Sulfonated aromatic polymers (SAPs) represent promising alternatives to perfluorinated ionomers for proton-exchange membrane fuel cells (PEMFCs), but their high hydrophilicity and limited chemical stability often require structural reinforcement and...
The chemical structure and morphology of a set of sulfonic gel-type poly(styrene-divinylbenzene) resins (2 mol% DVB) prepared with different synthetic approaches were investigated by solid state NMR, Inverse Size Exclusion Chromatography (ISEC), FT-I...
Vanadium complexes bearing naphthalene-bridged nitrogen-sulfonate ligand ([ê2(N,O)-8-(PhN)-1-naphthalenesulfonato]VOCl (1a) and [ê2(N,O)-8-(PhN)-1-naphthalenesulfonato]VCl2 (1b)) were synthesized. Activated by ethylaluminium sesquichloride (EASC) and...
Fibrillar collagen is the most prominent protein in the mammalian extracellular matrix. Therefore, it is also widely used for cell culture research and clinical therapy as a biomimetic 3D scaffold. Charged biopolymers, such as sulfated glycosaminogly...
This study investigates the interaction of polyacrylamide (PAM) of different functional groups (sulfonate vs. carboxylate) and charge density (30% hydrolysed vs. 10% hydrolysed) with calcium carbonate (CaCO3) via atomic force microscopy (AFM) and par...
A Periodic Mesoporous Organosilica (PMO) functionalized with sulfonic acid groups has been successfully synthesized via a sequence of post-synthetic modification steps of a trans-ethenylene bridged PMO material. The double bond is functionalized via...
With the recognition of the multiple advantages of sulfonated hydrocarbon-based polymers that possess high chemical and mechanical stability with significant low cost, we employed molecular dynamics simulation to explore the morphological effects of...
For the purpose of broadening the understanding of the sulfonic acid coordination mechanism, a coordination system consisting of Eu(III) ion and 1,3,6,8-pyrene tetra-sulfonate (1,3,6,8-PTS) ligand was chosen as the typical research object. By step re...
Sulfonic acids in ionic liquids (ILs) are used as catalysts, electrolytes, and solutions for metal extraction. The sulfonic acid ionization states and the solution acid/base properties are critical for these applications. Methane sulfonic acid (MSA)...
Surface heterogeneity of minerals can significantly affect the adsorption of collectors. Petroleum sulfonate is widely used as a fluorite collector, but how the surface heterogeneity of fluorite influences the adsorption of alkyl sulfonates remains u...
Sulfonated phenol–formaldehyde (SPF) resin used as a cross-linker for petroleum reservoir conformance control was synthesized under alkaline conditions. The reaction process of SPF resin was evaluated by measuring the solution’s viscosity...
Proton exchange membranes (PEMs) are essential for fuel cells, yet conventional materials like Nafion suffer from humidity dependence and limited thermal stability. This study introduces sulfonated phenylene-bridged periodic mesoporous organosilicas...
Biodiesel is produced by transesterification of animal fat, vegetable oil, or waste cooking oil with alcohol. After production costs, the economic viability of biodiesel is dependent on what steps are necessary to remove impurities following synthesi...
Ion-pair comonomers (IPCs) where both the anion and cation contain polymerizable functional groups offer a route to prepare polyampholyte, ion-containing polymers. Polymerizing vinyl functional groups by free-radical polymerization produces bridging...
Sulfonic organosilica nanotubes with different acidity densities could be synthesized through the co-condensation of ethenyl- or phenylene-bridged organosilane and 3-mercaptopropyltrimethoxysilane followed by sulfhydryl (–SH) oxidation. Transmission...
Mixed phenolic-polyurethane-type rigid foams were developed using tannin-furfuryl alcohol natural materials co-reacted with polymeric isocyanate in the proportions imposed by the limitations inherent to continuous industrial plants for polyurethane...
This paper presents a highly sensitive and novel wearable strain sensor using one-dimensional material for monitoring the respiration rate of an anesthetized rat. The dedicated sensitive sensor, based on carbon nanotubes mixed with poly(3,4-ethylened...
The search for polymers that meet the demands of the water recovery process in mining is a contingent challenge. Both the presence of clays and saline waters can impair water recovery from tailings when conventional flocculants are used. In this work...
The vanadium redox flow battery (VRFB) is a highly favorable tool for storing renewable energy, and the catalytic activity of electrode materials is crucial for its development. Taurine-functionalized carbon nanotubes (CNTs) were prepared with the ai...
This study investigates the optimization of polyphenylene oxide (PPO) electrospinning for interlaminar toughening in composites, using sulfonation modification and physical blending with polylactic acid (PLA) and polystyrene (PS). Both strategies sho...
The prevalence of antibiotics in water creates microbial resistance and has a negative impact on the ecosystem. Biomaterials such as spent tea leaves are rich in functional groups and are suitable for chemical modification for diverse applications. T...
The deposition of asphaltenes poses a critical challenge to the petroleum industry, reducing the efficiency of oil wells and, in severe cases, clogging pipelines. Dispersants are widely used to enhance asphaltene stability, but asphaltenes are comple...
Water-soluble salan ligands were synthesized by hydrogenation and subsequent sulfonation of salens (N,N’-bis(slicylidene)ethylenediamine and analogues) with various bridging units (linkers) connecting the nitrogen atoms. Pd (II) complexes were...
The precise construction and programmable assembly of structures with specific topologies remain persistent challenges in crystal engineering, primarily constrained by the limited availability of building blocks. Utilizing a synergistic approach that...
Conjugated polymers featuring donor–acceptor (D-A) architectures have emerged as promising candidates for visible-light-driven hydrogen evolution, owing to their tunable optoelectronic properties. However, achieving high photocatalytic activity...
The long–term stability of proton conductors is one of the most important factors in evaluating materials. Guest molecules can act as “bridges” for proton conduction channels and reside in the channels of covalent organic frameworks...
In this paper, a microparticle system consisting of cationic polyacrylamide (CPAM) and anionic spherical polyelectrolyte brushes (ASPB) is proposed to improve the retention of pulp suspension containing bleached reed kraft pulp and precipitated calci...
The present study investigates the photochemical properties of potential photosensitizers for photodynamic therapy, namely four commercial heptamethinecyanine dyes (IR125, IR780, IR813, IR820). Spectroscopic studies were made by means of laser induce...
Battery-type hybrid supercapacitors (HSCs) (otherwise known as supercapatteries) are novel electrochemical energy storage devices bridge the gap between rechargeable batteries and traditional SCs. Herein, we report the synthesis of layered two-dimens...
This study presents a new ternary copolymer synthesized via aqueous free-radical polymerization from sodium humate, sodium 2-methylprop-2-ene-1-sulfonate (SMAS), and 2-acrylamido-2-methylpropane sulfonic acid (AMPS). The resulting highly water-solubl...
Heavy oil in crude oil flooding is extremely difficult to extract due to its high viscosity and poor fluidity. In this paper, molecular dynamics simulation was used to study the emulsification behavior of sodium dodecyl sulfonate (SDSn) micelles on h...
The article describes a simple and scalable preparation of 2-monothiacalix[4]arene 7, the simplest representative of the mixed-bridged (CH2 and S) calix[4]arenes. The synthesis is based on the condensation of linear building blocks (bisphenols), whic...
Phthalocyanines are potentially promising photosensitizers (PSs) for photodynamic therapy (PDT), but the inherent defects such as aggregation-caused quenching effects and non-specific toxicity severely hinder their further application in PDT. Herein,...
Three organometallic copolymers, ICP1-3, containing iron(II) clathrochelate units with cyclohexyl lateral groups and interconnected by various thioether derivatives were synthesized. The reaction of the latter into their corresponding OICP1-3 sulfone...
12 March 2023
Sodium dodecylbenzene sulfonate (SDBS), an anionic surfactant, has both hydrophilic and lipophilic properties and is widely used in daily production and life. The SDBS-containing organic wastewater is considered difficult to be degraded, which is har...
The current work reports the synthesis, spectroscopic studies, antiradical and antiproliferative properties of four ruthenium(III) complexes of heterocyclic tridentate Schiff base bearing a simple 2′,4′-dihydroxyacetophenone functionality and ethylen...
Epigallocatechin gallate (EGCG)—the most abundant catechin in green tea—is a promising component of advanced composite biomaterials. The pharmacological activity of EGCG is typically attenuated upon thermal processing, although the exact...
The reactivity of the benzenedithiolate (bdt)-bridged complex [Fe2(CO)6(µ-bdt)] with arsine, stibine and phosphine ligands has been studied. The new mono- and disubstituted complexes [Fe2(CO)5(EPh3)(µ-bdt)] (E = As, 1; E = Sb 3) and [Fe2(...
Developing earth-abundant photocatalysts that operate efficiently under visible light remains a central challenge in sustainable aerobic oxidation chemistry. We synthesized a binuclear cobalt(II) structure (Co2) in which two redox-active metal center...
Alongiside the growing demand for wearable and implantable electronics, the development of flexible thermoelectric (FTE) materials holds great promise and has recently become a highly necessitated and efficient method for converting heat to electrici...
In this work, the consolidation of calcium carbonate (CaCO3) by polyacrylamide (PAM) of different molecular weights, charge densities, and functional groups was investigated via oscillatory rheology and unconfined compressive strength (UCS) analysis....
Fine kaolinite particles form stable suspensions that impede solid–liquid separation. A chitosan-based flocculant, CS-g-P(AM-AMPS), was synthesized by ultrasound-assisted graft copolymerization of acrylamide (AM) and 2-acrylamido-2-methylpropan...
Medical ultrasound transducers require acoustic impedance matching layers to bridge the gap between piezoelectric ceramics (~30–38 MRayl) and biological tissue (~1.5–1.7 MRayl). Existing solutions—such as alumina–epoxy, anodic...
Glutathione-based products, GSnX, of the reaction of hydrogen sulfide, H2S, S-nitroso glutathione, and GSNO, at varied stoichiometries have been analyzed by liquid chromatography high-resolution mass spectrometry (LC-HRMS) and chemical trapping exper...
Here we present the synthesis, structure and magnetic properties of complexes of general formula (Mn)(Me2NH2)4][Mn3(μ-L)6(H2O)6] and (Me2NH2)6[M3(μ-L)6(H2O)6] (M = CoII, NiII and CuII); L−2 = 4-(1,2,4-triazol-4-yl) ethanedisulfonate). The trinuclear...
The development of a simple and efficient synthetic methodology to engineer functional polymer materials for gas adsorption is necessary due to its relevance for various applications. Herein, we report the synthesis of metalorganic poly(vinylene sulf...
A Dy(III) coordination polymer (CP), [Dy(spasds)(H2O)2]n (1) (Na2Hspasds = 5-(4-sulfophenylazo)salicylic disodium salt), has been synthesized using a hydrothermal method and characterized. 1 features a 2D layered structure, where the spasda3− a...
In this paper, we propose a novel tactile sensor with a “fingerprint” design, named due to its spiral shape and dimensions of 3.80 mm × 3.80 mm. The sensor is duplicated in a four-by-four array containing 16 tactile sensors to form...
This study investigates the interaction between polycarboxylate-based water-reducing admixtures (WRAs) and various types of CEM I 42.5R Portland cements, focusing on optimizing input parameters in cementitious systems. Despite the widespread use of W...
The dispersion state of molecular catalysts critically determines sulfur utilization efficiency and redox kinetics in lithium–sulfur cells. Cobalt phthalocyanine (CoPc) exhibits intrinsic catalytic activity in sulfur redox reactions, owing to i...
of 2