Power Electronics
A section of Electronics (ISSN 2079-9292).
Section Information
Power electronics has emerged as a key technology in the conversion and control of electrical power in multiple applications: electric drives and generators, renewable energy systems, energy storage systems, smart cities, smart grids, power systems, transport (vehicles, aircraft, ships, and others), industrial, medical, military, telecommunications, consumable and home apparatus.
This Section is devoted to publishing original research and state-of-the-art review papers on emerging technologies and trends in power electronics, including components, circuits, design, modelling, simulation, control, implementation, testing and analysis of power electronics and their applications.
Subject Areas
The subject areas include but are not limited to:
- Power electronic circuits: DC/DC, DC/AC and AC/AC power converters.
- Power electronic components: switching devices, diodes, inductors, capacitors, transformers, filters, sensors, etc.
- Power electronic control: modulation techniques, control techniques, control systems, etc.
- Instrumentation, monitoring and IoT of power electronics and their applications.
- EMI/EMC in power electronics.
- Electric drives and generators.
- Power electronics for renewable energy systems.
- Power electronics for energy storage systems.
- Power electronics for smart cities.
- Power electronics for smart grids.
- Power electronics for power systems: FACTS, HVDC systems, etc.
- Power electronics for transport applications (electric vehicles, trains, aircrafts, ships, etc.).
- Power electronics for industrial applications.
- Power electronics for medical applications.
- Power electronics for telecommunication applications.
- Power electronics for energy harvesting systems.
- Power electronics for consumable applications.
- Power electronics for home appliances.
Editorial Board
Topical Advisory Panel
Special Issues
Following special issues within this section are currently open for submissions:
- Improving Sustainability: Energy Management in Electrical Transportation (Deadline: 31 July 2024)
- Power-Electronic-Based Smart Grid and Its Control Technology (Deadline: 15 August 2024)
- Digital Control to Power Electronics, 2nd Edition (Deadline: 15 August 2024)
- New Insight in Power Electronics of Topology, Control, and Application System (Deadline: 15 August 2024)
- Recent Advances in Wireless Power Transfer System (Deadline: 15 August 2024)
- A Mass Adoption of Power Electronics in Wind Power System (Deadline: 15 August 2024)
- Monitoring and Analysis for Smart Grids (Deadline: 15 August 2024)
- Recent Advances in Modeling, Optimization and Control of the Distributed Energy Resources (Deadline: 15 August 2024)
- Electrical Power Systems Quality (Deadline: 20 August 2024)
- Recent Advances in Electrified Vehicles and Transportation Electrification (Deadline: 31 August 2024)
- Power Electronics in Italy—Emerging Electronic Power Technologies and Electronic Devices in the Industrial 4.0 Era (Deadline: 31 August 2024)
- Computational Intelligence Techniques for Future Power Systems (Deadline: 15 September 2024)
- Design and Control of Smart Renewable Energy Systems (Deadline: 15 September 2024)
- Digital Twins and Robust Design Optimization for Greener Manufacturing of Electrical Machines and Devices (Deadline: 15 September 2024)
- Wireless Power Transfer Technology and Its Applications (Deadline: 15 September 2024)
- High Power Density Power Electronics (Deadline: 15 September 2024)
- Power Quality Conditioning and Stability Enhancement of More-Electronics Power Systems, Volume II (Deadline: 15 September 2024)
- Recent Advances in RF Rectifying Technology for EM Energy Harvesting and Wireless Power Transfer (Deadline: 15 September 2024)
- Advanced Electronic Systems for Industrial 4.0 Development: Applications, Systems and Algorithms (Deadline: 15 September 2024)
- Resilience Metrics Development for Power Systems (Deadline: 15 September 2024)
- Wide-Band-Gap Devices Enabled High Efficiency and High Power-Density Motor-Drives (Deadline: 30 September 2024)
- Systems and Technologies for Smart Homes and Smart Grids (Deadline: 30 September 2024)
- Advanced Technologies in Integration of Distributed Energy Resources (Deadline: 30 September 2024)
- Deep Learning Applications in Optimization and Control of Power Transmission and Distribution (Deadline: 15 October 2024)
- Deep Learning for Power Transmission and Distribution (Deadline: 15 October 2024)
- Compatibility, Power Electronics and Power Engineering (Deadline: 15 October 2024)
- Advanced Technologies for Renewable Energy Systems and Their Applications (Deadline: 15 October 2024)
- Energy Sources Integrated with Power Distribution Systems Using Machine Learning Approach (Deadline: 15 October 2024)
- Recent Advances in High-Performance Electrical Machine Drives: Design, Optimization, Manufacturing, and Control (Deadline: 15 October 2024)
- Application and Design of Power Electronics Converters for Electric Vehicle Charging (Deadline: 15 October 2024)
- Anomaly Detection and Prevention in the Smart Grid (Deadline: 15 October 2024)
- Optimal Integration of Energy Storage and Conversion in Smart Grids (Deadline: 15 October 2024)
- Mentor Program: Smart Controller of Energy Aggregators in Distributed Energy Resources (Deadline: 15 October 2024)
- Situational Awareness and Protection Technologies for Low-Carbon Economic Operation of New Power Systems (Deadline: 16 October 2024)
- Recent Advances in Hybrid Power Generation Using Solar and Wind Energy (Deadline: 16 October 2024)
- Power Electronics and Renewable Energy System (Deadline: 31 October 2024)
- Power Electronics in Smart Grids (Deadline: 31 October 2024)
- Energy Harvesting and Energy Storage Systems, 3rd Edition (Deadline: 31 October 2024)
- High-Voltage Technology and Its Applications (Deadline: 31 October 2024)
- Multi-Level Power Converters Systems (Deadline: 15 November 2024)
- Advanced Design in Electrical Machines (Deadline: 15 November 2024)
- New Horizons and Recent Advances in Smart Energy Grids (Deadline: 15 November 2024)
- Direct Current Control of Power Electronics (Deadline: 15 November 2024)
- Applications and Development of Supercapacitor and Energy Storage Device (Deadline: 15 November 2024)
- Intelligent Control of Power Grid and Renewable Energy System (Deadline: 15 November 2024)
- Power Electronics Solutions for Smart Grids (Deadline: 15 November 2024)
- Design and Optimization of Energy Harvesting Systems in Electronics (Deadline: 15 November 2024)
- Emerging Technologies in DC Microgrids (Deadline: 15 November 2024)
- Power Electronics in Renewable Systems (Deadline: 15 November 2024)
- Applications of Capacitors in Power Electronics (Deadline: 15 November 2024)
- Analysis and Control Techniques in Power-Electronic-Based Power System (Deadline: 15 November 2024)
- Modeling and Design of Power Converters (Deadline: 15 November 2024)
- Power Electronics and Its Applications in Power System (Deadline: 20 November 2024)
- Innovative Technologies in Power Converters, Volume II (Deadline: 30 November 2024)
- Trends in Photovoltaic Systems for Enhanced Power Generation and Energy Efficiency (Deadline: 30 November 2024)
- Control and Optimization of Power Converters and Drives (Deadline: 30 November 2024)
- Advancements in Power Electronics Conversion Technologies (Deadline: 30 November 2024)
- New Insights on Renewable Energy Integration in Power Systems (Deadline: 10 December 2024)
- Islanding and Interconnected Microgrids: Dynamics, Control and Protection (Deadline: 15 December 2024)
- Advanced Power Generation and Conversion Systems, 2nd Edition (Deadline: 15 December 2024)
- Implementation of Renewable Energy in Power Distribution Systems Using Digitalization (Deadline: 15 December 2024)
- Applications, Control and Design of Power Electronics Converters (Deadline: 15 December 2024)
- Recent Advances and Applications in Electric Machines Design, Modelling, Control, and Operation (Deadline: 15 December 2024)
- Advances in Pulsed-Power and High-Power Electronics (Deadline: 15 December 2024)
- Design and Control of High-Power AC-DC/DC-DC Power Converters in Emerging Energy and Industrial Applications (Deadline: 15 December 2024)
- New Insights in Power Electronics: Prospects and Challenges (Deadline: 15 December 2024)
- Storage Systems and Power Electronics: Challenges, New Opportunities and Emerging Trends (Deadline: 15 December 2024)
- Advanced DC-DC Converter Topology Design, Control, Application (Deadline: 15 December 2024)
- Polyphase Insulation and Discharge in High-Voltage Technology (Deadline: 15 December 2024)
- Advanced Applications of Power Electronics in Net-Zero Power Systems (Deadline: 15 December 2024)
- Recent Advances in Grid Integration and Operational Control Technologies of Renewable Energy Sources (Deadline: 15 December 2024)
- Planning, Operation and Control of Power Systems with Large Amounts of Variable Renewable Generation (Deadline: 15 December 2024)
- New Trends in Power Electronics for Microgrids (Deadline: 15 December 2024)
- Power Electronics in Hybrid AC/DC Grids and Microgrids (Deadline: 15 December 2024)
- New Horizons and Recent Advances of Power Electronics (Deadline: 15 December 2024)
- Energy Technologies in Electronics and Electrical Engineering (Deadline: 16 December 2024)
- Advanced Technologies in Power Electronics and Electric Drives (Deadline: 16 December 2024)
- Railway Traction Power Supply, 2nd Edition (Deadline: 30 December 2024)
- Energy Harvesting for IoT, Wireless Sensors, Stand-Alone Systems and Electronics (Deadline: 31 December 2024)
- Section Collection Series: New Horizons and Recent Advances in Power Electronics (Deadline: 31 December 2024)
- Feature Review Papers in Power Electronics (Deadline: 31 December 2024)
- Technology and Approaches of Battery Energy Storage System (Deadline: 15 January 2025)
- Advances in Renewable Energy Technologies and Systems for Smart Cities (Deadline: 15 January 2025)
- Sustainable Harvesting Technologies: Vibration, Renewable, and Thermal Energy Advances (Deadline: 15 January 2025)
- AI-Empowered Decarbonization for Modern Power Grids (Deadline: 15 January 2025)
- Hydrogen and Fuel Cells: Innovations and Challenges (Deadline: 15 January 2025)
- Superconducting Machines Performance Optimization (Deadline: 15 January 2025)
- Advanced Control Techniques for Power Converter and Drives (Deadline: 15 January 2025)
- Applications of Artificial Intelligence Techniques in Microgrid (Deadline: 15 January 2025)
- Reliability and Artificial Intelligence in Power Electronics (Deadline: 15 January 2025)
- Smart Energy Communities: State of the Art and Future Developments (Deadline: 30 January 2025)
- Hardware in the Loop, Real-Time Simulation and Digital Control of Power Electronics and Drives, Volume II (Deadline: 31 January 2025)
- Advanced Online Monitoring and Fault Diagnosis of Power Equipment (Deadline: 31 January 2025)
- Innovations in Intelligent Microgrid Operation and Control (Deadline: 15 February 2025)
- Artificial Intelligence Applications in Electrical and Energy Systems (Deadline: 15 February 2025)
- Power Converters for Industrial Applications: New Insights and Trends (Deadline: 15 February 2025)
- Energy Management and Control in Emerging Electrified Transportation Systems (Deadline: 15 February 2025)
- New Insights of Wireless Power Transfer (Deadline: 15 February 2025)
- Applications of Advanced Control in Electrical Systems (Deadline: 15 February 2025)
- Microgrids: Innovations in Fault Detection, Security, and Addressing Challenges (Deadline: 15 February 2025)
- Machine Learning for Next-Generation Power Systems: Challenges and Opportunities (Deadline: 15 February 2025)
- Modeling and Optimization of Energy Efficiency in the Light of Energy Security (Deadline: 15 February 2025)
- Recent Advances in Modeling and Control of Electric Energy Systems (Deadline: 15 February 2025)
- Advanced Power Electronics and Sustainable Energy Systems: Recent Developments, Challenges and Future Perspectives (Deadline: 28 February 2025)
- Advancements in Electric Motors, Drives, Power Converters and Related Systems, 2nd Edition (Deadline: 28 February 2025)
- Advanced Renewable Energy Systems to Power the Future: Green and Sustainable (Deadline: 28 February 2025)
- Advanced Condition Monitoring and Health Diagnosis of Power Equipment Oriented towards New Power Systems (Deadline: 1 March 2025)
- Data Analytics for Power System Operations (Deadline: 15 March 2025)
- Innovative Smart Microgrids for Power System (Deadline: 15 May 2025)
- Power Quality and Power Electronics Systems in Electromobility (Deadline: 31 December 2025)
Topical Collection
Following topical collection within this section is currently open for submissions: