Electric Vehicles
A section of Energies (ISSN 1996-1073).
Section Information
Aims and Scope
There are a number of advantages to electric vehicles (EVs) over traditional cars such as low carbon emissions, no gas required, Safe to Drive. /Energies/ Section “Electric Vehicles” aims to encourage scientists to publish their experimental and theoretical results in as much detail as possible related to electric vehicles. The main topics of the section include but are not limited to:
- Ground vehicles
- Electric vehicles (EVs)
- Hybrid EVs
- On- and off-road EVs
- Railborne EVs
- Space rover vehicles
- Airborne EVs
- Seaborne EVs
- Electrically powered spacecraft
- Autonomous and Connected Vehicles
- Battery/Ultracapacitor/Fuel Cell
- Electrochemical/material characteristics
- Modelling and state estimation
- Packing technology
- Diagnosis, prognosis, and health management
- Thermal management and safety management
- Hardware design and verification
- Charging technology
- Charging strategy
- Wireless charging
- Topology Optimization
- Charging network and facilities
- Charging pile and charging station
- Vehicle to grid, vehicle to building interactions and control
- Energy management
- Electrical power systems architectures and technologies;
- Modeling and control of electric vehicles;
- Vehicle dynamics
- Modeling simulation and control, optimization, reliability and fault tolerance, safety critical operation;
- Braking systems
- Internet of vehicles
- Electric vehicles market and policy
- Electric vehicles economics
- Electric vehicles financial market
- Social behavior towards Electric vehicles
- Environmental, emission related to Electric vehicles
- Electric drive system and component technology
- Power electronic systems- converters and emerging technologies;
- Electrical air conditioning and heating systems
- Electrical machines
- Power converter
- Powertrain technology
- Steering technology
Editorial Board
Topic Board
Special Issues
Following special issues within this section are currently open for submissions:
- Wireless Power Transfer System for Electric Vehicles (Deadline: 15 June 2021)
- Early Detection of Faults in Induction Motors (Deadline: 20 June 2021)
- Magnetic Materials in Electrical Machine Prototypes (Deadline: 27 June 2021)
- Data Mining Applications for Charging of Electric Vehicles (Deadline: 30 June 2021)
- Power Electronics, Control and Energy Management Systems for Electric and Hybrid Vehicles (Deadline: 30 June 2021)
- Electric Vehicles in a Smart Grid Environment (Deadline: 30 June 2021)
- Advanced Control Strategies for Electric Power Management (Deadline: 30 June 2021)
- Fuel Consumption of Hybrid Vehicles (Deadline: 30 June 2021)
- Electric Vehicle Charging: Social and Technical Issues (Deadline: 30 June 2021)
- Modeling, Control and Fault Detection in Permanent Magnet Synchronous Motors (Deadline: 30 June 2021)
- Integration Technology for Large Scale Battery Pack in Mobile and Stationary Applications (Deadline: 10 July 2021)
- Commercial Realization of Optimal Energy Management in Hybrid Electric Vehicles and Supporting Technologies (Deadline: 20 July 2021)
- Hybrid Energy Storage System and Its Flexibility Services for Integrating Variable Generation (Deadline: 20 July 2021)
- Enhancement of Battery Lifespan, Safety, and Performance through Estimation and Control Theory and Algorithms (Deadline: 20 July 2021)
- Simulation and Optimization of Vehicle Dynamics System (Deadline: 30 July 2021)
- Energy Transfer in Alternative Vehicles (Deadline: 30 July 2021)
- Failure Diagnosis and Prognosis of Induction Machines (Deadline: 30 July 2021)
- Optimization and Integration of Ground Vehicle Systems (Deadline: 31 July 2021)
- Integration of Electric Vehicles in the Distribution Networks (Deadline: 31 July 2021)
- Power Electronics Technologies and Applications for EV Battery Charging Systems (Deadline: 31 July 2021)
- Advanced Electric Vehicle Techniques (Deadline: 31 July 2021)
- Power Converters in Power Electronics: Current Research Trends (Deadline: 5 August 2021)
- Wireless Power Transfer for Electric Vehicles (Deadline: 10 August 2021)
- Design and Application of Electrical Machines (Deadline: 25 August 2021)
- Reliability of WBG-Based Power Electronic Circuits in Electric Vehicles (Deadline: 25 August 2021)
- New Topologies of Voltage Source Converters and Current Source Converters for Integration of Fast EV Charging Stations within Smart Grids (Deadline: 25 August 2021)
- Advances in PM and Reluctance Synchronous Motor Drives (Deadline: 30 August 2021)
- Modeling, Simulation and Control of Electric Drive Systems (Deadline: 30 August 2021)
- All Electric Propulsion Technology for Electrified Aviation (Deadline: 31 August 2021)
- Battery Aging and Fast Charging (Deadline: 31 August 2021)
- Advanced Technologies for Electric Vehicles in Sustainable and Reliable Power Grids (Deadline: 31 August 2021)
- Modeling and Control of Hybrid Vehicles (Deadline: 1 September 2021)
- High Efficiency Electric Freight Vehicle (Deadline: 6 September 2021)
- Electric and Hybrid Vehicle Testing (Deadline: 10 September 2021)
- Electric Vehicle Charging Strategy to Support Renewable Energy Sources (Deadline: 10 September 2021)
- Electric Motors and Electric Drives Applied to Electric Vehicles (Deadline: 10 September 2021)
- Smart Grids for Charging Electric Vehicles (Deadline: 10 September 2021)
- Design and Management of Electric Power Grids and Distributed Energy Resources for Low-Carbon Energy Distribution Systems (Deadline: 15 September 2021)
- Sustainable Internal Combustion Engines (Deadline: 15 September 2021)
- Future Perspectives of Modelling and Testing Energy Storage Systems for Electric Vehicles (Deadline: 15 September 2021)
- Applications of Electrical Machines in Modern Electric Vehicles: Current Developments and Future Perspectives (Deadline: 20 September 2021)
- Advanced Combustion Engine for Hybrid and Low Carbon Vehicles 2020 (Deadline: 25 September 2021)
- Advanced Power Electronics in Hybrid Vehicles (Deadline: 30 September 2021)
- Modern Electrical Drives: Trends, Problems, and Challenges (Deadline: 30 September 2021)
- Future Electrical Machines (Deadline: 30 September 2021)
- Plug-In Hybrid Electric Vehicles Energy Management (Deadline: 30 September 2021)
- Design, Modelling, and Control of Multiphase Drives for Transportation (Deadline: 30 September 2021)
- Levitation and Propulsion Technologies for Sub-Sonic Ground Transportation (Hyperloop) (Deadline: 30 September 2021)
- Electric Vehicle Charging Networks (Deadline: 30 September 2021)
- Advances in Electric Public Transport (Deadline: 3 October 2021)
- Future of Road Vehicle Aerodynamics (Deadline: 10 October 2021)
- Environmental Life Cycle Assessment of Electric Vehicles (Deadline: 11 October 2021)
- Topologies and Control of Low-Voltage Power Converters for Vehicle Applications (Deadline: 15 October 2021)
- Winding Design for Electric Machines (Deadline: 25 October 2021)
- Vehicle Dynamics and Control 2021 (Deadline: 25 October 2021)
- Recent Advances in Internal Combustion Engine and Electric Vehicles (Deadline: 25 October 2021)
- Advances in Automated Driving Systems (Deadline: 25 October 2021)
- Optimal Design of Heavy Vehicles (Deadline: 25 October 2021)
- Smart Energy Management for Electric and Hybrid Electric Vehicles (Deadline: 30 October 2021)
- Neural Networks for the Control and Monitoring of Electric Drive Systems in Transportation Systems (Deadline: 30 October 2021)
- Trends in the Development of Electric Vehicle (Deadline: 31 October 2021)
- Smart Energy Management in Electric, Connected and Autonomous Vehicles (Deadline: 31 October 2021)
- The Future Development of Automobile Energy (Deadline: 31 October 2021)
- Hybrid, Electric and Fuel Cell Vehicles (Deadline: 1 November 2021)
- Advances in Vehicle Dynamics and Motion Control for Electric Vehicles (Deadline: 5 November 2021)
- Advanced Energy Harvesting Technologies (Deadline: 10 November 2021)
- New Developments and Researches in Several Aspects of Ground Vehicle Aerodynamics: Aerodynamic Optimization, Wind Noise and Thermal Management (Deadline: 25 November 2021)
- State-of-the-Art in Electric Vehicle Battery State of Charge, Health and Power Estimation (Deadline: 30 November 2021)
- Advanced Control and Estimation Concepts, and New Hardware Topologies for Future Mobility (Deadline: 30 November 2021)
- Design Optimization and Control of an Integrated Fuel Cell System (Deadline: 30 November 2021)
- Topologies and Design Considerations for High-Speed Drives (Deadline: 30 November 2021)
- Advanced Power Converters for Switched Reluctance Machine Drives (Deadline: 30 November 2021)
- Smart EV Charging (Deadline: 8 December 2021)
- CO2 Emissions from Vehicles (Deadline: 15 December 2021)
- Recent Power Electronics and Control Systems for (Plug-In) Electric (Hybrid) Vehicles (Deadline: 20 December 2021)
- Applications of Modern Methods to Control of Electric Drives (Deadline: 20 December 2021)
- Charging/Discharging Electric Vehicles via Microgrids including Vehicle-to-Grid Technology (Deadline: 20 December 2021)
- Advanced Wireless Power Transfer Technologies (Deadline: 30 December 2021)
- Energy Intensity of Transport and Environmentally Friendly Mobility (Deadline: 31 December 2021)
- Wireless Rechargeable Sensor Networks 2020 (Deadline: 31 December 2021)
- Diagnosis and Fault Tolerant Control of Electrical Vehicle (Deadline: 31 December 2021)
- Optimization of IC Engines and Engines Combustion Systems (Deadline: 31 December 2021)
- Modelling of Aerospace Vehicle Dynamics (Deadline: 31 December 2021)
- Smart Energy and Intelligent Transportation Systems (Deadline: 31 December 2021)
- Control and Management of Electric Power System in Vehicles (Deadline: 3 January 2022)
- Design, Control, Monitoring and Optimization for Electrical Machines System in Vehicles (Deadline: 3 January 2022)
- Aircraft Noise Simulation and Low-Noise Aircraft Design (Deadline: 7 January 2022)
- Advances in Nanofluids and Turbulators for Heat Transfer Enhancement (Deadline: 20 January 2022)
- Energy in Modern Transportation – Problems, Challenges and Solutions for Changes in Transport Needs Caused by Remote and Virtual Activities (Deadline: 20 January 2022)
- Electrified Powertrains for a Sustainable Mobility: Topologies, Design and Integrated Energy Management Strategies (Deadline: 24 January 2022)
- General Design, Analysis and Advanced Control of Axial-Flux Electric Machine (Deadline: 28 January 2022)
- Battery Management of Electric Vehicles (Deadline: 31 January 2022)
- High Frequency Modelling and Windings Voltage Distribution in Electrical Machines: Analysis Methods and Effects on Reliability (Deadline: 31 January 2022)
- Vehicle and Traffic Safety (Deadline: 31 January 2022)
- Energy Transition: Decentralization, Electric Vehicles, and Local Energy Markets (Deadline: 10 February 2022)
- Lithium Batteries for Vehicular Applications (Deadline: 28 February 2022)
- Fault Diagnosis and Fault-Tolerant Control for Power Systems and Machine Drives in Electrical Transport Systems (Deadline: 14 March 2022)
- Control Design for Electric Vehicles (Deadline: 31 March 2022)
- Battery Management for Electric Vehicles (Deadline: 31 March 2022)
- Advanced Modelling and Control for Cooperative Connected and Automated Mobility (Deadline: 31 May 2022)
- Magnetic Material Modelling of Electrical Machines (Deadline: 31 May 2022)
Topical Collections
Following topical collections within this section are currently open for submissions:
