
7,001 Views
23 Pages

Non-Volatile Particle Number Emission Measurements with Catalytic Strippers: A Review

  • Barouch Giechaskiel,
  • Anastasios D. Melas,
  • Tero Lähde and
  • Giorgio Martini

24 June 2020

Vehicle regulations include limits for non-volatile particle number emissions with sizes larger than 23 nm. The measurements are conducted with systems that remove the volatile particles by means of dilution and heating. Recently, the option of measu...

(This article belongs to the Special Issue Future Powertrain Technologies)
  • Article
  • Open Access
3 Citations
1,345 Views
18 Pages

Design and Testing of an Impurity Removal Device in a Stripper-and-Stick Cleaner for Machine-Harvested Long-Staple Cotton

  • Jie Wu,
  • Hui Lin,
  • Heng Jiang,
  • Xinsheng Bi and ,
  • Pahirdin Ablat,
  • Wenpu Liu and
  • Jianhao Dong
  • + 2 authors+ 0 author

28 March 2025

This study aims to address the low cleaning efficiency (73.12%) and high cotton loss rate (12.50%) of existing stripper-and-stick cleaners when processing machine-harvested long-staple cotton. Based on the material characteristics of Xinjiang long-st...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
4 Citations
3,428 Views
15 Pages

The Effect of Optimizing the Stripping and Drying Parameters During Industrial Extraction on the Physicochemical Properties of Soybean Oil

  • Toktam Mohammadi-Moghaddam,
  • Hamid Bakhshabadi,
  • Abolfazl Bojmehrani,
  • Marcos Eduardo Valdes and
  • Afsaneh Morshedi

14 February 2025

Soybean oil is the second most consumed vegetable oil worldwide and is recognized as a source of heart-healthy polyunsaturated fatty acids. Optimizing the extraction process in the oil industry is essential for both economic and environmental sustain...

(This article belongs to the Topic Advanced Oxidation Processes: Applications and Prospects, 2nd Volume)
  • Article
  • Open Access
1 Citations
3,230 Views
19 Pages

Experimental Research on the Physical and Mechanical Properties of the Tussah Cocoon for Leaf-Stripping Machine Development

  • Yongcai Zhao,
  • Yuanhang Liu,
  • Fade Li,
  • Xisheng Li and ,
  • Zhanjun Du,
  • Tiankai Guo,
  • Yinfa Yan,
  • Yao Lu and
  • Zhanhua Song
  • + 4 authors+ 0 author

28 October 2022

The physical parameters and mechanical properties of the tussah cocoon are of vital importance for the design of a tussah cocoon leaf stripper. In this paper, the freshly harvested tussah cocoons wrapped with fresh leaves (TCFL) and the plucked and d...

(This article belongs to the Section Agricultural Technology)
  • Article
  • Open Access
4,353 Views
11 Pages

1 March 2024

Heat exchangers, as essential devices for facilitating heat transfer, have found a variety applications in various industries. However, the occurrence of corrosion-related failures in real-world scenarios remains a prevalent problem that can lead to...

(This article belongs to the Special Issue Corrosion/Wear Mechanisms and Protective Methods)
  • Article
  • Open Access
18 Citations
4,819 Views
14 Pages

Influence of Channel Surface with Ozone Annealing and UV Treatment on the Electrical Characteristics of Top-Gate InGaZnO Thin-Film Transistors

  • Changyong Oh,
  • Taehyeon Kim,
  • Myeong Woo Ju,
  • Min Young Kim and ,
  • So Hee Park,
  • Geon Hyeong Lee,
  • Hyunwuk Kim,
  • SeHoon Kim and
  • Bo Sung Kim
  • + 4 authors+ 0 author

11 September 2023

The effect of the channel interface of top-gate InGaZnO (IGZO) thin film transistors (TFTs) on the electrical properties caused by exposure to various wet chemicals such as deionized water, photoresist (PR), and strippers during the photolithography...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
5 Citations
4,807 Views
28 Pages

Enhancing CO2 Capture Efficiency: Advanced Modifications of Solvent-Based Absorption Process—Pilot Plant Insights

  • Adam Tatarczuk,
  • Tomasz Spietz,
  • Lucyna Więcław-Solny,
  • Aleksander Krótki and ,
  • Tadeusz Chwoła,
  • Szymon Dobras,
  • Janusz Zdeb and
  • Marek Tańczyk
  • + 3 authors+ 0 author

28 April 2025

Since fossil fuels still dominate industry and electricity production, post-combustion carbon capture remains essential for decarbonizing these sectors. The most advanced technique for widespread application, particularly in hard-to-abate industries,...

(This article belongs to the Special Issue Carbon Capture Technologies for Sustainable Energy Production)
  • Article
  • Open Access
14 Citations
6,759 Views
14 Pages

Removing Acrylic Conformal Coating with Safer Solvents for Re-Manufacturing Electronics

  • Taofeng Lu,
  • Gregory Reimonn,
  • Gregory Morose,
  • Evan Yu and
  • Wan-Ting Chen

18 March 2021

Conformal coating is typically composed of polymeric film and is used to protect delicate electronic components such as printed-circuit boards. Without removing conformal coating, it would be difficult to repair these complicated electronics. Methyle...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
6 Citations
9,095 Views
18 Pages

Evaluation of Process Control Schemes for Sour Water Strippers in Petroleum Refining

  • Chii-Dong Ho,
  • Yih-Hang Chen,
  • Chao-Min Chang and
  • Hsuan Chang

16 February 2021

For the sour water strippers in petroleum refinery plants, three prediction models were developed first, including the estimators of sour water feed concentrations using convenient online measurements, the minimum reboiler duty and the corresponding...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
11 Citations
3,992 Views
17 Pages

24 March 2022

The solid particle number emissions of Diesel vehicles are very low due to the particulate filters as exhaust aftertreatment devices. However, periodically, the trapped particles are oxidized (i.e., active regeneration) in order to keep the backpress...

(This article belongs to the Special Issue The Effect of Vehicle Emissions on Secondary Aerosol and Air Quality)
  • Article
  • Open Access
3 Citations
2,156 Views
19 Pages

Investigating the Effect of Lubricating Oil Volatility and Ash Content on the Emission of Sub-23 nm Particles

  • Salvatore Lagana,
  • Sebastian A. Pfau,
  • Ephraim Haffner-Staton,
  • Antonino La Rocca and
  • Alasdair Cairns

19 February 2025

As the world transitions to decarbonized fuels, understanding the impact of engine oil on emissions remains crucial. Lubricant-derived particulate emissions can influence air quality and regulatory compliance in future transport. Researchers have pre...

(This article belongs to the Section Energy Science and Technology)
  • Review
  • Open Access
63 Citations
9,995 Views
24 Pages

Overview of Vehicle Exhaust Particle Number Regulations

  • Barouch Giechaskiel,
  • Anastasios Melas,
  • Giorgio Martini and
  • Panagiota Dilara

8 December 2021

Vehicle emissions are a significant source of air pollution in cities. Particulate matter (PM) is a pollutant with adverse health effects. Regulations worldwide determine the PM exhaust emissions of vehicles by gravimetric quantification of the mass...

(This article belongs to the Special Issue Advanced Processes Creating New Technologies in Tomorrow's Industry)
  • Article
  • Open Access
16 Citations
6,332 Views
19 Pages

Challenging Conditions for Gasoline Particulate Filters (GPFs)

  • Barouch Giechaskiel,
  • Anastasios Melas,
  • Victor Valverde,
  • Marcos Otura and
  • Giorgio Martini

9 January 2022

The emission limit of non-volatile particles (i.e., particles that do not evaporate at 350 °C) with size >23 nm, in combination with the real driving emissions (RDE) regulation in 2017, resulted in the introduction of gasoline particulate filt...

(This article belongs to the Section Environmental Catalysis)
  • Article
  • Open Access
3 Citations
3,149 Views
16 Pages

Inter-Comparison of Particle and Gaseous Pollutant Emissions of a Euro 4 Motorcycle at Two Laboratories

  • Piotr Bielaczyc,
  • Wojciech Honkisz,
  • Joseph Woodburn,
  • Andrzej Szczotka and ,
  • Fabrizio Forloni,
  • Dominique Lesueur and
  • Barouch Giechaskiel
  • + 2 authors+ 0 author

3 December 2021

The Euro 4 regulation, applicable since 2016 for L-category vehicles (i.e., two and three-wheelers, and mini cars) reduced the emission limits, but also introduced a new cycle, the WMTC (World Harmonized Motorcycle Test Cycle). The emission studies o...

(This article belongs to the Section E: Electric Vehicles)
  • Article
  • Open Access
6 Citations
3,765 Views
15 Pages

Reproducibility of the 10-nm Solid Particle Number Methodology for Light-Duty Vehicles Exhaust Measurements

  • Tero Lähde,
  • Barouch Giechaskiel,
  • Giorgio Martini,
  • Joseph Woodburn and ,
  • Piotr Bielaczyc,
  • Daniel Schreiber,
  • Mathias Huber,
  • Panayotis Dimopoulos Eggenschwiler,
  • Corrado Fittavolini and
  • Jürgen Spielvogel
  • + 18 authors+ 13 authors

Many countries worldwide have introduced a limit for solid particles larger than 23 nm for the type approval of vehicles before their circulation in the market. However, for some vehicles, in particular for port fuel injection engines (gasoline and g...

(This article belongs to the Special Issue Traffic Related Emission)
  • Article
  • Open Access
11 Citations
3,415 Views
17 Pages

27 October 2022

In Europe and Asia, vehicle emissions regulations include a number limit for particles larger than 23 nm, which might be reduced to 10 nm in the future. A particle number system (LABS) consists of a volatile particle remover (VPR) and a particle numb...

(This article belongs to the Special Issue Vehicle Emissions: New Challenges and Potential Solutions)
  • Feature Paper
  • Article
  • Open Access
16 Citations
4,072 Views
7 Pages

Study of the Extracted Beam Energy as a Function of Operational Parameters of a Medical Cyclotron

  • Philipp Häffner,
  • Carolina Belver Aguilar,
  • Saverio Braccini,
  • Paola Scampoli and
  • Pierre Alexandre Thonet

The medical cyclotron at the Bern University Hospital (Inselspital) is used for both routine 18 F production for Positron Emission Tomography (PET) and multidisciplinary research. It provides proton beams of variable intensity at a nominal fi...

  • Article
  • Open Access
29 Citations
4,156 Views
17 Pages

Particle Number Measurements Directly from the Tailpipe for Type Approval of Heavy-Duty Engines

  • Barouch Giechaskiel,
  • Tero Lähde,
  • Matthias Schwelberger,
  • Timo Kleinbach and ,
  • Helge Roske,
  • Enrico Teti,
  • Tim van den Bos,
  • Patrick Neils,
  • Christophe Delacroix and
  • Hua Lu Karlsson
  • + 6 authors+ 1 author

18 October 2019

The type approval of heavy-duty engines requires measurement of particulates downstream of a proportional to the exhaust flow partial flow dilution system. However, for particle number systems, which measure in real time, this is not necessary and a...

(This article belongs to the Special Issue Air Pollution)
  • Article
  • Open Access
38 Citations
6,111 Views
16 Pages

Assessment of 10-nm Particle Number (PN) Portable Emissions Measurement Systems (PEMS) for Future Regulations

  • Barouch Giechaskiel,
  • Tero Lähde,
  • Sawan Gandi,
  • Stefan Keller and ,
  • Philipp Kreutziger and
  • Athanasios Mamakos
  • + 1 author+ 0 author

The particle number (PN) emissions of vehicles equipped with particulate filters are low. However, there are technologies that can have high PN levels, especially below the currently lower regulated particle size of 23 nm. Sub-23-nm particles are als...

(This article belongs to the Special Issue Monitoring and Characterizing Particulate Matter in Environment)
  • Article
  • Open Access
3 Citations
3,401 Views
15 Pages

4 September 2024

Cereal grain crops are used as main food and raw feed materials all over the world. Among cereal crops, wheat occupies a leading place as the most valuable crop. Harvesting is the most energy-intensive stage in wheat cultivation. Therefore, improving...

(This article belongs to the Section Agricultural Mechanization and Machinery)
  • Article
  • Open Access
2 Citations
2,537 Views
12 Pages

Industrial-Scale Development of Biogas Purification and Compression System

  • Tarsisius Kristyadi,
  • Meilinda Nurbanasari,
  • Dani Rusirawan,
  • Jono Suhartono and ,
  • Lisa Kristiana,
  • Pramuda Nugraha and
  • Alfan Ekajati
  • + 2 authors+ 0 author

13 September 2025

The use of biogas in Indonesia, derived from livestock manure, palm oil waste, and organic waste, remains limited to household-scale applications due to its inefficiency in transportation and storage. This limitation arises from the presence of CO2 a...

(This article belongs to the Section B: Energy and Environment)
  • Article
  • Open Access
781 Views
17 Pages

Upgrading biogas to biomethane quality requires efficient removal of carbon dioxide (CO2) while minimizing energy consumption and equipment size. Conventional packed columns are limited by their large height, high solvent circulation rates, and signi...

(This article belongs to the Topic CO2 Capture and Renewable Energy, 2nd Edition)
  • Article
  • Open Access
11 Citations
5,680 Views
11 Pages

Improved Brain Tumor Segmentation via Registration-Based Brain Extraction

  • Maxwell Uhlich,
  • Russell Greiner,
  • Bret Hoehn,
  • Melissa Woghiren and ,
  • Idanis Diaz,
  • Tatiana Ivanova and
  • Albert Murtha
  • + 2 authors+ 0 author

12 September 2018

Automated brain tumor segmenters typically run a “skull-stripping” pre-process to extract the brain from the 3D image, before segmenting the area of interest within the extracted volume. We demonstrate that an effective existing segmenter can be impr...

  • Article
  • Open Access
20 Citations
8,760 Views
30 Pages

17 May 2018

Installing CO2 capture plants in coal-fired power stations will reduce greenhouse gas emissions and help mitigate climate change. However, the deployment of this technology faces many obstacles—in particular, high energy consumption. Aiming to...

  • Article
  • Open Access
6 Citations
4,300 Views
17 Pages

6 December 2022

A heat integration optimization method that considers the changes in process parameters is proposed to find the global optimal process scheme for a coal chemical company’s phenols and ammonia recovery process. The phenols and ammonia recovery p...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Proceeding Paper
  • Open Access
9 Citations
13,285 Views
6 Pages

CO2 Absorption Using Potassium Carbonate as Solvent

  • Dimitra Karali,
  • Konstantina Peloriadi,
  • Nikolaos Margaritis and
  • Panagiotis Grammelis

7 December 2022

One of the main sources of global warming is greenhouse gasses; the most important of which is carbon dioxide. Reducing CO2 emissions, and its utilization or storage, is a global challenge to tackle climate change. In this work, the operating conditi...

(This article belongs to the Proceedings of The 3rd International Electronic Conference on Applied Sciences)
  • Article
  • Open Access
70 Citations
9,139 Views
15 Pages

Brake Wear Particle Emissions of a Passenger Car Measured on a Chassis Dynamometer

  • Marcel Mathissen,
  • Theodoros Grigoratos,
  • Tero Lahde and
  • Rainer Vogt

17 September 2019

Brake wear emissions with a special focus on particle number (PN) concentrations were investigated during a chassis dynamometer measurement campaign. A recently developed, well-characterized, measurement approach was applied to measure brake particle...

(This article belongs to the Section Air Quality)
  • Article
  • Open Access
8 Citations
5,211 Views
14 Pages

5 April 2023

A cost-effective harvesting method and equipment for small-scale farms is essential to ensure the viability and sustainability of their operations. This study aims to retrofit and test a pull-type combine harvester for effective and efficient operati...

(This article belongs to the Topic Research Progress in Key Technologies of Planting and Harvesting Machinery)
  • Article
  • Open Access
617 Views
22 Pages

Parameter and Process Optimization for Low-Concentration CO2 Capture Using Mixed Alkanolamine Solutions

  • Tieya Jing,
  • Liqian Zhao,
  • Zhenhua Cheng,
  • Juan Zhou and ,
  • Xu He,
  • Zongtai Li,
  • Hui Zhang,
  • Jian Sun and
  • Xiaoxiang Jiang
  • + 4 authors+ 0 author

30 August 2026

To reduce the high energy consumption of conventional alkanolamine-based CO2 capture, a rate-based CO2 capture model was developed in Aspen Plus using a DETA/AEP mixed amine absorbent identified through preliminary screening experiments. The effects...

(This article belongs to the Section Carbon Cycle, Capture and Storage)
  • Article
  • Open Access
5 Citations
6,935 Views
23 Pages

Using amine-based solutions is a mature method for CO2 capture. This study simulates this process at Technology Centre Mongstad (TCM) using a rate-based model in Aspen Plus. The main purpose is to develop a rigorous model for TCM and find the operati...

  • Article
  • Open Access
9 Citations
3,163 Views
16 Pages

Differentiating Semi-Volatile and Solid Particle Events Using Low-Cost Lung-Deposited Surface Area and Black Carbon Sensors

  • Molly J. Haugen,
  • Ajit Singh,
  • Dimitrios Bousiotis,
  • Francis D. Pope and
  • Adam M. Boies

Low-cost particle sensors have proven useful in applications such as source apportionment, health, and reactivity studies. The benefits of these instruments increase when used in parallel, as exemplified with a 3-month long deployment in an urban bac...

(This article belongs to the Special Issue State-of-Art in Real-Time Air Quality Monitoring through Low-Cost Technologies)
  • Article
  • Open Access
9 Citations
3,819 Views
19 Pages

2 January 2020

Early-stage fault detection and diagnosis of distillation has been considered an essential technique in the chemical industry. In this paper, fault diagnosis of a distillation column is formulated as an inverse problem. The nonlinear least squares al...

(This article belongs to the Special Issue Chemical Process Design, Simulation and Optimization)
  • Article
  • Open Access
36 Citations
5,991 Views
8 Pages

Refractive Index Sensing through Surface Plasmon Resonance in Light-Diffusing Fibers

  • Nunzio Cennamo,
  • Luigi Zeni,
  • Ester Catalano,
  • Francesco Arcadio and
  • Aldo Minardo

18 July 2018

In this paper, we show that light-diffusing fibers (LDF) can be efficiently used as host material for surface plasmon resonance (SPR)-based refractive index sensing. This novel platform does not require a chemical procedure to remove the cladding or...

(This article belongs to the Special Issue Photonic Metamaterials)
  • Article
  • Open Access
8 Citations
5,627 Views
15 Pages

Process Simulation and Optimization of Fluid Catalytic Cracking Unit’s Rich Gas Compression System and Absorption Stabilization System

  • Jin Sun,
  • Haoshui Yu,
  • Zengqi Yin,
  • Liangliang Jiang and ,
  • Li Wang,
  • Shaolin Hu and
  • Rujin Zhou
  • + 2 authors+ 0 author

18 July 2023

In a fuel-based refinery, rich gas in the fluid catalytic cracking (FCC) unit is further processed to separate dry gas and refinery products (i.e., stabilized gasoline and liquified petroleum gas). The process is utility-intensive and costly and incl...

(This article belongs to the Special Issue Research on Process System Engineering)
  • Article
  • Open Access
93 Citations
17,753 Views
17 Pages

Recovery of N and P from Urine by Struvite Precipitation Followed by Combined Stripping with Digester Sludge Liquid at Full Scale

  • Nicolás Morales,
  • Marc Anton Boehler,
  • Sandra Buettner,
  • Christoph Liebi and
  • Hansruedi Siegrist

29 August 2013

A novel ammonia stripping method, including a CO2 pre-stripper was used to treat a mix of supernatant liquor from an anaerobic digester and urine in order to recycle nitrogen as ammonium sulfate at full-scale in the WWTP Kloten/Opfikon. Waste streams...

  • Article
  • Open Access
43 Citations
10,813 Views
36 Pages

1 October 2017

This paper presents a set of steady-state and transient data for dynamic process model validation of the chemical absorption process with monoethanolamine (MEA) for post-combustion CO2 capture of exhaust gas from a natural gas-fired power plant. The...

  • Article
  • Open Access
1 Citations
2,951 Views
28 Pages

16 March 2024

Fugitive methane emissions from the mining industry, particularly so-called ventilation air methane (VAM) emissions, are considered among the largest sources of greenhouse gas (GHG) emissions. VAM emissions not only contribute to the global warming b...

(This article belongs to the Section Separation Processes)
  • Article
  • Open Access
8 Citations
2,492 Views
15 Pages

29 November 2022

The waste oil emulsion liquid membrane produced by waste oil from oil refineries (WELM) is used to separate the phenol in purified water from the sour water stripper in oil refinery facilities, and the stability of WELM was studied. It is verified th...

(This article belongs to the Section Membrane Applications)
  • Feature Paper
  • Article
  • Open Access
8 Citations
5,214 Views
32 Pages

Multi-Objective Assessment of Heat Pump-Assisted Ethyl Acetate Production

  • Branislav Šulgan,
  • Juraj Labovský,
  • Miroslav Variny and
  • Zuzana Labovská

6 August 2021

Multi-objective (energy–economic–safety) assessment of ethyl acetate production involving a heat pump is presented in this paper. The heat pump is designed to intensify ethyl acetate separation and to reduce the total operating cost. Two ethyl acetat...

(This article belongs to the Section Chemical Processes and Systems)
  • Article
  • Open Access
31 Citations
21,415 Views
32 Pages

8 December 2020

This paper provides a multi-aspect comparison of selected methods of ethyl acetate production and shows the possibility of further reactive distillation process integration and sophisticated intensification including process stream regeneration. The...

(This article belongs to the Special Issue Process Intensification in Chemical Reaction Engineering)
  • Article
  • Open Access
17 Citations
4,150 Views
18 Pages

Design and Analysis of Novel CO2 Conditioning Process in Ship-Based CCS

  • Wentao Gong,
  • Eryk Remiezowicz,
  • Philip Loldrup Fosbøl and
  • Nicolas von Solms

16 August 2022

In this work, CO2 conditioning processes for ship-based CCS sequestration are modelled using the software APSEN HYSYS V11. This study uses the captured CO2 gas from the 3D project as the feed. The feed stream contains water, H2S, and CO as contaminan...

(This article belongs to the Special Issue Carbon Capture, Utilisation and Storage)
  • Abstract
  • Open Access
1,297 Views
1 Page

Plasmonic Sensors Based on Plastic Light-Diffusing Fibers

  • Nunzio Cennamo,
  • Francesco Arcadio,
  • Domenico Del Prete,
  • Aldo Minardo and
  • Luigi Zeni

A very simple to realize, low-cost, and highly sensitive plasmonic sensor, based on a polymeric light-diffusing fiber (LDF), is presented. The proposed surface plasmon resonance (SPR) sensor is realized by sputtering a gold nanofilm on an LDF made of...

(This article belongs to the Proceedings of The 9th International Symposium on Sensor Science)
  • Technical Note
  • Open Access
5 Citations
5,559 Views
16 Pages

Electronic Design of a Cotton Harvester Yield Monitor Calibration System

  • Mathew G. Pelletier,
  • John D. Wanjura and
  • Greg A. Holt

Several yield monitors are available for use on cotton harvesters, but none are able to maintain yield measurement accuracy across cultivars and field conditions that vary spatially and/or temporally. Thus, the utility of yield monitors as tools for...

(This article belongs to the Special Issue Robotics and Automation Engineering in Agriculture)
  • Article
  • Open Access
21 Citations
8,801 Views
17 Pages

Particulate Emissions of Euro 4 Motorcycles and Sampling Considerations

  • Barouch Giechaskiel,
  • Alessandro A. Zardini,
  • Tero Lähde,
  • Adolfo Perujo and ,
  • Anastasios Kontses and
  • Leonidas Ntziachristos
  • + 1 author+ 0 author

21 July 2019

The scientific literature indicates that solid particle number (SPN) emissions of motorcycles are usually higher than that of passenger cars. The L-category (e.g., mopeds, motorcycles) Euro 4 and 5 environmental steps were designed to reduce the emis...

(This article belongs to the Special Issue Transport Emissions and the Atmosphere)
  • Article
  • Open Access
12 Citations
3,403 Views
21 Pages

Particulate and Gaseous Emissions from a Large Two-Stroke Slow-Speed Marine Engine Equipped with Open-Loop Scrubber under Real Sailing Conditions

  • Achilleas Grigoriadis,
  • Nikolaos Kousias,
  • Anastasios Raptopoulos-Chatzistefanou,
  • Håkan Salberg and ,
  • Jana Moldanová,
  • Anna-Lunde Hermansson,
  • Yingying Cha,
  • Anastasios Kontses,
  • Zisimos Toumasatos and
  • Leonidas Ntziachristos
  • + 6 authors+ 1 author

17 July 2024

Particulate and gaseous emissions were studied from a large two-stroke slow-speed diesel engine equipped with an open-loop scrubber, installed on a 78,200 metric tonnes (deadweight) containership, under real operation. This paper presents the on-boar...

(This article belongs to the Section Air Pollution Control)
  • Technical Note
  • Open Access
7 Citations
4,387 Views
11 Pages

Several yield monitors are available for use on cotton harvesters, but none are able to maintain yield measurement accuracy across cultivars and field conditions that vary spatially and/or temporally. Thus, the utility of yield monitors as tools for...

(This article belongs to the Special Issue Robotics and Automation Engineering in Agriculture)

of 2