This article describes the design, control, and implementation of a photovoltaic (PV) emulator using two-switch forward-converter topology. The system is designed to emulate the nonlinear electrical behavior of an actual PV panel under different envi...
This paper proposes a new method for maximum power point tracking (MPPT) of the photovoltaic (PV) system while using a DC-DC boost converter. The conventional perturb and observe (P&O) method has a fast tracking response, but it presents oscillat...
This paper presents the design, implementation, and experimental validation of a real-time embedded photovoltaic (PV) emulator based on the two-diode model, using a dSPACE DS1103 platform for hardware validation. The proposed system aims to accuratel...
This paper presents an optimal design of a fuzzy control rule base for tracking the maximum power point of a photovoltaic (PV) system. Fuzzy control is used for the maximum power point tracking (MPPT) of PV systems because it has the advantage of pro...
The real implementation of the maximum power point tracking (MPPT) controllers for the photovoltaic (PV) systems is still a big challenge for researchers working in this field. Often, they use simulation tools to assess the performance of their MPPT...
Assessing the performance of photovoltaic systems, particularly dedicated DC/AC inverter devices, requires the use of photovoltaic panels operating under natural environmental conditions, such as variations in solar radiation intensity, temperature a...
This paper presents a Modified Perturb & Observe (P&O) Maximum power point tracking (MPPT) algorithm using fuzzy logic-based variable step size to overcome some of the limitations associated with the conventional P&O MPPT tracking method...
This paper proposes a novel optimal current given (OCG) maximum power point tracking (MPPT) control strategy based on the theory of power feedback and hill climb searching (HCS) for a permanent magnet direct drive wind energy conversion system (WECS)...
Maximum power point tracking (MPPT) techniques are a fundamental part in photovoltaic system design for increasing the generated output power of a photovoltaic array. Whilst varying techniques have been proposed, the adaptive neural-fuzzy inference s...
This paper presents an accelerated particle swarm optimization (PSO)-based maximum power point tracking (MPPT) algorithm to track global maximum power point (MPP) of photovoltaic (PV) generation under partial shading conditions. Conventional PSO-base...
This research articles proposes a comparative symmetric examination of the four maximum-power point-tracking algorithms under partial shaded conditions, including Conservative MPPT, Grey Wolf Optimization, and Fast Terminal Sliding Mode MPPT. In addi...
This paper proposes a controller to track the maximum power point (MPP) of a photovoltaic (PV) system using a fractional-order proportional integral derivative (FOPID) controller. The employed MPPT is operated based on a dp/dv feedback approach. The...
In this paper, an asymmetrical fuzzy-logic-control (FLC)-based maximum power point tracking (MPPT) algorithm for photovoltaic (PV) systems is presented. Two membership function (MF) design methodologies that can improve the effectiveness of the propo...
This article presents a novel MPPT method for two stage PV inverters with a single phase connection to the power grid. The method takes advantage of the 100 Hz/120 Hz harmonic present on the DC-bus voltage to guide the MPP search. It consists of dete...
Photovoltaic (PV) power generation is considered to be a clean energy source. Solar modules suffer from nonlinear behavior, which makes the maximum power point tracking (MPPT) technique for efficient PV systems particularly important. Conventional MP...
In the current smart grid scenario, the evolution of a proficient and robust maximum power point tracking (MPPT) algorithm for a PV subsystem has become imperative due to the fluctuating meteorological conditions. In this paper, an adaptive feedback...
This paper presents an optimal design of a surface-based polynomial fitting for tracking the maximum power point (MPPT) of a photovoltaic (PV) system, here named surface-based polynomial fitting (MPPT-SPF). The procedure of the proposed MPPT-SPF stra...
The present study proposes a maximum power point tracking (MPPT) method in which improved teaching-learning-based optimization (I-TLBO) is applied to perform global MPPT of photovoltaic (PV) module arrays under dissimilar shading situations to ensure...
The formulation of a maximum power point tracking (MPPT) control strategy plays a vital role in enhancing the inherent low conversion efficiency of a photovoltaic (PV) module. Keeping in view the nonlinear electrical characteristics of the PV module...
In this article, a novel maximum power point tracking (MPPT) controller for the fast-changing irradiance of photovoltaic (PV) systems is introduced. Our technique utilizes a modified incremental conductance (IC) algorithm for the efficient and fast t...
Photovoltaic (PV) power generation may vary with respect to several factors such as solar radiation, temperature, power conditioning units, environmental effects, and shading conditions. The partial shading of PV modules is one of the most crucial fa...
Due to the intermittent nature of wind, there exists a major disparity between the power generation from the wind and the demand of electricity. Hence, a sophisticated maximum power point tracking (MPPT) control paradigm must be formulated for maximi...
This article analyzes and compares the integration of two different maximum power point tracking (MPPT) control methods, which are tested under partial shading and fast ramp conditions. These MPPT methods are designed by Improved Particle Swarm Optim...
In conventional adaptive variable step size (VSS) maximum power point tracking (MPPT) algorithms, a scaling factor is utilized to determine the required perturbation step. However, the performance of the adaptive VSS MPPT algorithm is essentially dec...
The traditional perturbation and observation (P&O) maximum power point tracking (MPPT) algorithm of a structure is simple and low-cost. However, the P&O algorithm is prone to divergence under solar radiation when the latter varies rapidly and...
In many solar inverters, a dc/dc converter is mainly located between the solar arrays and the inverter. This study presents an enhanced maximum power point tracking (MPPT) algorithm for photovoltaic (PV) systems that drives solar array voltages to tr...
This paper deals with the implementation and analysis of a new maximum power point tracking (MPPT) control method, which is tested under variable climatic conditions. This new MPPT strategy has been created for photovoltaic systems based on Particle...
Nowadays, photovoltaic (PV) systems are responsible for over 994 TWH of the worldwide energy supply, which highlights their relevance and also explains why so much research has arisen to enhance their implementation; among this research, different op...
The integration of photovoltaic (PV) systems with three-phase four-wire (3P4W) distribution networks has imposed several challenges related to existing unbalanced loads, reactive power generation and harmonics content. In this paper, a multifunctiona...
The research presented in this paper involves the design of a power control system for a hydrokinetic turbine previously tested in real operating conditions. A maximum power point tracking (MPPT) algorithm was designed and simulated using the require...
Despite the convenience of solar potential and the magnitude of energy received by the Earth from the sun, solar photovoltaic systems have failed to meet the growing energy demand. This can be attributed to various factors such as low cell efficiency...
Maximum Power Point Tracking (MPPT) methods are used in photovoltaic (PV) systems to continually maximize the PV array output power, which strongly depends on both solar radiation and cell temperature. The PV power oscillations around the maximum pow...
Maximum power point tracking (MPPT) algorithms are invariably employed to utilize solar photovoltaic (PV) systems effectively. Perturbation based MPPT algorithms are popular due to their simplicity and reasonable efficiency. While novel MPPT algorith...
Due to the shortage of fossil fuel and the environmental pollution problem, solar energy applications have drawn a lot of attention worldwide. This paper reports the use of the latest patented distributed photovoltaic (PV) power system design, includ...
Amid growing demand for solar photovoltaic (PV) energy, the output from PV panels/cells fails to deliver maximum power to the load, due to the intermittency of ambient conditions. Therefore, utilizing maximum power point tracking (MPPT) becomes essen...
This paper presents a maximum power point tracking (MPPT) algorithm in a solar photovoltaic (SPV) system that requires fewer sensors, is easy to implement, and offers a good tracking efficiency and speed. Among various MPPT algorithms found in litera...
Tracking the maximum output power of a photovoltaic (PV) cell is an important problem to harvest more energy at different weather and load conditions. This paper presents the design and simulation of a robust direct adaptive controller (RDAC) for max...
The disadvantage of photovoltaic (PV) power generation is that output power decreases due to the presence of clouds or shade. Moreover, it can only be used when the sun is shining. Consequently, there is a need for further active research into the ma...
This paper presents an experimental comparative study of four advanced maximum power point tracking (MPPT) strategies—backstepping, adaptive backstepping, sliding mode control, and vision-based MPPT—combined with three wireless communicat...
This paper presents the implementation of a high-efficiency radiofrequency (RF) harvester, which consists of a rectenna and a maximum power point tracker (MPPT). The rectenna was characterized from −30 dBm to −10 dBm at 808 MHz, achieving an efficien...
Photovoltaic (PV) systems play a crucial role in clean energy systems. Effective maximum power point tracking (MPPT) techniques are essential to optimize their performance. However, conventional MPPT methods exhibit limitations and challenges in real...
Central-type photovoltaic (PV) inverters are used in most large-scale standalone and grid-tied PV applications due to the inverter’s high efficiency and low-cost per kW generated. The perturbation and observation (P&O) and incremental condu...
In this paper, a new hybrid TSA-PSO algorithm is proposed that combines tunicate swarm algorithm (TSA) with the particle swarm optimization (PSO) technique for efficient maximum power extraction from a photovoltaic (PV) system subjected to partial sh...
The electrical energy from the sun can be extracted using solar photovoltaic (PV) modules. This energy can be maximized if the connected load resistance matches that of the PV panel. In search of the optimum matching between the PV and the load resis...
The effects of partial shading or dust accumulation on the panels of photovoltaic systems connected to the grid can generate a considerable reduction in energy performance, being necessary to provide the appropriate voltage to the grid regardless of...
Recently, the concept of green building has become popular, and various renewable energy systems have been integrated into green buildings. In particular, the application range of fuel cells (FCs) has become widespread due to the various government p...
Maximum Power Point Tracking (MPPT) control is an essential part of every photovoltaic (PV) system, in order to overcome any change in ambient environmental conditions and ensure operation at maximum power.. Recently, micro-inverters have gained a lo...
A photovoltaic system generates energy that depends on the environmental conditions such as temperature, irradiance and the variations in the load connected to it. To adapt to the consistently increasing interest of energy, the photovoltaic (PV) syst...
In this paper, we present a new maximum power point tracking (MPPT) algorithm that can identify whether a boost converter is operating in continuous conduction mode (CCM) or discontinuous conduction mode (DCM). The conventional MPPT algorithm assumes...
Special geometric features and complex working environments render the internal defects of small-diameter thick-walled steel pipes “easy to expand, difficult to detect”. In this paper, a magnetic permeability perturbation testing (MPPT) m...
of 6