Compared with electromagnetic compatibility (EMC) testing in anechoic rooms, open-area EMC testing takes advantage of in situ and engine running status measurement but suffers from non-negligible external electromagnetic interference. This paper prop...
Conducted emissions (CE) for three-phase systems are becoming an increasing concern due to the recent exponential growth of three-phase applications, especially linked to the automotive sector. The problem arises because electromagnetic compatibility...
This paper presents a study and proposes a new methodology to analyze, evaluate and reduce the overall uncertainty of instrumentations for EMC measurements. For the scope of this work, the front end of a commercial EMI receiver is chosen and variatio...
The paper deals with the susceptibility to Electromagnetic Interference (EMI) of Hall-effect current sensors. They are usually employed in power systems because of their galvanic isolation. The EMI robustness of such contactless device was compared w...
Urban stormwater has become a persistent concern on a global scale due to its adverse environmental implications. It is the prime vector of aquatic contaminants worldwide that causes pollutants when water bodies drain. Bioretention systems are increa...
Gallium Nitride (GaN) High Electron Mobility Transistors (HEMTs) are emerging as the technology of choice for next-generation power conversion systems, offering switching speeds, on-state resistance, and power density unattainable with silicon or eve...
Packaging represents an important part in the microintegration of sensors based on microelectromechanical system (MEMS). Besides miniaturization and integration density, functionality and reliability in combination with flexibility in packaging desig...
Electric vehicles (EVs) pose electromagnetic compatibility (EMC) and electromagnetic interference (EMI) challenges that span sub-hertz traction currents to multi-gigahertz radiated emissions. This paper combines a narrative review of 260 publications...
The current study aimed to quantify the length progression of enamel microcracks (EMCs) after debonding metal and ceramic brackets, implementing OCT as a diagnostic tool. The secondary objectives included a three-dimensional assessment of EMC width a...
This paper is aimed at making new proposals for developing future Electro-Magnetic Compatibility (EMC) standards tailored to DC microgrids in a frequency range between 9 and 500 kHz. In particular, new EMC proposals are made to reduce Electro-Magneti...
Electromagnetic compatibility (EMC) in nuclear power plants today mostly relies on the qualification tests of the new equipment and adhering to some good installation practices. Diversity of the electromagnetic environment and different susceptibilit...
This paper focuses on characterizing the evolution of warpage, effects of epoxy molding compound (EMC), and effects of carrier 2 (the second carrier in the process) of 12 inch RDL-first multi-die fan-out wafer-level packaging (FOWLP) during the manuf...
In this paper, the fracture of notched polymeric specimens under compressive stresses was investigated both experimentally and theoretically. In the experimental section, to determine the load-carrying capacity (LCC) of U-notched specimens made of ge...
To enhance the long-term corrosion resistance of micro-arc oxidation coatings on magnesium alloys, this study regulated the ionic composition of the electrolyte based on the solubility product rule. In the silicate system, a micro-arc oxidation coati...
The main goal of this paper is the application of the Strain Energy Density (SED) criterion and the Theory of Critical Distances (TCD), both of them in combination with the Equivalent Material Concept (EMC), to predict the fracture loads of aluminum...
The emergence and spread of antibiotic-resistant bacteria is a global threat to human health. An accurate antibiotic susceptibility test (AST) before initiating the treatment is paramount in the treatment and bacterial resistance control. However, th...
Job stress (JS) is a significant issue in the construction industry of developing countries. This study aims to examine the impact of error-management climate (EMC), safety climate (SC), and psychological capital (PC) (as a mediator) on employee JS i...
Global industries strive towards the production of materials with superior mechanical characteristics, and their development remains a big challenges. One of the more interesting materials that exhibit these properties are silicate-filled epoxy moldi...
In this work, a novel levitation magnet with damping coil is proposed to address the existing issues and improve reliability. The fault mechanism of the existing magnet is analyzed and validated using a coupling model combined with inductive voltage...
Epoxy molding compounds (EMCs) are commonly used in electronic products for chip encapsulation, but the moisture absorption of EMC can induce significant reliability challenges. In this study, the effects of hygrothermal conditions and structure para...
Electrical enabling motor control (eEmc) through transcutaneous spinal cord stimulation is a non-invasive method that can modify the functional state of the sensory-motor system. We hypothesize that eEmc delivery, together with hand training, improve...
Electrical enabling motor control (eEmc) through transcutaneous spinal cord stimulation offers promise in improving hand function. However, it is still unknown which stimulus intensity or which muscle force level could be better for this improvement....
The use of electric motorcycles (EMCs) is rapidly increasing because EMCs are comparable in price to internal combustion engine motorcycles (ICE motorcycles), can be charged at home, and do not cause pollution. However, using EMCs in residential elec...
This article presents a brief evaluation and discussion of eight proposed printed log-periodic dipole array (PLPDA) antennas that have been introduced in the last decade for EMC applications. These proposed antennas could serve as reference antennas...
In order to ensure the vehicle management system (VMS) satisfy the RE and CE standards which are required by national regulations, the EMC design method is necessary to be integrated into the controller PCB design flow. Through filtering for signal l...
Semiconductor advancements demand greater integrated circuit density, structural miniaturization, and complex material combinations, resulting in stress concentrations from property mismatches. This study investigates the failure in two types of inte...
As electric bicycles become a more common choice for sustainable urban mobility, their battery chargers must satisfy stringent electromagnetic compatibility (EMC) and electrical –safety requirements before being placed on the market. This paper...
Background: Electromagnetic compatibility (EMC) challenges in 2.5D/3D semiconductor packaging arise from the complex coupling between device, interposer, board, and cable domains, which are insufficiently captured by conventional board-level analysis...
Are the regulations relating to electromagnetic compatibility (EMC) sufficient to ensure the safety of all autonomy systems? EMC is one of the critical factors influencing the proper functioning of a vehicle and its safety. However, the safety of aut...
As the trend towards the densification of integrated circuit (IC) devices continues, the complexity of interfaces involving dissimilar materials and thermo-mechanical interactions has increased. Highly integrated systems in packages now comprise nume...
This paper presents an investigation on the influence of various factors on rolling shear (RS) properties of timber feedstock for cross laminated timber (CLT) available from Australian plantation forest resources. Comparison of RS properties between...
This paper presents a compact stacked RF energy harvester operating in the WiFi band with multi-condition adaptive energy management circuits (MCA-EMCs). The harvester is divided into antennas, impedance matching networks, rectifiers, and MCA-EMCs. T...
This study investigated the influence of variations in the mixing ratio of ethylene carbonate (EC) to ethyl methyl carbonate (EMC) on the composition and effectiveness of the solid electrolyte interphase (SEI) in lithium-metal batteries. The SEI is c...
Global design and manufacturing of the materials with superb properties remain one of the greatest challenges on the market. The future progress is orientated towards researches into the material development for the production of composites of better...
Hygroscopicity is one of the most important properties of wood and plays a decisive role in its dimensional stability. In this context, conservation plans for waterlogged archaeological wood (WAW) and relevant waterlogged artefacts must be created. T...
In multi-pole permanent magnets (PMs) such a ring-type PMs, as multi-poles are magnetized in one segment, the ends of each pole are weakly magnetized, which is known as the dead zone. Thus, when analyzing characteristics of the motor with multi-pole...
In recent years, UAV formations have garnered significant attention in fields such as reconnaissance, communications, and transportation. This paper aims to design an efficient passive localization method for UAV formations that satisfies system elec...
In this study, two types of direct interface capacitive sensors, self- and mutual-capacitance, were developed and compared experimentally. Electromagnetic Compatibility (EMC) tests—International Electrotechnical Commission (IEC) 61000-4-3, IEC 61000-...
Electronic devices and their associated sensors are exposed to increasing mechanical, thermal and chemical stress in modern applications. In many areas of application, the electronics are completely encapsulated with thermosets in a single process st...
Precise data regarding the overall mass of the machinery and the gradient of the track are crucial for optimizing the control of monorail cranes and enhancing energy efficiency. Within the context of electric monorail cranes (EMCs), accurately estima...
Thoroughly and accurately identifying various defects on concrete surfaces is crucial to ensure structural safety and prolong service life. However, in actual engineering inspections, the varying shapes and complexities of concrete structural defects...
In this paper the results of the EMC tests of the wideband power sources: the PWM-based power source and audio power amplifier are discussed. They are intended to be used to supply the measuring system developed for evaluation of the wideband transfo...
Power line communication (PLC) is increasingly emerging as an important communication technology for the smart-grid environment. As PLC systems use the existing infrastructure, they are always exposed to conducted electromagnetic interference (EMI) f...
This study presents tributyl acetylcitrate (TBAC) as a novel ecofriendly high flash point and high boiling point solvent for electrolytes in lithium-ion batteries. The flash point (
Concentrating organic matter in sludge and converting it into methane through anaerobic bioconversion can improve resource recovery from domestic wastewater. Enhanced membrane coagulation (EMC) is highly efficient at concentrating organic matter, but...
Enamel microcracks (EMCs) arising during the removal of metal orthodontic brackets represent a considerable challenge in dentistry. This in vitro study aims to explore the impacts of thermocycling, the types of orthodontic bonding agent, and curing t...
The performance of an electric vehicle (EV) notably depends on an energy management controller. This study developed several energy management controllers (EMCs) to optimize the efficiency of EVs in real-time driving conditions. Also, this study empl...
We describe two models of Power Transistors (IGBT, MOSFET); both were successfully used for the analysis of electromagnetic interference (EMI) and electromagnetic compatibility (EMC) while modeling high-voltage systems (PFC, DC/DC, inverter, etc.). T...
To increase the acceptance of electric vehicles (EVs), inductive charging technology can be an important tool because of the simplified charging process for the user. This paper presents the fundamentals of wireless power transfer (WPT) for EVs, whil...
Stormwater runoff from expressways generally has high concentrations of heavy metals. However, the heavy metal removal of conventional sand filters is low, so a better alternative is required. In this study, several inexpensive materials were tested...
of 3