- Article
Capacitor-powered resonant inverters are often employed in pulsed-power applications to feed an equivalent series resistance–inductance–capacitance (RLC) load with time-varying component values. Establishing the short-time dynamics of suc...
Capacitor-powered resonant inverters are often employed in pulsed-power applications to feed an equivalent series resistance–inductance–capacitance (RLC) load with time-varying component values. Establishing the short-time dynamics of suc...
The RLC circuit is a basic building block of the more complicated electrical circuits and networks. The present study introduces a novel and simple numerical method for the solution this problem in terms of Taylor polynomials in the matrix form. Part...
This review systematically examines recent advances in self-powered wireless sensing technologies based on triboelectric nanogenerators (TENGs), focusing on innovative methods that leverage breakdown discharge effects to achieve high-precision and lo...
This paper aims to unveil the symmetry–asymmetry transition mechanisms in transient fault waveforms of offshore wind power AC/DC transmission systems, addressing the critical limitation of traditional simulation methods of the fact that they ca...
Most simulations involving metamaterials often require complex physics to be solved through refined meshing grids. However, it can prove challenging to simulate the effect of local physical conditions created by said metamaterials into much wider com...
In this study, we focus on the stability analysis of the RLC model by employing differential equations with Hadamard fractional derivatives. We prove the existence and uniqueness of solutions using Banach’s contraction principle and Schaefer&rs...
The seismo-electrical coupling is critical to understand the mechanism of geoelectrical precursors to earthquakes. A novel seismo-electrical model, called Chen–Ouillon–Sornette (COS) model, has been developed by combining the Burridge–Knopoff spring-...
The importance of micro-electromechanical systems (MEMS) for radio-frequency (RF) applications is rapidly growing. In RF mobile-communication systems, MEMS-based circuits enable a compact implementation, low power consumption and high RF performance,...
The aroused quest to reduce the delay at the interconnect level is the main urge of this paper, so as to come across a configuration of carbon nanotube (CNT) bundles, namely, squarely packed bundles of mixed CNTs. The demonstrated approach in this pa...
This study focuses on mimicking constitutive phosphorylation in the N-terminus of the myosin regulatory light chain (S15D-RLC) as a rescue strategy for mutation-induced cardiac dysfunction in transgenic (Tg) models of restrictive (RCM) and dilated (D...
The rapid spread of capitalism in rural areas has facilitated rural land commodification (RLC). While some scholars have studied RLC, few have analyzed its spatial characteristics. Taking Shijiazhuang city as a study area, this paper applies Moran&rs...
Heart failure (HF) as a result of myocardial infarction (MI) is a major cause of fatality worldwide. However, the cause of cardiac dysfunction succeeding MI has not been elucidated at a sarcomeric level. Thus, studying the alterations within the sarc...
In internal combustion engines (ICEs), the frictional performance of ring-liner conjunction (RLC) has drawn special attention because it greatly affects the fuel efficiency of the engines. In recent years, surface texture (i.e., micro dimples or groo...
Radix Angelica Sinensis (RAS) and Rhizome Ligusticum (RLC) combination is a popular herb pair commonly used in clinics for treatment of blood deficiency syndrome in China. The aim of this study is to compare the pharmacokinetic properties of ferulic...
In this paper, we study the implications of using a form of network coding known as Random Linear Coding (RLC) for unicast communications from an economic perspective by investigating a simple scenario, in which several network nodes, the users, down...
This paper delves into an examination of the existence, uniqueness, and stability properties of a non-local integro-differential equation featuring the Hilfer fractional derivative with order
This paper deals with a magnetorheological damper-based vibration reduction system (MRD-VRS) with an energy harvesting ability. Together with the vibration-isolated object, the MRD-VRS constitutes a mechanical system with one degree of freedom (1DOF)...
For electronic products, printed circuit boards are employed to fix integrated circuits (ICs) and connect all ICs and electronic components. This allows for the smooth transmission of electronic signals among electronic components. Machine learning (...
Federated learning (FL) is a distributed machine learning paradigm that enables a large number of clients to collaboratively train models without sharing data. However, when the private dataset between clients is not independent and identically distr...
Accurate modeling of RF capacitors and inductors is critical for predicting circuit behavior and ensuring operational robustness in high-frequency electronic systems. However, SPICE models are often unavailable from manufacturers, and there is still...
Compact double notch coplanar and microstrip bandstop filters are described. They are based on a version of the open interconnected split ring resonator (OISRR) integrated in microstrip or coplanar waveguides. The OISRR introduces an RLC resonator co...
It is necessary to develop new drilling and breaking technology for hard rock construction. However, the process of high-voltage electro-pulse (HVEP) rock-breaking is complex, and the selection of electro-pulse boring (EPB) process parameters lacks a...
The resonance performance analysis of graphene antennas is a challenging problem for full-wave electromagnetic simulators due to the trade-off between the computer resource and the accuracy of results. In this paper, an equivalent circuit model is pr...
Valve switching is one of the most important power losses in digital hydraulics. In this paper, a dynamic Zero-Flowrate-Switching (ZFS) control method is developed for hydraulic/pneumatic systems. The proposed control strategy is to actively reduce t...
In this work we obtain analytical solutions for the electrical RLC circuit model defined with Liouville–Caputo, Caputo–Fabrizio and the new fractional derivative based in the Mittag-Leffler function. Numerical simulations of alternative models are pr...
DC short-circuit faults are one of the challenges for modular multilevel converter (MMC) based DC grid. It is vital for proper design of protection system to estimate the fault currents and voltages. The existing calculation methods based on RLC equi...
This work presents the Theory of Spacetime Impedance (TSI), a phenomenological framework in which the vacuum is modeled as a distributed reactive medium with an effective RLC structure. At the classical level, the vacuum is characterized by permeabil...
Electromagnetic implosions of hollow lithium cylinders can be utilized to compress magnetized plasma targets in the context of Magnetized Target Fusion (MTF). Two small-scale experiments were conducted at General Fusion as a stepping stone toward com...
Starting from a rigorous finite mass, Dirac equation-based model, we investigate the R.F. quantum admittance of a monolayer 2D material under the action of an electromagnetic (e.m.) wave with axially directed vector potential. With some reasonable ap...
Bioactive compounds in plant-based food have protective effects against metabolic alterations, including non-alcoholic fatty liver disease (NAFLD). Bean leaves are widely cultivated in the world and are a source of dietary fiber and polyphenols. High...
The aim of this theoretical research is to analyze the state of retail distribution nowadays, reviewing the dynamics of action that contribute to the move from a linear to an incipient circular retail model. The framework is based on the Retail Wheel...
Infrared line-scanning images have high redundancy and large file sizes. In JPEG2000 compression, the MQ arithmetic encoder’s complexity slows down processing. Huffman coding can achieve O(1) complexity based on a code table, but its integer-bi...
Second-hand trading platforms have become an important channel for advancing circular economy practices in China. Yet prior research has paid more attention to the benefits of platform use than to the burdens that may undermine continued participatio...
In this work, a 1200V/200A full-SiC half-bridge power module was fabricated for high-power high-frequency application, and the characteristics of gate-source voltage (
A power transformer is an essential device for stable and reliable power transfer to customers. Therefore, accurate modeling of transformers is required for simulation-based analysis with the model. The paper proposes an efficient and straightforward...
The article presents a comprehensive determination and analysis of the dynamic accuracy of the AC traction network–pantograph interface using an equivalent lumped-parameter RLC model derived from a distributed-parameter representation of the tr...
While transformer-type conductivity sensors are the usual type of inductive sensors, this paper describes the theory behind less used eddy current sensors. This type of sensor measures the conductivity of a liquid by inducing eddy currents and observ...
A new co-simulation method is proposed for active devices and electromagnetic resonant circuits at microwave frequency range. For the measured and extracted device parameters, three steps of equivalent circuit models are processed of the general, sim...
In this study, we significantly extend the concept of modular metric-like spaces to introduce the notion of b-metric-like spaces. Furthermore, by incorporating a binary relation
The dielectric resonator antenna (DRA) can be modeled as a series and parallel combination of electrical networks consisting of a resistor (R), inductor (L), and capacitor (C) to address peculiar challenges in antennas suitable for application in eme...
Envelope modeling is an efficient way to obtain the large-signal amplitude and phase dynamics of fast-varying sinusoidal signals required for, e.g., resonant frequency tracking or energy transfer rate regulation in power converters. In addition, the...
This paper presents a modeling practical works project of electrical engineering, proposed to the first-year students of the University Institute of Technology in France, during the COVID-19 pandemic. The objective of this paper is twofold. The first...
In this paper, two ultra-wideband monopoles in a colinear structure are presented for application in remote terrestrial communication systems. The antennas consist of a loaded monopole with a hat and an elevated loaded monopole located in the upper p...
Due to system complexity, research on fuzzy fractional-order, singular perturbation, multi-agent systems (FOSPMASs) remains limited in control theory. This article focuses on the leader-following consensus of fuzzy FOSPMASs with orders in the range o...
We study the origin of unusually persistent microwave and X-ray radiation from the ultracool dwarf TVLM 513-46546. It is shown that the source of ≈1 keV X-ray emission is not the entire corona of the brown dwarf, but a population of several hun...
The calculation of frequency-dependent cable parameters is essential for simulations of transient phenomena in electrical power systems. The simulation of transients is more complicated than the calculation of currents and voltages in the nominal fre...
Single-sided linear induction motors usually appear in magnetic levitation systems of transportation. Since the beginning of such developments, edge effects represent one of the great challenges to overcome in analytical modelling. For almost four de...
The model presented by Gabriel Kron in 1945 is an example of an analog computer simulating quantum phenomena on a hardware level. It uses passive RLC elements to construct a hardware solver for the problem of quantum particles confined by rectangular...
Dry band formation on the surface of outdoor insulators is one of the main reasons leading to flashover and power outages. In this paper, a dynamic arc model is proposed for single and multiple dry bands configuration to predict the critical flashove...
This work consists in the process of preparing magnetic active composite materials based on cotton fibers, iron carbonyl microparticles and barium titanate nanoparticles, and the electrical devices manufactured with them. For different compositions o...
of 3