We measure the near field distribution of a microwave horn with a resonant atomic probe. The microwave field emitted by a standard microwave horn is investigated utilizing Rydberg electromagnetically inducted transparency (EIT), an all-optical Rydber...
Near-nozzle atomization characteristics in air-assisted spraying were investigated through a novel 3D transient model integrating Volume-of-Fluid and Large Eddy Simulation (VOF-DPM) methods, with experimental validation of droplet distributions (Malv...
Reproducible crystallographic features between new phase and matrix are often observed during phase transformation, including orientation relationship, interfacial orientation, morphology, and so on. The geometrical matching in the interface is the k...
A simple method of non-relativistic variational calculations of the electronic structure of a two-electron atom/ion, primarily near the nucleus, is proposed. The method as a whole consists of a standard solution of a generalized matrix eigenvalue equ...
Photoelectron angular distributions of the two-photon ionization of neutral atoms are theoretically investigated. Numerical calculations of two-photon ionization cross sections and asymmetry parameters are carried out within the independent-particle...
Detecting subtle changes of surface stiffness at spatial scales and forces relevant to biological processes is crucial for the characterization of biopolymer systems in view of chemical and/or physical surface modification aimed at improving bioactiv...
Mean atomic bond strain (MABS), based on the globally averaged bond length, has recently emerged as a new strain metric that retains clear physical meaning even as severe atomic neighborhood reconstruction occurs. It has been shown to exhibit a nearl...
The mineral composition of table salt can be indicative of its origin. This work evaluated the possibility of identifying the origin of salt from four countries: Brazil, Spain, France, and Portugal. Eight metals were quantified through flame atomic a...
Single-particle electron cryomicroscopy (cryoEM) has become an indispensable tool for studying structure and function in macromolecular assemblies. As an integral part of the cryoEM structure determination process, computational tools have been devel...
The high-efficiency preparation of large-area microstructures of optical materials and precision graphic etching technology is one of the most important application directions in the atomic and near-atomic-scale manufacturing industry. Traditional fo...
In this paper, we present concurrent atomistic-continuum (CAC) simulations of the hydrogen (H) diffusion along a grain boundary (GB), nearby which a large population of dislocations are piled up, in a plastically deformed bi-crystalline bcc iron samp...
Defect-induced phenomena in 2D materials has received increasing interest among researchers due to the novel properties correlated with precise modification of materials. We performed a study of the nonlinear saturable absorption of the boron-atom-va...
The precise observation of a solid–liquid interface by means of frequency modulation atomic force microscopy (FM-AFM) was performed, demonstrating its applicability to a study on lead acid batteries using an electrochemical test cell for in-liq...
In this work, 2-F-4-OH benzoic acid was isolated in Ar matrices and conformational changes were induced by near-IR irradiating the sample. Upon deposition, three conformers could be observed in the matrix, denoted as A1, A2, and D1, respectively. A1...
Based on the electrohydrodynamic (EHD) theory, a novel method of near-field electrospray is proposed to fabricate micropatterns with micro/nano-scale particles. Compared with conventional electrospray technology, the deposition area can be decreased...
Bucchero is a well-known class of Etruscan ceramics, characterized by being entirely black both on the surface and in the body. In the present investigation, a representative set of bucchero sherds from the excavations of the Etruscan town of Tarquin...
A feasibility analysis is performed for the development and integration of a near-field scanning optical microscope (NSOM) tip–photodetector operating in the visible wavelength domain of an atomic force microscope (AFM) cantilever, involving si...
This study explores the mechanical and optical properties of nanoporous copper (NPC) films dealloyed in acid and base using qualitative and quantitative measurements. Two types of NPC films (NPC 1 and NPC 2) were prepared by dealloying precursor film...
We investigate the spontaneous emission of one atom placed near an oscillating reflecting plate. We consider the atom modeled as a two-level system, interacting with the quantum electromagnetic field in the vacuum state, in the presence of the oscill...
By considering the interaction between a two-atom system and the vacuum massless scalar field in the viewpoint of an instantaneously inertial observer, we study the rates of transition of a uniformly accelerated two-atom system in the symmetric/antis...
As nanofabrication advances toward atom-by-atom control of surface morphology, plasmonic electrodes and nanogap devices are being pushed into a regime where atomic-scale protrusions and sub-nanometer separations become accessible. In this extreme lim...
The research studied the comparison of the night air temperatures and the atomic oxygen airglow intensities at the mesopause obtained with satellite and ground-based instruments. Satellite data used in this study were obtained with the SABER limb-sca...
Nano-manipulation technology, as a kind of “bottom-up” tool, has exhibited an excellent capacity in the field of measurement and fabrication on the nanoscale. Although variety manipulation methods based on probes and microscopes were prop...
The ϕRSA1 bacteriophage has been isolated from Ralstonia solanacearum, a gram negative bacteria having a significant economic impact on many important crops. We solved the three-dimensional structure of the ϕRSA1 mature capsid to 3.9 Å resolution by...
The effect of irradiation by a hyperthermal-atomic-oxygen beam on hydrogenated titanium-doped diamond-like carbon (hydrogenated Ti-DLC) films, applied as a solid lubricant for equipment used in low-earth orbit was investigated. Unlike the film thickn...
Optical fibre micro/nano tips (OFTs), defined here as tapered fibres with a waist diameter ranging from a few microns to tens of nanometres and different tip angles (i.e., from tens of degrees to fractions of degrees), represent extremely versatile t...
The main objectives of this work are the development of fundamental extensions to existing scanning microwave microscopy (SMM) technology to achieve quantitative complex impedance measurements at the nanoscale. We developed a SMM operating up to 67 G...
The directed energy deposition (DED) parameters were determined for near-β alloy Ti-55511 by employing statistical design of experiments (DOEs) methods. Parameters resulting in fully dense freeform deposits were identified using two sequential D...
Both vibrational-excitation-induced (by (N)IR laser) and spontaneous (by H atom tunneling) conformational changes are often investigated by matrix-isolation spectroscopy. It is well known that rigid hosts, such as solid noble gases, N2, or normal-H2,...
We are concerned with the classical approach to atomic motions in the vicinity of a wire charged by an oscillating voltage. This mechanism has been proposed to serve for trapping cold neutral atoms. We prove that, under some conditions, the atom must...
Scattering of light on relativistic heavy ion beams is widely used for characterizing and tuning the properties of both the light and the ion beam. Its elastic component—Rayleigh scattering—is investigated in this work for photon energies close to ce...
Hydrogen-nitrogen hybrid passivation treatment for growing high-property gate oxide films by high-temperature wet oxidation, with short-time NO POA, is proposed and demonstrated. Secondary ion mass spectroscopy (SIMS) measurements show that the propo...
The present study investigates the influence of atomizing air-to-liquid mass ratio (ALR) on the near-field spray characteristics and stability of a novel twin-fluid injector that integrates bubble-bursting for primary atomization and shear-induced se...
We investigate the behavior of the kinetic and the exchange energy densities near the nuclear cusp of atomic systems. Considering hydrogenic orbitals, we derive analytical expressions near the nucleus, for single shells, as well as in the semiclassic...
We completed B3LYP and B3PW computations for AO- and BO2-terminated (001) as well as AO3- and B-terminated (111) surfaces of BSO, BTO, STO, PTO, CTO, BZO, SZO, and CZO perovskites. In particular, we performed the first B3LYP computations for polar BS...
Graphene nanomesh (GNM) is one of the most intensively studied materials today. Chemical activity of atoms near GNM’s nanoholes provides favorable adsorption of different atoms and molecules, besides that, GNM is a prospect material for growing...
Structural defects were investigated by a recently proposed structural parameter, quasi-nearest atom (QNA), in a modeled Zr50Cu50 metallic glass through molecular dynamics simulations. More QNAs around an atom usually means that more defects are loca...
Electron cryo-microscopy (cryo-EM) has emerged as a powerful method by which to obtain three-dimensional (3D) structures of macromolecular complexes at atomic or near-atomic resolution. However, de novo building of atomic models from near-atomic reso...
Absorption spectra of two orthogonal linearly polarized X-rays in a single CeCoGe3 crystal were measured at the ID12 beamline of the ESRF for the energies near the K-edges of Ge, Co and near the L23 edges of Ce. The X-ray natural linear dichroism (XN...
The Coulomb focusing effect on the electron–atom bremsstrahlung spectrum is investigated in nonthermal Lorentzian plasmas. The universal expression of the cross section of nonrelativistic electron–atom bremsstrahlung process is obtained b...
We report a chip-scale atomic magnetometer based on coherent population trapping, which can operate near zero magnetic field. By exploiting the asymmetric population among magnetic sublevels in the hyperfine ground state of cesium, we observe that th...
AC Stark shifts have an impact on the dynamics of atoms interacting with a near-resonant quantized single-mode cavity field, which is relevant to a single atom micromaser. In this study, we demonstrate that, when the field is in a squeezed coherent s...
We study the motion-induced radiation due to the non-relativistic motion of an atom, coupled to the vacuum electromagnetic field by an electric dipole term, in the presence of a static graphene plate. After computing the probability of emission for a...
The rigorous Regge-pole method is used to investigate negative-ion formation in actinide atoms through electron elastic total cross sections (TCSs) calculation. The TCSs are found to be characterized generally by negative-ion formations, shape resona...
With the rapid development of modern physics, atomic gyroscopes have been demonstrated in recent years. There are two types of atomic gyroscope. The Atomic Interferometer Gyroscope (AIG), which utilizes the atomic interferometer to sense rotation, is...
The L-subshell ionization cross sections and total L–X-ray production cross sections for the Ag atom by the electron impact near the ionization threshold were calculated with a classical-trajectory Monte Carlo method. The results were compared...
The detailed control achieved over single optically trapped neutral atoms makes them candidates for applications in quantum metrology and quantum information processing. The last few decades have seen different methods developed to optimize the prepa...
The surface structure and electronic properties of Mg vacancy defects on talc (001) and impurity defects with Fe, Mn, Ni, Al, and Ca replacing Mg atoms were calculated by using density functional theory. The calculation results show that the order of...
Atomic-scale strain is the basis of a material’s macroscopic deformation behavior. The current measure of atomic-scale strain in the form of the Green–Lagrange tensor loses its physical meaning beyond the yield point, as atomic neighborho...
Based on density functional theory, this paper studies the adsorption and the subsurface occupation by H on LaFeO3 (010) surface and their corresponding transition states. As shown from the results, the best storage positions of hydrogen are on the O...
of 23