Skip to Content

4,142 Results Found

  • Article
  • Open Access
7 Citations
4,185 Views
15 Pages

An Experimental Study on Heat Recovery Performances of Three-Dimensional Heat Pipes in Air-Conditioning Systems

  • Yanqiang Di,
  • Haiyan Di,
  • Chen Zhao,
  • Zichen Lu and ,
  • Xiaona Li and
  • Juan Leng
  • + 1 author+ 0 author

27 January 2024

The applications of conventional heat pipes have been hindered by a few weaknesses, such as the low heat recovery effectiveness, the cross-pollution of fresh and exhaust air, and the difficult switch modes between winter and summer working conditions...

(This article belongs to the Special Issue Research on Energy Performance in Buildings)
  • Article
  • Open Access
786 Views
18 Pages

Study on the Preparation and Application of Channel-Type High-Efficiency Filter Paper

  • Mingyu Li,
  • Desheng Wang,
  • Lingyun Wang,
  • Yuhan Wang and ,
  • Jinhao Xie,
  • Yun Liang,
  • Jian Kang and
  • Hao Wang
  • + 3 authors+ 0 author

5 May 2026

Air pollution has drawn increasing attention. The channel-type structure, as an ideal energy-saving and resistance-reducing strategy for air filters, can effectively lower filtration resistance. However, current commercial channel-type filters genera...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
28 Citations
4,251 Views
9 Pages

11 August 2019

A molten-salt and microwave co-facilitated boro/carbothermal reduction methodology was developed for low temperature high-efficiency synthesis of TiB2 powders. By using relatively inexpensive titanium oxide (TiO2), boron carbide (B4C) and amorphous c...

(This article belongs to the Special Issue High Temperature Ceramic Materials)
  • Article
  • Open Access
43 Citations
4,849 Views
17 Pages

30 May 2019

A parallel hybrid electric vehicle (PHEV) is used to investigate the fuel economy effect of the equivalent fuel consumption minimization strategy (ECMS) with the equivalent factor as the core, where the equivalent factor is the conversion coefficient...

  • Article
  • Open Access
38 Citations
5,752 Views
17 Pages

This paper presents the engineering geological properties and roof control tecnology for a thick coal seam fully-mechanized face mining with hard roof conditions (THC) at the Jinhuagong Coal Mine (JCM), northwest China. The effective support working...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
1 Citations
2,428 Views
17 Pages

Transverse Scaling of Schottky Barrier Charge-Trapping Cells for Energy-Efficient Applications

  • Hung-Jin Teng,
  • Yu-Hsuan Chen,
  • Jr-Jie Tsai,
  • Nguyen Dang Chien and ,
  • Chenhsin Lien and
  • Chun-Hsing Shih
  • + 1 author+ 0 author

13 November 2020

This work numerically elucidates the effects of transverse scaling on Schottky barrier charge-trapping cells for energy-efficient applications. Together with the scaled gate structures and charge-trapping dielectrics, variations in bias conditions on...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Review
  • Open Access
24 Citations
9,960 Views
32 Pages

19 February 2024

The utilization and development of biomass resources is an efficient solution to mitigate the fossil energy crisis. Based on the advantages of mild reaction conditions, rapid reaction, and high conversion, the synthesis of 2,5-furandicarboxylic acid...

(This article belongs to the Section Catalysis in Organic and Polymer Chemistry)
  • Article
  • Open Access
8 Citations
2,302 Views
16 Pages

Effects of Different Nitrogen Fertilizer Rates on Spring Maize Yield and Soil Nitrogen Balance Under Straw Returning Conditions of Cold Regions

  • Jinghong Ji,
  • Shuangquan Liu,
  • Xiaoyu Hao,
  • Yu Zheng and ,
  • Yue Zhao,
  • Yuqi Xia,
  • Zhanqiang Xing and
  • Wei Guo
  • + 3 authors+ 0 author

7 October 2025

Under the condition of straw returning to the field, appropriate nitrogen fertilizer application is one of the key factors used to improve crop yield and ensure environmental safety. Therefore, an experiment with different rates of nitrogen fertiliza...

(This article belongs to the Special Issue Management of Soil Fertility and Plant Nutrition for Improved Crop Production)
  • Article
  • Open Access
6 Citations
4,875 Views
13 Pages

Performance Comparison of High-Temperature Heat Pumps with Different Vapor Refrigerant Injection Techniques

  • Yuqiang Yang,
  • Yu Wang,
  • Zhaoyang Xu,
  • Baojiang Xie and ,
  • Yong Hu,
  • Jiatao Yu,
  • Yehong Chen,
  • Ting Zhang,
  • Zhenneng Lu and
  • Yulie Gong
  • + 5 authors+ 0 author

13 March 2024

In order to develop a highly efficient and stable high-temperature heat pump to realize high-efficient electrification in the industrial sector, performance of high-temperature heat pumps with a flash tank vapor injection and sub-cooler vapor injecti...

(This article belongs to the Special Issue Smart Wearable Technology: Thermal Management and Energy Applications)
  • Article
  • Open Access
8 Citations
2,808 Views
12 Pages

Transient Magnetic Properties of Non-Grain Oriented Silicon Steel under Multi-Physics Field

  • Anqi Wang,
  • Baozhi Tian,
  • Yulin Li,
  • Shibo Xu and ,
  • Lubin Zeng and
  • Ruilin Pei
  • + 1 author+ 0 author

23 November 2022

High-speed, high-efficiency and high-power density are the main development trends of high-performance motors in the future. At present, the design accuracy of traditional electric machines is already high enough; however, for the future demand of hi...

(This article belongs to the Special Issue Soft Magnetic Materials and Their Application)
  • Article
  • Open Access
15 Citations
4,202 Views
14 Pages

Performance and Stability of Wet-Milled CoAl2O4, Ni/CoAl2O4, and Pt,Ni/CoAl2O4 for Soot Combustion

  • Carmen M. Álvarez-Docio,
  • Raquel Portela,
  • Julián J. Reinosa,
  • Fernando Rubio-Marcos and ,
  • Laura Pascual and
  • José F. Fernández
  • + 1 author+ 0 author

8 April 2020

Low-energy wet milling was employed to activate commercial CoAl2O4 spinel and disperse mono- and multimetallic nanoparticles on its surface. This method yielded efficient Pt,Ni catalysts for soot oxidation in simulated diesel exhaust conditions. The...

  • Article
  • Open Access
5 Citations
2,779 Views
15 Pages

1 October 2022

In this work, a proposed high-efficiency and low-cost photovoltaic water-pumping system based on semitransparent dye-sensitized solar cells (DSSCs) is presented. DSSCs are low-cost third-generation photovoltaics that have gained a lot of interest as...

(This article belongs to the Special Issue Renewable Energy Power Plants and Systems)
  • Proceeding Paper
  • Open Access
188 Views
8 Pages

8 September 2026

This article proposes a methodology for rapid measurement of corrosion growth in drill rods. Oil and gas production in real field conditions is associated with frequent interruptions, measurements, failures, and, above all, high risk. Usually, method...

(This article belongs to the Proceedings of The International Conference on Electronics, Engineering Physics and Earth Science (EEPES2026))
  • Article
  • Open Access
7 Citations
4,311 Views
18 Pages

14 May 2023

With the increasing pressure on energy and the environment, vehicle brake energy recovery technology is increasingly focused on reducing energy consumption effectively. Based on the magnetization effect of permanent magnets, this paper presents a nov...

(This article belongs to the Section Energy Science and Technology)
  • Article
  • Open Access
11 Citations
4,510 Views
13 Pages

19 July 2020

Electrochemical ammonia synthesis, which is an alternative approach to the Haber–Bosch process, has attracted the attention of researchers because of its advantages including mild working conditions, environmental protection, and simple process. Howe...

(This article belongs to the Section Electrocatalysis)
  • Article
  • Open Access
14 Citations
3,639 Views
13 Pages

10 February 2023

This work presents a high-efficiency reconfigurable wireless-power-transfer (WPT) system using fully rollable Tx/Rx coils and a metasurface (MS) screen working at 6.78 MHz, for the first time. The MS screens are placed between the Tx and Rx to magnif...

(This article belongs to the Special Issue Energy Harvesting Technologies and Applications for the Internet of Things and Wireless Sensor Networks (Volume II))
  • Perspective
  • Open Access
74 Citations
13,935 Views
19 Pages

Development Trend of Cooling Technology for Turbine Blades at Super-High Temperature of above 2000 K

  • Liang Xu,
  • Zineng Sun,
  • Qicheng Ruan,
  • Lei Xi and ,
  • Jianmin Gao and
  • Yunlong Li
  • + 1 author+ 0 author

5 January 2023

Aeroengines and heavy-duty gas turbines are the core power equipment in the field of national defense and energy. Their research and development (R&D) level and manufacturing level represent the status of a country’s heavy industry in the world....

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
4 Citations
4,712 Views
19 Pages

Development of Ultra-High-Efficiency Medium-Capacity Chillers with Two-Stage Compression and Interstage Vapor Injection Technologies

  • Zhiping Zhang,
  • Hongye Qiu,
  • Dantong Li,
  • Zhilong He and ,
  • Ziwen Xing and
  • Lijian Wu
  • + 1 author+ 0 author

16 December 2022

Chillers are widely used in commercial buildings for air conditioning, and their energy consumption is the main contribution to the building’s carbon emissions. Currently, the COPs of small- and medium-capacity screw chillers are still generall...

  • Article
  • Open Access
2 Citations
2,022 Views
15 Pages

Construction and Properties of Wood-Based Tannin–Iron-Complexed Photothermal Material Populus tomentosa Carr.@Fe-GA for Solar Seawater Desalination System

  • Hongyan Zhu,
  • Xinyu Li,
  • Shijie Li,
  • Ximing Wang and ,
  • Yabo Ma,
  • Jin Zhang,
  • Yunpeng Ren and
  • Jianguo Zhao
  • + 3 authors+ 0 author

16 January 2025

Desalinating seawater is a crucial method for addressing the shortage of freshwater resources. High-efficiency, low-cost, and environmentally friendly desalination technologies are key issues that urgently need to be addressed. This work used Populus...

  • Article
  • Open Access
277 Views
19 Pages

Non-Traditional Design and Experimental Validation of a Central-Tapped MFT for High-Efficiency DC-DC CT-PSFB Converters

  • Jorge Ortíz-Marín,
  • Guillermo Adolfo Anaya-Ruiz,
  • Gilberto Alejandro Herrejón-Pintor,
  • Vicente Venegas-Rebollar and
  • Edgar L. Moreno-Goytia

Current applications in photovoltaic power generation and energy storage require isolated, efficient, and reliable DC-DC converter topologies. However, the design of the nanocrystalline-core medium-frequency transformer (MFT), as a key element of the...

(This article belongs to the Section Electrical Technologies)
  • Review
  • Open Access
10 Citations
3,477 Views
17 Pages

With the fast development of magnetic coupling resonant-dynamic wireless power transfer (MCR-DWPT), it is more likely that high-efficiency wireless charging between unmanned ground vehicles (UGVs) will be practically realized, especially in desolate...

(This article belongs to the Topic Advanced Wireless Charging Technology)
  • Article
  • Open Access
1 Citations
2,439 Views
17 Pages

An Analysis of Energy and Internal Flow Characteristics of Open Inlet Channel Axial Flow Pumping Devices

  • Chuanliu Xie,
  • Cheng Zhang,
  • Tenglong Fu,
  • Andong Feng and ,
  • Tao Zhang and
  • Fan Yang
  • + 1 author+ 0 author

4 November 2022

For the purpose of studying the dynamic and inner flow features of an open inlet channel axial flow pump unit, in the present study, numerical calculations using the SST k-ω turbulence model are applied to an open inlet channel axial flow pumpi...

(This article belongs to the Topic Latest Developments in Fluid Mechanics and Energy)
  • Article
  • Open Access
3 Citations
2,812 Views
9 Pages

Personal Thermal Management by Single-Walled Carbon Nanotubes Functionalized Polyester Fabrics

  • Liyuan Guan,
  • Zhong Wang,
  • Mingxing Wang,
  • Yangjinghua Yu and ,
  • Wenjian He,
  • Ning Qi and
  • Guohe Wang
  • + 2 authors+ 0 author

17 August 2021

In this work, a personal thermal management (PTM) device based on single walled carbon nanotubes (SWCNTs) functionalized polyester fabrics had been studied. Polyester fabrics were functionalized with SWCNTs through coating method with poly (butyl acr...

  • Article
  • Open Access
5 Citations
1,037 Views
17 Pages

24 July 2025

Aiming at the problems of low thermal analysis efficiency and high computational cost of traditional computational fluid dynamics (CFD) methods for modular fault-tolerant permanent magnet synchronous motors (MFT-PMSMs) under complex working condition...

(This article belongs to the Special Issue Linear/Planar Motors and Other Special Motors)
  • Article
  • Open Access
16 Citations
5,796 Views
19 Pages

A Comparative Study on p- and n-Type Silicon Heterojunction Solar Cells by AFORS-HET

  • Wabel Mohammed Alkharasani,
  • Nowshad Amin,
  • Seyed Ahmad Shahahmadi,
  • Ammar Ahmed Alkahtani and ,
  • Ili Salwani Mohamad,
  • Puvaneswaran Chelvanathan and
  • Tiong Sieh Kiong
  • + 2 authors+ 0 author

13 May 2022

Despite the increasing trend of n-type silicon wafer utilization in the manufacturing of high-efficiency heterojunction solar cells due to the superior advantages over p-type counterparts, its high manufacturing cost remains to be one of the most cru...

(This article belongs to the Topic Nanomaterials for Sustainable Energy Applications)
  • Article
  • Open Access
1,204 Views
19 Pages

18 February 2025

To address the inadequacies of traditional Advanced Orbiting Systems (AOS) multiplexing algorithms in accommodating the networked and diverse transmission demands of space data, this paper proposes an efficient network AOS integrated multiplexing alg...

(This article belongs to the Section Astronautics & Space Science)
  • Article
  • Open Access
3 Citations
4,281 Views
18 Pages

2 April 2020

Facing the future, whether working alone or with electric motors, a new type of variable compression ratio (VCR) engine that can achieve a high thermal efficiency under heavy load conditions is necessary. Hence, we propose a dual shaft control variab...

  • Article
  • Open Access
3 Citations
1,981 Views
21 Pages

17 March 2025

In this work, by using the sintering filtrated dust (SFD) from ferrous metallurgy as a raw material, the process of separating and recovering trace silver, including the steps of complexation leaching by Na2S2O3-CuCl, purification by hydrogen peroxid...

(This article belongs to the Special Issue Advances in the Recycling of Industrial Waste: Critical Minerals in the Clean Energy Transition)
  • Article
  • Open Access
5 Citations
5,018 Views
20 Pages

10 April 2023

In the wake of countries competing to develop high-efficiency offensive weapons, high-precision systems have also developed. Due to the high speed and high maneuverability of hypersonic targets, it is always difficult to meet the accuracy and rapidit...

(This article belongs to the Special Issue Advanced Guidance and Control of Hypersonic Vehicles)
  • Article
  • Open Access
2 Citations
1,200 Views
17 Pages

Effects of Na and Na/CO2 Synergism on Gas/Tar Production During Rapid Coal Pyrolysis

  • Feng Wang,
  • Rui Ma,
  • Bo Wei,
  • Shuanglong Li and ,
  • Liqing Guo and
  • Qianjin Lin
  • + 1 author+ 0 author

22 October 2025

Coal pyrolysis and gasification are among the key technologies for the clean and efficient utilization of coal. This work examined the individual and synergistic effects of Na and CO2 on gas/tar generation during rapid coal pyrolysis using a fixed-be...

  • Article
  • Open Access
2 Citations
3,207 Views
13 Pages

PN Junction Optimization for High-Speed Silicon Photonic Modulators

  • Mahmoud Hamouda,
  • Carine Mankarious,
  • Aser El-Dahshan,
  • Alaa Fathy and ,
  • Eslam El-Fiky and
  • Diaa Khalil
  • + 1 author+ 0 author

31 October 2025

PN-junction-based modulators are widely used in silicon photonic transceivers for different applications. Different junction shapes have been proposed in the literature. This work studies the optimization of the PN junction by tailoring the doping pr...

(This article belongs to the Special Issue Recent Advancement in Microwave Photonics)
  • Article
  • Open Access
20 Citations
3,819 Views
22 Pages

7 November 2022

In order to widen the range of high-efficiency area of a high-specific-speed axial flow pump and to improve the operating efficiency under non-design conditions, the parameters of the axial flow pump blades were optimized. An optimization system base...

(This article belongs to the Special Issue Optimization and Flow Characteristics in Advanced Fluid Machinery)
  • Article
  • Open Access
5 Citations
2,595 Views
18 Pages

14 June 2024

Cities with sloping terrain are more susceptible to flooding during heavy rains. Traditional hydraulic models struggle to meet computational demands when addressing such emergencies. This study presented an integration of the one-dimensional Storm Wa...

(This article belongs to the Section Urban Water Management)
  • Article
  • Open Access
3 Citations
1,665 Views
25 Pages

Research on Energy Saving for Hybrid Tractor Based on Working Condition Prediction and DDPG-Fuzzy Control

  • Shilong Fan,
  • Xianghai Yan,
  • Shuaishuai Ge,
  • Junjiang Zhang and
  • Mengnan Liu

To significantly reduce fuel consumption and improve fuel economy in hybrid tractor under complex working conditions, an energy—saving strategy based on working condition prediction and Deep Deterministic Policy Gradient and Fuzzy control (DDPG...

  • Feature Paper
  • Article
  • Open Access
1 Citations
790 Views
20 Pages

Towards 50% Efficiency in Opposed Free-Piston Linear Generators Operating with Natural Gas and HCCI Combustion

  • Giovanni Gaetano Gianetti,
  • Nicola Morandi,
  • Tommaso Lucchini,
  • Matteo Ferrarini and
  • Angelo Onorati

14 June 2026

Internal combustion engines are a well-established, efficient and dispatchable solution for distributed power generation and they are widely used in various sectors including grid balancing, data centers and combined heat and power systems. Current r...

(This article belongs to the Special Issue Computational and Data-Driven Modeling of Combustion in Reciprocating Engines or Gas Turbines, 3rd Edition)
  • Feature Paper
  • Article
  • Open Access
4 Citations
1,692 Views
36 Pages

Enhancing s-CO2 Brayton Power Cycle Efficiency in Cold Ambient Conditions Through Working Fluid Blends

  • Paul Tafur-Escanta,
  • Luis Coco-Enríquez,
  • Robert Valencia-Chapi and
  • Javier Muñoz-Antón

11 July 2025

Supercritical carbon dioxide (s-CO2) Brayton cycles have emerged as a promising technology for high-efficiency power generation, owing to their compact architecture and favorable thermophysical properties. However, their performance degrades signific...

(This article belongs to the Section Thermodynamics)
  • Article
  • Open Access
10 Citations
3,212 Views
11 Pages

High-Efficiency Separation of Mg2+/Sr2+ through a NF Membrane under Electric Field

  • Huan Liu,
  • Quan Li,
  • Benqiao He,
  • Zhengguang Sun and ,
  • Feng Yan,
  • Zhenyu Cui and
  • Jianxin Li
  • + 2 authors+ 0 author

31 December 2021

The efficient separation of Sr2+/Mg2+ through nanofiltration (NF) technology is a great challenge because Sr2+ and Mg2+ ions are congeners with the same valence and chemical properties. In this work, an NF membrane under an electric field (EF) was su...

(This article belongs to the Special Issue Ion-Selective Separation Membrane)
  • Article
  • Open Access
9 Citations
2,783 Views
13 Pages

8 July 2021

TiO2 is popular in photocatalytic degradation dye pollutants due to its abundance and its stability under photochemical conditions. Au loaded TiO2 can achieve efficient absorption of visible light and deal with the problem of low conversion efficienc...

  • Article
  • Open Access
25 Citations
4,169 Views
23 Pages

Energy-Saving Control of Hybrid Tractors Based on Instantaneous Optimization

  • Junjiang Zhang,
  • Ganghui Feng,
  • Liyou Xu,
  • Xianghai Yan and ,
  • Wei Wang and
  • Mengnan Liu
  • + 1 author+ 0 author

In this study, an energy-saving control strategy based on instantaneous optimization is proposed to improve the energy efficiency of hybrid tractors. Using a parallel diesel–electric hybrid tractor as the research object, the topological and wo...

(This article belongs to the Special Issue New Energy Special Vehicle, Tractor and Agricultural Machinery)
  • Article
  • Open Access
8 Citations
2,107 Views
17 Pages

23 January 2025

As one of the critical components in helicopter transmission systems, the flange is prone to fatigue damage and failure under complex operational conditions, which seriously influence operational safety and service life. To improve the structural int...

(This article belongs to the Special Issue State Monitoring and Health Management of Complex Equipment (2nd Edition))
  • Review
  • Open Access
3 Citations
825 Views
33 Pages

Lean Combustion Enhancement and Decarbonization Technologies for Natural Gas Engines

  • Zhaojie Shen,
  • Leyuan Wang,
  • Lu Han,
  • Hua Zhao and ,
  • Fuqiang Wang,
  • Guene Lougou Bachirou,
  • Emmanuel Nyankson,
  • Benjamin Agyei-Tuffour,
  • Abu Yaya and
  • Wenzheng Cui
  • + 6 authors+ 1 author

2 June 2026

This study explores key technological challenges and innovative strategies for improving the combustion performance and emission characteristics of low-carbon fuel engines, with a focus on natural gas applications. The core bottlenecks of natural gas...

(This article belongs to the Section I2: Energy and Combustion Science)
  • Article
  • Open Access
2 Citations
2,129 Views
18 Pages

Smoke Precipitation by Exposure to Dual-Frequency Ultrasonic Oscillations

  • Vladimir Khmelev,
  • Andrey Shalunov,
  • Sergey Tsyganok and
  • Pavel Danilov

15 December 2024

The analysis conducted herein has shown that the efficiency of smoke precipitation can be improved by additionally making smoke particles interact with ultrasonic (US) oscillations. Because the efficiency of US coagulation lowers when small particles...

  • Article
  • Open Access
1 Citations
1,389 Views
25 Pages

Comparative Analysis of CFD Simulations and Empirical Studies for a Heat Exchanger in a Dishwasher

  • Wojciech Skarka,
  • Maciej Mazur,
  • Damian Kądzielawa and
  • Robert Kubica

18 December 2025

This paper presents a side-by-side study of CFD predictions and experimental measurements for a novel counter-flow heat exchanger installed in the sidewall of a dishwasher (HEBS). The work aims to improve appliance efficiency by transferring heat fro...

(This article belongs to the Special Issue Computational Fluid Dynamics (CFD) Study for Heat Transfer)
  • Article
  • Open Access
2 Citations
1,441 Views
19 Pages

19 November 2025

The aircraft air-cycle system (ACS) provides cabin cooling, dehumidification, and pressurization. As a key component, the water separator removes free moisture from the air, preventing turbine icing/blockage under high humidity and avoiding humidity-...

(This article belongs to the Section Process Control, Modeling and Optimization)
  • Review
  • Open Access
83 Citations
6,323 Views
23 Pages

Recent Progress in Multifunctional Gas Sensors Based on 2D Materials

  • Zhifang Liu,
  • Zirui Qiao,
  • Chen-Yuan Li and
  • Yilin Sun

The detection of specific gas components under various working conditions while at the same time realizing other functions with the same devices has emerged through great efforts due to these devices’ superior energy-saving and high-efficiency...

(This article belongs to the Section Materials for Chemical Sensing)
  • Feature Paper
  • Article
  • Open Access
671 Views
9 Pages

Stepwise Optimization of Antisolvent Dripping and Annealing Times for High-Efficiency Inverted Perovskite Solar Cells

  • Weixuan Liu,
  • Fobao Xie,
  • Haifan Zhou,
  • Qinghua Cao and ,
  • Linkun Zhong,
  • Xiaoli Zhang and
  • Yanjun Liu
  • + 2 authors+ 0 author

The crystallization quality of a perovskite active layer is highly sensitive to processing conditions and plays a decisive role in determining the performance of perovskite solar cells (PSCs). Herein, we systematically investigate the synergistic eff...

(This article belongs to the Special Issue Surface and Interface Engineering for Photovoltaics)
  • Feature Paper
  • Article
  • Open Access
64 Citations
5,964 Views
17 Pages

Facile Synthesis of Sustainable Biomass-Derived Porous Biochars as Promising Electrode Materials for High-Performance Supercapacitor Applications

  • Ravi Moreno Araujo Pinheiro Lima,
  • Glaydson Simões dos Reis,
  • Mikael Thyrel,
  • Jose Jarib Alcaraz-Espinoza and ,
  • Sylvia H. Larsson and
  • Helinando Pequeno de Oliveira
  • + 1 author+ 0 author

Preparing sustainable and highly efficient biochars as electrodes remains a challenge for building green energy storage devices. In this study, efficient carbon electrodes for supercapacitors were prepared via a facile and sustainable single-step pyr...

  • Article
  • Open Access
3 Citations
5,488 Views
22 Pages

Multi-Objective Comparative Analysis of Active Modular Rectifier Architectures for a More Electric Aircraft

  • Unai Atutxa,
  • Igor Baraia-Etxaburu,
  • Víctor Manuel López,
  • Fernando González-Hernando and
  • Alejandro Rujas

12 February 2022

Aircraft electrification requires reliable, power-dense, high-efficient, and bidirectional rectifiers to improve the overall performance of existing aircrafts. Thus, traditional bulky passive rectifiers must be substituted by active rectifiers, satis...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
2 Citations
2,019 Views
11 Pages

Facile Synthesis of MoP and Its Composite Structure with Ru as an Efficient Electrocatalyst for Hydrogen Evolution Reaction in Both Acidic and Alkaline Conditions

  • Pinyun Ren,
  • Rui Wang,
  • Yujie Yang,
  • Tianyu Wang and ,
  • Yilun Hong,
  • Yi Zheng,
  • Qianying Zheng,
  • Xianpei Ren and
  • Zhili Jia
  • + 4 authors+ 0 author

6 March 2025

Developing low-cost electrocatalysts for efficient hydrogen evolution in both acidic and alkaline conditions is crucial for water-electrolytic hydrogen applications. Herein, MoP was synthesized via a simple, low-cost, and green phosphorization route....

  • Article
  • Open Access
1 Citations
879 Views
21 Pages

Carbon-Modified Attapulgite Composite for Rapid Rhodamine B Degradation: High Adsorption Capacity and Photo-Fenton Efficiency

  • Naveed Karim,
  • Tin Kyawoo,
  • Saeed Ahmed,
  • Weiliang Tian and ,
  • Huiyu Li and
  • Yongjun Feng
  • + 1 author+ 0 author

30 January 2026

A carbon-modified attapulgite composite (C-AATP@CTAB) was synthesized via the hydrothermal method using citric acid as the carbon source and cetyltrimethylammonium bromide (CTAB) as a surface modifier for efficient rhodamine B (Rh-B) removal. Carbon...

(This article belongs to the Topic Functionalized Materials for Environmental Applications)

of 83