This work synthesized Pt-doped dye-sensitized solar cells (DSSC) with different molar ratios and thicknesses. The materials were revealed fully through X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), and transmission electron microscop...
The aim of this study was to produce a coating for protective glass glued to touch displays with high antibacterial effectiveness. This paper presents the structural, mechanical, optical, and antibacterial properties of a TiO2:Ag–Pt coating pre...
Ethanol and pentose were produced from lignocellulosic napiergrass by the simultaneous saccharification and fermentation process (SSF) using hydrolytic enzyme and S. Cerevisiae. After the ethanol was removed, the pentose solution was subjected to pho...
In this work, the photocatalytic reduction of CO2 was innovatively tested with the simultaneous removal and mineralization of a textile contaminant, methylene blue (MB), which acts as a sacrificial agent. The process was carried out in a flow regime...
Human noroviruses (HuNoVs) are among the main causes of acute gastroenteritis worldwide. HuNoVs can survive for several days up to weeks at room temperature in the environment, on food, and on food handling and processing surfaces. As a result, this...
A research and technological challenge for fuel processors integrated with High Temperature Polymer Electrolyte Membrane Fuel Cells (HT-PEMFCs), also known as Internal Reforming Methanol Fuel Cells (IRMFCs), operating at 200–220 °C, is the...
[011] poled relaxor-PT single crystals provide superior piezoelectric constants and electromechanical coupling factors in the 32 crystal directions, and also exhibit high electrical stability under compressive stresses and temperature changes. In par...
In recent years, metal nanoclusters (NCs) with atomic-scale precision have emerged as novel photosensitizers for light energy conversion in metal cluster-sensitized semiconductor (MCSS) systems. However, conventional NCs often suffer from photodegrad...
Au@Pt@Au core-shell nanoparticles, synthesized through chemical reduction, are utilized to improve the photoelectric performance of perovskite solar cells (PSCs) in which carbon films are used as the counter electrode, and the hole-transporting layer...
Bio-fuelization of herbaceous lignocelluloses through a simultaneous saccharification and fermentation process (SSF) and photocatalytic reforming (photo-Reform) was examined. The SSF of the alkali-pretreated bamboo, rice straw, and silvergrass was p...
Photocatalytic H2 evolution was examined using Pt-loaded TiO2-photocatalyst in the presence of amines as sacrificial agents. In the case of amines with all of the carbon attached to the hetero-atom such as 2-aminoethanol, 1,2-diamonoethane, 2-amino-...
7 April 2021
New materials are obtained by transforming fly ash wastes into a valuable composite, with tandem adsorption and photodegradation properties. Mild hydrothermal synthesis, from titanium dioxide, platinum nanoparticles and zeolite materials obtained fro...
Hydrogen (H2) is considered as an ideal fuel for the future. The photo-electrochemical (PEC) water splitting employing semiconducting materials and induced irradiation, preferably of solar spectrum, presents a viable route for H2 production. In this...
The application potential of Pt/Ti4O7 has been reported, but the lack of research on the relationship between Pt loading, MSI, and catalytic activity hinders further development. Micron-sized Ti4O7 powders synthesized by a thermal reduction method un...
The conventional wastewater treatments are inadequate for emerging contaminants detoxification. Photocatalytic ozonation with suitable catalyst can be considered as a suitable solution on the removal of these compounds. The aim of this study was to v...
In this paper, the electrothermal coupling model of metal oxide resistive random access memory (RRAM) is analyzed by using a 2D axisymmetrical structure in COMSOL Multiphysics simulation software. The RRAM structure is a Ti/HfO2/ZrO2/Pt bilayer struc...
This paper presents the synthesis of La2Ti2O7 nanoparticles by the sol–gel method starting from lanthanum nitrate and titanium alkoxide (noted as LTA). Subsequently, the lanthanum titanium oxide nanoparticles are modified with noble metals (pla...
Application of solar photocatalysis for water treatment is intensively studied. In this work, we investigated TiO2 modified with platinum (Pt/TiO2) and palladium (Pd/TiO2) using sulfamethoxazole (SMX) as the model contaminant. We considered the follo...
The type of metal oxide affects the activity and selectivity of Fe2O3–SiO2–MeO2–Pt (Me = Ti, Sn, Ce) catalysts on the hydrogenation of cinnamaldehyde. The double shell structure design is thought to protect the magnetic Fe2O3 cores,...
The composites of transition metal-doped titania and carbon have emerged as promising supports for Pt electrocatalysts in PEM fuel cells. In these multifunctional supports, the oxide component stabilizes the Pt particles, while the dopant provides a...
CO-sensing properties of diode-type sensors employing an anodized TiO2 film and noble-metal (M) electrodes (M/TiO2 sensor, M: Pd, Pt, and Pd-nPt, n: the amount of Pt (wt %) in the Pd-nPt electrode) were investigated at 50–250 °C in dry or wet H2. All...
If piezoelectric thin films sensors based on K0.5Na0.5NbO3 (KNN) are to achieve commercialization, it is critical to optimize the film performance using low-cost scalable processing and substrates. Here, sol–gel derived KNN thin films are depos...
Pt coatings on NiTi film micro-actuators and/or sensors can add some useful properties, e.g., they may improve the NiTi anticorrosion and thermomechanical characteristics or activate surface properties beneficial for a specific application (e.g., fun...
Direct liquid fuel cells are very appealing alternatives for fighting climate change, particularly in the field of personal mobility solutions. This is especially true for direct methanol fuel cells (DMFCs) that use and burn safe fuels that are readi...
A series of nanostructured Pt-Au/MOx-CeO2 (M = Mn, Fe, Ti) catalysts were prepared and their catalytic performance for the co-oxidation of carbon monoxide (CO) and hydrogen (H2) were evaluated at room temperature. The results showed that MOx promoted...
Acute lymphoblastic leukemia (ALL) represents the most common type of cancer in the pediatric population. The (1;19)(q23;p13) translocation is a primary chromosomal abnormality present in 3–12% of ALL cases. The current study aims to develop a...
Dopamine detection by using N2/O2 annealing in a Pt/Ti/n-Si structure is investigated for the first time. To achieve repeatable and stable dopamine detection, a Pt membrane is annealed at elevated temperatures of 500 to 700 °C. N2/O2 gas ambient...
Novel Pt/Bi3.4Gd0.6Ti3O12 heterojunction was synthesized by a decoration of Pt nanoparticles (PtNPs) on the surface of piezoelectric Bi3.4Gd0.6Ti3O12 (BGTO) through an impregnation process. The photocatalytic, piezo-catalytic, and piezo-photocatalyti...
Bone tissue is the second tissue to be replaced. Annually, over four million surgical treatments are performed. Tissue engineering constitutes an alternative to autologous grafts. Its application requires three-dimensional scaffolds, which mimic huma...
Interfacial electron injection from a photoexcited surface-immobilized dye to a semiconductor substrate is a key reaction for dye-sensitized photocatalysts. We previously reported that the molecular orientation of heteroleptic Ir(III) photosensitizer...
Liquid organic hydrogen carriers (LOHCs) are promising materials for safe, reversible, and high-density hydrogen storage. Atomically dispersed bimetallic Pt–Sn nanocluster catalysts supported on TiO2 (Pt–Sn/TiO2) were developed to enhance...
BaTiO3 (BTO), a lead-free chalcogenide ferroelectric material, has emerged as a promising candidate for ferroelectric memories due to its advantageous ferroelectric properties, notable flexibility, and mechanical stability, along with a high dielectr...
In this contribution, four different commercial TiO2 catalysts (P25, P90, PC105, and PC500) were screened for the photocatalytic production of hydrogen using ethanol as the sacrificial agent. The physico-chemical properties of the TiO2 powders were c...
Photocatalytic hydrogen production through ethanol photo-reforming using Na2Ti3O7 whiskers increases if the sodium titanate is decorated with well-known metallic catalysts such as Ni and Pt. Whereas wet impregnation with nickel gives only a slight in...
Formaldehyde, a pervasive indoor air pollutant posing significant health risks, has driven extensive research into advanced mitigation strategies to ensure safer living environments. Herein, this study presents a synthesis method for the large-scale...
Compared with Pt/TiO2, tungsten-loaded Pt–W/TiO2 catalysts exhibit improved activity for NO and soot oxidation. Using catalysts prepared by an incipient wetness method, the tungsten loading effect was investigated using Brunauer–Emmett&nd...
The photocatalytic reduction of carbon dioxide (CO2) into value-added chemicals is considered to be a green and sustainable technology, and has recently gained considerable research interest. In this work, titanium dioxide (TiO2) supported Pt, Pd, Ni...
V0.5/Pt/TiO2 tandem catalysts exhibit both an outstanding low-temperature NH3 conversion rate and high N2 selectivity in NH3-SCO reactions, but the mechanism of high N2 selectivity remains unclear. In this work, Vx/Pt/TiO2 tandem catalysts were synth...
In recent years, several materials and metal-insulator-metal devices are being intensively studied as prospective non-volatile memories due to their resistive switching effect. In this work, thickness-dependent resistive switching polarity was observ...
It has been found that the electrocatalytic properties of metallic nanoparticles supported on transition metal oxides are affected by the existing strong metal–support interaction (SMSI). Herein, the effects of SMSI on the electrocatalysis of t...
Separating the redox centers of photocatalysts is the most promising strategy to enhance photocatalytic oxidation efficiency. Herein, I investigate a site-selective loading of Pt on facet-engineered TiO2 to achieve carbon monoxide (CO) oxidation at r...
Au-Pt-Ti/high-k/n-InAlAs metal-oxide-semiconductor (MOS) capacitors with HfO2-Al2O3 laminated dielectric were fabricated. We found that a Schottky emission leakage mechanism dominates the low bias conditions and Fowler–Nordheim tunneling became the m...
Gas-solid heterogeneous photooxidation of toluene over TiO2 catalyst was studied to investigate the factors controlling the catalytic activities. The toluene photooxidation behavior on TiO2 was strongly affected by the formation and oxidation behavio...
Catalysts increase reaction rates; however, the surface area to volume ratio of catalysts has a vital role in catalytic activity. The noble metals such as platinum (Pt) and gold (Au) are expensive; despite this, they have proven their existence in ca...
The evolution of the domain structures of [001]-oriented relaxor ferroelectric 0.93PbZn1/3Nb2/3O3-0.07PbTiO3 (PZN-7%PT) single crystals as a function of temperature was investigated in situ by using piezoresponse force microscopy (PFM). It was found...
We fabricated memristive devices using focused electron beam-induced deposition (FEBID) as a direct-writing technique employing a Pt/TiO2/Pt sandwich layer device configuration. Pinching in the measured current-voltage characteristics (i-v), the char...
In the present work, ternary composites were synthesized from commercial titanias (Evonik Aeroxide P25, Aldrich anatase—AA and Aldrich rutile—AR) and two noble metals (gold and platinum). This research focuses on the composition of the photocatalysts...
Here, we propose a Pt/HfO2/TaOx/TiN artificial synaptic device that is an excellent candidate for artificial synapses. First, XPS analysis is conducted to provide the dielectric (HfO2/TaOx/TiN) information deposited by DC sputtering and atomic layer...
Pt/C, PtMOn/C (M = Ni, Sn, Ti, and PtX/C (X = Rh, Ir) catalyst systems were prepared by using the pulse alternating current (PAC) technique. Physical and electrochemical parameters of samples were carried out by x-ray powder diffraction (XRD), transm...
High temperature surface acoustic wave sensors based on radio frequency identification technology require adequate antennas of high efficiency and thermal stability for the signal transmission. Platinum is well known and frequently used as a material...
of 10