- Article
We extend to operator mixing—specifically, to higher-spin twist-2 operators—the asymptotic theorem on the ultraviolet asymptotics of the spectral representation of 2-point correlators of multiplicatively renormalizable operators in large-...
We extend to operator mixing—specifically, to higher-spin twist-2 operators—the asymptotic theorem on the ultraviolet asymptotics of the spectral representation of 2-point correlators of multiplicatively renormalizable operators in large-...
Conserved currents of any spin
(Chern–Simons) vector models exhibit an infinite-dimensional symmetry, the slightly-broken higher-spin symmetry with the unbroken higher-spin symmetry being the first approximation. In this note, we compute the n-point correlation functions of...
We investigate the infinite-distance properties of families of unstable flux vacua in string theory with broken supersymmetry. To this end, we employ a generalized notion of distance in the moduli space and we build a holographic description for the...
We investigate cubic interactions between a chiral superfield and higher spin superfields corresponding to irreducible representations of the
Spin-dependent quantum transport properties in twisted carbon nanotube and stretched carbon nanotube are calculated using density functional theory (DFT) and non-equilibrium green’s function (NEGF) formulation. Twisting and stretching have no effect...
Profiling of spin bowlers is currently based on the assessment of translational velocity and spin rate (angular velocity). If two spin bowlers impart the same spin rate on the ball, but bowler A generates more spin rate than bowler B, then bowler A h...
White LEDs were encapsulated using Cs4PbBr6 quantum dots and Gd2O3:Eu red phosphor as lamp powder. Under the excitation of a GaN chip, the color coordinates of the W-LED were (0.33, 0.34), and the color temperature was 5752 K, which is close to the c...
Spin probe EPR spectroscopy is currently the only method to quantitatively report on the orientational ordering of graphene oxide membranes. This technique is based on the analysis of EPR spectra of a membrane containing stable radicals sorbed on oxi...
This study investigates the impact of spin-coating speed on the performance of carbon nanotube (CNT)-based optoelectronic synaptic devices, focusing on their long-term memory properties. CNT films fabricated at lower spin speeds exhibited a greater t...
Current-induced domain wall motion (CIDWM) in magnetic wires can be driven by spin transfer torque (STT) originating from transferring angular momentums of spin-polarized conducting electrons to the magnetic DW and can be driven by spin orbit torque...
Magnonic crystals and gratings could enable tunable spin-wave filters, logic, and frequency multiplier devices. Using micromagnetic models, we investigate the effect of nanowire damping, excitation frequency and geometry on the spin wave modes, spati...
The comprehension of potentiometric pH sensors with polymeric thin films for new and advanced applications is a constant technological need. The present study aimed to explore the relationship between the sensitivity and correlation coefficient of po...
With the end of Moore’s law in sight, researchers are in search of an alternative approach to manipulate information. Spintronics or spin-based electronics, which uses the spin state of electrons to store, process and communicate information, offers...
Employing the first-principles calculations within density functional theory (DFT) combined with the nonequilibrium Green’s function, we investigated the interfacial electronic, magnetic, and spin transport properties of Mn2CoAl/Ag/Mn2CoAl curr...
We examine three point functions with two scalar operators and a higher spin current in 2d W
Complementary polarized spin-transfer torque magnetic random-access memory (CPSTT-MRAM) has been proposed to address the sensing reliability issues caused by the single-ended sensing of STT-MRAM. However, it results in a three-fold increase in the fr...
28 August 2014
Static random access memory (SRAM) is the most commonly employed semiconductor in the design of on-chip processor memory. However, it is unlikely that the SRAM technology will have a cell size that will continue to scale below 45 nm, due to the leaka...
This review is focused on the recent development of various chitosan-based nanofibers (membranes, patches, mats, and scaffolds) that have been designed into core and shell structures using emulsion and coaxial electrospinning techniques. Chitosan, a...
In recent years, significant efforts have been devoted to the research and development of spin-coated Al2O3 thin films, due to their large band gaps, high breakdown voltage and stability at high annealing temperature. However, as the alumina precurso...
Lignin, while economically and environmentally beneficial, has had limited success in use in reinforcing carbon fibers due to harmful chemicals used in biomass pretreatment along with the limited physical interactions between lignin and polyacrylonit...
The passivated emitter and rear cell (PERC) concept is one of the most promising technologies for increasing crystalline silicon solar cell efficiency. Instead of using the traditional laser ablation process, this paper demonstrates spin-coated polys...
The structural, electronic, and spectroscopic properties of high- and intermediate-spin transition metal phthalocyaninato complexes (MPc; M = V, Cr, Mn and Fe) have been theoretically investigated to look into the origin, symmetry and strength of the...
Cuprates currently hold the record for the highest temperature superconductivity at ambient pressure, but the microscopic understanding of these materials remains elusive. Here, we utilize nuclear magnetic resonance (NMR) data of planar oxygen and co...
A perovskite photo-sensor is promising for a lightweight, thin, flexible, easy-to-coat fabrication process, and a higher incident photon-to-current conversion efficiency. We have investigated perovskite photo-sensors with a solution-processed compact...
The effect of conventional Perovskite solar cells (PSCs) by using different concentration and spin-coating speeds of titanium dioxide (TiO2) as an electron transport layer (ETL) was studied. The influence of TiO2 based on device structure: fluorine-d...
Ni–Mn-based Heusler alloys are known to demonstrate magnetic shape memory and giant magnetocaloric effect (MCE). These effects depend on the phases, crystallographic and magnetic phase transitions, and the crystallographic texture characteristi...
Silk fibroin, a biocompatible and flexible biopolymer derived from Bombyx mori silkworms, has shown promise in bioelectronics, due to its adjustable dielectric properties. This study investigates the influence of spin coating parameters on the optica...
High efficiency perovskite light-emitting diodes (PeLEDs) using PEDOT:PSS/MoO3-ammonia composite hole transport layers (HTLs) with different MoO3-ammonia ratios were prepared and characterized. For PeLEDs with one-step spin-coated CH3NH3PbBr3 emitter...
In this study, three kinds of round-shaped pitch-based graphite fiber with different microstructural features (crystallinity and carbon layer orientation) were fabricated by melt-spinning, preoxidation, carbonization and graphitization. The morpholog...
The blocking layer is crucial for inhibiting recombination processes in photovoltaics that utilize oxide semiconductors, such as dye-sensitized solar cells (DSSCs), quantum-dot-sensitized solar cells (QDSSCs), and perovskite solar cells. However, its...
Current-perpendicular-to-plane (CPP) magnetoresistance (MR) effects are often exploited in various state-of-the-art magnetic field sensing and data storage technologies. Most of the CPP-MR devices are artificial layered structures of ferromagnets an...
In this research, inverted bulk heterojunction organic solar cells (BHJ OSC) with poly(3-hexylthiophene-2,5-diyl): (6,6)-phenyl C61 butyric acid methyl (P3HT:PCBM) as the active layer were fabricated by a sol-gel spin coating method using flexible PE...
In this paper, an inorganic polymer composite film is proposed as an effective radiative cooling device. The inherent absorption is enhanced by choosing an appropriately sized SiO2 microsphere with a diameter of 6 μm. The overall absorption at the tr...
The color transparency (CT) of a hadron, propagating with reduced absorption in a nucleus, is a fundamental property of QCD (quantum chromodynamics) reflecting its internal structure and effective size when it is produced at high transverse momentum,...
Radial vortex-based spin torque nano-oscillators (RV-STNOs) have attracted extensive attention as potential nano microwave signal generators due to their advantages over other topological states, such as their higher oscillation, higher microwave pow...
In this work, we fabricated quantum dot light-emitting diodes using solution-processed NiO as the hole injection layer to replace the commonly used poly(3,4-ethylenedioxythiophene): poly(styrene-sulfonate) (PEDOT:PSS) layer. We successfully prepared...
In this study, a self-powered broadband photodetector based on graphene/NiO/n-Si was fabricated by the direct spin-coating of nanostructured NiO on the Si substrate. The current–voltage measurement of the NiO/Si heterostructure exhibited rectif...
Due to the excellent photonic and electrical properties of metal halide perovskite materials, perovskite light-emitting devices have the potential to replace OLED devices as the next-generation of commercial light-emitting devices. In this article, w...
The spin valve principle is the most prominent sensor design among giant- (GMR) and tunneling (TMR) magnetoresistive sensors. A new sensor concept with a disk shaped free layer enables the formation of a flux-closed vortex magnetization state if a ce...
For a safe environment, humanity should be oriented towards renewable energy technology. Water splitting (WS), utilizing a photoelectrode with suitable thickness, morphology, and conductivity, is essential for efficient hydrogen production. In this r...
The electron transport layer (ETL) has been extensively investigated as one of the important components to construct high-performance perovskite solar cells (PSCs). Among them, inorganic semiconducting metal oxides such as titanium dioxide (TiO2), an...
Although the photovoltaic performance of the composite of poly-3-hexylthiophene (P3HT) with semiconducting single-walled carbon nanotubes (s-SWCNT) is promising, the short-circuit current density jSC is much lower than that for typical polymer/fuller...
The optimization of multicomponent emissive layer (EML) deposition by slot-die coating for organic light-emitting diodes (OLEDs) is presented. In the investigated EMLs, the yellow-green iridium complex (Ir) was doped in two types of host: a commonly...
Transparent Ga and In co-doped ZnO (ZnO:Ga-In) semiconductor thin films were deposited on Corning glass substrates by the sol-gel spin-coating process. The ZnO:Ga-In thin films were used as the sensing layer of metal–semiconductor–metal (...
In this work, we introduce a totally vacuum-free cost-efficient crystalline silicon solar cells. Solar cells were fabricated based on low-cost techniques including spin coating, spray pyrolysis, and screen-printing. A best efficiency of 17.51% was ac...
The characteristics of X-ray Diffraction (XRD), Current (I)-Voltage (V), and the Polarization-Electric field (P-E) on the BiFeO3 (BFO), BaTiO3 (BTO), and our proposed Multi-Layer (ML) BiFeO3/BaTiO3 (BFO/BTO) samples are studied systemically. The infl...
In this study, poly(9-vinylcarbazole) (PVK)-based LEDs doped with reduced graphene oxide (rGO) and cadmium sulphide (CdS) nanocrystals were fabricated by spin-coating. The hybrid LED structure was a layer sequence of glass/indium tin oxide (ITO)/PEDO...
The promising possibility of an organic photodetector (OPD) is emerging in the field of sensing applications for its tunable absorption range, flexibility, and large-scale fabrication abilities. In this work, we fabricated a bulk heterojunction OPD w...
We outline an intermediate step toward a semirelativistic BSR–RMT interface by using inner-region structure information generated with the B-spline R-matrix (BSR) method as the input to the Seaton/Badnell STGF/STGBF outer-region asymptotic code...
of 3