- Article
This paper examines the influence of the empirical material coefficient on the propagation of plane waves in a one-dimensional isotropic thermoelastic lamina with temperature-dependent material properties. Lamé’s parameters and thermal c...
This paper examines the influence of the empirical material coefficient on the propagation of plane waves in a one-dimensional isotropic thermoelastic lamina with temperature-dependent material properties. Lamé’s parameters and thermal c...
Boron carbide plays a crucial role in various extreme environment applications, including thermal barrier coatings, aerospace applications, and neutron absorbers, because of its high thermal and chemical stability. In this study, the temperature-depe...
Systematic investigations are performed to understand the temperature-dependent optical properties of graphene on Si and SiO2/Si substrates by using a variable angle spectroscopic ellipsometry. The optical constants of graphene have revealed changes...
The heat transfer performances of ionic liquids [C4mpyrr][NTf2] and ionanofluids with Al2O3 nanoparticles under a laminar flow regime, and with constant heat flux on the tube wall is numerically modeled and analyzed for three values of initial/inlet...
Explicit expressions are obtained for sensitivity coefficients to separately estimate temperature-dependent thermophysical properties, such as specific heat and thermal conductivity, in two-dimensional inverse transient heat conduction problems for b...
Thermal conductivity, λ, and volumetric heat capacity, ρcp, variables that depend on temperature were simultaneously estimated in a diverse technique applied to AISI 1045 and AISI 304 samples. Two distinctive intensities of heat flux were imposed to...
Previous studies have often assumed that the mechanical properties of Carbon Fibre Reinforced Plastics (CFRP) remain unchanged during drilling. In fact, due to the increase in drilling temperature, the mechanical properties of the composites change g...
The reliability of hygrothermal models depends on the quality of their inputs. Conventionally, thermal and moisture properties are treated as temperature-independent, yet previous studies have shown that many of these properties are temperature-depen...
This paper presents an analytical investigation of the free vibration behavior of fiber metal laminate (FML) beams with three types of boundary conditions, considering the temperature-dependent properties and the interfacial slip. In the proposed mod...
In this work, gradient-sized Pr6O11 powders were fabricated via a wet ball-milling method with variable milling durations. The microstructural evolution and temperature-dependent magnetic properties of different Pr6O11 powders were systematically inv...
Temperature heavily affects the behavior of any energy storage chemistries. In particular, lithium-ion batteries (LIBs) play a significant role in almost all storage application fields, including Electric Vehicles (EVs). Therefore, a full comprehensi...
Single-walled carbon nanotube (SWCNT) is a promising candidate for strengthening nanocomposite. As the matrix of nanocomposite, a single crystal of copper is designed to be in-plane auxetic along the crystal orientation [1 1 0]. In that way, the nano...
Elastoplastic analysis of a composite cylinder, consisting of an isotropic elastic inclusion surrounded by orthotropic matrix, is conducted via numerical parametric studies for examining its residual stress under thermal cycles. The matrix is assumed...
This work applies the first-order shear deformation theory (FSDT) to study the dynamic stability of orthotropic temperature-dependent single-layered graphene sheet (SLGS) embedded in a temperature-dependent elastomeric medium and subjected to a biaxi...
This work aims to estimate temperature-dependent thermal conductivity and heat capacity given measurements of temperature and heat flux at the boundaries. This estimation problem has many engineering and industrial applications, such as those for the...
The metal–insulator transition of vanadium dioxide (VO2), a phase change material, has been utilized for various applications. The characterization of the VO2 thin film structure, in both its optical properties and thickness, remains a critical...
The Fused Filament Fabrication (FFF) process has established itself as a key technology in prototyping and development and has garnered increasing interest in academic research. A substantial body of research on the FFF process has focused on the inf...
This work presents analytical solutions for thermoelastic behaviors of multilayer arches with temperature-dependent (TD) thermomechanical properties under thermomechanical loadings. The temperature is varied across the thickness of the arch. Firstly,...
This paper presents temperature-dependent properties and fire resistance of geopolymer foams made of ground basalt fibers, aluminum foaming agents, and potassium-activated metakaolin-based geopolymers. Temperature-dependent properties of basalt-reinf...
In this work, metal halide perovskite quantum dots (QDs) with Formamidinium (FA) and Cs mixed cations were fabricated using a solution-processed method at room temperature. By controlling Cs doping ratios in a precursor, the optical properties of mix...
Hydrogenated amorphous SiC (a-SiC:H) films with various Si/C ratios were prepared using the plasma-enhanced chemical vapor deposition (PECVD) technique. These films were then subjected to thermal annealing at different temperatures to induce crystall...
Silicon carbide (SiC) is a representative wideband-gap semiconductor with remarkable properties, such as high breakdown field strength, high thermal conductivity, and high carrier saturation mobility. Meanwhile, single-photon emitters (SPEs) in SiC h...
This study reports the influence of different climatic ambient temperatures on the thermal properties of fiber-reinforced lightweight aggregate concrete (LWAC). Lightweight expanded clay aggregates (LECA) with steel (ST) and polypropylene fibers were...
Noninvasive in situ monitoring of viscoelastic characteristics of corneal tissue at elevated temperatures is pivotal for mechanical property-informed refractive surgery techniques, including thermokeratoplasty and photorefractive keratectomy, requiri...
It is becoming more important for electronic devices to operate stably and reproducibly under harsh environments, such as extremely low and/or high temperatures, for robust and practical applications. Here, we report on the effects of atomic-layer-de...
The material properties of thermoplastic polymer parts manufactured by the extrusion-based additive manufacturing process are highly dependent on the thermal history. Different numerical models have been proposed to simulate the thermal history of a...
Relaxor [011]c PMN-0.35PT single crystal phase transition characteristics are investigated through various methods including variable temperature dielectric properties, X-ray diffraction, bipolar ferroelectric hysteresis loops (P-E) and electric-fiel...
At present, with the development in nanotechnology, nanostructures with temperature-dependent properties have been used in nano-electromechanical systems (NEMS). Thus, introducing an accurate mathematical model of nanobeams with temperature-dependent...
This article describes an aging study of a foam-vacuum insulation panel (VIP) composite insulation board installed on a test wall in a natural exposure test facility through a 30-month period. Silica-based VIPs with a polymeric barrier film were used...
Recent global efforts to produce lightweight electrified vehicles have motivated the push toward advanced lightweight materials which led to the creation of novel alloys optimized for use in high-pressure die casting (HPDC). HPDC enables the fabricat...
In this paper, Berkovich depth-sensing indentation has been used to study the effects of the temperature-dependent quasi-static mechanical properties and creep deformation of heat-treated wood at temperatures from 20 °C to 180 °C. The characteristics...
Polymer concretes with fiber reinforcement have many desirable properties when compared to cementitious concretes, including rapid development of mechanical properties, excellent bond to concrete and other substrates, high tensile strength, and resis...
Porous functionally graded material (FGM) sandwich beams combine ceramic heat resistance with metal toughness, but their through-thickness grading and porosity make their response in thermal environments sensitive to modelling assumptions. This paper...
Optical fiber sensors have been potentially expected to apply in the extreme environment for their advantages of measurement in a large temperature range. The packaging measure which makes the strain sensing fiber survive in these harsh conditions wi...
This article presents a mathematical continuum model to analyze the free vibration response of cross-ply carbon-nanotube-reinforced composite laminated nanoplates and nanoshells, including microstructure and length scale effects. Different shell geom...
Organic/inorganic hybrid perovskite materials, such as CH3NH3PbX3 (X = I, Br), have attracted the attention of the scientific community due to their excellent properties such as a widely tunable bandgap, high optical absorption coefficient, excellent...
To lessen quenching residual stresses in aluminum alloy components, theory analysis, quenching experiments, and numerical simulation were applied to investigate the influence of temperature-dependent material properties on the evolution of plastic st...
The structure and the chemical composition of individual layers as well as of interfaces belonging to the two heterostructures M1 (BaFe12O19/YbFeO3/YSZ) and M2 (YbFeO3/BaFe12O19/YSZ) grown by pulsed laser deposition on yttria-stabilized zirconia (YSZ...
Semiconductor colloidal nanoplatelets (NPLs) are a promising new class of nanostructures that can bring much impact on lightning technologies, light-emitting diodes (LED), and laser fabrication. Indeed, great progress has been made in optimizing the...
Composite laminated structures, comprising various engineering materials, are extensively utilized in engineering structures due to their superior design flexibility and enhanced mechanical performance. This study investigates the mechanical behavior...
Temperature-dependent and threshold behavior of Sm3+ ions on fluorescence properties of lithium niobate (LiNbO3, LN) single crystals were systematically investigated. The test materials, congruent LiNbO3 single crystals (Sm:LN), with various concentr...
Bi4Ti2.99Mn0.01O12 (BTM) thin films with different ratio of neodymium (Nd) doping were prepared on Pt(111)/Ti/SiO2/Si(100) substrates through a sol-gel method. The effects of Nd doping on domain dynamics and temperature-dependent fatigue behaviors of...
This study investigates the free vibration behaviors of functionally graded (FGM) plates with a porous structure, resting on a Kerr-type elastic foundation, while accounting for thermal effects and complex material property distributions. Within the...
This article is devoted to the mathematical analysis of a heat and mass transfer model for the pressure-induced flow of a viscous fluid through a plane channel subject to Navier’s slip conditions on the channel walls. The important feature of o...
Water interacting with clay minerals—such as kaolinite, montmorillonite, and pyrophyllite—fundamentally governs their geotechnical and environmental functions, thereby influencing parameters such as retention, transport, and stability. Un...
Thermoelectric generators are devices that transform thermal energy into electric energy. These devices play an influential role in our constantly developing civilization due to their energy conversion capabilities and advantages over other conventio...
Temperature-induced instability in early-age rheology poses a major challenge to the pumpability and application of robotic plastering mortars. This study systematically investigates the temperature-dependent effects of a high-viscosity (75,000 mPa&m...
In this work, the influences of the Thomson effect and the geometry of the p-type segmented leg on the performance of a segmented thermoelectric microcooler (STEMC) were examined. The effects of geometry and the material configuration of the p-type s...
Background and Purpose: Nanofluids are a new class of heat transfer fluids that are used for different heat transfer applications. The transport characteristics of these fluids not only depend upon flow conditions but also strongly depend on operatin...
In this study, vanadium oxide (VxOy) semiconducting resistive thermometer thin films were developed, and their temperature-dependent resistive behavior was examined. Multilayers of 5-nm-thick vanadium pentoxide (V2O5) and 5-nm-thick vanadium (V) film...
of 121