Skip to Content

652 Results Found

  • Article
  • Open Access
23 Citations
3,688 Views
13 Pages

Effects of Modified Anodes on the Performance and Microbial Community of Microbial Fuel Cells Using Swine Wastewater

  • Hongjun Ni,
  • Kaixuan Wang,
  • Shuaishuai Lv,
  • Xingxing Wang and ,
  • Jiaqiao Zhang,
  • Lu Zhuo and
  • Fei Li
  • + 2 authors+ 0 author

2 August 2020

Microbial fuel cells (MFCs) have emerged as a sustainable technology for wastewater treatment that has potential to recycle bioelectricity from livestock wastewater. The performance of MFCs is influenced by the synergistic effect of anode material wi...

(This article belongs to the Special Issue Wastewater Treatment and Resource Recovery)
  • Article
  • Open Access
8 Citations
4,340 Views
11 Pages

Partial Replacement of Petroleum Coke with Modified Biocoke during Production of Anodes Used in the Aluminum Industry: Effect of Additive Type

  • Belkacem Amara,
  • Duygu Kocaefe,
  • Yasar Kocaefe,
  • Dipankar Bhattacharyay and ,
  • Jules Côté and
  • André Gilbert
  • + 1 author+ 0 author

28 March 2022

In order to reduce greenhouse gas (GHG) emissions, biocoke modified with different additives was used to replace part of the petroleum coke. Previously, a number of researchers attempted to manufacture anodes using biocoke. However, the majority of t...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
16 Citations
7,083 Views
8 Pages

15 September 2016

The inferior hydrophilicity of graphene is an adverse factor to the performance of the graphene modified anodes (G anodes) in microbial fuel cells (MFCs). In this paper, different amounts of hydrophilic graphene oxide (GO) were doped into the modific...

  • Article
  • Open Access
16 Citations
4,940 Views
13 Pages

12 December 2019

Sodium-ion storage devices have received widespread attention because of their abundant sodium resources, low cost and high energy density, which verges on lithium-ion storage devices. Electrochemical redox reactions of metal oxides offer a new appro...

  • Article
  • Open Access
20 Citations
5,106 Views
15 Pages

Enhanced Performance of Microbial Fuel Cells with Anodes from Ethylenediamine and Phenylenediamine Modified Graphite Felt

  • Egidijus Griškonis,
  • Arminas Ilginis,
  • Ilona Jonuškienė,
  • Laurencas Raslavičius and ,
  • Rolandas Jonynas and
  • Kristina Kantminienė
  • + 1 author+ 0 author

5 August 2020

A microbial fuel cell (MFC) is a promising renewable energy option, which enables the effective and sustainable harvesting of electrical power due to bacterial activity and, at the same time, can also treat wastewater and utilise organic wastes or re...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
5 Citations
4,835 Views
16 Pages

Lead dioxide-based electrodes have shown a great performance in the electrochemical treatment of organic wastewater. In the present study, modified PbO2 anodes supported on stainless steel (SS) with a titanium oxide interlayer such as SS/TiO2/PbO2 an...

(This article belongs to the Collection Feature Paper Collection in Section 'Materials in Separation Science')
  • Article
  • Open Access
13 Views
30 Pages

19 November 2026

Understanding urea electrooxidation kinetics and optimizing electrode performance are essential for advancing efficient membrane-less direct urea fuel cells (DUFCs). In this study, CeO2-modified Ni/carbon nanofiber-based anodes, fabricated via electr...

(This article belongs to the Special Issue Nanomaterials for Eco-Sustainable Catalysis)
  • Article
  • Open Access
8 Citations
3,551 Views
14 Pages

Silver-Doped Anodic Alumina with Antimicrobial Properties—Synthesis and Characterization

  • Denitsa Kiradzhiyska,
  • Nikolina Milcheva,
  • Tsvetelina Batsalova,
  • Balik Dzhambazov and ,
  • Nikolay Zahariev and
  • Rositsa Mancheva
  • + 1 author+ 0 author

11 March 2022

The incessant need for the elimination of pathogenic viruses and multi-drug resistant bacteria has been a critical issue during recent decades, and requires the creation of new antimicrobial materials. Our study describes the production of silver-mod...

(This article belongs to the Special Issue Advances in Biomedical Metallic Materials)
  • Article
  • Open Access
2 Citations
1,748 Views
19 Pages

6 November 2025

Soils heavily contaminated with potentially toxic elements (PTEs) pose substantial risks to the environment and human health. However, conventional remediation methods are often plagued by high energy consumption and the potential for secondary pollu...

(This article belongs to the Section Toxicity Reduction and Environmental Remediation)
  • Article
  • Open Access
9 Citations
3,116 Views
18 Pages

Improving the Voltammetric Determination of Hg(II): A Comparison Between Ligand-Modified Glassy Carbon and Electrochemically Reduced Graphene Oxide Electrodes

  • Matei D. Raicopol,
  • Andreea M. Pandele,
  • Constanţa Dascălu,
  • Eugeniu Vasile and ,
  • Anamaria Hanganu,
  • Gabriela-Geanina Vasile,
  • Ioana Georgiana Bugean,
  • Cristian Pirvu,
  • Gabriela Stanciu and
  • George-Octavian Buica
  • + 5 authors+ 0 author

28 November 2020

A new thiosemicarbazone ligand was immobilized through a Cu(I)-catalyzed click reaction on the surface of glassy carbon (GC) and electrochemically reduced graphene oxide (GC-ERGO) electrodes grafted with phenylethynyl groups. Using the accumulation a...

(This article belongs to the Section Chemical Sensors)
  • Proceeding Paper
  • Open Access
1,450 Views
5 Pages

Electrocatalytic Properties of Co Nanoconical Structured Electrode Produced by One-Step and Two-Step Methods

  • Katarzyna Skibinska,
  • Karolina Kolczyk-Siedlecka,
  • Dawid Kutyla,
  • Anna Jedraczka and
  • Piotr Zabinski

9 November 2020

One-dimensional (1D) nanostructures, such as nanotubes, nanopores, nanodots and nanocones, are characterized by better catalytic properties than bulk materials due to their large active surface area and small geometrical size. There are several metho...

(This article belongs to the Proceedings of The 1st International Electronic Conference on Catalysis Sciences)
  • Article
  • Open Access
13 Citations
3,238 Views
15 Pages

Electrocatalytic Properties of Co Nanoconical Structured Electrodes Produced by a One-Step or Two-Step Method

  • Katarzyna Skibinska,
  • Karolina Kolczyk-Siedlecka,
  • Dawid Kutyla,
  • Anna Jedraczka and ,
  • Beata Leszczyńska-Madej,
  • Mateusz M. Marzec and
  • Piotr Zabinski
  • + 2 authors+ 0 author

24 April 2021

One-dimensional (1D) nanostructures, such as nanotubes, nanopores, nanodots and nanocones, are characterized by better catalytic properties than bulk material due to their large active surface area and small geometrical size. These structures can be...

  • Article
  • Open Access
29 Citations
6,970 Views
13 Pages

24 January 2018

In this study, TiO2 nanotubes (TNTs) were fabricated on a Ti sheet following the anodic oxidation method and were decorated with reduced graphene oxide (RGO), graphene oxide (GO), and bismuth (Bi) via electrodeposition. The surface morphologies, crys...

  • Article
  • Open Access
1 Citations
533 Views
19 Pages

Pyranochromene/Nafion-Modified Glassy Carbon Electrode for Selective Electrochemical Determination of Cd(II): Synthesis, Interfacial Mechanism, and Water Analysis

  • Nada K. H. Alzahrani,
  • Naha Meslet Alsebaii,
  • Fatmah M. Alshareef,
  • Azhaar T. Alsaggaf and ,
  • Mohamed A. El Hamd,
  • A. Al Solami,
  • Najwa Ali Asiri,
  • Eman Alsolmy and
  • Wejdan T. Alsaggaf
  • + 4 authors+ 0 author

A pyranochromene-based ligand, 2-amino-4-(4-chlorophenyl)-5-oxo-4H,5H-pyrano[3,2-c]chromene-3-carbonitrile (ACLPh-PC-3-CN), was employed as a chelating modifier for the electrochemical determination of Cd(II) in water samples. ACLPh-PC-3-CN was co-im...

(This article belongs to the Section Electrochemical Devices and Sensors)
  • Article
  • Open Access
44 Citations
9,096 Views
13 Pages

Enhanced Photocatalytic Performance of Nitrogen-Doped TiO2 Nanotube Arrays Using a Simple Annealing Process

  • Phuoc Huu Le,
  • Le Trung Hieu,
  • Tu-Ngoc Lam,
  • Nguyen Thi Nhat Hang and ,
  • Nguyen Van Truong,
  • Le Thi Cam Tuyen,
  • Pham Thanh Phong and
  • Jihperng Leu
  • + 3 authors+ 0 author

24 November 2018

Nitrogen-doped TiO2 nanotube arrays (N-TNAs) were successfully fabricated by a simple thermal annealing process in ambient N2 gas at 450 °C for 3 h. TNAs with modified morphologies were prepared by a two-step anodization using an aqueous NH4F/ethylen...

  • Article
  • Open Access
14 Citations
3,399 Views
17 Pages

The Performance of a Modified Anode Using a Combination of Kaolin and Graphite Nanoparticles in Microbial Fuel Cells

  • Lea Ouaknin Hirsch,
  • Bharath Gandu,
  • Abhishiktha Chiliveru,
  • Irina Amar Dubrovin and ,
  • Shmuel Rozenfeld,
  • Alex Schechter and
  • Rivka Cahan
  • + 2 authors+ 0 author

The bacterial anode in microbial fuel cells was modified by increasing the biofilm’s adhesion to the anode material using kaolin and graphite nanoparticles. The MFCs were inoculated with G. sulfurreducens, kaolin (12.5 g·L−1), and...

(This article belongs to the Section Microbial Biotechnology)
  • Article
  • Open Access
22 Citations
3,728 Views
10 Pages

26 April 2021

Anode modification is a useful method to increase the performance of microbial fuel cells (MFCs). By using the electrochemical deposition method, Fe3O4 and polypyrrole (PPy) were polymerized on a carbon felt anode to prepare Fe3O4-PPy composite modif...

(This article belongs to the Section A5: Hydrogen Energy)
  • Article
  • Open Access
4 Citations
2,847 Views
12 Pages

Preparation and Preliminary Evaluation of Silver-Modified Anodic Alumina for Biomedical Applications

  • Denitsa Kiradzhiyska,
  • Nikolina Milcheva,
  • Rositsa Mancheva,
  • Tsvetelina Batsalova and ,
  • Balik Dzhambazov and
  • Nikolay Zahariev
  • + 1 author+ 0 author

27 December 2021

The present study reports a specific method for preparation of silver-modified anodic alumina substrates intended for biomaterial applications. Al2O3 coatings were obtained by anodization of technically pure aluminum alloy in sulfuric acid electrolyt...

(This article belongs to the Special Issue Advances in Biomedical Metallic Materials)
  • Article
  • Open Access
2 Citations
4,069 Views
13 Pages

Development of Photocatalytically Active Anodized Layers by a Modified Phosphoric Acid Anodizing Process for Air Purification

  • Stephan Lederer,
  • Sigrid Benfer,
  • Jonathan Bloh,
  • Rezan Javed and ,
  • Aneta Pashkova and
  • Wolfram Fuerbeth
  • + 1 author+ 0 author

One of the key urban air quality issues is pollution by nitrogen oxides (NOx). To reduce NOx, facade cladding could be provided with photocatalytic properties by incorporating titanium dioxide nanoparticles. For this purpose, a modified phosphoric ac...

(This article belongs to the Special Issue Advances in Corrosion Protection by Coatings)
  • Essay
  • Open Access
9 Citations
2,935 Views
17 Pages

Removal of Diclofenac Sodium from Wastewater in Microbial Fuel Cell by Anode Modified with MnCo2O4

  • Roya Morovati,
  • Mohammad Hoseini,
  • Abooalfazl Azhdarpoor,
  • Mansooreh Dehghani and ,
  • Mohammad Ali Baghapour and
  • Saeed Yousefinejad
  • + 1 author+ 0 author

26 October 2022

Microbial fuel cell (MFC) with a modified anode is one of the new methods to increase MFC efficiency. This study synthesized an anode modified with cobalt manganese oxide (MnCo2O4@CF) on carbon felt (CF) by easy hydrothermal method and binder-free. C...

  • Article
  • Open Access
1,622 Views
26 Pages

Boron-Modified Anodization of Preferentially Oriented TiO2 Nanotubes for Photoelectrochemical Applications

  • Fedor Zykov,
  • Or Rahumi,
  • Igor Selyanin,
  • Andrey Vasin and ,
  • Ivan Popov,
  • Vadim Kartashov,
  • Konstantin Borodianskiy and
  • Yuliy Yuferov
  • + 3 authors+ 0 author

27 August 2025

This study investigates the synthesis and characterization of boron-modified nanotubular titania (NTO) arrays fabricated via a single-step anodizing process with varying concentrations of boric acid (BA). Following anodization, a reductive heat treat...

(This article belongs to the Section Chemical and Molecular Sciences)
  • Article
  • Open Access
19 Citations
3,921 Views
16 Pages

Polyaniline-Derived Nitrogen-Containing Carbon Nanostructures with Different Morphologies as Anode Modifier in Microbial Fuel Cells

  • Irina Lascu,
  • Claudiu Locovei,
  • Corina Bradu,
  • Cristina Gheorghiu and ,
  • Ana Maria Tanase and
  • Anca Dumitru
  • + 1 author+ 0 author

23 September 2022

Anode modification with carbon nanomaterials is an important strategy for the improvement of microbial fuel cell (MFC) performance. The presence of nitrogen in the carbon network, introduced as active nitrogen functional groups, is considered benefic...

(This article belongs to the Section Materials Science)
  • Article
  • Open Access
6 Citations
7,713 Views
12 Pages

Studies of Modified Hydrogen Storage Intermetallic Compounds Used as Fuel Cell Anodes

  • Yun Chen,
  • Diogo M. F. Santos,
  • César A. C. Sequeira and
  • Rui F. M. Lobo

28 December 2011

The possibility of substituting Pt/C with the hydrogen storage alloy MlNi3.6Co0.85Al0.3Mn0.3 as the anode active material of a proton exchange membrane fuel cell system has been analyzed. The electrochemical properties indicate that a much more elect...

(This article belongs to the Special Issue Hydrogen Storage Alloys)
  • Article
  • Open Access
5 Citations
3,057 Views
11 Pages

AlF3-Modified Carbon Anodes for Aluminum Electrolysis: Oxidation Resistance and Microstructural Evolution

  • Guifang Xu,
  • Yonggang Ding,
  • Fan Bai,
  • Youming Zhang and ,
  • Jianhua Yin and
  • Caifeng Chen
  • + 1 author+ 0 author

The aluminum electrolysis industry faces significant challenges due to the high consumption and environmental impact of carbon anodes, which are prone to oxidation in high-temperature and strongly oxidizing environments. This study innovatively intro...

(This article belongs to the Section Inorganic Materials)
  • Article
  • Open Access
1 Citations
1,183 Views
16 Pages

Iron Oxide-Modified Anode for Enhanced Sunset Yellow FCF Azo Dye Decolorization in Microbial Fuel Cell and Phytotoxicity Assessment

  • Muneeba Arshad,
  • Muhammad Waseem Mumtaz,
  • Mohamed El Oirdi,
  • Hamid Mukhtar and ,
  • Waheed Miran,
  • Muhammad Asam Raza,
  • Mohammad Aatif,
  • Ghazala Muteeb,
  • Hena Saeed Khan and
  • Mohd Farhan
  • + 5 authors+ 0 author

1 April 2026

Microbial fuel cell (MFC) technology is emerging as an effective tool for bioelectricity generation and wastewater treatment. This work is aimed at investigating the impact of an Fe2O3-modified carbon felt (CF) anode in a dual-chamber MFC for the tre...

(This article belongs to the Special Issue Sustainable Catalysis for Green Chemistry and Energy Transition, 2nd Edition)
  • Article
  • Open Access
1 Citations
1,000 Views
15 Pages

17 January 2026

Hard anodic oxide coatings on aluminium have long been used to enhance surface functionality. However, increasing industrial demands are driving the need for coatings with superior hardness, wear resistance, corrosion resistance and self-lubricating...

(This article belongs to the Special Issue Advances in Electrodeposition of Thin Films and Alloys)
  • Article
  • Open Access
24 Citations
3,640 Views
16 Pages

22 December 2023

Microbial fuel cell (MFC) performance is affected by the metabolic activity of bacteria and the extracellular electron transfer (EET) process. The deficiency of nanostructures on macroporous anode obstructs the enrichment of exoelectrogens and the EE...

(This article belongs to the Special Issue Nanoarchitectonics in Materials Science)
  • Article
  • Open Access
33 Citations
5,118 Views
11 Pages

Micro-Scale Surface Patterning of Titanium Dental Implants by Anodization in the Presence of Modifying Salts

  • Gaetano Marenzi,
  • Gianrico Spagnuolo,
  • Josè Camilla Sammartino,
  • Roberta Gasparro and ,
  • Alberto Rebaudi and
  • Marco Salerno
  • + 1 author+ 0 author

30 May 2019

The bone-implant interface influences peri-implant bone healing and osseointegration. Among various nano-engineering techniques used for titanium surface modification, anodization is a simple, high-throughput and low-cost process, resulting in a nano...

(This article belongs to the Special Issue Advanced Materials for Oral and Dentofacial Surgery)
  • Article
  • Open Access
2 Citations
1,316 Views
19 Pages

In the context of infrastructure modernization, enhancing the durability of reinforced concrete (RC) structures is crucial for achieving sustainable and resilient development. Impressed current cathodic protection (ICCP) is a popular technique to imp...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
12 Citations
5,263 Views
11 Pages

This work reports on the kinetics of electrochemical degradation of the resorcinol molecule, examined on nickel foam-based electrodes in contact with 0.1 M NaOH and 0.5 M Na2SO4 supporting electrolytes. The electrooxidation of resorcinol was examined...

(This article belongs to the Section Physical Chemistry)
  • Article
  • Open Access
766 Views
20 Pages

Modifying Recycled Graphite with Co3O4 Towards a Novel, Efficient Anode for the Electrochemical Treatment of a Textile Dyebath

  • Milica Petrović,
  • Slobodan Najdanović,
  • Nena Velinov Georgiev,
  • Jelena Mitrović and ,
  • Miljana Radović Vučić,
  • Miloš Kostić and
  • Aleksandar Bojić
  • + 2 authors+ 0 author

10 August 2026

Electrochemical oxidation is an effective method for degrading environmentally harmful textile dyes that are difficult to remove by conventional treatments. The novel graphite–Co3O4 anode, prepared by electrochemically modifying recycled graphi...

(This article belongs to the Special Issue Advanced Oxidation/Reduction Processes in Water Treatment)
  • Article
  • Open Access
4 Citations
2,476 Views
13 Pages

We used the Vienna ab initio Simulation Package (VASP), X-ray photoelectron spectroscopy (XPS) and diffuse reflectance (DRS) to optimize anode material for a photoelectric catalytic system. After screening how the doping of TiO2 by N and S affects it...

(This article belongs to the Section Environmental Separations)
  • Article
  • Open Access
3 Citations
1,778 Views
14 Pages

Concisely Constructing S, F Co-Modified MnO Nanoparticles Attached to S, N Co-Doped Carbon Skeleton as a High-Rate Performance Anode Material

  • Dan Zhang,
  • Chunyan Zhang,
  • Zhe Huo,
  • Jia Sun and ,
  • Guangyin Liu,
  • Xiaodi Liu and
  • Chuang Yu
  • + 2 authors+ 0 author

11 September 2024

The utilization of MnO anodes with high storage capacity is significantly hindered by rapid capacity fading and inadequate rate capability, stemming from substantial volume fluctuations and low electrical conductivity. Crafting a composite comprising...

(This article belongs to the Special Issue Recent Advances in Functionalized Nanomaterials: Design, Synthesis, Characterization, and Application)
  • Article
  • Open Access
44 Citations
6,222 Views
13 Pages

Polyaniline/Carbon Nanotubes Composite Modified Anode via Graft Polymerization and Self-Assembling for Microbial Fuel Cells

  • Wenguo Wu,
  • Hao Niu,
  • Dayun Yang,
  • Shibin Wang and ,
  • Nina Jiang,
  • Jiefu Wang,
  • Jia Lin and
  • Chaoyi Hu
  • + 3 authors+ 0 author

10 July 2018

Microbial fuel cells (MFCs) are promising devices for sustainable energy production, wastewater treatment and biosensors. Anode materials directly interact with electricigens and accept electrons between cells, playing an important role in determinin...

(This article belongs to the Special Issue Polymers for Energy Applications)
  • Article
  • Open Access
1 Citations
871 Views
16 Pages

7 August 2026

The development of high-performance anode materials remains a key challenge for advancing lithium-ion battery (LIB) technology. In this work, an oxy-bridged polymer cobalt phthalocyanine (Poly-CoPc) and its single-walled carbon nanotube-modified comp...

(This article belongs to the Special Issue Advanced Polymers and Polymer Composites for Energy Storage and Conversion)
  • Article
  • Open Access
6 Citations
2,712 Views
13 Pages

Facile Synthesis of Multi-Channel Surface-Modified Amorphous Iron Oxide Nanospheres as High-Performance Anode Materials for Lithium-Ion Batteries

  • Shijin Yu,
  • Wenzhen Zhu,
  • Ying Wei,
  • Jiahao Tong and ,
  • Quanya Wei,
  • Tianrui Chen,
  • Xuannan He,
  • Dingwen Hu,
  • Cuiyun Li and
  • Hua Zhu
  • + 5 authors+ 0 author

18 August 2022

Based on the synergistic effect of ripening and hydrogen ion etching in a hydrothermal solution, a simple, facile, and low-cost new strategy was demonstrated to prepare multi-channel surface-modified amorphous Fe2O3 nanospheres as anodes for Li-ion b...

  • Article
  • Open Access
3 Citations
1,516 Views
21 Pages

Synergistic Enhancement of Microbial Fuel Cell Performance via Hierarchical NiCo2O4/Polypyrrole-Modified Carbon Felt Anode

  • Yuchu Chen,
  • Jiuming Lei,
  • Zhijie Wang,
  • Xiangquan Kong and ,
  • Ting Zhang,
  • Yishuai Li,
  • Xianheng Yang,
  • Jinlong Zuo,
  • Jie Li and
  • Yuyang Wang
  • + 5 authors+ 0 author

14 October 2025

In this study, a carbon felt (CF)-based ternary composite anode was developed through the decoration of nickel cobaltite (NiCo2O4) nano-needles and subsequent in situ electropolymerization of polypyrrole (PPy). The structural and electrochemical prop...

  • Article
  • Open Access
18 Citations
3,015 Views
14 Pages

A CoFe2O4/Nb2C-MXene-Modified Anode Improved the Performance Characteristics of a Microbial Fuel Cell in Terms of Bioelectricity Generation and Water Treatment

  • Haseeb Ashraf,
  • Muhammad Waseem Mumtaz,
  • Haamid Jamil,
  • Hamid Muktar and ,
  • Waheed Miran,
  • Muhammad Tayyab Akhtar and
  • Faisal Wali
  • + 2 authors+ 0 author

26 November 2024

Water pollution is an alarming and critical environmental challenge that demands immediate attention. In addition to this, the world is also facing an energy crisis of ever-increasing proportions. Managing these issues through a sustainable approach...

(This article belongs to the Section Electrocatalysis)
  • Review
  • Open Access
35 Citations
8,218 Views
17 Pages

6 March 2023

Pencil graphite electrode (PGE) is an alternative, commercially available, ready-to-use, screen-printed electrode for a wide range of electroanalytical applications. Due to the complex-matrix composition and unpredictable electro-inactive nature of P...

(This article belongs to the Section Biosensors and Healthcare)
  • Article
  • Open Access
2 Citations
1,689 Views
13 Pages

23 December 2024

This investigation reports on the efficacy of a photoelectrocatalysis (PEC) system enhanced by a nitrogen-doped TiO2 nanocrystal-modified TiO2 nanotube array (N-TiO2 NCs/TNTAs) anode paired with a graphene oxide/activated carbon (GO/AC) photocathode...

(This article belongs to the Section Environmental Catalysis)
  • Article
  • Open Access
5 Citations
2,476 Views
17 Pages

Methods of Distributing the IF-WS2 Modifier for Its Introduction into the Structure of the Al2O3 Aluminum Oxide Coating

  • Joanna Korzekwa,
  • Mateusz Niedźwiedź,
  • Grzegorz Dercz,
  • Krzysztof Cwynar and ,
  • Maciej Sowa,
  • Marek Bara and
  • Wojciech Simka
  • + 2 authors+ 0 author

15 July 2024

The microstructures and structures of modified Al2O3/IF-WS2 coatings prepared on aluminum substrates are studied. Amorphous Al2O3 oxide coatings are obtained on EN AW 5251 aluminum alloy using the electrooxidation process. The quality of the IF-WS2 n...

(This article belongs to the Special Issue Characterization and Manufacturing of Nano-Composites and Nano-Composite Coatings)
  • Article
  • Open Access
9 Citations
3,145 Views
12 Pages

19 April 2023

Microbial fuel cells (MFCs) have exhibited potential in energy recovery from waste. In this study, an MFC reactor with a polyaniline–sodium alginate–graphene oxide (PANI–SA–GO)/carbon brush (CB) hydrogel anode achieved maximum...

  • Article
  • Open Access
6 Citations
3,517 Views
13 Pages

18 June 2024

Heavy metals constitute pollutants that are particularly common in air, water, and soil. They are present in both urban and rural environments, on land, and in marine ecosystems, where they cause serious environmental problems since they do not degra...

(This article belongs to the Special Issue Electrochemical Biosensing and Voltammetry Based on Modified Electrodes)
  • Article
  • Open Access
3 Citations
3,134 Views
12 Pages

Optimization of Electrical Intensity for Electrochemical Anodic Oxidation to Modify the Surface of Carbon Fibers and Preparation of Carbon Nanotubes/Carbon Fiber Multi-Scale Reinforcements

  • Mengfan Li,
  • Yanxiang Wang,
  • Bowen Cui,
  • Chengjuan Wang and ,
  • Hongxue Tan,
  • Haotian Jiang,
  • Zhenhao Xu,
  • Chengguo Wang and
  • Guangshan Zhuang
  • + 4 authors+ 0 author

18 December 2022

Carbon fiber (CF) reinforced composites are widely used due to their excellent properties. However, the smooth surface and few functional groups of CFs can lead to fiber fractures and pullout, which reduce the service life of the composites. The over...

(This article belongs to the Special Issue Carbon Fiber Composites, Volume II)
  • Article
  • Open Access
345 Views
18 Pages

GO/Cysteamine-Modified Screen-Printed Carbon Electrode for Square-Wave Anodic Stripping Voltammetric Determination of Cadmium in Fortified Mango and Avocado Digestates

  • Miguel Angel Lozada Rufino,
  • Eulogia Isabel Zapata Peña,
  • Gonzalo Manuel Delgado Valdiviezo,
  • Rosa Gisela Ortiz Castillo and ,
  • Grecia Xiomara Herrera Gavilan,
  • David César Ardiles Saravia,
  • Luis Alfredo Espinoza-Espinoza and
  • Karina Silvana Gutiérrez-Valverde
  • + 3 authors+ 0 author

29 September 2026

Cadmium contamination in fruits is a relevant food-safety concern because of its toxicity, environmental persistence, and potential transfer from agricultural soils to edible plant tissues. This study developed a screen-printed carbon electrode modif...

(This article belongs to the Section Environmental, Agricultural, and Food Biosensors)
  • Article
  • Open Access
64 Citations
15,266 Views
18 Pages

24 August 2006

This paper describes the electrocatalytic behaviour of a glassy carbon electrode (GCE)modified with cobalt(II)phthalocyanine (CoPc) complex peripherally tetrasubstituted withcobalt(II)tetraphenylporphyrin (CoTPP) complexes via ether linkages (i.e., C...

(This article belongs to the Special Issue Supramolecular Sensors)
  • Article
  • Open Access
6 Citations
3,526 Views
14 Pages

28 March 2023

In this research, we attempted to modify the bandgap of anodic titanium oxide by in situ incorporation of selected elements into the anodic titanium oxide during the titanium anodization process. The main aim of this research was to obtain photoactiv...

(This article belongs to the Special Issue Anodized Materials and Their Applications)
  • Article
  • Open Access
28 Citations
5,865 Views
16 Pages

Multi-Substrate Biofuel Cell Utilizing Glucose, Fructose and Sucrose as the Anode Fuels

  • Michał Kizling,
  • Maciej Dzwonek,
  • Anna Nowak,
  • Łukasz Tymecki and ,
  • Krzysztof Stolarczyk,
  • Agnieszka Więckowska and
  • Renata Bilewicz
  • + 2 authors+ 0 author

5 August 2020

A significant problem still exists with the low power output and durability of the bioelectrochemical fuel cells. We constructed a fuel cell with an enzymatic cascade at the anode for efficient energy conversion. The construction involved fabrication...

  • Article
  • Open Access
42 Citations
4,311 Views
16 Pages

Modification of Graphite Sheet Anode with Iron (II, III) Oxide-Carbon Dots for Enhancing the Performance of Microbial Fuel Cell

  • Babita Tripathi,
  • Soumya Pandit,
  • Aparna Sharma,
  • Sunil Chauhan and ,
  • Abhilasha Singh Mathuriya,
  • Pritam Kumar Dikshit,
  • Piyush Kumar Gupta,
  • Ram Chandra Singh,
  • Mohit Sahni and
  • Satyendra Singh
  • + 6 authors+ 1 author

13 September 2022

The present study explores the use of carbon dots coated with Iron (II, III) oxide (Fe3O4) for its application as an anode in microbial fuel cells (MFC). Fe3O4@PSA-C was synthesized using a hydrothermal-assisted probe sonication method. Nanoparticles...

(This article belongs to the Special Issue Recent Advances on Nano-Catalysts for Biological Processes)
  • Article
  • Open Access
6 Citations
3,670 Views
14 Pages

23 January 2024

Anode materials play a crucial role in the performance of microbial fuel cells (MFCs) in terms of power output. In this study, carbon nanotube (CNT)/polyaniline (PANI)/chitosan (CS) composites were prepared on a porous sponge matrix. The high electri...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)

of 14