Ti3C2Tx MXene, as a common two-dimensional material, has a wide range of applications in electrochemical energy storage. However, the surface forces of few-layer or monolayer Ti3C2Tx MXene lead to easy agglomeration, which hinders the demonstration o...
Changing electrical environments can influence the performance of herbivorous insects and adversely affect their control strategies. The diamondback moth, Plutella xylostella (L.), is a pest that devastates cruciferous vegetables. An age–stage,...
This study utilized high-voltage electrostatic field (HVEF) treatment combined with cold storage to preserve Agaricus bisporus, characterized by high water content and susceptibility to browning, cap opening, and mechanical injury. Key quality indica...
High-voltage electrostatic field (HVEF) as an emerging green technology is just at the beginning of its use in meat products and by-products processing. In this study, we employed duck oil to produce duck-oil-based diacylglycerol (DAG), termed DDAG....
Sweet cherry has a short shelf life due to the occurrence of senescence and fungal infection after harvest. This study aimed to study the effects of high-voltage electrostatic field (HVEF) on the physicochemical properties and fungal composition of s...
This study evaluated the ability of a high-voltage electrostatic field (HVEF) treatment to extend the shelf life of tomatoes. Tomatoes were exposed to HVEF treatment for different lengths of time, and the physicochemical properties of tomatoes and bi...
Three-dimensional (3D) hepatocyte models have become a research hotspot for evaluating drug metabolism and hepatotoxicity. Compared to two-dimensional (2D) cultures, 3D cultures are better at mimicking the morphology and microenvironment of hepatocyt...
Fresh jujube is prone to rapid deterioration after harvest due to its active metabolism and rich nutrients. This study aimed to investigate the effects of acidic electrolyzed water (AEW), a high-voltage electrostatic field (HVEF) and a combination of...
The purpose was to investigate the quality characteristics of dry-cured beef with different storage times under a high-voltage electrostatic field (HVEF) condition. The pH, moisture content, meat color, and volatile compounds of dry-cured beef sample...
This paper proposes a highly sensitive and high-resolution resonant MEMS electrostatic field sensor based on electrostatic stiffness perturbation, which uses resonant frequency as an output signal to eliminate the feedthrough interference from the dr...
Background/Objectives: Shashen Maidong Decoction (SMD) has a long history of use within the traditional Chinese medicine (TCM) system and is currently employed in modern clinical practice for the treatment of various diseases. The characterization of...
Electrostatic abrasive implantation technology is a classical process based on electrostatic field to implant abrasive particles into base material. However, there is still not a quantitative model to ensure the implantation performance due to the fa...
The low on-current and direct source-to-drain tunneling (DSDT) issues are the main drawbacks in the ultrascaled tunneling field-effect transistors based on carbon nanotube and ribbons. In this article, the performance of nanoscale junctionless carbon...
In this paper, a new junctionless graphene nanoribbon tunnel field-effect transistor (JLGNR TFET) is proposed as a multi-gas nanosensor. The nanosensor has been computationally assessed using a quantum simulation based on the self-consistent solution...
A new method for screening pesticide residues in vegetable and fruit juices by the multi-plug filtration cleanup (m-PFC) method combined with gas chromatography-electrostatic field orbitrap high resolution mass spectrometry(GC-Orbitrap/MS) was develo...
This study aimed to investigate the antibacterial properties and mechanisms of a high-voltage static electric field (HVEF) in Acinetobacter johnsonii, which were assessed from the perspective of biochemical properties and stress-related genes. The ti...
The electrostatic spray technology can significantly improve the utilization rate of liquid medicine under the operation characteristics of unmanned aerial vehicles (UAVs) with small load and low spray volume. To explore the settlement law of electro...
In this paper, the electrostatic discharge of solar arrays in spacecraft energy systems is taken as the research object. The influence and internal mechanism of external electromagnetic radiation on electrostatic discharge is studied. Meanwhile, the...
In addition to public health measures, including social distancing, masking, cleaning, surface disinfection, etc., ventilation and air filtration can be a key component of a multi-pronged risk mitigation strategy against COVID-19 transmission indoors...
The triboelectrification effect caused by dynamic contact between particles is an issue for explosions caused by electrostatic discharging (ESD) in the triboelectric nanogenerators (TENGs) for powering the flexible and wearable sensors. The electrost...
This study evaluates the performance of a novel high-clearance air-assisted electrostatic sprayer designed for vineyards and investigates the impact of applied voltage on droplet deposition. This sprayer, which uses a new type of air-assisted electro...
A composite nanofibrous layer containing collagen and hydroxyapatite was deposited on selected surface areas of titanium acetabular cups. The layer was deposited on the irregular surface of these 3D objects using a specially developed electrospinning...
Biomimicry is a field of research that uses the functional and structural components of nature, at macroscopic and microscopic scales, to inspire solutions to problems in our industrial world. Soft robotics is an area of research that uses biomimicry...
We present a credible mechanism of spontaneous field emitter formation in high electric field applications, such as Compact Linear Collider in CERN (The European Organization for Nuclear Research). Discovery of such phenomena opens new pathway to tam...
Electrostatic technology has emerged as a crucial tool for sustainable agricultural development due to its multifunctional characteristics. However, systematic and specialized investigations into its mechanism of action and application principles acr...
A laboratory-scale wire plate wet electrostatic precipitator was designed and constructed to investigate the particle enhancement and capture characteristics of electrostatically charged droplets in continuous atomization mode. A comparison was made...
The detailed characteristics of the harmonics emission of atoms driven via a linearly polarized laser field combined with an orthogonal, weaker electrostatic field were investigated by numerically solving the time-dependent Schrödinger equation....
The widespread use of small unmanned aerial vehicles (UAVs) has increased the need for reliable short-range detection in complex environments. Interactions between the vehicle surface, air, and suspended particles can accumulate charge and generate a...
Hybrid electrostatic precipitators consisting of electrostatic precipitation (ESP) and a bag filter are potential devices for ultralow emissions. The ESP captures and charges the particles; subsequently, the charged particles that escape enter the ba...
High-precision electrostatic accelerometers have achieved remarkable success in satellite Earth gravity field recovery missions. Ultralow-noise inertial sensors play important roles in space gravitational wave detection missions such as the Laser Int...
With the recent rapid development of cities, the dynamics of urban road-traffic commuting are becoming more and more complex. In this research, we study urban road-traffic commuting dynamics based on clustering analysis and a new proposed urban commu...
One of the primary and still unresolved problems of shotcreting is the high rebound rate of the material, which reaches over 20% in “dry” shotcreting. There is a practical need to improve the very principle of shotcreting and methods for...
20 July 2022
An influence of the electrostatic precipitator process was numerically investigated for heat transfer enhancement on saturated porous samples in a k-ε turbulent model. The condition of the water entering a test section was the inlet temperature was 3...
Global warming is the greatest challenge faced by humankind, and the only way to reduce or totally eliminate its effects is by minimizing CO2 emissions. Electrostatic precipitators are very useful as a means to reduce emissions from heavy industry fa...
With the rapid development of high-voltage DC (HVDC) power systems, accurate measurement of surface electrostatic potential on insulating components has become critical for electric field assessment and insulation reliability. This paper proposes an...
The reliability and stability of MEMS electrostatic comb resonators have become bottlenecks in practical applications. However, there are few studies that comprehensively consider the nonlinear dynamic behavior characteristics of MEMS systems and dev...
Charging potential appears when a conductor insulated to the ground is exposed to an electrostatic field. A modified measurement method based on a non-contact electrometer is presented in this article. This system is appropriate for measuring the cha...
The process of convergence and the aggregation of polyamide granules and clusters on a water surface has been studied. These granules are widely used to visualize flows on the surface and in the bulk of the water. It is shown that the law of particle...
In densely planted solar greenhouses, tomato crops face increasing challenges with pest and disease control due to high temperature and humidity conditions. The existing spraying equipment often suffers from low mechanization and inadequate foliar de...
This study explores the use of electrostatic cleaning to remove dust from the surface of photovoltaic solar panels. First of all, existing systems used for dust removal from solar panels were evaluated. Then, the effects of dust on the panel were inv...
Gas insulated transmission lines (GILs) are being used in electrical systems regarding power transmission and substation interconnection. However, operational complexities of conventional schemes, such as structural rigidity, corrosion protection, ga...
The negative air ions (NAI) are used for the removal of particles or droplets from the air. In this study, three types of piezoelectric cold plasma generators (PCPG), in combination with cylindrical electrostatic ion filters, are applied for NAI prod...
In this paper, we propose an ultrascaled WS2 field-effect transistor equipped with a Pd/Pt sensitive gate for high-performance and low-power hydrogen gas sensing applications. The proposed nanosensor is simulated by self-consistently solving a quantu...
The increasing contamination of municipal wastewater by a broad spectrum of pharmaceuticals necessitates effective quaternary treatment stages. This pilot study evaluates an innovative combined technology: physical electrostatic pretreatment (conduct...
Artificial muscles are an emerging class of actuators designed to mimic the compliant, efficient, and versatile behavior of biological muscles for fields including the following: soft robotics, prosthetics, wearable enhancements, haptic interfaces, a...
Electrostatic separation is a promising technology for the recovery of valuable metals from electronic waste, particularly from printed circuit boards (PCBs). This study explores the application of electrostatic separation for the selective recovery...
Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), a typical representative of energetic materials, is widely applied in military and industrial fields with its high energy density and excellent detonation performances. However, when used as a raw materi...
This paper is devoted to the determination of the value of the maximum specific power of capacitive electrostatic micromotors based on nanometer working gaps. The motors under consideration were developed earlier. They have the following structure: a...
Mechanical Wear particle recognition is an important approach for equipment health monitoring and fault early warning. However, flow-field disturbances and high-speed particle motion in high-speed fluid environments can lead to image degradation, non...
Waste minimization is a major way to achieve sustainable development. Electrostatic separation is already used in the recycling industry for processing certain mixtures of shredded plastics originating from waste electric and electronic equipment. St...
of 9