- Article
The use of solar photovoltaic systems for power generation requires efficient battery energy storage systems to ensure a steady and constant supply for self-sufficient power generation and off-grid areas. “Vision 2030” is Saudi Arabia&rsq...
The use of solar photovoltaic systems for power generation requires efficient battery energy storage systems to ensure a steady and constant supply for self-sufficient power generation and off-grid areas. “Vision 2030” is Saudi Arabia&rsq...
Reducing carbohydrate (CHO) intake is being used as an approach to manage type 1 diabetes (T1D) in children. This study aimed to investigate the experiences and attitudes of parents of children with T1D who are reducing CHO intake to help manage bloo...
In the last years, a shift in the promotion of sustainable development in Higher Education from a focus on universities’ core areas of teaching and research to “whole institution approaches” with an emphasis on the operational manag...
Unidirectional compressive properties of magnetorheological (MR) fluids have been investigated under slow compression and constant area with different magnetic fields and different initial gap distances. Experimental tests of unidirectional compressi...
A five-dimensional hyperchaotic system is a dynamical system with five state variables that exhibits chaotic behavior in multiple directions. In this work, we incorporated a 5D hyperchaotic system with constant- and variable-order Caputo and the Capu...
The influence of key design parameters on the constant force characteristics of long-stroke moving-iron proportional solenoid actuators (MPSAs) has been explored by a method combining finite element modelling and correlation analysis. First, the fini...
A detailed study of the gas-dynamic behaviour of both liquid and gas flows is urgently required for a variety of technical and process design applications. This article provides an overview of the application and an improvement to thermal anemometry...
To explore the relationship between fuel consumption and speed for a vehicle on a superhighway with a design speed exceeding 120 km/h, the fuel consumption data provided by the Test of Easy Car platform are used to fit the fuel consumption of differe...
In applications with a wide constant power speed range, the use of conventional permanent magnet machines is complicated by their uncontrolled magnetic flux, increased losses at high speeds, increased inverter current, and dangerous open circuit back...
This study presents a comparative analysis of fatigue crack growth (FCG) in four high-performance crystalline metallic alloys: Inconel 718, Ti-6Al-4V, Aluminum 7075-T6, and ASTM A514 Steel. The Finite Element Method was utilized to simulate crack pro...
In this study, a steady-state thermodynamic equilibrium evaluation of CO2 methanation was conducted. Calculations were performed by solving the material balance equations using the equilibrium constants of CO2 methanation and reverse water–gas...
Background/Objectives: To evaluate the advanced lens measurement approach (ALMA) formula accuracy using different lens constants available on the user group for laser interference biometry (ULIB) and IOL Con platforms. Methods: In this retrospective,...
The accurate determination of acid/base constants (proton dissociation constants—pKa, or equivalently protonation constants—logK) is essential for the physicochemical characterization of new molecules, especially in drug design and develo...
This article provides a novel approach to the traditional constant market share (CMS) analysis recognizing the importance of global production networks and fragmentation that necessitate using trade in value added (TiVA) rather than gross trade. We d...
Damage models, particularly the Gurson–Tvergaard–Needleman (GTN) model, are widely used in numerical simulation of material deformations. Each damage model has some constants which must be identified for each material. The direct identification metho...
(1) Background: A large number of studies have used different psychophysical methods for measuring temporal order judgment (TOJ) thresholds, which makes it difficult to compare the results of different studies. In this study, we aimed to compare the...
This paper presents an automatic optimization method for compliant constant force mechanisms, which eliminates the need for time-consuming parameter tuning and complex model design in the conventional design process. The proposed optimization framewo...
By combining the Fourier series expansion method with the perfect matching layer strategy, this study provides a detailed analysis of symmetric periodic chains consisting of two-dimensional monolayer dielectric cylinders. The numerical and field dist...
2 February 2026
An investigation was conducted into the effectiveness of heat shields in an aero-engine compressor casing to slow down thermal time constants. The investigation used a combination of experimental measurements from a full-size compressor casing rig, c...
Equivalent energy consumption minimization methods of energy management systems have been implemented as a rule-based strategy to enhance electric propulsion system efficiency. This study compares the efficiencies of different systems by applying var...
This paper presents the modelling and dynamic analysis of a Virtual Synchronous Generator (VSG) operating under three representative load models: constant impedance (Z), constant power load (CPL), and composite ZIP (constant impedance, constant curre...
In South Korea, since small forest catchments are located upstream of most river basins, the baseflow from these catchments is important for a clean water supply to downstream areas. Baseflow recession analysis is widely recognized as a valuable tool...
Fiber-reinforced composite materials exhibit orthotropic behavior, characterized by complex orthotropic engineering constants such as Young’s modulus, Poisson’s ratio, and shear modulus. It is widely recognized that basalt fibers possess...
The organic Rankine cycle (ORC) has been demonstrated to be an effective method for converting low-grade heat energy into electricity. This paper proposes an improved analysis method for the ORC system. A coupling model of the ORC system with a radia...
This study focuses on using constant and ramp cyclic processes to evaluate the performance of acrylonitrile–butadiene–styrene (ABS) copolymer with electron beam irradiation cross-linking. The main objective of this study is to compare the...
In this study, the characteristic analysis of a permanent magnet synchronous generator was performed using the analytical method, and the validity of the analytical method was compared with that of the finite element method (FEM). For the initial des...
In this paper, we propose a new method to study and evaluate the time-varying brain network dynamics. The proposed RICI-imCPCC method (relative intersection of confidence intervals for the imaginary component of the complex Pearson correlation coeffi...
Complex dielectric constant (CDC) of bound water determines the accuracy of the complex dielectric constant of wet soil. According to electrical double-layer structure and dielectric properties, the bound water on clay particle surface is divided int...
The harmonic constants of long-period tidal constituents are critical for simulating the tide process, obtaining theoretical datum sounding reduction, and conducting further ocean research. In this paper, the equidistant node orthogonal polynomial fi...
Fractional-order controllers have emerged as robust alternatives to conventional PID controllers. Existing tuning methods generally focus solely on robustness to process gain variations. This paper introduces a design method for fractional-order PI c...
In this study, we measured and characterized the relative dielectric constant of mineral soils over the 0.3–3.0 frequency range, and compared our measurements with values of three dielectric constant simulation models (the Wang, Dobson, and Mir...
The proposed broadband attached proton test sequence allows the user to easily record 13C nuclear magnetic resonance multiplicity-edited and quaternary-carbon-only spectra. Compared to earlier attached proton test experiments, it preserves both a tol...
The change in material dimensional will lead to the decline of instrument accuracy and reliability. In this paper, the characterization and analysis of the lattice constant, precipitates, and dislocation density of the material by X-ray diffraction (...
The combined Coulomb constant shear friction law is widely used in commercial and research software for the finite-element analysis (FEA) of metalworking and is naturally more flexible and hence, more relevant to real-life manufacturing than the indi...
The massive increase in disposable plastic globally can be addressed through effective recovery methods, and one of these methods is pyrolysis. R software may be used to statistically model the composition and yield of pyrolysis products, such as oil...
Temperature and pressure changes can introduce substantial bias when a tunable diode laser absorption spectroscopy calibration is used away from its reference condition. Here, scanned wavelength modulation spectroscopy (WMS), fixed-wavelength MS (FWM...
Evidence based practice enhances healthcare delivery and prevents unsafe procedures. While competency based assessments of resident cataract surgery are standard, evidence based analysis of refractive outcomes remains underutilized in educational cur...
Focusing on the low energy-storage efficiency and unstable energy output of existing accumulators, this paper proposes a novel constant-pressure elastic-strain energy accumulator based on the rubber material hyperelastic effect. The proposed accumula...
The objective of this paper is to carry out response analyses of eight floating wind turbines and compare them together; this is something that is not seen in previous research papers. From this perspective, this paper will compare the response offse...
An analysis was carried out on the thermal dissociation of selected inorganic salts according to Transition-State Theory (TST). For this purpose, two possibilities were compared in the context of rate constants: in the first case using the Arrhenius...
The application of fractional calculus to obtain dynamic models for supercapacitors represents an alternative approach to obtaining simpler and more accurate models. This paper presents a model for the supercapacitor in the time domain, based on the...
Chestnut shell-based activated carbon was prepared with chestnut shell as the raw material and ZnCl2 as the activating agent. Based on thermodynamic parameters, the adsorption behavior of methylene blue (MB) on chestnut shell-based activated carbon w...
The three-dimensional structure of monomers and homodimers of CYP102A1/WT (wild-type) proteins and their A83F and A83I mutant forms was predicted using the AlphaFold2 (AF2) and AlphaFold Multimer (AFMultimer) programs, which were compared with the ra...
Data scarcity plays the crucial role in hydrological modeling, causing the uncertainties in hydrological model calibration and parameterization. Therefore, while considering the sensitivity of the parameter optimization, it is essential to determine...
There are a plethora of semi-local convergence results for Newton’s method (NM). These results rely on the Newton–Kantorovich criterion. However, this condition may not be satisfied even in the case of scalar equations. For this reason, w...
Traditionally, the usual multipliers are used to multiply signals by a constant, but multiplication by a constant can be considered as a special operation requiring the development of specialized multipliers. Different methods are being developed to...
The present study aimed to compare the accuracy of intraocular lens calculation formulas Barrett Universal II, Hoffer Q, Holladay 1, and SRK/T in the prediction of postoperative refraction for two widely used monofocal implants: SN60WF and ZCB00. All...
This study focuses on the phenol biodegradation kinetics by Stenotrophomonas maltophilia KB2 in a nickel-contaminated medium. Initial tests proved that a nickel concentration of 33.3 mg·L−1 caused a cessation of bacterial growth. The experiments were...
The influence of acoustic anisotropy on ultrasonic testing reliability poses a challenge in evaluating products from additive technologies (AT). This study investigates how elasticity constants of anisotropic materials affect defect signal amplitudes...
In the field of reliability analysis, the constant-stress accelerated degradation test is one of the most commonly used methods to evaluate a product’s reliability as degradation data are provided. In this paper, a constant-stress accelerated d...
of 51