- Article
This paper presents a rigid–elastic coupling dynamic model for a morphing aircraft with variable-sweep wings, developed using Kane’s method. The model accurately captures the interactions between flight dynamics and structural dynamics du...
This paper presents a rigid–elastic coupling dynamic model for a morphing aircraft with variable-sweep wings, developed using Kane’s method. The model accurately captures the interactions between flight dynamics and structural dynamics du...
The paper presents an elastic coupling with bolts and intermediary non-metallic elements, which allows for radial and axial deviation and can absorb shocks and torsional vibrations. The designed bolts have a particular shape of a circular area of a l...
Mixed mode fracture is a widely studied topic, while the coupling effects of mixed mode cracking are unclear. In this paper, elastic fracture behaviors and the coupling effects of the mixed mode cracks are studied in detail based on the finite elemen...
Due to the special aerodynamic layout and mass distribution, the natural frequency differences between the hybrid wing body (HWB)’s rigid-body motion modes and the fuselage structure elastic modes are smaller compared to conventional aircraft,...
In this work, a 3D fully coupled hygro-elastic model is proposed. The moisture content profile is a primary variable of the model’s displacements. This generic fully coupled 3D exact shell model allows the investigations into the consequences a...
This paper presents some of the issues related to the implementation of advanced control structures (PI controller with additional feedback, Model Predictive Controller) for drives with elastic coupling on a programmable logic controller (PLC). The p...
For transient mixed Elastohydrodynamic lubrication (EHL) problems, a novel solution is required to predict friction loss and wear in sliding or rolling parts. However, existing solutions have numerous limitations. In general, the lower the oil film t...
This research examines the free vibration characteristics of composite ring-like structures enhanced with carbon nanotubes (CNTs), taking into account the effects of CNT agglomeration. The structural framework comprises two concentric composite rings...
Analytical calculations were performed on carbon fiber-reinforced polymer (CFRP) laminates in an asymmetrical configuration. The asymmetric configuration of composites was investigated, where extension–twisting and extension–bending coupl...
In research concerning the impact resistance characteristics of ship power transmission shaft systems incorporating a high-elasticity coupling, a significant challenge lies in ascertaining the displacement compensation metrics for the high-elasticity...
Although the passively adjusting and actively tuning of pure longitudinal (primary (P-)) and pure transverse (secondary or shear (S-)) waves band structures in periodically laminated piezoelectric composites have been studied, the actively tuning of...
Due to the coupling of the damper journal with the elastic ring and oil film, the elastic ring squeeze film damper (ERSFD) shows better dynamic performance in comparison with the traditional squeeze film damper (SFD). Therefore, a novel rigid–e...
In order to reveal the mechanism of Category II rotor-body-slung-load coupled oscillation (RBSLCO) with the frequency range of 2.5~8 Hz, a novel nonlinear rigid-elastic coupled model is presented for the helicopter and slung load system (HSLS) with e...
In any drive system, there are always couplings between the motor and the load. Since the hardness of these couplings is finite, they have elastic properties, causing unwanted vibration and negatively affecting system quality. When the couplings are...
In nonlocal elasticity, the constitutive equation for the stress tensor is written in an integral form, with the weight function, referred to as the nonlocality kernel, often being the Green’s function for the partial differential equation. In...
It is difficult to measure elastic modulus simply and accurately in the testing of mechanical properties of materials. Combined with static tensile method, this paper presents a method for measuring elastic modulus of materials based on air-coupled u...
Ocean bottom seismometer (OBS) can record both pressure and displacement data by modern marine seismic acquisitions with four-component (4C) sensors. Elastic full-waveform inversion (EFWI) has shown to recover high-accuracy parameter models from mult...
With the development of aerospace technology, hypersonic flight vehicles are evolving towards larger size, lighter weight, and higher performance. Their cross-domain maneuverability and extreme flight environment led to the rigid–flexible coupl...
Cylindrical shells containing complex elastic coupling systems are the main structural form of underwater vehicles. Therefore, in this paper, the vibroacoustic radiation problem of underwater cylindrical shells containing complex internal elastic cou...
In this work, a coupled 3D thermo-elastic shell model is presented. The primary variables are the scalar sovra-temperature and the displacement vector. This model allows for the thermal stress analysis of one-layered and sandwich plates and shells em...
This paper addresses port-based models for open multi-physical systems with reversible and irreversible couplings in the framework of the so-called GENERIC (General Equation for Non-Equilibrium Reversible–Irreversible Coupling) formalism. For t...
A Wavestar-type Wave Energy Converter (WEC) on an elastic foundation structure was investigated using an author-developed coupled dynamic analysis computer program. The program included an elastic foundation structure composed of beam elements, a mul...
Elastic waves, especially guided waves, generated by a piezoelectric actuator/sensor network, have shown great potential for on-line health monitoring of advanced aerospace, nuclear, and automotive structures in recent decades. Piezoelectric material...
Studies show that the systematic study of the stiffness characteristics of the laminated membrane coupling is helpful to analyze the vibration status of the shaft system deeply and accurately. Moreover, such an investigation can provide a reliable gu...
Gas transport in shale gas reservoirs is largely affected by rock properties such as permeability. These properties are often sensitive to the in-situ stress state changes. Accurate modeling of shale gas transport in shale reservoir rocks considering...
Elastically supported bearing assemblies are widely used in aero-engine rotor systems, in which interactions between internal bearing motion and rotor vibration affect the system dynamics. In this study, a scaled test rig representative of an aero-en...
A fully coupled three-dimensional (3D) thermo-magneto-elastic layer-wise formulation is developed for the analysis of multilayered flat and curved panels used in aerospace and aeronautical applications. The model relies on a system of coupled second-...
This paper presents an experimental evaluation of influence of the elastic couplings on the fracture toughness as well as on delamination initiation and propagation in carbon/epoxy composite laminates. For this purpose the mode I double cantilever be...
This paper proposes a comprehensive framework, Theory–Simulation–Experimental Verification, for the elasto-aerodynamic analysis of elastic foil gas bearings (EFGBs). In contrast to many studies that approximate the foil structure using simplified two...
This paper aims at experimental and numerical research of delamination process in carbon/epoxy composite laminates with different fiber orientation angles in stacking sequence exhibiting the bending–twisting elastic couplings. Experimental spec...
Due to the large application of tapered beams in smart devices, such as scanning tunneling microscopes (STM), nano/micro electromechanical systems (NEMS/MEMS), atomic force microscopes (AFM), as well as in military aircraft applications, this study d...
Accurately predicting the performance of gas foil bearings (GFBs) is important. This paper presents a new fully coupled elastic–aerodynamic model for analyzing the static performance of gas foil journal bearings (GFJBs). The gas compressible lu...
Multiferroics are materials that electrically polarize when subjected to a magnetic field and magnetize under the action of an electric field. In composites, the multiferroic effect is achieved by mixing of ferromagnetic (FM) and ferroelectric (FE) p...
The linear axis is a core motion module in precision equipment and directly affects assembly and machining accuracy. Inaccurate prediction of motion error may lead to failure in aerospace manufacturing and assembly. Most existing methods typically as...
To investigate the deterioration pattern of the rheological properties of high-viscosity high-elasticity asphalt (HVEA) under UV and salt freeze–thaw (SFT) cycle environments, two snowmelt salts were used for coupled aging tests, along with tem...
Based on the Newton–Euler method, a multi-body coupling dynamics model of the separation process of underwater vehicles is established. The conditions of contact and detachment between the sub-vehicle and each group of elastic gaskets are analy...
We consider the behavior of a viscous fluid within a container that has an elastic upper, free boundary. The movement of the upper boundary is described by a combination of a plate equation and a boundary condition of friction type that quantifies th...
Lined pipes are widely used in oil and gas transportation systems due to their excellent corrosion resistance and cost-effectiveness. However, current design codes often oversimplify their mechanical behavior by treating them as single-layer systems,...
Physics-informed neural networks (PINNs) provide a new approach to solving partial differential equations (PDEs), while the properties of coupled physical laws present potential in surrogate modeling. However, the accuracy of PINNs in solving forward...
This study analytically investigates shear horizontal (SH) wave propagation in a layered structure consisting of a piezoflexoelectric (PFE) layer bonded to an elastic substrate, considering an imperfect interface. A frequency equation is derived by a...
The coupling effect of moisture content and temperature on the elastic modulus of concrete is experimentally investigated. The elastic modulus of dry concrete exhibits a clear temperature-weakening effect, while the elastic modulus of wet concrete ex...
In an electromagnetic rail launcher, a metal liquid film is created at the armature/rail (A/R) contact interface. It has a significant impact on electromagnetic launch performance. In this paper, an electromagnetic-elastic mechanics-hydrodynamics mul...
The Cretaceous Zhidan group (K1zh) pore fissure-confined water aquifer in Yingpanhao Coal Mine, Ordos City, China, has loose stratum structure, high porosity, strong permeability and water conductivity. In order to explore the fluid–solid coupl...
Piston pair is a key friction pair of the axial piston pump, but the influence of elastic deformation and the structure design method is not clear. To reveal the real performance of piston pair, a new fluid–solid coupling calculation method is...
The body freedom flutter characteristics of an airfoil and a fly wing aircraft model were calculated based on a CFD method for the Navier–Stokes equations. Firstly, a rigid elastic coupling dynamic model of a two-dimensional airfoil with a free–free...
Colloidal crystals permeated by mobile ions exhibit a coupling between electrostatic and elastic degrees of freedom that renormalizes the effective screening length and induces wave-vector-dependent elastic softening. Building on our recently propose...
In this paper, a new magneto-electro-elastic functionally graded Timoshenko microbeam model is developed by using the variational formulation. The new model incorporates the extended modified couple stress theory in order to describe the microstructu...
The constant and dynamic interaction between ventricular function and arterial afterload, known as ventricular-arterial coupling, is key to understanding cardiovascular pathophysiology. Ventricular–arterial coupling has traditionally been asses...
This article considers an unsteady elastic diffusion model of Euler–Bernoulli beam oscillations in the presence of diffusion flux relaxation. We used the model of coupled elastic diffusion for a homogeneous orthotropic multicomponent continuum...
The angular distributions of the elastic and inelastic scattering of α-particles on 10B nuclei were measured at an energy of 29 MeV (with excitation of the 0.718 MeV (1+) state). The data obtained by us, together with the angular distributions...
of 37