Skip to Content

4,335 Results Found

  • Article
  • Open Access
3 Citations
5,971 Views
8 Pages

5 December 2016

To improve the jetting performance of liquid metals, an electromagnetic micro-jetting (EMJ) valve that realizes drop-on-demand (DOD) jetting while not involving any valve core or moving parts was designed. The influence of the lead angle of the nozzl...

(This article belongs to the Special Issue Droplet Microfluidics: Techniques and Technologies, Volume II)
  • Article
  • Open Access
4 Citations
3,001 Views
21 Pages

A series of wind tunnel tests were performed to investigate the effect of turbulent inflows on the aerodynamic characteristics of variously modified trough incident leading-edge-protuberanced (LEP) wing configurations at various turbulence intensitie...

(This article belongs to the Special Issue Bio-Inspired Fluid Flows and Fluid Mechanics)
  • Article
  • Open Access
5 Citations
5,756 Views
22 Pages

Deep-Learning-Based Estimation of the Spatial QRS-T Angle from Reduced-Lead ECGs

  • Ana Santos Rodrigues,
  • Rytis Augustauskas,
  • Mantas Lukoševičius,
  • Pablo Laguna and
  • Vaidotas Marozas

20 July 2022

The spatial QRS-T angle is a promising health indicator for risk stratification of sudden cardiac death (SCD). Thus far, the angle is estimated solely from 12-lead electrocardiogram (ECG) systems uncomfortable for ambulatory monitoring. Methods to es...

(This article belongs to the Special Issue ECG Signal Processing and Analysis, Computational Technology and Applications)
  • Article
  • Open Access
1,332 Views
24 Pages

The present study provides a comprehensive analysis of the grinding process of spiroid worm shafts, focusing on the combined application of lathe center displacement and lead angle correction on a conventional cylindrical grinding machine. The object...

  • Article
  • Open Access
3 Citations
2,492 Views
16 Pages

Study on Optimization of Nozzle Angle for Oxygen-Rich Side-Blown Lead Melting Furnace

  • Zhiwei Jiang,
  • Xu Wang,
  • Qingwei Qin,
  • Zhengming Yi and ,
  • Rongsheng Chen and
  • Haibo Tang
  • + 1 author+ 0 author

13 March 2023

Taking an oxygen-rich side-blown lead melting furnace made by a company as the research object, the three-dimensional design software Solidworks was used to construct a model at an equal scale, and established a physical model which is in line with t...

  • Feature Paper
  • Article
  • Open Access
8 Citations
2,242 Views
9 Pages

Lead Detection in a Gig-Lox TiO2 Sponge by X-ray Reflectivity

  • Valentina Arena,
  • Emanuele Smecca,
  • Salvatore Valastro,
  • Corrado Bongiorno and ,
  • Giuseppe Fisicaro,
  • Ioannis Deretzis,
  • Carlo Spampinato,
  • Giovanni Mannino,
  • Sandro Dattilo and
  • Alessandra Alberti
  • + 8 authors+ 3 authors

18 April 2023

The importance of lead analysis in environmental matrices becomes increasingly relevant due to the anthropogenic spread of toxic species in nature. Alongside the existing analytical methods to detect lead in a liquid environment, we propose a new dry...

(This article belongs to the Special Issue Chemical-Physical Properties and Applications of Nano-Scaled Oxides)
  • Article
  • Open Access
1,254 Views
20 Pages

Investigations on the Effect of Inclination Angle on the Aerodynamic Performance of a Two-Stage Centrifugal Compressor of a Proton Exchange Membrane Fuel Cell System

  • Wenke Wang,
  • Dengfeng Yang,
  • Li Guo,
  • Rui Wu and ,
  • Xiangyi Zhou,
  • Qian Zhang,
  • Qingyi Kong and
  • Leon Hu
  • + 3 authors+ 0 author

18 June 2025

This study examines how leading-edge inclination angles affect a two-stage centrifugal compressor’s aerodynamic performance using numerical and experimental methods. Five impellers with varied inclination configurations were designed for both s...

  • Article
  • Open Access
3 Citations
1,732 Views
20 Pages

21 December 2024

The paper presents the results of an analysis of the effect of brushing on the edge condition of workpieces with complex geometric shapes, formed during milling, on a five-axis DMU 100 monoBLOCK machining center. A set of EN-AW 7075 aluminum alloy sp...

(This article belongs to the Special Issue Material Surface Topography Measurement, Analysis and Characterization)
  • Article
  • Open Access
1 Citations
2,455 Views
11 Pages

Angle Dependence of Electrode Lead-Related Artifacts in Single- and Dual-Energy Cardiac ECG-Gated CT Scanning—A Phantom Study

  • Piotr Tarkowski,
  • Elżbieta Siek,
  • Grzegorz Staśkiewicz,
  • Dennis K. Bielecki and
  • Elżbieta Czekajska-Chehab

27 June 2024

Background: The electrodes of implantable cardiac devices (ICDs) may cause significant problems in cardiac computed tomography (CT) because they are a source of artifacts that obscure surrounding structures and possible pathology. There are a few mil...

(This article belongs to the Special Issue Technological Advancements and Clinical Innovations in Diagnostic and Interventional Radiology)
  • Article
  • Open Access
1 Citations
1,225 Views
16 Pages

Pressure Pulsation and Energy Dissipation Mechanism of a Pump-Turbine Considering Runner Blade Leading Edge Effect

  • Bin Liu,
  • Yongyao Luo,
  • Jinhui Ouyang,
  • Xupeng Chen and ,
  • Shizhe Liu and
  • Han Zhang
  • + 1 author+ 0 author

7 November 2025

Efficiency and stability significantly determine the operating quality of a pump-turbine, and the runner blade leading edge angle (BLEA) is a critical factor influencing these performance indicators. In this study, numerical simulations were conducte...

(This article belongs to the Section Hydraulics and Hydrodynamics)
  • Article
  • Open Access
3 Citations
2,789 Views
18 Pages

There are plans to set up a space-based gravitational wave observatory that will use an ultra-large-scale laser interferometer in space to detect medium- and low-frequency gravitational waves. Both heliocentric and geocentric formations adopt the met...

(This article belongs to the Special Issue Advanced Technology of Distributed Space Systems: Formation-Flying, Swarms, and Constellations)
  • Article
  • Open Access
4 Citations
3,132 Views
11 Pages

The Use of Androgen Deprivation Therapy for Prostate Cancer Lead to Similar Rate of Following Open Angle Glaucoma: A Population-Based Cohort Study

  • Po-Jen Yang,
  • Chiao-Wen Lin,
  • Chia-Yi Lee,
  • Jing-Yang Huang and ,
  • Ming-Ju Hsieh and
  • Shun-Fa Yang
  • + 1 author+ 0 author

26 May 2023

This study aimed to survey the effect of androgen deprivation therapy (ADT) on the development of open angle glaucoma (OAG) in prostate cancer using the data from national health insurance research database (NHIRD) of Taiwan. A retrospective cohort s...

(This article belongs to the Topic Advances in Genetics and Precision Medicine in Human Diseases)
  • Article
  • Open Access
13 Citations
8,531 Views
13 Pages

14 October 2019

Airfoil blades can experience a significant change of angle of attack during operation cycles, which may lead to static or dynamic stall in various applications. It is unclear how elements distributed at the leading edge would affect the aerodynamic...

  • Article
  • Open Access
1,217 Views
23 Pages

Simulation of Combustor Inlet Flow Field via Segmented Blade Twist and Leading-Edge Baffles

  • Dong Jiang,
  • Huadong Li,
  • Xiang Li,
  • Yongbo Li and ,
  • Yang Hu,
  • Chang Liu,
  • Chenghua Zhang and
  • Yunfei Yan
  • + 3 authors+ 0 author

27 August 2025

High-fidelity replication of compressor exit flow fields is critical for combustor design, yet current simulation facilities lack effective, decoupled control of flow parameters. This study proposes a coordinated optimization strategy combining segme...

(This article belongs to the Special Issue Numerical Investigation of Heat & Mass Transfer in Reacting Hydrocarbon Flows for Aerospace Energy Conversion)
  • Article
  • Open Access
10 Citations
8,644 Views
12 Pages

Environmental Pollution by Lost Fishing Tackle: A Systematic Assessment in Lake Eixendorf

  • Joachim Pander,
  • Andreas H. Dobler,
  • Philipp Hoos and
  • Juergen Geist

Environmental pollution by lost fishing tackle is hardly considered in freshwater management. We collected and classified lost angling tackle during the dewatering of Lake Eixendorf, Germany. Based on the results, 1 item per 100 m2 lake area was foun...

  • Article
  • Open Access
1 Citations
3,074 Views
16 Pages

The geometry of a compressor leading edge has an important effect on the aerodynamic performance at an off-designed incidence angle. The current geometric design methods of the leading edge are usually developed based on the flow characteristics at t...

(This article belongs to the Special Issue Fluid-Dynamics and Heat Transfer in Aerospace Propulsion Systems)
  • Article
  • Open Access
2 Citations
2,166 Views
26 Pages

Model-Free Control for Doubly Salient Permanent Magnet-Generator-Based Tidal Stream Turbine Considering Flux-Weakening Operation

  • Hao Chen,
  • Luming Liu,
  • Yassine Amirat,
  • Zhibin Zhou and ,
  • Nadia Aϊt-Ahmed and
  • Mohamed Benbouzid
  • + 1 author+ 0 author

30 November 2023

Renewable energy generation is increasingly important due to serious energy issues. A Doubly Salient Permanent Magnet Generator (DSPMG) can be an interesting candidate for tidal stream renewable energy systems. However, the special structure makes th...

(This article belongs to the Section Marine Energy)
  • Article
  • Open Access
2,486 Views
20 Pages

15 January 2026

Compared with conventional symmetric aircraft, the oblique-wing aircraft offers significant advantages across a wide speed range due to the variable oblique angle. However, the asymmetric aerodynamic characteristics will arise from the differential l...

(This article belongs to the Special Issue Aircraft Conceptual Design: Tools, Processes and Examples)
  • Article
  • Open Access
19 Citations
4,626 Views
20 Pages

10 July 2020

The orientation of the tool axis and the variable curvature of the machined profile of a sculptured surface have a significant impact on the roughness and topography of the surface in the process of 5-axis milling by means of a toroidal milling cutte...

  • Article
  • Open Access
20 Citations
4,852 Views
32 Pages

Analytical Model of Tapered Thread Made by Turning from Different Machinability Workpieces

  • Oleh Onysko,
  • Volodymyr Kopei,
  • Cristian Barz,
  • Yaroslav Kusyi and ,
  • Saulius Baskutis,
  • Michal Bembenek,
  • Predrag Dašić and
  • Vitalii Panchuk
  • + 3 authors+ 0 author

High-precision tapered threads are widely used in hard-loaded mechanical joints, especially in the aggressive environment of the drilling of oil and gas wells. Therefore, they must be made of workable materials often difficult to machine. This requir...

(This article belongs to the Special Issue Innovations in the Design, Simulation, and Manufacturing of Production Systems)
  • Article
  • Open Access
697 Views
35 Pages

General Geometric Model for the Cutting Edge in Thread Turning

  • Cristian Barz,
  • Oleh Onysko,
  • Volodymyr Kopei,
  • Yaroslav Kusyi and ,
  • Lesia Shkitsa,
  • Predrag Dašić and
  • Saulius Baskutis
  • + 2 authors+ 0 author

Modern requirements for highly critical threads, such as drilling tool-joint threads or trapezoidal threads of heavy machine tools, impose requirements for high accuracy and at the same time wear resistance of thread cutters. Conventional thread cutt...

(This article belongs to the Special Issue Innovations in the Design, Simulation, and Manufacturing of Production Systems)
  • Article
  • Open Access
4 Citations
3,105 Views
21 Pages

Dysfunction of an Anaphase-Promoting Complex Subunit 8 Homolog Leads to Super-Short Petioles and Enlarged Petiole Angles in Soybean

  • Yi Gao,
  • Jinlong Zhu,
  • Hong Zhai,
  • Kun Xu and ,
  • Xiaobin Zhu,
  • Hongyan Wu,
  • Wenjing Zhang,
  • Shihao Wu,
  • Xin Chen and
  • Zhengjun Xia
  • + 5 authors+ 0 author

Plant height, petiole length, and the angle of the leaf petiole and branch angles are crucial traits determining plant architecture and yield in soybean (Glycine max L.). Here, we characterized a soybean mutant with super-short petioles (SSP) and enl...

(This article belongs to the Section Molecular Plant Sciences)
  • Article
  • Open Access
2 Citations
2,545 Views
12 Pages

Electroelastic Coupled-Wave Scattering and Dynamic Stress Concentration of Piezoceramics Containing Regular N-Sided Holes

  • Jiang Lin,
  • Chuanping Zhou,
  • Xiao Han,
  • Yongping Gong and ,
  • Jiawei Fan,
  • Junqi Bao,
  • Huawei Ji,
  • Jing Ni and
  • Weihua Zhou
  • + 4 authors+ 0 author

19 July 2022

In this paper, the calculation method of dynamic stress concentration around piezoelectric ceramics containing regular n-sided holes under the action of electroelastic coupling wave was studied, and it was applied to promising barium calcium zirconat...

(This article belongs to the Section Actuator Materials)
  • Article
  • Open Access
43 Citations
12,006 Views
18 Pages

Field Weakening Operation Control Strategies of PMSM Based on Feedback Linearization

  • Kai Zhou,
  • Min Ai,
  • Dongyang Sun,
  • Ningzhi Jin and
  • Xiaogang Wu

28 November 2019

Based on current research into the mathematical model of the permanent magnet synchronous motor (PMSM) and the feedback linearization theory, a control strategy established upon feedback linearization is proposed. The Lie differential operation is pe...

  • Article
  • Open Access
862 Views
13 Pages

Wettability and Calculated Work of Adhesion of Bi-Containing SAC305 and SAC405 Solders on ENIG and Cu-OSP Finishes

  • Zuriel Caribe Couvertier,
  • Taylor Venise Douglas,
  • Omar Ahmed,
  • Peng Su and ,
  • Ellen Hyeran Kang,
  • Kausik Mukhopadhyay and
  • Tengfei Jiang
  • + 2 authors+ 0 author

Reliable solder joint formation in electronic packaging depends on the coupled effects of solder composition and pad finish on molten solder wetting, yet direct comparisons of Bi-modified SAC305 and SAC405 solders on common surface finishes remain li...

  • Article
  • Open Access
9 Citations
4,608 Views
28 Pages

10 January 2025

An experimental investigation was carried out to understand the effects of LEP (leading-edge protuberance) blades on the structural characteristics of VAWTs. A series of experiments were performed on VAWTs with straight and LEP blades for a wide rang...

(This article belongs to the Section A3: Wind, Wave and Tidal Energy)
  • Article
  • Open Access
12 Citations
4,544 Views
16 Pages

The seed metering process of a fluted force-feed seeder was simulated using the Discrete Element Method and its parameters optimized using the Box–Behnken Design of Experiments and the Response Surface Method. The rotational speed of the feed r...

(This article belongs to the Section Agricultural Technology)
  • Feature Paper
  • Article
  • Open Access
8 Citations
2,128 Views
19 Pages

18 June 2024

This study investigates the power generation capability of an oscillating wing energy harvester equipped with two actively controlled flaps positioned at the leading and trailing flaps of the wing. Various parameters, including flap lengths and pitch...

(This article belongs to the Special Issue Computational Fluid Dynamics: Technologies and Applications for Renewable Energy Systems)
  • Article
  • Open Access
6 Citations
3,640 Views
11 Pages

Immediate Effects of Foam Roller and Stretching to the Lead Hip on Golfers Swing: A Randomized Crossover Trial

  • Yuji Hamada,
  • Kiyokazu Akasaka,
  • Takahiro Otsudo,
  • Yutaka Sawada and ,
  • Hiroshi Hattori,
  • Yuki Hasebe,
  • Yuto Kikuchi and
  • Toby Hall
  • + 3 authors+ 0 author

Golfers with decreased range of motion (ROM) of their leading hip internal rotation (IR) have increased lumbar rotation ROM and load. This study investigated the effects of foam roller (FR) applied to their leading hip muscles combined with stretchin...

(This article belongs to the Special Issue Physiotherapy and Rehabilitation of Musculoskeletal Disorders)
  • Article
  • Open Access
2 Citations
3,697 Views
20 Pages

Task-Adaptive Angle Selection for Computed Tomography-Based Defect Detection

  • Tianyuan Wang,
  • Virginia Florian,
  • Richard Schielein,
  • Christian Kretzer and ,
  • Stefan Kasperl,
  • Felix Lucka and
  • Tristan van Leeuwen
  • + 2 authors+ 0 author

23 August 2024

Sparse-angle X-ray Computed Tomography (CT) plays a vital role in industrial quality control but leads to an inherent trade-off between scan time and reconstruction quality. Adaptive angle selection strategies try to improve upon this based on the id...

(This article belongs to the Section AI in Imaging)
  • Article
  • Open Access
4 Citations
2,029 Views
13 Pages

17 May 2023

In this study, single point incremental forming (SPIF) of Al-Li alloy sheets under different forming angles are studied via both experimental methods and numerical simulations. The effect of different forming angle on the geometric accuracy of SPIFed...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
17 Citations
5,752 Views
28 Pages

This paper presents the design and wind tunnel test results of a wing including a morphing leading edge for a medium unmanned aerial vehicle with a maximum wingspan of 5 m. The design of the morphing leading edge system is part of research on the des...

  • Article
  • Open Access
3 Citations
1,855 Views
12 Pages

Theoretical Investigation of Selection (Calculation) of Design Parameters of Modular Draft Device in Aggregation of Semitrailers

  • Volodymyr Bulgakov,
  • Aivars Aboltins,
  • Hristo Beloev,
  • Volodymyr Nadykto and ,
  • Simone Pascuzzi,
  • Mariia Ruzhylo and
  • Semjons Ivanovs
  • + 2 authors+ 0 author

12 October 2022

One of the directions for expanding the functional properties of modular draft devices (MDD) is their use with semitrailers (using a fifth-wheel coupling, installed on the technological module). The issue with this is due to their ability to create s...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
3 Citations
3,941 Views
15 Pages

10 March 2021

A sweptback angle can directly regulate a leading-edge vortex on various aerodynamic devices as well as on the wings of biological flyers, but the effect of a sweptback angle has not yet been sufficiently investigated. Here, we thoroughly investigate...

(This article belongs to the Section Applied Biosciences and Bioengineering)
  • Article
  • Open Access
1,249 Views
21 Pages

16 April 2025

The physical and chemical properties of methanol differ significantly from those of conventional diesel, and its injection strategy plays a critical role in engine performance. In this study, a three-dimensional simulation model of a methanol–d...

(This article belongs to the Section I2: Energy and Combustion Science)
  • Article
  • Open Access
4 Citations
3,102 Views
20 Pages

13 October 2021

To provide a clean and cheap source of natural ventilation in windy and arid zones, a windcatcher facility is the best option. This paper aims to study the effect of the inlet opening angle of a new windcatcher model with different values ranging fro...

(This article belongs to the Collection Sustainable Electric Power Systems Research)
  • Article
  • Open Access
20 Citations
4,955 Views
19 Pages

Parametric Investigation of Leading-Edge Slats on a Blended-Wing-Body UAV Using the Taguchi Method

  • Spyridon Antoniou,
  • Stavros Kapsalis,
  • Pericles Panagiotou and
  • Kyros Yakinthos

17 August 2023

The current study investigated the effect of leading-edge slats on the longitudinal stability at high angles of attack of a Blended-Wing-Body (BWB) Unmanned Air Vehicle (UAV). Using a Design of Experiments (DOE) approach and, specifically, the Taguch...

  • Article
  • Open Access
3 Citations
2,860 Views
17 Pages

Computational Investigation of Wind Loads on Tilted Roof-Mounted Solar Array

  • Zhibin Tu,
  • Gensheng Zheng,
  • Jianfeng Yao,
  • Guohui Shen and
  • Wenjuan Lou

24 November 2022

A detailed computational investigation of the wind field around tilted solar modules mounted on a large building roof has been undertaken, utilizing the Reynolds-Averaged Navier-Stokesv (RANS) approach supplied with the SST k − ω turbulen...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
1 Citations
5,417 Views
13 Pages

8 February 2024

X-ray computed tomography (XCT) has become a powerful technique for studying lithium-ion batteries, allowing non-destructive 3D imaging across multiple spatial scales. Image quality is particularly important for observing the internal structure of li...

(This article belongs to the Special Issue Sensors in 2024)
  • Article
  • Open Access
1 Citations
3,325 Views
21 Pages

25 February 2022

To obtain the influence of airfoil camber on the internal pressure fluctuation of a bidirectional axial-flow pump, the unsteady Reynolds time-averaged Navier–Stokes (URANS) equation was solved to predict the internal flow structure under three...

(This article belongs to the Special Issue Design and Optimization Method of Pumps)
  • Article
  • Open Access
9 Citations
5,405 Views
21 Pages

Computational Study of the Plasma Actuator Flow Control for an Airfoil at Pre-Stall Angles of Attack

  • Takuto Ogawa,
  • Kengo Asada,
  • Makoto Sato,
  • Tomoaki Tatsukawa and
  • Kozo Fujii

9 September 2022

Large-eddy simulations of the flows over an NACA0015 airfoil were conducted to investigate a flow control authority of a dielectric barrier discharge plasma actuator at pre-stall angles of attack. The Reynolds number was set to 63,000, and angles of...

(This article belongs to the Special Issue Flow Control, Active and Passive Applications)
  • Article
  • Open Access
9 Citations
3,496 Views
16 Pages

Sand Erosion Resistance and Failure Mechanism of Polyurethane Film on Helicopter Rotor Blades

  • Linfeng Zheng,
  • Jinjuan Fan,
  • Qing Gong,
  • Wei Sun and
  • Xinghui Jia

11 November 2023

Polyurethane is widely used on the surface of composite materials for rotor blades as sand erosion protection materials. The failure mechanism investigation of polyurethane film under service conditions is useful for developing the optimal polyuretha...

(This article belongs to the Special Issue Damage and Failure Analysis of Polymer-Based Composites)
  • Review
  • Open Access
61 Citations
19,320 Views
14 Pages

A Review of Neovascular Glaucoma: Etiology, Pathogenesis, Diagnosis, and Treatment

  • Danielė Urbonavičiūtė,
  • Dovilė Buteikienė and
  • Ingrida Janulevičienė

18 December 2022

Neovascular glaucoma (NVG) is a rare, aggressive, blinding secondary glaucoma, which is characterized by neovascularization of the anterior segment of the eye and leading to elevation of the intraocular pressure (IOP). The main etiological factor is...

(This article belongs to the Topic An Update on the Diagnosis and Management Options of Glaucoma)
  • Article
  • Open Access
4,948 Views
10 Pages

25 June 2015

We study the heat generation in ferromagnet-quantum dot-ferromagnet system by the non-equilibrium Green’s functions method. Heat generation under the influence of ferromagnet leads is very different compared with a system with normal metal leads. The...

  • Article
  • Open Access
10 Citations
5,783 Views
17 Pages

4 March 2019

Under real-time operation, early detection of oscillations that lead to instability is of noteworthy importance for power system operators. This paper demonstrates how the relative angle (RA) obtained with online data from phasor measurement units (P...

(This article belongs to the Section F: Electrical Engineering)
  • Article
  • Open Access
3 Citations
3,301 Views
15 Pages

The aerodynamic effects of wing corrugation on insect flight have received widespread attention. However, there has hardly been any specific focus on dynamic changes to corrugation angle in the models. The flexible vein joints containing resilin in t...

  • Article
  • Open Access
5 Citations
2,730 Views
17 Pages

A Suppression Method of Commutation Failure in LCC-UHVDC Systems Based on the Dynamic Tracking of the Turn-Off Angle Setting Value

  • Hua Wang,
  • Ao Zheng,
  • Ziwen Liu,
  • Wei Liu and ,
  • Xueqing Pan and
  • Chunsun Tian
  • + 1 author+ 0 author

Commutation failure is still one of the most common faults in LCC-UHVDC (line commutated converter-based, ultra-high voltage direct current) systems, and if the inverter side, extinction angle, and rectification value remain constant during the fault...

  • Article
  • Open Access
6 Citations
3,410 Views
24 Pages

The Effect of the Oleophobicity Deterioration of a Membrane Surface on Its Rejection Capacity: A Computational Fluid Dynamics Study

  • Amgad Salama,
  • Adel Alyan,
  • Mohamed El Amin,
  • Shuyu Sun and ,
  • Tao Zhang and
  • Mohamed Zoubeik
  • + 1 author+ 0 author

In this work, the effects of the deteriorating affinity-related properties of membranes due to leaching and erosion on their rejection capacity were studied via computational fluid dynamics (CFD). The function of affinity-enhancing agents is to modif...

(This article belongs to the Section Membrane Physics and Theory)
  • Proceeding Paper
  • Open Access
1 Citations
1,287 Views
10 Pages

The Characterization of Deformable Photovoltaic Modules

  • Mohammad Isaied and
  • Anas Al Tarabsheh

The system under investigation is a deformable photovoltaic–wind hybrid system which utilizes both solar and wind energy by combining PV modules with a vertical-axis wind turbine. This system contains 5 PV modules separated by 72° angles; t...

(This article belongs to the Proceedings of The 4th International Conference on Communications, Information, Electronic and Energy Systems)
  • Article
  • Open Access
2 Citations
871 Views
18 Pages

Effects of Inflow Deflection Angle on the Stall Formation Mechanism and Flow Field Structure in a Vertical Axial-Flow Pump

  • Fan Meng,
  • Qixiang Hu,
  • Jinhe Liu,
  • Yanjun Li and ,
  • Guangjian Zhang and
  • Jiaxing Lu
  • + 1 author+ 0 author

14 November 2025

The influence of inflow angle on the stall characteristics of a vertical axial flow pump is investigated numerically by solving the unsteady Reynolds-averaged Navier–Stokes equations. The study predicts both performance parameters and internal...

(This article belongs to the Section Machine Design and Theory)

of 87