Skip to Content

603 Results Found

  • Article
  • Open Access
7 Citations
4,951 Views
23 Pages

17 January 2019

Pipelines typically exhibit significant inelastic deformation under various loading conditions, making it imperative for limit state design to include considerations for the deformational capacity of pipelines. The methods employed to achieve higher...

(This article belongs to the Special Issue Recent Trends in Advanced High-Strength Steels)
  • Article
  • Open Access
352 Views
32 Pages

Digital-Twin-Driven Inversion of Gap Deformation in a Passenger Aircraft Door–Frame Assembly

  • Jianqiang Zhou,
  • Zeqing Yang,
  • Haitao Xue,
  • Weiwei He and ,
  • Ning Hu,
  • Hongwei Zhao,
  • Guofeng Zhang,
  • Wei Yin and
  • Zonghua Zhang
  • + 4 authors+ 0 author

28 September 2026

Accurate prediction and inversion of time-dependent gap deformation between a passenger aircraft door and its frame remain difficult under slowly varying pressurization because the response is governed by coupled geometry, lock restraint, and nonline...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
5 Citations
4,203 Views
17 Pages

28 October 2021

Ischemic stroke is one of the leading causes of death among the aged population in the world. Experimental stroke models with rodents play a fundamental role in the investigation of the mechanism and impairment of cerebral ischemia. For its celerity...

(This article belongs to the Section Sensing and Imaging)
  • Article
  • Open Access
28 Citations
7,000 Views
22 Pages

Model Selection for Parametric Surfaces Approximating 3D Point Clouds for Deformation Analysis

  • Xin Zhao,
  • Boris Kargoll,
  • Mohammad Omidalizarandi,
  • Xiangyang Xu and
  • Hamza Alkhatib

19 April 2018

Deformation monitoring of structures is a common application and one of the major tasks of engineering surveying. Terrestrial laser scanning (TLS) has become a popular method for detecting deformations due to high precision and spatial resolution in...

(This article belongs to the Special Issue 3D Modelling from Point Clouds: Algorithms and Methods)
  • Article
  • Open Access
329 Views
23 Pages

Parametric FEM–CLPSO–LightGBM Surrogate Model for Deformation Prediction of Casings in Creep Formations

  • Haihao Huang,
  • Zhiguo Wan,
  • Yihua Dou,
  • Haiqing Wen and ,
  • Zehan Zheng,
  • Wei Zhang and
  • Zhanshan Niu
  • + 2 authors+ 0 author

20 September 2026

The conventional analysis of casing deformation relies on engineering logging, analytical models, or repeated finite element modeling and simulation for different wells or field restricts, which may involve high costs, simplifying assumptions, and lo...

(This article belongs to the Topic Artificial Intelligence in Smart Industrial Diagnostics and Manufacturing—Third Edition)
  • Feature Paper
  • Review
  • Open Access
38 Citations
27,288 Views
9 Pages

14 February 2018

The generalized parametric structural schematic diagram, the generalized structural-parametric model, and the generalized matrix transfer function of an electromagnetoelastic actuator with output parameters displacements are determined by solving the...

  • Communication
  • Open Access
10 Citations
5,948 Views
16 Pages

16 September 2021

Temperature variation not only results in changes in refractive index, radius, thickness, and air space, but also leads to surface deformation due to the mismatch in thermal expansion coefficients between glass and mechanical materials. However, exis...

(This article belongs to the Special Issue Optical Instrumentation)
  • Proceeding Paper
  • Open Access
8 Citations
2,188 Views
6 Pages

Studying the Defects and Geometric Anomalies on Monolayer Parts Obtained via the Fused Deposition Modeling Process

  • Matheus Godoy Fonseca do Carmo,
  • Thiago Glissoi Lopes,
  • Verena Soares Bombonatti,
  • Paulo Roberto Aguiar and
  • Thiago Valle França

3 November 2020

The fused deposition modeling (FDM) process, commonly known as three-dimensional (3D) printing, deals with the manufacturing of parts by the subsequent addition of layers of fused plastic filament. The parts obtained during this process can be used f...

(This article belongs to the Proceedings of The First International Conference on “Green” Polymer Materials 2020)
  • Article
  • Open Access
23 Citations
10,029 Views
26 Pages

5 February 2020

Simplified models are widely applied in finite element computations regarding mechanical and structural problems. However, the simplified model sometimes causes many deviations in the finite element analysis (FEA) of structures, especially in the non...

(This article belongs to the Section Engineering Remote Sensing)
  • Article
  • Open Access
25 Citations
8,151 Views
30 Pages

NURBS-Based Parametric Design for Ship Hull Form

  • Hui Zhou,
  • Baiwei Feng,
  • Zuyuan Liu,
  • Haichao Chang and
  • Xide Cheng

Recently, the NURBS technique has been widely used in the 3D design software for ships. However, in most research, the NURBS technique is only applied to the mathematical representation of hull curves and surfaces, and the parametric deformation of h...

(This article belongs to the Special Issue Maritime and Ship Design)
  • Article
  • Open Access
2 Citations
1,272 Views
18 Pages

Improving Finite Element Optimization of InSAR-Derived Deformation Source Using Integrated Multiscale Approach

  • Andrea Barone,
  • Pietro Tizzani,
  • Antonio Pepe,
  • Maurizio Fedi and
  • Raffaele Castaldo

19 September 2025

Parametric optimization/inversion of Interferometric Synthetic Aperture Radar (InSAR) measurements enables the modeling of the volcanic deformation source by considering the approximation of the analytic formulations or by defining refined scenarios...

(This article belongs to the Section Engineering Remote Sensing)
  • Article
  • Open Access
2 Citations
3,481 Views
26 Pages

Deep Spectral Meshes: Multi-Frequency Facial Mesh Processing with Graph Neural Networks

  • Robert Kosk,
  • Richard Southern,
  • Lihua You,
  • Shaojun Bian and ,
  • Willem Kokke and
  • Greg Maguire
  • + 1 author+ 0 author

With the rising popularity of virtual worlds, the importance of data-driven parametric models of 3D meshes has grown rapidly. Numerous applications, such as computer vision, procedural generation, and mesh editing, vastly rely on these models. Howeve...

(This article belongs to the Special Issue Selected Papers from Young Researchers in AI for Computer Vision)
  • Article
  • Open Access
8 Citations
8,428 Views
15 Pages

Automatic Generation of Dynamic Skin Deformation for Animated Characters

  • Shaojun Bian,
  • Anzong Zheng,
  • Ehtzaz Chaudhry,
  • Lihua You and
  • Jian J. Zhang

31 March 2018

Since non-automatic rigging requires heavy human involvements, and various automatic rigging algorithms are less efficient in terms of computational efficiency, especially for current curve-based skin deformation methods, identifying the iso-parametr...

(This article belongs to the Special Issue Advances in Computer Graphics, Geometric Modeling, and Virtual and Augmented Reality)
  • Article
  • Open Access
15 Citations
4,480 Views
11 Pages

1 March 2021

In the present study, a three-dimensional finite element framework has been developed to model a full-scale multilaminate composite helicopter rotor blade. Tip deformation and stress behavior have been analyzed for external aerodynamic loading condit...

  • Article
  • Open Access
5 Citations
3,085 Views
19 Pages

Rapid Parametric CAx Tools for Modelling Morphing Wings of Micro Air Vehicles (MAVs)

  • Ángel Antonio Rodríguez-Sevillano,
  • María Jesús Casati-Calzada,
  • Rafael Bardera-Mora,
  • Javier Nieto-Centenero and ,
  • Juan Carlos Matías-García and
  • Estela Barroso-Barderas
  • + 1 author+ 0 author

This paper shows a series of tools that help in the research of morphing micro air vehicles (MAVs). These tools are aimed at generating parametric CAD models of wings in a few seconds that can be used in aerodynamic studies, either via CFD directly u...

(This article belongs to the Special Issue Structures, Actuation and Control of Morphing Systems)
  • Feature Paper
  • Article
  • Open Access
9 Citations
3,410 Views
12 Pages

An Experimental and Computational Study of the High-Velocity Impact of Low-Density Aluminum Foam

  • Matej Borovinšek,
  • Matej Vesenjak,
  • Kazuyuki Hokamoto and
  • Zoran Ren

21 April 2020

The study presents the results of an experimental and computational study of the high-velocity impact of low-density aluminum foam into a rigid wall. It is shown that the aluminum foam samples deformed before hitting the rigid wall because of the hig...

(This article belongs to the Special Issue Applied Mathematics and Computer Methods in Materials, Mechanics and Engineering )
  • Proceeding Paper
  • Open Access
788 Views
8 Pages

1 September 2025

A parametric-based finite element model was developed to analyze the behavior of rotating disks made from functionally graded materials (FGMs) subjected to thermal loads. The model enabled the rapid determination of critical speeds to prevent slip an...

(This article belongs to the Proceedings of 2025 IEEE 5th International Conference on Electronic Communications, Internet of Things and Big Data)
  • Article
  • Open Access
1 Citations
762 Views
18 Pages

Empirical Formulas for Plastic Deformation and Yield Criterion of Surface Induction-Hardened Bearings for Wind Turbines

  • Xiaoyu Guo,
  • Yan Zhao,
  • Wenjing Lou,
  • Xiaobo Wang and ,
  • Feng Guo and
  • Haichao Liu
  • + 1 author+ 0 author

In this study, an elastoplastic finite element (FE) contact model was developed to evaluate the plastic deformation of a surface induction-hardened tapered roller bearing used in wind turbines, incorporating depth-dependent material properties and he...

  • Article
  • Open Access
4 Citations
1,974 Views
13 Pages

Utilizing Artificial Neural Networks for Geometric Bone Model Reconstruction in Mandibular Prognathism Patients

  • Jelena Mitić,
  • Nikola Vitković,
  • Miroslav Trajanović,
  • Filip Górski and ,
  • Ancuţa Păcurar,
  • Cristina Borzan,
  • Emilia Sabău and
  • Răzvan Păcurar
  • + 3 authors+ 0 author

18 May 2024

Patient-specific 3D models of the human mandible are finding increasing utility in medical fields such as oral and maxillofacial surgery, orthodontics, dentistry, and forensic sciences. The efficient creation of personalized 3D bone models poses a ke...

  • Article
  • Open Access
2,327 Views
21 Pages

Reconstruction and Parametric Recognition of Endodontic Files from CT Scans for Design Modification and FEM Analysis

  • José Luis Iserte-Vilar,
  • Victor Roda-Casanova,
  • Alvaro Zubizarreta-Macho and
  • Javier Andrés-Esperanza

21 September 2025

Endodontic rotary file geometries are often obtained using computed tomography (CT) scans, which produce 3D models comprising point clouds and triangulated surfaces. Despite being widely used, this approach has significant limitations; scanned geomet...

(This article belongs to the Section Applied Dentistry and Oral Sciences)
  • Article
  • Open Access
12 Citations
5,270 Views
28 Pages

A Model for Translation and Rotation Resistance Tensors for Superellipsoidal Particles in Stokes Flow

  • Mitja Štrakl,
  • Matjaž Hriberšek,
  • Jana Wedel,
  • Paul Steinmann and
  • Jure Ravnik

In this paper, forces and torques on solid, non-spherical, orthotropic particles in Stokes flow are investigated by using a numerical approach on the basis of the Boundary Element Method. Different flow patterns around a particle are considered, taki...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
19 Citations
4,466 Views
16 Pages

An Analytical Model for Cure-Induced Deformation of Composite Laminates

  • Xiaobo Peng,
  • Jiang Xu,
  • Yong Cheng,
  • Long Zhang and ,
  • Jie Yang and
  • Yinghui Li
  • + 1 author+ 0 author

17 July 2022

Curing deformation prediction plays an important role in guiding the tools, curing process design, etc. Analytical methods can provide a rapid prediction and in-depth understanding of the curing deformation mechanism. In this paper, an analytical mod...

(This article belongs to the Special Issue Fiber-Reinforced Polymers (FRPs))
  • Article
  • Open Access
7 Citations
2,649 Views
15 Pages

Empowering Advanced Parametric Modes Clustering from Topological Data Analysis

  • Tarek Frahi,
  • Antonio Falco,
  • Baptiste Vinh Mau,
  • Jean Louis Duval and
  • Francisco Chinesta

16 July 2021

Modal analysis is widely used for addressing NVH—Noise, Vibration, and Hardness—in automotive engineering. The so-called principal modes constitute an orthogonal basis, obtained from the eigenvectors related to the dynamical problem. When this basis...

  • Article
  • Open Access
10 Citations
2,856 Views
27 Pages

Development of Artificial-Neural-Network-Based Permanent Deformation Prediction Model of Unbound Granular Materials Subjected to Moving Wheel Loading

  • Wenjun Hua,
  • Qunding Yu,
  • Yuanjie Xiao,
  • Wenqi Li and ,
  • Meng Wang,
  • Yuliang Chen and
  • Zhiyong Li
  • + 2 authors+ 0 author

19 October 2022

The majority of existing regression models for unbound granular materials (UGMs) consider only the effects of the number of loading cycles and stress levels on the permanent deformation characteristics and are thus unable to account for the complexit...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
22 Citations
5,290 Views
14 Pages

14 January 2019

Predicting and controlling process-induced deformation of composites during cure can play a significant role in ensuring the accuracy of manufacture and assembly of composite structures. In this paper the parametric investigation on the process-induc...

  • Article
  • Open Access
157 Views
28 Pages

13 October 2026

Under the cyclic traffic loading, roads often experience deformation accumulation, which impairs their service performance and shortens their service life. Therefore, investigating such issues is of great importance to road engineering. This study de...

  • Article
  • Open Access
1,364 Views
18 Pages

26 October 2025

Modern machining industries require high precision and efficiency in machine tools, where thermal deformations significantly impact accuracy. This study focuses on optimizing the structural parameters of a vertical turning center to minimize thermal...

(This article belongs to the Special Issue Smart Manufacturing and Materials: 3rd Edition)
  • Article
  • Open Access
7 Citations
4,022 Views
17 Pages

3D Digital Adaptive Thorax Modelling of Peoples with Spinal Disabilities: Applications for Performance Clothing Design

  • Sara Mosleh,
  • Mulat Alubel Abtew,
  • Pascal Bruniaux,
  • Guillaume Tartare and ,
  • Yukang Xu and
  • Yan Chen
  • + 1 author+ 0 author

17 May 2021

Peoples with spinal disability face a huge problem in the design and development of ergonomically fitted and comfortable clothing. Various research studies on the design and developments of functional clothing for scoliosis patients consider their mo...

(This article belongs to the Special Issue New Trends in Design Engineering)
  • Article
  • Open Access
2 Citations
5,465 Views
15 Pages

27 August 2023

This study focuses on the structural design analysis of a cura baglama, a traditional Turkish string instrument that does not have in place a regulated set of manufacturing standards to follow. The aim therefore is to introduce a structural deformati...

(This article belongs to the Special Issue Structural Optimization Methods and Applications)
  • Article
  • Open Access
10 Citations
11,392 Views
16 Pages

Dynamic Human Body Modeling Using a Single RGB Camera

  • Haiyu Zhu,
  • Yao Yu,
  • Yu Zhou and
  • Sidan Du

18 March 2016

In this paper, we present a novel automatic pipeline to build personalized parametric models of dynamic people using a single RGB camera. Compared to previous approaches that use monocular RGB images, our system can model a 3D human body automaticall...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
247 Views
24 Pages

12 September 2026

Incremental subsidence induced by sequential longwall panel extraction is associated with panel interaction and progressive instability of the disturbed rock mass. However, the governing mechanisms and the coupled effects of panel and pillar geometri...

(This article belongs to the Special Issue Sustainability in the Mechanism and Prevention of Coal-Rock Dynamic Disaster and Rock Engineering, 2nd Edition)
  • Article
  • Open Access
5 Citations
2,788 Views
15 Pages

1 November 2022

In this paper, a piezoelectric microgripper for arbitrary 2D trajectory is proposed. The desired trajectory of the specimen under consideration was obtained by the deformability of a structure consisting of 16 straight beams and 12 C-structures. The...

(This article belongs to the Section A: Physics)
  • Article
  • Open Access
8 Citations
2,740 Views
26 Pages

21 September 2024

To study the performance of lightweight foamed concrete (LWFC) in widened embankments of high-speed railways, this study first conducted numerous strength, permeability, and water immersion tests to investigate the mechanical properties and water res...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
327 Views
22 Pages

2 October 2026

Ground improvement can substantially reduce excavation-induced deformation in coastal soft soil, but increasing treatment depth does not necessarily produce a proportional mechanical benefit. This study investigates a 7.0 m-deep braced excavation usi...

  • Article
  • Open Access
2,838 Views
20 Pages

15 November 2022

Columnar inclusion is a versatile and cost-effective technique for improving weak soils. Currently, most approaches are based on the “equal strain” assumption to calculate the deformation of soft ground reinforced by columnar inclusions....

(This article belongs to the Special Issue Advances in Geotechnologies in Infrastructure Engineering)
  • Article
  • Open Access
21 Citations
4,554 Views
26 Pages

Investigation of Circular Hollow Concrete Columns Reinforced with GFRP Bars and Spirals

  • Afaq Ahmad,
  • Alireza Bahrami,
  • Omar Alajarmeh,
  • Nida Chairman and
  • Muhammad Yaqub

17 April 2023

Glass fiber-reinforced polymer (GFRP) reinforcements are useful alternatives to traditional steel bars in concrete structures, particularly in vertical structural elements such as columns, as they are less prone to corrosion, and impart increasing st...

(This article belongs to the Collection Advanced Concrete Structures in Civil Engineering)
  • Article
  • Open Access
1 Citations
1,209 Views
29 Pages

Parametric Cross-Section Design and Crashworthiness Optimization of High-Strength Steel Double-Cell Roll-Formed Tubes Under Lateral Bending

  • Pinpin Qin,
  • Yiyuan Shi,
  • Junming Huang,
  • Juncheng Lu and ,
  • Wujing Tu and
  • Hua Wu
  • + 1 author+ 0 author

Lightweight design and crashworthiness of protective structures are critical for battery safety in electric vehicles (EVs). This study addresses the limited research on cross-sectional shape design of high-strength steel double-cell roll-formed tubes...

(This article belongs to the Section Manufacturing)
  • Article
  • Open Access
2 Citations
2,284 Views
16 Pages

11 September 2022

This paper investigates the response mechanism behind an existing tunnel subjected to a long and deep collinear excavation in Shenzhen granite residual strata. The maximum excavation depth was 18.0 m and the minimum residual soil depth above the tunn...

  • Article
  • Open Access
1 Citations
1,612 Views
35 Pages

Blast-Induced Response and Damage Mitigation of Adjacent Tunnels: Influence of Geometry, Spacing, and Lining Composition

  • Marwa Nabil,
  • Mohamed Emara,
  • Omar Gamal,
  • Ayman El-Zohairy and
  • Ahmed M. Abdelbaset

In this study, a three-dimensional nonlinear finite element (FE) model was developed using Abaqus/Explicit to simulate the effects of internal blasts. The numerical model was validated against two previously published numerical and experimental works...

(This article belongs to the Special Issue Smart Technologies for Sustainable and Resilient Underground Infrastructures)
  • Article
  • Open Access
2 Citations
1,846 Views
23 Pages

Modeling Analysis of Complex Deformation of Woven Coating Film during the Cyclic Tensile Process

  • Li Cai,
  • Zhengyan Zhang,
  • Deng’an Cai,
  • Guangming Zhou and
  • Xinwei Wang

7 June 2024

It is difficult for the existing Burgers model to accurately depict the off-axis cyclic drawing process of woven coatings. In this paper, the mechanical deformation of woven PVC (polyvinyl chloride)-coated film at different temperatures is investigat...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
11 Citations
4,327 Views
19 Pages

11 November 2022

Large-deformation finite element (LDFE) analysis with the coupled Eulerian–Lagrangian (CEL) technique for large-deformation soil functions without twisting or distorting the mesh. However, the model does not consider the strain-softening and st...

(This article belongs to the Special Issue Advances in Offshore Geotechnics)
  • Article
  • Open Access
2 Citations
1,563 Views
23 Pages

Predicting Electromagnetic Performance Under Wrinkling in Thin-Film Phased Arrays

  • Xiaotao Zhou,
  • Jianfei Yang,
  • Lei Zhang,
  • Huanxiao Li and ,
  • Xin Jin,
  • Yesen Fan,
  • Yan Xu and
  • Xiaofei Ma
  • + 3 authors+ 0 author

Deployable thin-film antennas deliver large aperture gains and high stowage efficiency for spaceborne phased arrays but suffer wrinkling-induced planarity loss and radiation distortion. To bridge the lack of electromechanical coupling models for tens...

(This article belongs to the Special Issue Space Mechanisms and Robots)
  • Article
  • Open Access
19 Citations
3,881 Views
16 Pages

Non-Uniform Curvature Model and Numerical Simulation for Anti-Symmetric Cylindrical Bistable Polymer Composite Shells

  • Zheng Zhang,
  • Xiaochen Yu,
  • Helong Wu,
  • Min Sun and ,
  • Xianghao Li,
  • Huaping Wu and
  • Shaofei Jiang
  • + 2 authors+ 0 author

26 April 2020

The bistability of anti-symmetric thin shallow cylindrical polymer composite shells, made of carbon fiber/epoxy resin, has already been investigated based on the uniform curvature and inextensible deformation assumptions by researchers in detail. In...

(This article belongs to the Section Polymer Physics and Theory)
  • Article
  • Open Access
11 Citations
3,657 Views
24 Pages

2 August 2023

Crystal plasticity finite element (CPFEM) modeling of metals that can be age hardened consisting of second phase particles is extensively performed based on representative volume element (RVE) models. The RVE model is generated for ferritic low-carbo...

(This article belongs to the Special Issue Numerical Analysis of Microstructure and Mechanical Properties in Metallic Materials)
  • Article
  • Open Access
13 Citations
6,368 Views
20 Pages

4 September 2018

Buried pipelines are the main means of long distance transportation of natural gas. These pipelines are in high risk crossing liquefaction areas due to large deformations and stresses that may exist in pipe induced by the buoyancy load. In this study...

(This article belongs to the Section D: Energy Storage and Application)
  • Article
  • Open Access
4 Citations
2,817 Views
18 Pages

Fast and Compact Partial Differential Equation (PDE)-Based Dynamic Reconstruction of Extended Position-Based Dynamics (XPBD) Deformation Simulation

  • Junheng Fang,
  • Zhidong Xiao,
  • Xiaoqiang Zhu,
  • Lihua You and ,
  • Xiaokun Wang and
  • Jianjun Zhang
  • + 1 author+ 0 author

11 October 2024

Dynamic simulation is widely applied in the real-time and realistic physical simulation field. How to achieve natural dynamic simulation results in real-time with small data sizes is an important and long-standing topic. In this paper, we propose a d...

(This article belongs to the Special Issue Partial Differential Equations with Applications: Analytical Methods, 2nd Edition)
  • Article
  • Open Access
328 Views
26 Pages

Deformation Characteristics of the High-Pressure Mechanical Seal Based on the Thermo-Elasto-Hydrodynamic Lubrication Model

  • Jie Liu,
  • Wenjing Zhao,
  • Xiangkai Meng,
  • Kun Li and ,
  • Xiang Li,
  • Siyun Ding and
  • Xudong Peng
  • + 2 authors+ 0 author

17 September 2026

A three-dimensional thermo-elasto-hydrodynamic (TEHD) lubrication model is presented for the high-pressure deep-grooved mechanical seal employed. The thermo-elasto deformation behaviors of the seal rings are investigated using the finite element meth...

  • Article
  • Open Access
8 Citations
3,447 Views
20 Pages

Bending Deformation and Ultimate Moment Calculation of Screen Pipes in Offshore Sand Control Completion

  • Yudan Peng,
  • Guangming Fu,
  • Baojiang Sun,
  • Xiaohui Sun and ,
  • Jiying Chen and
  • Segen F. Estefen
  • + 1 author+ 0 author

Horizontal wells, extended-reach wells, and multi-branch wells were often used to exploit subsea oil and gas efficiently. However, during the sand control screen completion of those wells, the sand control screen pipe was easily deformed. Failure occ...

(This article belongs to the Special Issue Subsea Pipelines)
  • Article
  • Open Access
20 Citations
3,362 Views
23 Pages

Experimental and Numerical Studies on Fixed Steel Sheets Subjected to Underwater Explosion

  • Si Chen,
  • Jian Qin,
  • Shuo Deng,
  • Xiangyao Meng and ,
  • Ruiyuan Huang and
  • Xiaoqiang Yang
  • + 1 author+ 0 author

15 September 2022

This study presents underwater explosion tests with three different TNT charge weights to investigate the dynamic responses of a fixed steel sheet. A finite element model was established and benchmarked by comparing the bubble development and deforma...

of 13