- Article
Starry flounder (Platichthys stellatus) (weight 96.42 ± 19.17 g, length 20.65 ± 1.04 cm) were exposed to waterborne copper at 0, 0.5, 1, 3, 6, 12, 24, and 48 mg Cu2+/L for 96 h. The lethal concentration 50 (LC50) of the P. stellatus exp...
Starry flounder (Platichthys stellatus) (weight 96.42 ± 19.17 g, length 20.65 ± 1.04 cm) were exposed to waterborne copper at 0, 0.5, 1, 3, 6, 12, 24, and 48 mg Cu2+/L for 96 h. The lethal concentration 50 (LC50) of the P. stellatus exp...
Nitrite represents one of the most typical contaminants in aqueous species. The research was conducted to evaluate the impacts of nitrite exposure on the survival, gill morphology, hematological parameters, immune response, and meat flavor of pearl g...
Beryllium is a lightweight metal that is toxic to humans. The critical health effects related to beryllium exposure are liver toxicity, immune system toxicity, and chronic beryllium disease (CBD). This study investigated the effects of occupational b...
Lead (Pb) is a non-essential toxic metal that accumulates in aquatic environments, negatively impacting fish health. This study evaluated the acute toxicity of Pb in starry flounders (Platichthys stellatus). Fish (41 ± 8.1 g, 14 ± 0.9 c...
Introduction: The mammary gland is highly sensitive to ionising radiation, making the average glandular dose (AGD) the most appropriate metric for breast dosimetry. With increasing participation in breast screening programmes, cumulative radiation ex...
Background: The purpose of this study was to validate the applicability of a new screening parameter of VPTW defined as the difference between the ascending and descending thresholds of vibrotactile perception to evaluation of the increasing risk of...
Air pollution is known to affect skin health, but tools to objectively measure individual exposure based on skin responses are limited. This study introduces the Exposure Intensity Index (EII), a novel tool that correlates lifestyle-related pollution...
22 October 2021
Monte Carlo simulation (MCS) is a computational technique widely used in exposure and risk assessment. However, the result of traditional health risk assessment based on the MCS method has always been questioned due to the uncertainty introduced in p...
The simultaneous extraction of optical navigation measurements from a target celestial body and star images is essential for autonomous optical navigation. Generally, a single optical navigation sensor cannot simultaneously image the target celestial...
Benzene, toluene, and xylenes (BTX) commonly co-exist. Exposure to individual components and BTX-rich mixtures can induce hematological effects. However, the hematological effects of long-term exposure to BTX are still unclear, and respective referen...
Chloride penetration resistance is one of the most important performance measures for the evaluation of the durability of concrete under a chloride environment. Due to differences in theory and experimental conditions, the durability index (chloride...
This paper introduces a novel model based on support vector machine with radial basis function kernel (RBF-SVM) using time-series features of zebrafish (Danio rerio) locomotion exposed to different electromagnetic fields (EMFs) to indicate the corres...
Nitrite is a common environmental pollutant in aquaculture systems, where high levels can severely impair fish physiology and survival. This study aimed to evaluate the acute toxicity of waterborne nitrite in starry flounder (Platichthys stellatus)....
Cold exposure is an unavoidable stressor in cold regions, leading to growth retardation, oxidative damage, and endocrine disruption. This study investigated changes in blood parameters and antioxidant function in the brown adipose tissue (BAT) of mic...
Accurately determining the exposure time to an infectious pathogen, together with the corresponding incubation period, is vital for identifying infection sources and implementing targeted public health interventions. However, real-world outbreak data...
When high-strength steel is heated to high temperatures and then cooled naturally, its ductility decreases. In earthquake-prone areas, it is necessary to evaluate the ultra-low cycle fatigue fracture (ULCF) behavior of high-strength steel structures...
The current study aimed to investigate the relationship between body parameters and the current–time product (mAs) in chest digital radiography using a non-contact infrared thickness-measurement sensor. An anthropomorphic chest phantom was firs...
Background: According to the Lyon Consensus 2.0, acid exposure time (AET) greater than 6% is considered definitive evidence of pathological reflux, while mean nocturnal baseline impedance (MNBI) serves as supportive evidence. Given the limitations in...
Ciguatera is a foodborne disease caused by ciguatoxins (CTXs), produced by dinoflagellates (genera Gambierdiscus and Fukuyoa), which bioaccumulate in fish through the food web, causing poisoning in humans. Currently, the physiological mechanisms of t...
The seismicity of the National Capital Region (NCR) of India increased significantly over the last decade. Communities in the NCR face significant exposure to damaging seismic events, and the seismic risk arises not only from the region’s proximity t...
Poor breathability, inadequate flexibility, bulky wearability, and insufficient gas-adsorption capacity always limit the developments and applications of conventional chemical protective clothing (CPC). To create a lightweight, breathable, and flexib...
Among microorganisms found in food, fungi stand out because they are adaptable and competitive in a large range of water activities, temperatures, pHs, humidities and substrate types. Besides sporulating, some species are toxigenic and produce toxic...
The requirements and specifications of food packaging materials are continuously increasing, e.g., due to new regulations. Selection of a proper material is a multi-criteria decision, and various aspects must be considered. In this work, a simple met...
Benzene is harmful to human health and early detection of haematological alterations is important in preventing adverse health effects. This study aimed to investigate the biomarkers of benzene exposure and its effects due to haematological alteratio...
Since the establishment of regulations for exposure to extremely low-frequency (0–300) Hz electromagnetic fields, scientific opinion has prioritised the hypothesis that the most important parameter determining cellular behaviour has been intens...
Minimal inhibitory concentration-based pharmacokinetic/pharmacodynamic (PK/PD) indices are commonly applied to antibiotic dosing optimisation, but their informative value is limited, as they do not account for bacterial growth dynamics over time. We...
15 October 2021
Exposure to insecticides may result in various health problems. This study investigated the association between haematological parameters and exposure to a mixture of organophosphate (OP) and neonicotinoid (NEO) insecticides among male farmworkers in...
Metabolic syndrome (MS) is a multifactorial disease entity and is not fully understood. Growing evidence suggests that early exposure to bisphenol A (BPA) is a significant risk factor for the development of metabolic diseases. BPA is a monomer used i...
Cadmium (Cd) is a non-essential trace element that poses significant toxic effects on fish. This review focuses on hematological and plasma biochemical parameters as key indicators of fish health under Cd exposure. Hematological parameters, such as r...
Introduction: Active transport is encouraged by the Uruguayan authorities; however, the criteria for expanding the cycling routes are unclear. This article presents a research project aiming to examine statistically significant links between environm...
Combined effects of reduced pH, as predicted under climate change scenarios, and the most popular and widely used stimulant caffeine were assessed in hemocyte parameters of the mussel Mytilus galloprovincialis, being hemocytes involved in immune defe...
Aflatoxin B1 (AFB1) is the most common toxic mycotoxin that contaminates food. The treatment of its intoxication and the management of contaminations are a constant subject of health agendas worldwide. However, such efforts are not always enough to a...
Copper’s high thermal and electrical conductivity enables its application in heat exchangers and high-frequency components. For those applications, additive manufacturing has advantages with respect to functional integration, miniaturization, a...
Oxidative stress (OS) contributes to the neurological and cardio/pulmonary effects caused by adverse metabolic states and air pollutants such as ozone (O3). This study explores the interactive effects of O3 and diet (high-fructose (FRUC) or high&ndas...
Background/Objectives: Chemical and carcinogenic risk in workplace are linked to an increase of the incidence of cancer in exposed workers. The aim of this observational study was to identify an association between exposure to chemical risk and chang...
The effects of extremely low-frequency electromagnetic field (ELF-MF) exposure on living systems have been widely studied at the fundamental level and also claimed as beneficial for the treatment of diseases for over 50 years. However, the underlying...
This study was carried out to evaluate the effect of ensiling sorghum silage with urea and amending the aerobic exposure nutrients intake and apparent digestibility, ingestive behaviour and blood serum metabolites of feedlot lambs. Forty uncastrated...
Preclinical research has provided compelling evidence indicating that exposure to hypobaric hypoxia (HH) results in a deterioration of spermatogenesis. This adverse effect extends to the underlying molecular mechanisms, progressively leading to impai...
Background: Awkward postures are among the most prevalent ergonomic risk factors in occupational environments, including industrial settings. Conventional ergonomic risk assessments rarely address the relationship between sustained awkward postures a...
Liquid-assisted laser processing (LALP) is implemented using a 10.6 μm continuous-wave (CW) CO2 laser to drill holes in 1.1 mm thick soda-lime glass substrates fully immersed in a nanoliquid bath. The nanoliquid bath consisted of de-ionized water...
The Laser Beam Melting (LBM) Additive Manufacturing technology for metal processing is based on the local application of an intense laser beam, causing a characteristic microstructure, which can achieve higher mechanical properties than conventionall...
NPs have become a concerning global environmental problem. Dietary exposure to NPs can cause microbial dysbiosis. However, the risks of NPs to animals, particularly poultry species such as chickens, remain poorly understood. In this study, chickens w...
There is a limited research focus on evaluating the detrimental effects of prolonged zearalenone (ZEN) intake on dairy cows’ health under controlled conditions. This experiment was conducted to evaluate whether the length of exposure to a ZEN-c...
We studied the potential role of exposure to various metal(oid)s (As, Cd, Cr, Hg, Ni, and Pb) in prostate cancer. Two cohorts were established: the Croatian cohort, consisting of 62 cases and 30 controls, and the Serbian cohort, consisting of 41 case...
The study aimed to assess the association of long-term pesticide exposure (≥5 years) with hematological, serum biochemical parameters and acetylcholinesterase activity in farm workers. These pesticides included organophosphorus pesticides, carbamates...
This study aims to quantify the influence of hue, value and opacity on the variation in light transmittance of a full color palette of an ormocer-based dental composite. Samples with a thickness of 2 mm were cured in real time while the incident irra...
14 November 2021
COVID-19 created an unprecedented global public health crisis during 2020–2021. The severity of the fast-spreading infection, combined with uncertainties regarding the physical and biological processes affecting transmission of SARS-CoV-2, posed enor...
20 December 2021
Leveraging social influence is an increasingly common strategy to change population behavior or acceptance of public health policies and interventions; however, assessing the effectiveness of these social network interventions and projecting their pe...
Newcastle disease is a devastating poultry disease that often causes significant economic losses in poultry in the developing countries of Africa, Asia, as well as South and Central America. Velogenic Newcastle disease virus (NDV) outbreaks are assoc...
18 February 2023
A growing body of evidence indicates that living close to nature is associated with better health and well-being. However, the literature still lacks studies analyzing the benefits of this proximity for sleep and obesity, particularly in women. The p...
of 108