Two-dimensional (2D) materials with binary compounds, such as transition-metal chalcogenides, have emerged as complementary materials due to their tunable band gap and modulated electrical properties via the layer number. Ternary 2D materials are pro...
In this work, we present an effective process easily adapted in industrial environments for the development of multifunctional nanocomposites for material extrusion (MEX) 3D printing (3DP). The literature is still very limited in this field, although...
In this work, for the first time, polyamide 12 (PA12) nanocomposites with binary inclusions in material extrusion (MEX) 3D printing were developed. The aim was to achieve an enhanced mechanical response with the addition of titanium nitride (TiN) and...
Manganese dioxide (MnO2), as a promising green material, has recently attracted considerable attention of researchers from various fields. In this work, a facile method was introduced to prepare binary hybrids by fabricating three-dimensional (3D) zi...
Materials composed of two dimensional layers bonded to one another through weak van der Waals interactions often exhibit strongly anisotropic behaviors and can be cleaved into very thin specimens and sometimes into monolayer crystals. Interest in suc...
An innovative form of 2D/0D g-C3N4/CeO2 nanostructure was synthesized using a simple precursor decomposition process. The 2D g-C3N4 directs the growth of 0D CeO2 quantum dots, while also promoting good dispersion of CeO2QDs. This 2D/0D nanostructure...
Two-dimensional (2D) materials attracted widespread interest as unique and novel properties different from their bulk crystals, providing great potential for semiconductor devices and applications. Recently, the family of 2D materials has been expand...
Three-dimensional (3D) food printing enables personalized fabrication but requires materials with suitable printing properties. This study developed high internal phase Pickering emulsions (HIPPEs) stabilized by co-assembled whey protein isolate (WPI...
In this work, a promising material of polyaniline (PANI) and two-dimensional molybdenum diselenides consisting of a PANI@2D-MoSe2 binary composite was prepared by an electrochemical polymerization ethod. The as-prepared PANI@2D-MoSe2, the polymer cov...
Based on the PM6:Y6 binary system, a novel non-fullerene acceptor material, D18-Cl, was doped into the PM6:Y6 blend to fabricate the active layer. The effects of different doping ratios of D18-Cl on organic solar cells were investigated. The best-per...
Electronic devices play an increasingly vital role in modern society, and heat accumulation is a major concern during device development, which causes strong market demand for thermal conductivity materials and components. In this paper, a novel ther...
Poly(lactic acid) (PLA) filaments have been the most used in fused deposition modeling (FDM) 3D printing. The filaments, based on PLA, are continuing to be developed to overcome brittleness, low heat resistance, and obtain superior mechanical perform...
Portland cement–silica fume binary cementitious materials are widely used in engineering construction and have been investigated from micro- to macroscopic aspects. However, the theoretical background on the hydration kinetics of the binary sys...
The microstructure of the Ti-Al binary system is an area of great interest, as it affects material properties and plasticity. Phase transformations induce microstructural changes; therefore, accurately modeling the phase transformations of the Ti-Al...
We developed the Global–Local Integrated Topology inverse design algorithm (denoted as the GLINT algorithm), which employs a trajectory-based optimization strategy with waveguide–substrate material-flipping structural modifications, enabl...
Guided-mode resonance strain sensors are planar binary gratings that have fixed resonance positions and quality factors decided by material properties and grating parameters. If one is restricted by material choices, the quality factor can only be im...
Graphene, a 2D material with high conductivity and stability in aqueous media, could complement silicon as raw material for sensing with transistor-based devices in liquids. Furthermore, the fabrication of graphene-based transistors is affordable wit...
Multicomponent oxide systems have many applications in different fields such as optics and medicine. In this work, we developed new hybrid photoresists based on a combination of an organic acrylate resin and an inorganic sol, suitable for 3D printing...
With the approaching end of Moore’s Law (that the number of transistors in a dense integrated circuit doubles every two years), the logic data density in modern binary digital integrated circuits can hardly be further improved due to the physic...
Texture recognition is a pivotal task in computer vision, crucial for applications in material sciences, medicine, and agriculture. Leveraging advancements in Deep Neural Networks (DNNs), researchers seek robust methods to discern intricate patterns...
One-dimensional (1D) nanomaterials have attracted considerable attention in the fabrication of nano-scale optoelectronic devices owing to their large specific surface areas, high surface-to-volume ratios, and directional electron transport channels....
The use of agro-waste materials as an alternative to synthetic dyes has gained considerable interest in the development of sustainable textile coloration. This study investigates the utilization of binary colorants from agro-waste sources such as har...
Intense sources of very cold neutrons (VCNs) would be beneficial for various neutron scattering techniques and low-energy particle physics experiments. Binary clathrate hydrates hosting deuterated tetrahydrofuran (THF-d) and dioxygen show promise as...
Extreme ultraviolet (EUV) lithography is being industrialized as the next candidate printing technique for high-volume manufacturing of scaled down integrated circuits. At mask level, the combination of EUV light at oblique incidence, absorber thickn...
In this study, three-dimensional (3D) biopolymeric scaffolds made from collagen, silk fibroin and chitosan were successfully prepared by the freeze drying method. Dialdehyde starch (DAS) was used as a cross-linking agent for the materials. The proper...
The development of quantum computers is based on discovering materials capable of protecting qubits from environmental noise and preserving quantum coherence. Topological materials have emerged as highly promising candidates for hosting fault-toleran...
In this paper, a comparative analysis and numerical simulation of operation of two types of amplitude binary gratings (conventional and fork), both in the focal plane and near-field diffraction under illumination by mode beams with different polariza...
Integrating the “programmable” characteristics of smart materials with 3D printing technology enables the integration of structural design and manufacturing, showing broad application prospects in flexible electronics, aerospace, biomedic...
We report here the preparation and thermal, electrical and mechanical characterization of binary and ternary films based on l,d-poly(lactic acid) (l,d-PLA) and 4′-pentyl-4-biphenylcarbonitrile (5CB) and Single Walled Carbon Nanotubes (SWCN) wit...
Manganese antimonide Mn2−xMxSb, where M is a 3d transition metal, is a prominent binary material due to its high Curie temperature and magnetocaloric properties accompanying the M-induced first-order phase transition for various compositions. I...
To promote construction waste recycling and develop sustainable pavement materials, this study utilized recycled aggregates (crushing value 7.8%) obtained from bridge demolition as a 100% replacement for natural aggregates in recycled pervious concre...
Two-dimensional (2D) van der Waals (vdW) AIIIBVI semiconductor materials, such as InSe and GaSe, are of considerable interest due to their potential use in various microelectronics applications. The range of properties of materials of this class can...
Crack-free binary SiOx:TiOy composite films with the refractive index of ~1.94 at wavelength 632.8 nm were fabricated on soda-lime glass substrates, using the sol–gel method and dip-coating technique. With the use of transmission spectrophotome...
Extensive research on organic solar cells (OSCs) over the past decade has led to efficiency improvements exceeding 18%. Enhancing the efficacy of binary organic solar cells involves multiple factors, including the strategic selection of materials. Th...
The prospect of developing soluble and bioavailable Ti(IV) complex forms with physiological substrates, capable of influencing (patho)physiological aberrations, emerges as a challenge in the case of metabolism-related pathologies (e.g., diabetes mell...
The effect of the presence of ultra-fines (d < 10 μm) on the fluidization of a bed containing fine particles (d < 100 μm), is the subject of this paper. Practically, it can happen due to breakage or surface abrasion of the fine particles...
The main goal of this paper was to study the dielectric properties of hybrid binary and ternary composites based on biodegradable polymer Ecoflex®, single walled carbon nanotubes (SWCN), and liquid crystalline 4′-pentyl-4-biphenylcarbonitrile (5CB) c...
Owing to the intramolecular push-pull electron effect between the electron donor (D) unit and electron acceptor (A) unit, the D-A type based polymer donors display outstanding device performance. However, the imperfect energy levels lead to the D-A-t...
Yeast protein (YP) offers nutritional and sustainable benefits; however, its poor gelation properties limit its use in soft material formulations. This study investigates the rheological behavior and the formation of crosslinked networks using YP&nda...
The need for responsible electronics is leading to great interest in the development of new bio-based devices that are environmentally friendly. This work presents a simple and efficient process for the creation of conductive nanocomposites using ren...
Designing composite materials with tailored stiffness and toughness is challenging due to the massive number of possible material and geometry combinations. Although various studies have applied machine learning techniques and optimization methods to...
In recent years, multicomponent alloys with shape memory effects (SMEs), based on the ordered intermetallic compounds B2–TiNi, L21–Ni2MnGa, B2– and D03–Cu–Me (Me = Al, Ni, Zn), which represent a special important class o...
With the increasing market demands for wearable and portable electronic devices, binary metal oxides (BMOs) with a remarkable capacity and good structure stability have been considered as a promising candidate for fabricating coplanar micro-supercapa...
The degradability of the biocomposite produced from a binary mixture of thermoplastic banana starch (TPS) and polycaprolactone (PCL) reinforced with fique fibers (Fs) was evaluated in three different environments (soil, compost, water). An experiment...
The goal of finding efficient and safe hydrogen storage material motivated researchers to develop several materials to fulfil the demand of the U.S. Department of Energy (DOE). In the past few years, several metal hydrides, complex hydrides such as b...
To provide accurate transport properties of planetary alloys, we measure thermal diffusivity (D) within ±2%–3% from room temperature (T) to ~1600 K of three nearly pure Fe metals, two Ni metals, nine iron meteorites, two Fe-Ni alloys, an...
The increasing interest in metamaterials stems from the ability to expand the design space for material properties by tailoring the material architecture. Spinodal decomposition-inspired topologies are an emerging class of minimal surface-based metam...
Concrete 3D printing has the potential to reduce material and process waste in construction. Thus, it contributes to making the construction industry more sustainable through the use of digital-fabrication technologies. While concrete 3D printing is...
With the growth of 3D printing in the production space, it is inevitable that quality assurance will be needed to keep final products within the constraints of requirements. Also, the variety of materials that can be used with 3D printing has increas...
Organic solar cells (OSCs) are made from carbon-rich organic compounds with low environmental impacts, unlike the silicon in traditional solar panels. Some of these organic materials can be broken down and reprocessed, enabling the recovery of valuab...
of 4