- Article
Given the widespread application of multi-story modular container building structures, this article proposes a new seismic isolation system called the “sliding friction isolation system (IS)” that utilizes friction energy dissipation betw...
Given the widespread application of multi-story modular container building structures, this article proposes a new seismic isolation system called the “sliding friction isolation system (IS)” that utilizes friction energy dissipation betw...
Deep-sea offshore wind power generation has gained increasing attention in the past decade. The low cost and high efficiency of the DC grid system make it more competitive when the transmission distance is over 100 km. As the key enabler of the DC gr...
Series connections of modules in cascaded multilevel converters are prone to power imbalances due to voltage differences on their DC side. When modules are connected to direct current (DC) sources, such as photovoltaic panels, the capability of withs...
The rapid electrification of transportation has accelerated the demand for high-power electric vehicle (EV)-charging systems with high efficiency, compact size, galvanic isolation, and flexible scalability. Conventional isolated EV chargers typically...
The exponential proliferation of the Internet of Things (IoT) has catalyzed a paradigm shift in industrial automation and smart city infrastructure. However, this rapid expansion has engendered significant heterogeneity in communication protocols, cr...
This paper proposes a modularity for paralleling different rated power supplies without adding a circuit in the feedback loop by using direct and overlapped switching methods. Unlike an isolated output diode, the use of an isolated output switch comp...
The increasing demand for high-power electric vehicle charging systems with Vehicle-to-Grid (V2G) capability highlights the need for modular, scalable power converters. This paper proposes a hierarchical control strategy for a high-power, multi-port...
Low-frequency alternating current (LFAC) transmission has attracted increasing attention for medium- and long-distance offshore wind power transmission, as this application scenario is typically characterized by long transmission distance and large i...
Offshore wind farms (OWFs) integration are attractive extensively for furnishing more robust power than land wind farms. This paper introduces a modular combined DC-DC autotransformer (MCAT), which contributes to the offshore wind power integration o...
Small modular nuclear reactors (SMRs) offer the promise of providing carbon-free electricity and heat to small islands or isolated electricity grids. However, the economic feasibility of SMRs is highly system-dependent and has not been studied in thi...
This article systematically addresses the anthropogenic consequences affecting lands burdened by extractive operations—spanning approximately 4900 hectares across 28 mineral resource sites in northeastern Romania. Over time, a process of &ldquo...
The solid-state Marx pulse generator is widely used in various fields such as biomedical electroporation, food processing, and plasma material modification. In this paper, an inductor is chosen as an isolation device and by adding a switch to the cir...
In this paper, we propose a novel concept of a modular, multiport, single-stage, bidirectional, isolated, three-phase AC-DC converter system. This new system is realized using add-ons to a standard voltage source inverter, including both grid-connect...
This paper proposes a novel methodology for identifying a subset of critical isolation valves in water distribution networks (WDNs), the guaranteed operability of which significantly mitigates the risk associated with potential failures of other valv...
This paper presents an improved structure for the submodules (SMs) in the three-phase modular inverter (TPMI) based on a dual isolated SEPIC/CUK (DISC) converter for large-scale photovoltaic (LSPV) plants. The DISC SMs can offer several advantages, i...
Fuel cells (FCs) offer several operational advantages when integrated as a power source in electric vehicles (EVs). Since the voltage of these cells is typically low, usually less than 1 V, the power conversion system requires a DC–DC converter...
The Solid-State Transformer (SST) is a complex conversion device that intends to replace the Low-Frequency Transformers (LFTs) used in various power applications with Medium- or High-Frequency Transformers (MFTs/HFTs) that integrate modular converter...
Unlike the modular multilevel converter (MMC) topology operated under the rectifier or inverter modes, control of the balanced state for the submodule (SM) capacitor voltage has emerged as the key issue for DC-DC MMCs. This is mainly caused by no bal...
DC transformers have emerged as essential devices for medium voltage DC (MVDC)-low voltage DC (LVDC) distribution systems. However, conventional step-down single-level converters have limits on the voltage level of the MVDC-LVDC distribution system....
The application of the nanosecond pulsed electric field (nsPEF) for biomedical treatments has gained more interest in recent decades due to the development of pulsed power technologies which provides the ability to control the electric field dose app...
Solid State Transformers (SSTs) represent an emerging technology that seeks to improve upon traditional Low-Frequency Transformers (LFTs) with Medium-Frequency Transformers (MFTs) of reduced core size while incorporating modular converter structures...
Photovoltaic (PV) plants can be built rapidly when compared with other conventional electrical plants; hence, they are a competent candidate for supplying the electricity grid. The output power of the PV modules can be used in plug-in electric vehicl...
Compared to the AC counterpart, the DC shore power system provides a significant advantage of efficient power supply from renewable sources to ships and onshore loads. Super-capacitors serve as key energy storage units in such a system to buffer the...
A k-labeling from the vertex set of a simple graph
In the aftermath of the COVID-19 pandemic, the urgent need for the rapid deployment of healthcare facilities propelled the rise of modular construction using an infill approach. In these modular, negative-pressure wards, the design of indoor airflow...
Background: Trait creativity is linked to brain functional connectivity, but prior studies have focused on isolated networks, neglecting whole-brain architecture. Extraversion overlaps with creativity, yet its neural mechanisms remain unclear. Object...
The development of retail stores is determined by many factors, including the availability of retail space. The construction of a new building requires time, resources, and permits. This article aims to examine the possibilities of implementing small...
Three different Bacillus bacteriophages designated TP21 are known from the literature. We have determined the sequence and structure of the TP21-L genome, and compared it to the other phages. The genome is 37.5 kb in size, possesses fixed invariable...
The demand for reliable and efficient high-power DC-DC converters has driven significant advancements in fault-tolerant topologies, particularly within modular power converters. Failures in these configurations pose critical operational and safety ch...
This paper presents a model predictive control (MPC) strategy to regulate output voltages in a multi-modular matrix converter topology for isolated loads. The converter system harnesses power from a six-phase permanent magnet synchronous generator (P...
The rapid advancement of machine-learning techniques has played a significant role in the evolution of engine health management technology. In the last decade, deep-learning methods have received a great deal of attention in many application domains,...
This study investigates the progressive compressive behavior of modular interior frames with rotary-type module-to-module inter-modular (M2M) connections under sequential column failure. A novel two-stage testing protocol was applied, compressing the...
For a simple graph G with no isolated edges and at most, one isolated vertex, a labeling
Volatile markets and increasing demands for quality and fast availability of specialty chemical products have motivated the rise of small-scale, integrated, and modular continuous processing plants. As a significant unit operation used for product is...
Automotive systems are experiencing a rapid increase in complexity driven by the transition towards software-defined vehicles, autonomous functionalities and increasingly interconnected E/E architectures. This transformation intensifies variability a...
In vitro selection with long random RNA libraries has been used as a powerful method to generate novel functional RNAs, although it often requires laborious structural analysis of isolated RNA molecules. Rational RNA design is an attractive alternati...
The subsea observation network has become an indispensable means of ocean exploration worldwide. However, the scale of the subsea observation network is limited by the power supply voltage and power level. Hence, to promote the development of a subse...
With the expansion of E-mobility technology, the demand for Medium-Voltage (MV) Electric Buses (E-buses) charging infrastructure has significantly increased. In this regard, the effective connection of E-bus chargers to a medium voltage power grid is...
The continued and envisioned large-scale integration of renewable energy sources as a reaction to rising global temperatures and climate change will need a readily available DC grid to increase commissioning and operating efficiency. The effective op...
The continued commissioning of DC microgrids in an effort to achieve net-zero carbon levels in the atmosphere demands the large-scale deployment of converters to make the power from renewable energy sources, such as solar PV, usable. To control these...
This paper presents the theoretical analysis, experimental results and generalized structure for N modules of an isolated dc–dc SEPIC converter. The structure comes from the integration of N conventional SEPIC converters based on the input-seri...
Supplying shipping vessels with electricity at the ports can improve the air quality of the ports, reduce the greenhouse gas emissions from the shipping industry, contribute to the economic growth, and increase the political dependency of the countri...
This paper presents a novel, scalable, and modular multiport power electronic topology for the integration of multiple resources. This converter is not only scalable in terms of the integration of multiple renewable energy resources (RES) and storage...
Modular multilevel converters with non-sinusoidal ac voltage output can reduce cost and volume in medium-voltage-connected electric vehicle battery charging applications. The use of full-bridge submodules in such converters enables single-stage ac/ac...
This study presents an enhanced composite modular DC/DC converter topology designed to address critical technical requirements in wind power full DC systems, including high capacity, high conversion ratio, and fault isolation. The proposed topology c...
This paper proposes a double-three-phase permanent magnet fault-tolerant machine (DTP-PMFTM) with low short-circuit current for flywheel energy storage systems (FESS) to balance torque performance and short-circuit current suppression. The key innova...
Nowadays, the demand for high power converters for DC applications, such as renewable sources or ultra-fast chargers for electric vehicles, is constantly growing. Galvanic isolation is mandatory in most of these applications. In this context, the Sol...
A step-up DC/DC converter is required to match the fuel cell’s stack voltage with the DC-link capacitor of the propulsion system in fuel cell-based electric vehicles (FCEVs). Typically, the nominal voltage of a single fuel cell ranges from 0.5...
To meet the increasingly strict requirements of modern communication, radar detection and electronic measurement systems for wide-bandwidth, low-insertion-loss and high-isolation signal routing, this paper presents a 16 × 16 programmable switch...
Counties are the fundamental platforms of urban–rural integration in China. Indicators at the county level, however, are insufficiently investigated for their interlinkage with each other. This study focuses on the indicators in the China Stati...
of 6