Rumen degradation kinetics of 25 feedstuffs (six protein feeds, nine energy feeds and ten roughages) were first determined using the nylon bag technique in situ and the differences of degradation characteristics fitted with five or seven time points...
Safe operation of tailings reservoirs is essential to protect downstream life and property, but current monitoring methods are inadequate in scale and refinement, and most reservoirs are built in low coherence areas far from cities. Use of polarizati...
Accurate registration of multi-temporal LiDAR point clouds is essential for reliable monitoring of mining subsidence. Systematic errors in point clouds acquired at different times can arise from GNSS/INS positioning drift, sensor calibration bias, an...
One of the goals of map generalization is to achieve real-time visualization of massive entities while adapting to zoom-in/zoom-out conditions. Unlike traditional map generalization, this type of scaling operation does not simplify the data to produc...
HIV-1 vaccines have been challenging to develop, partly due to the high level of genetic variation in its genome. Thus, a vaccine that can induce cross-reactive neutralization activities will be needed. Studies on the co-evolution of antibodies and v...
The work in this article analyses the impact of time-delays on distributed real-time simulation stability and accuracy with respect to different decoupling points as well as the impact of decoupling point selection on system modes. We perform analysi...
Person detection underpins a growing range of commercial systems, from retail analytics to safety monitoring, yet the experimental practices used to configure such detectors are rarely examined. This paper presents an end-to-end empirical study of si...
(1) Background: studies on the long-term dynamic changes in fat depot metabolism in response to a high-fat diet (HFD) on hepatic lipid deposition and insulin resistance are sparse. This study investigated the dynamic changes produced by HFD and the p...
After the success of deep learning in point cloud segmentation and classification tasks, it has also been adopted as common practice in point cloud registration applications. State-of-the-art point cloud registration methods generally deal with this...
The article presents a new method for determining the distribution of measurement points, which can be used in the case of contact coordinate measurements of curvilinear surfaces of products. The developed method is based on multi-criteria decision a...
Greedy algorithm is one of the important point selection methods in the radial basis function based mesh deformation. However, in large-scale mesh, the conventional greedy selection will generate expensive time consumption and result in performance p...
Feature matching plays a crucial role in the process of 3D reconstruction based on the structure from motion (SfM) technique. For a large collection of oblique images, feature matching is one of the most time-consuming steps, and the matching result...
We examined whether point value information on a scoring rubric influences learners’ study time and concept selection when learning educationally relevant STEM information. Participants (N = 92) engaged in the self-regulated study of five conce...
To address the limitations of inadequate real-time performance and robustness encountered in estimating the pose of non-cooperative spacecraft during on-orbit missions, a novel method of feature point distribution selection learning is proposed. This...
The rapid expansion of cities brings in new challenges for the urban firefighting security, while the increasing fire frequency poses serious threats to the life, property, and safety of individuals living in cities. Firefighting in cities is a chall...
Machining feature recognition is a research hotspot in recent years. A point cloud is a geometry data representation format of three-dimensional (3D) models. The use of point cloud-based convolutional neural networks (CNNs) for machining feature reco...
This paper presents a new approach for the registration of airborne LiDAR point clouds by finding and matching corresponding linear plane features. Linear plane features are a type of common feature in an urban area and are convenient for obtaining f...
Wi-Fi-based fingerprint indoor positioning technology has gained special attention, but the development of this technology has been full of challenges such as positioning time cost and positioning accuracy. Therefore, selecting reasonable Wireless Ac...
The aim of this paper is to provide a method for selecting a green supplier in a dynamic environment, while considering the psychological behavior and the time factors of the decision maker from the manufacturer’s perspective. The supply select...
The modes of interaction (e.g., mouse and touch) between maps and users affect the effectiveness and efficiency of transmitting cartographic information. Recent advances in eye tracking technology have made eye trackers lighter, cheaper and more accu...
The number of feature points on the surface of a non-cooperative target satellite used for monocular vision-based relative navigation affects the onboard computational load. A feature point selection method called the quasi-optimal method is proposed...
Accurate selection and location of mobile cranes is a critical issue on construction sites, being able to contribute to the improvement of the safety and efficiency of lifting operations. Considering the complexities and dynamics of construction site...
Selecting the appropriate indicators and measuring time point numbers is important for accurately examining the shift in soil gross decomposition channel structure. Through a selected case study on a natural forest vs. rainfed arable system over a tw...
In this paper, we consider the problem of approximating the safety margin of a single instance of a technical system based on inaccurate observations at specified time points. The solution to this problem is based on the selection of a certain set of...
Ground-Based Synthetic Aperture Radar (GB-SAR), due to its high precision, high resolution, and real-time capabilities, is widely used in the detection of slope deformations. However, the weak scattering coefficient in low-coherence areas poses a gre...
In 5th generation mobile communication networks, the frequency band of the millimeter band of 30–100 GHz is supported to provide a transmission speed of 20 Gbps or higher. Furthermore, a huge transmission capacity, i.e., up to 1 Tbps, is one of...
In low-altitude rescue, civilian helicopters, relying on their speed, efficiency and flexibility, play at center stage. Due to the terrain restrictions of the disaster area, it is difficult for helicopters to carry out safe and efficient rescue in ci...
This study measured the time it took to select a target moving along a circular trajectory with a computer mouse. The time was changed according to the speed of the target, the width of target and the distance from the starting point to the target. H...
With the availability of high-throughput gene expression data in the post-genomic era, reconstruction of gene regulatory networks has become a hot topic. Regulatory networks have been intensively studied over the last decade and many software tools a...
Visual object grasping can be complex when dealing with different shapes, points of view, and environments since the robotic manipulator must estimate the most feasible place to grasp. This work proposes a new selective grasping system using only poi...
Branch length similarity (BLS) entropy is defined in a network consisting of a single node and branches. In this study, we mapped the binary time-series signal to the circumference of the time circle so that the BLS entropy can be calculated for the...
Unmanned Aerial Vehicles (UAVs) are widely used as mobile information collectors for sensors to prolong the network time in Wireless Sensor Networks (WSNs) due to their flexible deployment, high mobility, and low cost. This paper focuses on the scena...
The emerging WiFi Round Trip Time measured by the IEEE 802.11mc standard promised sub-meter-level accuracy for WiFi-based indoor positioning systems, under the assumption of an ideal line-of-sight path to the user. However, most workplaces with furni...
Modifier Adaptation (MA) is a method of real-time optimization (RTO) which modifies a single model to match the first order properties of the plant. Known uncertainties in the parameters of this model are discarded in favor of real-time measurements,...
Automated guided vehicles are widely used in warehousing environments for automated pallet handling, which is one of the fundamental parts to construct intelligent logistics systems. Pallet detection is a critical technology for automated guided vehi...
Using construction and demolition waste (CDW) as road subgrade filling materials is an excellent way to solve the disparity between increased demand and road construction aggregate shortages. However, a key quality control problem is predicting the s...
Micro-milling tools are usually used for the 3D precision processing of micro metal parts under ultra-high speed. However, due to the structural characteristics of small scale, variable cross-section, and weak stiffness, the vibration of micro-millin...
The gauging process can be very extensive and time-consuming due to the procedures involved. Since velocity measurement time (VMT) is one of the main variables that would allow gauging times to be reduced, this study seeks to determine the optimal po...
As an important part of spatial data, the point feature has always been an essential element in web maps and navigation maps. With the development of location-based services and the rapid increase in volunteered geographic information and social medi...
24 September 2026
Neck–shoulder disorders are common among computer users, yet the effects of integrated active breaks (IABs) on discomfort, electromyographic (EMG) responses, and typing performance remain unclear. This randomized crossover trial compared neck&n...
Changes in object morphology can be quantified using 3D optical scanning to generate 3D models of an object at different time points. This process requires registration techniques that align target and reference 3D models using mapping functions base...
The municipality generally uses its property to perform self-governing functions, and public or business activities. In the conditions of the Slovak Republic, the municipality operates either as a legal entity in its own name or carries out business...
Gaze estimation problem can be addressed using either model-based or appearance-based approaches. Model-based approaches rely on features extracted from eye images to fit a 3D eye-ball model to obtain gaze point estimate while appearance-based method...
Consumers are responsible for a large proportion of food waste, and food that has reached its use-by or best-before date is often discarded, even if edible. In this study on fresh chicken, the suitability of use-by dates currently used in the EU was...
Visual-inertial odometry (VIO) algorithms, fusing various features such as points and lines, are able to improve their performance in challenging scenes while the running time severely increases. In this paper, we propose a novel lightweight point&nd...
Trackless rubber-tired vehicles are the important auxiliary transportation equipment in coal mines. The main difficulty of their unmanned driving is that the underground environment information is complex but the onboard computing resources for perce...
The objective is to study the evolution of different characteristics of a population through time. These response variables may be related for each experimental unit, and in addition, the observations for each response may as well be correlated with...
This paper presents a robust control framework with meta-heuristic intelligence to optimize the energy performance of air handling units (AHUs) and to maximize the thermal comfort of occupants by judiciously selecting the temperature set points of tw...
The pervaporation properties of membranes based on comb-like polysiloxanes when C2-C4 alcohols are removed from water were studied for the first time. It was established that membranes based on comb-like polysiloxanes with linear aliphatic and organo...
In industrial production, it is very difficult to make a robot plan a safe, collision-free, smooth path with few inflection points. Therefore, this paper presents a safe heuristic path-planning method based on a search strategy. This method first exp...
of 102