Sustainable Engineering and Science
A section of Sustainability (ISSN 2071-1050).
Editorial Board
Topic Board
Special Issues
Following special issues within this section are currently open for submissions:
- Innovation in Life Cycle Sustainability Assessment of Emerging Technologies (Deadline: 31 August 2021)
- Sustainability and Resilience to Climate Change Hazards and Gender Equality (Deadline: 31 August 2021)
- Industry 4.0 Impacts on Lean Production Systems: Sustainable Practices (Deadline: 31 August 2021)
- Sustainable Pipelines and Unsaturated Soils (Deadline: 31 August 2021)
- Sustainability and Anaerobic Digestion Technologies (Deadline: 31 August 2021)
- Sustainable Fashion and Textile Recycling (Deadline: 31 August 2021)
- Co-optimisation of CO2 Storage and Hydrocarbon Recovery (Deadline: 31 August 2021)
- Ropeways: New Trends for Applications, Technique and Simulation (Deadline: 31 August 2021)
- Networked Intelligent Systems for a Sustainable Future (Deadline: 31 August 2021)
- Sustainable and Safe Process Design and Operation (Deadline: 31 August 2021)
- Sustainable Design for Zero Carbon Buildings (Deadline: 31 August 2021)
- Development of Green Infrastructure Design for Sustainable Social-Ecological System (Deadline: 31 August 2021)
- Sustainable Construction and Innovative Building Materials (Deadline: 31 August 2021)
- Sustainable Food Systems and Circular Bioeconomy (Deadline: 31 August 2021)
- Towards the Sustainability of AI; Multi-Disciplinary Approaches to Investigate the Hidden Costs of AI (Deadline: 1 September 2021)
- Engineering for the Sustainable Development Goals (SDGs) of 2030 Agenda (Deadline: 15 September 2021)
- Engineering Software Sustainability (Deadline: 15 September 2021)
- Building-Integrated Vegetation Systems for Sustainable Cities (Deadline: 15 September 2021)
- Sustainability in Emergent Systems (Deadline: 20 September 2021)
- Transport Systems for Sustainability: Policy, Planning and Exploitation (Deadline: 30 September 2021)
- Industrial Internet of Things (IIoTs) and Industry 4.0 (Deadline: 30 September 2021)
- Low Carbon Technologies and Sustainability (Deadline: 30 September 2021)
- Sustainable Assessment in Supply Chain and Infrastructure Management (Deadline: 30 September 2021)
- The Role of Digitalization and Industry 4.0 Technologies for Product and Production Development in the Manufacturing Industry (Deadline: 30 September 2021)
- Sustainable Strategies to Overcome Bottlenecks in the Microalgal Process Chain (Deadline: 30 September 2021)
- Tacit knowledge models to support sustainable manufacturing processes according to industry 4.0 trends (Deadline: 30 September 2021)
- Sustainability in Innovative Nuclear Fission/Fusion Systems and Related Fuel Cycles (Deadline: 30 September 2021)
- Data-Driven Development for Sustainable Smart Product-Service Systems (Deadline: 30 September 2021)
- Green Engineering: Green Composite Material and Biodiesel from Wastes (Deadline: 30 September 2021)
- Transition towards Sustainable Urban Settlements (Deadline: 30 September 2021)
- Application of the Latest Data Mining Technology for Sustainability (Deadline: 30 September 2021)
- Sustainable Pavement Engineering and Road Materials (Deadline: 30 September 2021)
- Control Methods to Improve the Sustainability and Energy Efficiency of 5G and Optical Networks (Deadline: 30 September 2021)
- Sustainability and Equity in Traffic and Transportation Management and Planning: Application and Optimization Perspectives (Deadline: 30 September 2021)
- Setting Resilience Function in the Supply Chain Networks (Deadline: 30 September 2021)
- Net Zero Energy Buildings (NZEBs): Concepts, Frameworks and Sustainability (Deadline: 30 September 2021)
- Sustainable and Collaborative Smart Manufacturing and Logistics (Deadline: 30 September 2021)
- Integration of Building Information Modelling (BIM) into Facility Management: towards Sustainability (Deadline: 30 September 2021)
- Sustainability in Geotechnics: The Use of Environmentally Friendly Materials (Deadline: 30 September 2021)
- Sustainable Mobility and Energy Conservation (Deadline: 14 October 2021)
- Sustainable Technologies for Net Zero Energy Buildings (NZEB) (Deadline: 15 October 2021)
- Project Management and Control for Sustainability (Deadline: 15 October 2021)
- Electric Power Systems towards Sustainability (Deadline: 15 October 2021)
- Intelligent Control for Cyber-Physical Systems in Industry 4.0: How Digital Twins Can Improve Efficiency? (Deadline: 15 October 2021)
- Agricultural Water Management and Irrigation Systems Assessment (Deadline: 20 October 2021)
- Sustainable Building and Sustainable Indoor Environment (Deadline: 31 October 2021)
- Sustainable Mobility within the Context of Spatial Connectivity: Geography, Networks, and Economy (Deadline: 31 October 2021)
- Sustainable Design in Advanced Manufacturing (Deadline: 31 October 2021)
- Sustainable Use of Water and Energy Resources in Infrastructure (Deadline: 31 October 2021)
- Sustainable Food Waste Valorisation by Membrane Technology (Deadline: 31 October 2021)
- Synthesis, Design and Environmental Impact of Green Materials (Deadline: 31 October 2021)
- Energy Engineering for Effective Pathways towards Green and Sustainable Global Demand (Deadline: 31 October 2021)
- Sustainable Transportation Infrastructure for Achieving the UN Sustainable Development Goals (Deadline: 31 October 2021)
- Sustainable Assessment and Modelling in Seismic Risk Mitigation (Deadline: 31 October 2021)
- The Future of Facilities Management and Sustainable Development (Deadline: 31 October 2021)
- Sustainable Transport Planning under Conditions of Uncertainty (Deadline: 31 October 2021)
- Sustainable Pavement Materials and Technology (Deadline: 31 October 2021)
- Renewable Energy Production and Distribution for a Sustainable Future: Models and Strategy (Deadline: 31 October 2021)
- Environmental Management in Materials Science and Engineering for Sustainability (Deadline: 31 October 2021)
- Land Cover and Land Cover Change Monitoring (Deadline: 31 October 2021)
- Structural Health Monitoring in Civil Infrastructure (Deadline: 31 October 2021)
- Sustainable Product Design and Development (Deadline: 31 October 2021)
- Sustainable Energy Conversion Processes, Environment and Buildings and Urban Network (Deadline: 31 October 2021)
- Granular Materials and Sustainable Industrial Processes (Deadline: 31 October 2021)
- The Sustainability of Social Media Research (Deadline: 1 November 2021)
- Advances in Building Adaptive Re-design and Retrofit for Sustainable, Resilient Property (Deadline: 4 November 2021)
- Sustainability in Industrial Design Engineering for Industry 4.0 (Deadline: 5 November 2021)
- Reinforced Concrete Structures, Seismic Reliability and Sustainability (Deadline: 15 November 2021)
- Sustainable Chemical Engineering: Adsorption and Water Disinfection (Deadline: 15 November 2021)
- Innovative Materials and Structural Optimization for Resilient Infrastructure (Deadline: 15 November 2021)
- Advances in Structural Reliability Analysis and Maintenance Management (Deadline: 28 November 2021)
- Failures and Perspectives of Technological Applications and Processes after the COVID19. Defense and Development of Methodologies (Deadline: 30 November 2021)
- Life Cycle Assessment of Modern Mobility (Technologies) – Managing the Turnaround (Deadline: 30 November 2021)
- Sustainable Life Cycle Assessment of Pavements (Deadline: 30 November 2021)
- Modeling and Simulation Formalisms, Methods, and Tools for Digital-Twin-Driven Engineering and Sustainability-Led Management of Complex Systems (Deadline: 30 November 2021)
- Sustainable Intelligent Manufacturing and Logistics Systems (Deadline: 30 November 2021)
- Sustainable Wastewater Management and Treatment (Deadline: 30 November 2021)
- Life Cycle Assessment in Materials Engineering and Sustainability (Deadline: 30 November 2021)
- Integration of BIM and ICT for Sustainable Building Projects (Deadline: 30 November 2021)
- Sustainable Building Energy Analysis (Deadline: 30 November 2021)
- Mechatronics Technology and Transportation Sustainability (Deadline: 30 November 2021)
- Legislation and Post Disaster Reconstruction (Deadline: 30 November 2021)
- Environmentally Sustainable Design and Product Development (Deadline: 30 November 2021)
- Sustainability of Additive Manufacturing and 3D-Printed Parts (Deadline: 30 November 2021)
- Next Steps for Governance of Sustainable Mobility Innovations (Deadline: 30 November 2021)
- The OpenBIM Approach to Compliant Design of the Built Environment and Sustainability (Deadline: 30 November 2021)
- Design and Development of Sustainable Wastewater and Sludge Treatment and Engineering Process (Deadline: 30 November 2021)
- Sustainability and Innovation in Transport Infrastructure Geotechnics (Deadline: 30 November 2021)
- Optimal Design, Operation, and Management for Sustainable Water Distribution Systems (Deadline: 30 November 2021)
- Sustainable Civil Engineering: Seismic Performance Analysis of Structures (Deadline: 1 December 2021)
- Innovation and Governance in the Global Energy Transition (Deadline: 1 December 2021)
- Leisure Travel, Well-being, and Climate Change (Deadline: 15 December 2021)
- Quality as Driver for Sustainable Construction (Deadline: 15 December 2021)
- Innovation for Sustainable Water, Sanitation, and Hygiene (WASH) Services in Rural Areas (Deadline: 23 December 2021)
- Structural Sensing and Sustainable Infrastructure Maintenance (Deadline: 29 December 2021)
- Advances in Rock Mechanics and Geotechnical Engineering (Deadline: 30 December 2021)
- Future-Oriented LCA: Current Practice, Emerging Topics and Innovative Approaches (Deadline: 30 December 2021)
- Safety Role and Contribution to Industrial Sustainability (Deadline: 31 December 2021)
- Sustainable Use of Chemicals and Materials in Agriculture Practice (Deadline: 31 December 2021)
- Diagnostics and Nondestructive Testing as an Important Factor of Sustainability (Deadline: 31 December 2021)
- Evaluation and Application of Sustainable Engineering Materials (Deadline: 31 December 2021)
- Sustainable Innovative Solutions for Material Efficient Buildings (Deadline: 31 December 2021)
- Advances in Sustainable Wastewater Treatment Technologies (Deadline: 31 December 2021)
- The Sustainable Composite Materials in Civil and Architectural Engineering (Deadline: 31 December 2021)
- Organic Waste Management to Promote the Recycling System (Deadline: 31 December 2021)
- Sustainable Human-Computer Interaction and Engineering (Deadline: 31 December 2021)
- Sustainable Building Retrofit and Energy Optimization (Deadline: 31 December 2021)
- Human and Organizational Factors in Complex Systems (Deadline: 31 December 2021)
- Composite Materials for Sustainable Strengthening of Masonry Structures (Deadline: 31 December 2021)
- BIM-Based Life Cycle Sustainability Assessment for Buildings (Deadline: 31 December 2021)
- Sustainable Design Education and Implementation (Deadline: 31 December 2021)
- Sustainability Assessment of Architecture, Construction, Refurbishment and Restoration (Deadline: 31 December 2021)
- Ecosystem-Based Climate Change Mitigation in Wider Sustainability (Deadline: 31 December 2021)
- Targeting Environmental Challenges Using Interactive Visual Technology (Deadline: 31 December 2021)
- Heat Transfer Processing Technologies for Sustainable Thermal Engineering (Deadline: 31 December 2021)
- Sustainable Manufacturing Processes and Machine Tool Technology (Deadline: 31 December 2021)
- Sustainability of Photovoltaics (Deadline: 31 December 2021)
- Sustainable and Agile Manufacturing in the Era of Industry 4.0: Application of Simulation, Optimization, Lean, and Emerging Digital Technologies (Deadline: 31 December 2021)
- Risk Management Trends in Project-Based Organizations (Deadline: 31 December 2021)
- Design of Architectural Sustainable Lighting (Deadline: 31 December 2021)
- Computational Intelligence for Sustainable Development (Deadline: 31 December 2021)
- Environment, Energy and Sustainable Development (Deadline: 31 December 2021)
- Advances in Construction Performance Prediction Techniques: Perspectives for Sustainability (Deadline: 31 December 2021)
- Sustainable Construction and Development (Deadline: 31 December 2021)
- Towards Sustainable Built Environment: Trending Methods and Practices (Deadline: 31 December 2021)
- Reliability and Optimization for Engineering Design (Deadline: 31 December 2021)
- Sustainable Design of Foundations and Substructures (Deadline: 31 December 2021)
- Public-private Partnerships for Sustainable Infrastructure Development (Deadline: 31 December 2021)
- Financing for Sustainable Infrastructure (Deadline: 31 December 2021)
- Sustainable Construction Materials and Construction Technology (Deadline: 31 December 2021)
- Sustainable Civil Engineering: Reliability and Resilience of Infrastructures (Deadline: 31 December 2021)
- Durability and Sustainability of Concrete Materials and Reinforced Concrete Structures (Deadline: 31 December 2021)
- Sustainability and Eco-innovations in Mechanical Processing Systems of Materials: Comminution, Agglomeration, Recycling (Deadline: 31 December 2021)
- Energy-Efficient Computing Systems for Deep Learning (Deadline: 31 December 2021)
- ICT for Environmental, Social, and Economic Sustainability (Deadline: 31 December 2021)
- Eco-Construction for Sustainable Development (Deadline: 31 December 2021)
- Sustainable Growth in Engineering and Technology Management (Deadline: 31 December 2021)
- Sustainable Variable Speed Drives: Power Electronics Topologies, Monitoring, Operation and Control (Deadline: 31 December 2021)
- Project Management for Sustainable Construction (Deadline: 1 January 2022)
- Blockchain for Urban Planning, Architectural Engineering and Construction & Facility Management (UPAEC/FM) (Deadline: 12 January 2022)
- Sustainable Hydraulic Fracturing (Deadline: 15 January 2022)
- Geotechnical Engineering towards Sustainability (Deadline: 20 January 2022)
- Construction Structure Health Monitoring for Sustainable Built Environment (Deadline: 28 January 2022)
- Architectural, Civil, and Infrastructure Engineering in View of Sustainability (Deadline: 30 January 2022)
- Heat Transfer Enhancement in Renewable Energy and Emerging Technologies (Deadline: 31 January 2022)
- Emergent Paradigms and Technologies for Smart and Autonomous Vehicles (Deadline: 31 January 2022)
- Building Design Projects for Sustainable Architecture (Deadline: 31 January 2022)
- Real-Time Air Quality Monitoring Systems (Deadline: 31 January 2022)
- Sustainable Food Production and Consumption (Deadline: 31 January 2022)
- Nature-Based Solutions as Sustainable Engineering for Improving Water Security (Deadline: 31 January 2022)
- Re-Designing Existing and New Cities to Be Healthy, Liveable and Achieve Net Zero Emissions (Deadline: 31 January 2022)
- Circular Economy Approaches for Lifecycles of Products and Services (Deadline: 31 January 2022)
- Sustainability and Industry 4.0 in Civil and Infrastructure Engineering (Deadline: 10 February 2022)
- Anaerobic Digestion Processes for Wastewater Treatment in Sustainability (Deadline: 15 February 2022)
- Sustainability of Online Communities and Online Communities for Sustainability (Deadline: 20 February 2022)
- Reliable and Resilient Infrastructures for Sustainable Transport Systems (Deadline: 24 February 2022)
- Sustainable Manufacturing Management (Deadline: 28 February 2022)
- Nature-based Solutions in Geo-environmental Engineering (Deadline: 28 February 2022)
- EcoDesign: The Importance of Manufacturing Sustainable Products (Deadline: 28 February 2022)
- The New Generation of Concrete: Use of Eco-Efficient Aggregates, Binders and Water (Deadline: 28 February 2022)
- Happiness and Quality of Life in a Sustainable Built Environment (Deadline: 10 March 2022)
- Implementing Innovative and Modern Methods of Construction for Achieving Triple-Bottom-Line of Sustainability (Deadline: 14 March 2022)
- Sustainable Power System Planning and Analysis (Deadline: 15 March 2022)
- Industry 4.0 Technologies for Sustainable Asset Life Cycle Management (Deadline: 15 March 2022)
- Sustainability and Engineering Design (Deadline: 18 March 2022)
- Sustainable Food Marketing and Supply Chain Organization (Deadline: 30 March 2022)
- Lean Manufacturing Strategies and Energy Management for Industry 4.0 (Deadline: 31 March 2022)
- Artificial Intelligence Applications in Material Diagnostics and Technology for Sustainability (Deadline: 31 March 2022)
- Green Technology and Renewable Energy Projects (Deadline: 31 March 2022)
- Research of Renewable Materials and Biological Products: towards Sustainability (Deadline: 31 March 2022)
- Operations and Technology Management in Sustainable Manufacturing (Deadline: 31 March 2022)
- Rethinking Social Sustainable Construction Practices (Deadline: 31 March 2022)
- Sustainability and Industry 4.0: New Perspectives of Industry 4.0 Realization in Sustainability Context (Deadline: 31 March 2022)
- Nano-Engineered Concrete for Smart and Sustainable Structures (Deadline: 31 March 2022)
- Design to Drive Behavior Change for Sustainability and Circular Economy (Deadline: 31 March 2022)
- Anaerobic Environmental Biotechnology and Sustainability (Deadline: 31 March 2022)
- Sustainability and Green Construction (Deadline: 31 March 2022)
- Sustainability in Construction Management (Deadline: 13 April 2022)
- Life Cycle Assessment and Water Footprint Assessment in Support of Achieving the SDGs (Deadline: 15 April 2022)
- Sustainable Mobilities, Spatial Planning and Urban Livability (Deadline: 29 April 2022)
- Sustainable Offshore and Ocean Engineering Applications: Computational Hydrodynamics and Aerodynamics (Deadline: 30 April 2022)
- Digital Transformation in the Transport Sector: A Sustainable Approach (Deadline: 1 May 2022)
- Tire Derived Aggregate for Sustainable Construction (Deadline: 12 May 2022)
- Remote Sensing Applications in Environmental Pollution Monitoring for Sustainable Development (Deadline: 31 May 2022)
- System Engineering Development and Sustainability Applications (Deadline: 31 May 2022)
- Construction Project and Management in Smart Cities (Deadline: 31 May 2022)
- Software Engineering Development and Applications for Sustainability (Deadline: 30 June 2022)
- Architecture, Energy, Landscape, and Optimization (Deadline: 30 July 2022)
- Structural Health Monitoring for a Sustainable Built Environment (Deadline: 18 August 2022)
- Digitization and Sustainability in Construction (Deadline: 30 August 2022)
- Machine Learning, Data Mining, and IoT Applications in Smart and Sustainable Networks (Deadline: 31 August 2022)
- Building Sustainable Industry 4.0: Efficiency, Effectiveness, Evaluation, Development Frameworks (Deadline: 31 August 2022)
- Energy Efficient Domestic Appliances and Smart Lighting Technologies (Deadline: 30 September 2022)
- Sustainable Construction Materials for Circular Economy (Deadline: 31 December 2022)
- Creativity and Innovative Technologies in Product Design and Development (Deadline: 9 June 2023)
- Current Issues in Human-Powered Electric Hybrid Vehicles: Dynamics, Control and Management (Deadline: 30 June 2023)
- Advances in Manufacturing Sustainability in the Industry 4.0 Era (Deadline: 31 July 2023)
Topical Collection
Following topical collection within this section is currently open for submissions: