- Article
In this work, the case of a Cox Process with Folded Normal Intensity (CP-FNI), in which the intensity is given by
In this work, the case of a Cox Process with Folded Normal Intensity (CP-FNI), in which the intensity is given by
The process quality capability indicators Cp and Cpk are widely used to measure process capability. Traditional metric estimation methods require process data to be explicit and normally distributed. Often, the actual data obtained from the productio...
Process capability indices (PCIs) have always been used to improve the quality of products and services. Traditional PCIs are based on the assumption that the data obtained from the quality characteristic (QC) under consideration are normally distrib...
It has been more than a decade since central banks, in the face of the global financial crisis, implemented a set of unconventional initiatives that included a rapid and significant decrease in their main interest rates and an unprecedented balance s...
The process performance index (PPI) can be a simple metric to connect the conforming rate of products. The properties of the PPI have been well studied for the normal distribution and other widely used lifetime distributions, such as the Weibull, Gam...
An infinite sequence
The advent of FLASH radiotherapy (FLASH-RT) has brought forth a paradigm shift in cancer treatment, showcasing remarkable normal cell sparing effects with ultra-high dose rates (>40 Gy/s). This review delves into the multifaceted mechanisms underp...
Let
26 April 2022
Quality improvement plays a major role in healthcare, and numerous approaches have been developed to implement changes. However, the reasons for success or failure of the methods applied often remains obscure. Normalization process theory, recently d...
To ensure the safety of nuclear power production, nuclear power plants deploy numerous sensors to monitor various physical indicators during production, enabling the early detection of anomalies. Efficient anomaly detection relies on complete sensor...
Simultaneous monitoring of the process parameters in a multivariate normal process has caught researchers’ attention during the last two decades. However, only statistical control charts have been developed so far for this purpose. On the other...
Let
The paper presents designing thermomechanical processing routes for medium-carbon boron-bearing microalloyed steel and investigates their effect on microstructure–property characteristics obtained through controlled cooling directly from hot fo...
In the realm of manufacturing processes, equipment failures can result in substantial financial losses and pose significant safety hazards. Consequently, prior research has primarily been focused on preemptively detecting anomalies before they manife...
We study the estimation of the offspring mean of a supercritical branching process in a random environment when multiple conditionally independent populations evolve in a common environment. Extending the single-population self-normalized Cramé...
With the rapid development of advanced sensor technologies, it has become popular to monitor multiple quality variables for a manufacturing process. Consequently, multivariate statistical process control (MSPC) charts have been commonly used for moni...
This paper assesses the bootstrap confidence intervals of a newly proposed process capability index (PCI) for Weibull distribution, using the logarithm of the analyzed data. These methods can be applied when the quality of interest has non-symmetrica...
6 March 2023
This study, based on the normalization process theory (NPT), explores the implementation of nonpharmaceutical interventions (NPIs)—specifically social distancing (SD)—in the professional lives of healthcare workers in three Pakistani hosp...
In the manufacturing process of high-grade non-oriented electrical steel, cast billets are subjected to hot rolling and normalizing treatments. These processes are implemented to optimize the microstructure and texture of steel sheets during producti...
The sustainability evaluation of engineering processes and structures is a multifaceted challenge requiring the integration of diverse and often conflicting criteria. To address this challenge, Multi-Criteria Decision-Making (MCDM) methods have emerg...
We study nearest-neighbor-based estimators of Tsallis entropy associated with Poisson and binomial point processes on general metric measure spaces. In this study, by combining existing stabilization methods with the validation of the estimator&rsquo...
We obtain closed-form expressions for the value of the joint Laplace transform of the running maximum and minimum of a diffusion-type process stopped at the first time at which the associated drawdown or drawup process hits a constant level before an...
Point cloud denoising is a fundamental preprocessing task in 3D vision and geometry processing, where the main challenge is to suppress corruption while preserving sharp features, thin structures, and local surface fidelity. Classical geometric filte...
Short-run production is frequently used in manufacturing due to technological advancements, and it is integral to Agriculture 4.0. In addition, monitoring multiple variables in short production runs (SPR) is often essential. For example, balancing th...
Business process redesign (BPR) is an organizational initiative for achieving competitive multi-faceted advantages regarding business processes, in terms of cycle time, quality, cost, customer satisfaction and other critical performance metrics. In s...
Normal fuzzy fault tree is a classic model in the field of process industry risk assessment, and it can provide reliable prior knowledge for machine learning. However, it is difficult to adapt the traditional approximate calculation method to highly...
In the context of geo-infrastructures and specifically tunneling projects, analyzing the large-scale sensor-based measurement-while-drilling (MWD) data plays a pivotal role in assessing rock engineering conditions. However, handling the big MWD data...
Wind-power generators around the world face two risks, one due to changes in wind intensity impacting energy production, and the second due to changes in electricity retail prices. To hedge these risks simultaneously, the quanto option is an ideal fi...
Monitoring the assembly process is a challenge in the manual assembly of mass customization production, in which the operator needs to change the assembly process according to different products. If an assembly error is not immediately detected durin...
This study investigates the impact of data distribution and bootstrap resampling on the anomaly detection performance of the Isolation Forest (iForest) algorithm in statistical process control. Although iForest has received attention for its multivar...
Multi-criteria decision making (MCDM) is necessary for choosing one from the available alternatives (or from the Pareto-optimal solutions obtained by multi-objective optimization), where the performance of each alternative is quantified against sever...
Image-guided surgery (IGS) can reduce the risk of tissue damage and improve the accuracy and targeting of lesions by increasing the surgery’s visual field. Three-dimensional (3D) medical images can provide spatial location information to determ...
Data from Landsat-8 and Sentinel-2A/2B are often combined for terrestrial monitoring because of their similar spectral bands. The bidirectional reflectance distribution function (BRDF) effect has been observed in both Landsat-8 and Sentinel-2A/2B ref...
A control chart monitoring the process capability index (PCI) using median absolute deviation (MAD) is proposed to analyze the industrial process performance. Extensive simulation studies were carried out to evaluate the performance of MAD-based PCI...
Studies have shown that the qualitative process assessment of cancer couple-based psychosocial interventions is often ignored. This article aims to evaluate the implementation process of an integrated psychosocial program developed for colorectal can...
Forest road aggregate changes due to traffic. The physical processes that cause these aggregate changes need to be understood for more effective road management that can help reduce maintenance costs and efforts, and negative environmental impacts of...
Forward osmosis (FO) technology has increasingly attracted attention owing to its low operational energy and low fouling propensity. Despite extensive investigations on FO, very few module-scale FO studies on the operation and design of the FO proces...
The terms sustainability, scaling up, and enabling environment are inconsistently used in implementing water supply projects. To clarify these terms we develop a framework based on Normalization Process Theory, and apply the framework to a hypothetic...
We model the logarithm of the spot price of electricity with a normal inverse Gaussian (NIG) process and the wind speed and wind power production with two Ornstein–Uhlenbeck processes. In order to reproduce the correlation between the spot pric...
Global energy shortages continue in the post-epidemic era. As clean primary energy, LNG plays an important role in the energy structure adjustment. However, with the widespread use of LNG, storage tank leaks occur frequently. In order to highlight th...
Aiming at the lack of reliable gradual fault detection and abnormal condition alarm and evaluation ability in the plasticizing process of single-base gun propellant, a fault detection and diagnosis method based on normalized mutual information weight...
This study presents a self-contained derivation and solution of the Black and Scholes partial differential equation (PDE), replacing the standard Wiener process with a smoothed Wiener process, which is a differentiable stochastic process constructed...
We consider a Student process based on independent copies of a random variable X. If X is in the domain of attraction of the normal law (DAN), a weighted version of the Student process is known to follow a functional Central Limit Theorem (FCLT). Acc...
This paper examines the tractability of multivariate approximation problems under the normalized error criterion for a zero-mean Gaussian measure in an average-case setting. The Gaussian measure is associated with a covariance kernel, which is repres...
In this paper, we focus on the partial functional linear model with linear process errors deduced by not necessarily independent random variables. Based on Mercer’s theorem and Karhunen–Loève expansion, we give the estimators of th...
Research approaches on the use of ecotechnologies like ozone assisted processes for the decolorization of textiles are being explored as against the conventional alkaline reductive process for the color stripping of the cotton textiles. The evaluatio...
The degradation rates of many engineering systems are always positive in practical applications. In some cases, the degradation process is approximately linear, such as train wheel wear degradation and an increase in the operating current of laser de...
E36 ship plate steel was, respectively, produced by as rolling and normalizing process (ARNP), and EH36 and FH36 ship plate steel was produced by the thermo-mechanical control process (TMCP) with low carbon and multi-element micro-alloying. The micro...
The need for covering large areas in oceanographic measurement campaigns and the general interest in reducing the observational costs open the necessity to develop new strategies towards this objective, fundamental to deal with current and future res...
This article describes a robust Gaussian Prior process state space modeling (GPSSM) approach to assess the impact of an intervention in a time series. Numerous applications can benefit from this approach. Examples include: (1) time series could be th...
of 316