Skip to Content

100,349 Results Found

  • Article
  • Open Access
23 Citations
5,486 Views
13 Pages

12 August 2021

An optimally-tuned PID control for a transport robot actuator based on an induction motor was developed. Continuous-discrete and continuous mathematical models of the actuator were obtained. The parametric synthesis of PID controller on the basis of...

(This article belongs to the Section Actuators for Manufacturing Systems)
  • Review
  • Open Access
11 Citations
3,839 Views
12 Pages

Separation membranes have a wide application in the food industry, for instance, in the clarification/fractionation of milk, the concentration/separation of selected components, and wastewater treatment. They provide a large area for bacteria to atta...

(This article belongs to the Special Issue Biofilm Formation and Control in Membrane Systems for Water and Wastewater Treatment)
  • Article
  • Open Access
682 Views
24 Pages

This paper presents a control system for a powder sintering machine utilizing the alternating current (AC) sintering technique assisted by uniaxial compression. The AC flows simultaneously through both the sintered material and the die assembly. The...

(This article belongs to the Section Advanced Manufacturing)
  • Article
  • Open Access
3 Citations
1,092 Views
22 Pages

Methodology to Develop a Discrete-Event Supervisory Controller for an Autonomous Helicopter Flight

  • James Horner,
  • Tanner Trautrim,
  • Cristina Ruiz Martin,
  • Iryna Borshchova and
  • Gabriel Wainer

10 October 2025

The National Research Council Canada (NRC) is actively engaged in the development of an advanced autonomy system for the Bell 412 helicopter. This system’s capabilities extend to the execution of complex missions, such as arctic resupply missio...

(This article belongs to the Section Aeronautics)
  • Feature Paper
  • Article
  • Open Access
2 Citations
3,058 Views
15 Pages

Modeling the Dynamics of Prosthetic Fingers for the Development of Predictive Control Algorithms

  • José Vicente García-Ortíz,
  • Marta C. Mora and
  • Joaquín Cerdá-Boluda

16 October 2024

In the field of biomechanical modeling, the development of a prosthetic hand with dexterity comparable to the human hand is a multidisciplinary challenge involving complex mechatronic systems, intuitive control schemes, and effective body interfaces....

(This article belongs to the Section E2: Control Theory and Mechanics)
  • Editorial
  • Open Access
4 Citations
3,044 Views
8 Pages

Arthropod-Borne Disease Control at a Glance: What’s New on Drug Development?

  • Giovanni Benelli,
  • Riccardo Petrelli and
  • Angelo Canale

6 November 2020

Discovering and validating effective drugs to manage arthropod-borne diseases (ABD) is a timely and important research challenge with major impacts on real-world control programs at the time of quick resistance development in the targeted pathogens....

(This article belongs to the Section Natural Products Chemistry)
  • Editorial
  • Open Access
3 Citations
3,784 Views
5 Pages

23 May 2018

This Special Issue (SI) of Applied Sciences on Development and Application of Nonlinear

Dissipative Devices in Structural Vibration Control contains papers that focus on the development

and application of innovative nonlinear dissipative systems that m...

(This article belongs to the Special Issue Development and Application of Nonlinear Dissipative Device in Structural Vibration Control)
  • Article
  • Open Access
2 Citations
2,150 Views
28 Pages

18 August 2025

In this paper, the virtual model development and control for a BallBot Robotic System (BRS) are addressed. A virtual three-dimensional (3-D) EV3 BRS (EV3BRS) model is here developed through the Simscape™ Multibody™ environment from a BRS...

(This article belongs to the Special Issue Modeling and Simulation of Robot Intelligent Control System)
  • Article
  • Open Access
19 Citations
6,055 Views
19 Pages

28 May 2020

Our developed wire ultrasound surgical instrument comprises a bolt-clamped Langevin ultrasonic transducer (BLUT) fabricated by PMN-PZT single crystal material due to high mechanical quality factor and electromechanical coupling coefficient, a wavegui...

(This article belongs to the Special Issue Ultrasonic Sensors 2019–2020)
  • Article
  • Open Access
9 Citations
2,149 Views
19 Pages

Development and Testing of the Adaptive Control System for Profiling Grain Header

  • Yi Niu,
  • Ruixue Li,
  • Wei Liu,
  • Kai Rong and ,
  • Haoxuan Hong and
  • Guohai Zhang
  • + 1 author+ 0 author

22 February 2025

In the harvesting operation, the stubble height of the grain is a vital parameter index in the combined harvesting operation; if the stubble is too high or too low, it will directly affect the harvesting quality and the service life of the header. At...

(This article belongs to the Section Agricultural Technology)
  • Article
  • Open Access
573 Views
31 Pages

16 May 2026

The purpose of this study is to develop a computationally efficient deep learning-based control framework for high-degree-of-freedom exoskeleton robots to address the real-time computational limitations associated with conventional model-based contro...

(This article belongs to the Special Issue Design and Control of Mechatronic Systems for Biomedical and Rehabilitation Applications)
  • Article
  • Open Access
17 Citations
5,162 Views
19 Pages

Development of an Online Quality Control System for Injection Molding Process

  • Ming-Hong Tsai,
  • Jia-Chen Fan-Jiang,
  • Guan-Yan Liou,
  • Feng-Jung Cheng and ,
  • Sheng-Jye Hwang,
  • Hsin-Shu Peng and
  • Hsiao-Yeh Chu
  • + 2 authors+ 0 author

15 April 2022

This research developed an adaptive control system for injection molding process. The purpose of this control system is to adaptively maintain the consistency of product quality by minimize the mass variation of injection molded parts. The adaptive c...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
8 Citations
7,515 Views
22 Pages

15 November 2012

A constant minimum airflow rate is used in conventional Single Duct Variable Air Volume Terminal Box control sequences. This control sequence can cause occupant discomfort or use excessive energy under partial load conditions. If the minimum airflow...

(This article belongs to the Special Issue Energy Efficient Buildings and Green Buildings)
  • Review
  • Open Access
78 Citations
14,572 Views
40 Pages

13 July 2015

Many plant pathogens show interactions with host development. Pathogens may modify plant development according to their nutritional demands. Conversely, plant development influences pathogen growth. Biotrophic pathogens often delay senescence to keep...

(This article belongs to the Special Issue Plant Senescence)
  • Review
  • Open Access
12 Citations
4,330 Views
20 Pages

Research Progress on the Development of the Planter Unit for Furrowing Control and the Depth Measurement Technology

  • Hang Li,
  • Jin He,
  • Chao Wang,
  • Wenchao Yang and ,
  • Han Lin,
  • Quanyu Wang,
  • Hanyu Yang and
  • Lu Tan
  • + 3 authors+ 0 author

30 October 2023

The article briefly describes the importance of furrowing depth stability for seed germination and growth under precision seeding conditions. By analyzing the application status of furrowing depth control technology of the planter globally, the resea...

(This article belongs to the Special Issue Feature Review Papers in Agricultural Science and Technology)
  • Article
  • Open Access
15 Citations
4,348 Views
29 Pages

26 November 2023

This paper introduces a Reusable Launch Vehicle (RLV) descent dynamics simulator coupled with closed-loop guidance and control (G&C) integration. The studied vehicle’s first-stage booster, evolving in the terrestrial atmosphere, is steered...

(This article belongs to the Section Astronautics & Space Science)
  • Article
  • Open Access
4 Citations
2,627 Views
29 Pages

Development of a Control-Oriented Ignition Delay Model for GCI Combustion

  • Giacomo Silvagni,
  • Vittorio Ravaglioli,
  • Stefania Falfari,
  • Fabrizio Ponti and
  • Valerio Mariani

5 September 2022

Increasingly stringent pollutant emission limits and CO2 reduction policies are forcing the automotive industry toward cleaner and decarbonized mobility. The goal is to achieve carbon neutrality within 2050 and limit global warming to 2 °C (possi...

(This article belongs to the Section I2: Energy and Combustion Science)
  • Article
  • Open Access
2 Citations
1,534 Views
15 Pages

Development of Xanthyletin-Loaded Nanoparticles for the Control of Leucoagaricus gongylophorus

  • Cristiane de Melo Cazal,
  • Moacir Rossi Forim,
  • Ana Paula Terezan,
  • Andreia Pereira Matos and ,
  • Gracielle Oliveira Sabbag Cunha,
  • Maria Fátima das Graças Fernandes da Silva,
  • Paulo Cezar Vieira,
  • Fernando Carlos Pagnocca and
  • João Batista Fernandes
  • + 4 authors+ 0 author

This study describes the development, characterization and in vitro evaluation of poly(ε-caprolactone) (PCL) nanoparticles loaded with xanthyletin for the control of Atta sexdens rubropilosa through the inhibition of its symbiotic fungus Leuc...

  • Article
  • Open Access
9 Citations
4,669 Views
24 Pages

Development of Online Adaptive Traction Control for Electric Robotic Tractors

  • Idris Idris Sunusi,
  • Jun Zhou,
  • Chenyang Sun,
  • Zhenzhen Wang and ,
  • Jianlei Zhao and
  • Yongshuan Wu
  • + 1 author+ 0 author

9 June 2021

Estimation and control of wheel slip is a critical consideration in preventing loss of traction, minimizing power consumptions, and reducing soil disturbance. An approach to wheel slip estimation and control, which is robust to sensor noises and mode...

(This article belongs to the Special Issue Control Design for Electric Vehicles)
  • Article
  • Open Access
2 Citations
3,599 Views
15 Pages

Develop Control Architectures to Enhance Soft Actuator Motion and Force

  • Mustafa Hassan,
  • Mohammed Ibrahim Awad and
  • Shady A. Maged

Study: Soft robots can achieve the desired range of motion for finger movement to match their axis of rotation with the axis of rotation of the human hand. The iterative design has been used to achieve data that makes the movement smooth and the rang...

(This article belongs to the Special Issue Advanced Information, Computation, and Control Systems for Distributed Environments)
  • Perspective
  • Open Access
4 Citations
2,573 Views
29 Pages

Development and New Challenges of Sensorless Control for Permanent Magnet Synchronous Motors

  • Quntao An,
  • Mengji Zhao,
  • Yuzhuo Lu,
  • Hongwei Wang and ,
  • Shiling Zhu and
  • Xiangxu Zhang
  • + 1 author+ 0 author

23 February 2026

Permanent magnet synchronous motors (PMSMs) are widely used in various fields due to their high efficiency and power density. To further enhance reliability and reduce cost and volume, sensorless control techniques have been extensively investigated...

(This article belongs to the Section F: Electrical Engineering)
  • Review
  • Open Access
66 Citations
31,628 Views
20 Pages

Haemonchosis in Sheep and Goats, Control Strategies and Development of Vaccines against Haemonchus contortus

  • Isabella Adduci,
  • Floriana Sajovitz,
  • Barbara Hinney,
  • Katharina Lichtmannsperger and ,
  • Anja Joachim,
  • Thomas Wittek and
  • Shi Yan
  • + 2 authors+ 0 author

8 September 2022

The evolutionary success of parasitic worms causes significant economic losses and animal health problems, including in the small ruminant industry. The hematophagous nematode Haemonchus contortus is a common endoparasite that infects wild and domest...

(This article belongs to the Special Issue Parasite Diseases in Small Ruminants)
  • Feature Paper
  • Article
  • Open Access
10 Citations
6,251 Views
20 Pages

Development of Hardware-in-the-Loop-Simulation Testbed for Pitch Control System Performance Test

  • Jongmin Cheon,
  • Jinwook Kim,
  • Joohoon Lee,
  • Kichang Lee and
  • Youngkiu Choi

27 May 2019

This paper deals with the development of a wind turbine pitch control system and the construction of a Hardware-in-the-Loop-Simulation (HILS) testbed for the performance test of the pitch control system. When the wind speed exceeds the rated wind spe...

(This article belongs to the Special Issue Design, Fabrication and Performance of Wind Turbines 2019)
  • Article
  • Open Access
1,134 Views
22 Pages

As a selected participant in the EcoCAR2: Plugging In to the Future competition, headline sponsored by General Motors and the US Department of Energy, the Rose-Hulman team has completed the second year of a three year design cycle. This paper focuses...

  • Article
  • Open Access
4 Citations
1,604 Views
8 Pages

24 September 2010

A function modularization control system is established for the vehicle with a new full hybrid power-train structure consisting of two electric motors and a set of coupling device. Control strategies based on ICE optimized operation schedule are util...

  • Review
  • Open Access
14 Citations
4,520 Views
13 Pages

Development and Application of Attenuated Plant Viruses as Biological Control Agents in Japan

  • Yasuhiro Tomitaka,
  • Yoshifumi Shimomoto,
  • Bo-Song Ryang,
  • Kazusa Hayashi and ,
  • Tomoka Oki,
  • Momoko Matsuyama and
  • Ken-Taro Sekine
  • + 2 authors+ 0 author

27 March 2024

In 1929, it was reported that yellowing symptoms caused by a tobacco mosaic virus (TMV) yellow mosaic isolate were suppressed in tobacco plants that were systemically infected with a TMV light green isolate. Similar to vaccination, the phenomenon of...

(This article belongs to the Special Issue Crop Resistance to Viral Infections)
  • Article
  • Open Access
8 Citations
4,546 Views
19 Pages

20 August 2024

Using soft materials in robotic mechanisms has become a common solution to overcome many challenges associated with the rigid bodies frequently used in robotics. Compliant mechanisms allow the robot to adapt to objects and perform a broader range of...

(This article belongs to the Section Robotics and Automation)
  • Article
  • Open Access
2 Citations
2,874 Views
11 Pages

Development of an Intelligent Voltage Control System for Bulk Power Systems

  • Heungjae Lee,
  • Wonkun Yu,
  • Junghyun Oh,
  • Hyungsuk Kim and
  • Jinyoung Kim

4 October 2021

As modern power systems become large and complicated, an automated voltage and reactive power control system is required in most developed countries due to the remarkable recent progress in computer networks and information technology. To date, volta...

(This article belongs to the Section Energy Science and Technology)
  • Review
  • Open Access
211 Citations
14,365 Views
15 Pages

11 July 2019

Essential oil (EO) encapsulation can be carried out via a multitude of techniques, depending on applications. Because of EOs’ biological activities, the development of biosourced pesticides with EO encapsulation is of great interest. A lot of m...

(This article belongs to the Special Issue Essential Oils in Weed Control and Food Preservation)
  • Article
  • Open Access
12 Citations
9,983 Views
16 Pages

12 September 2016

Rapid growth in economies and a sharp increase in the present quantity of vehicles have contributed to congested cities, traffic accidents, energy crises and air pollution, which not only cause serious economic damage but also affect human life and s...

(This article belongs to the Special Issue New Inventions in Vehicular Guidance and Control)
  • Proceeding Paper
  • Open Access
430 Views
8 Pages

The paper discusses some important microcontroller board features in the application context of laser projection systems, which include measuring temperature and humidity by analog and digital sensors, controlling internal and external devices accord...

(This article belongs to the Proceedings of The 15th International Scientific Conference TechSys 2026—Engineering, Technologies and Systems)
  • Review
  • Open Access
12 Citations
4,669 Views
21 Pages

Technological Developments in Control Models Using Petri Nets for Smart Grids: A Review

  • Jose Ulises Castellanos Contreras and
  • Leonardo Rodríguez Urrego

19 April 2023

Nowadays, energy generation systems that include renewable energies, substations, distribution, transmission, control, measurement, and storage applications, among others, and are interrelated are known as Smart Grids. All these techniques and techno...

  • Article
  • Open Access

16 November 2026

Modern power systems are faced with increasing uncertainty due to the integration of renewable energy and distributed generation. This complicates emergency control. Traditional methods are ineffective in non-design conditions. The goal of the study...

(This article belongs to the Special Issue Mathematical Applications in Electrical Engineering, 2nd Edition)
  • Article
  • Open Access
2 Citations
3,919 Views
15 Pages

Real Time Predictive and Adaptive Hybrid Powertrain Control Development via Neuroevolution

  • Frederic Jacquelin,
  • Jungyun Bae,
  • Bo Chen,
  • Darrell Robinette and ,
  • Pruthwiraj Santhosh,
  • Troy Kraemer and
  • Bonnie Henderson
  • + 2 authors+ 0 author

22 September 2022

The real-time application of powertrain-based predictive energy management (PrEM) brings the prospect of additional energy savings for hybrid powertrains. Torque split optimal control methodologies have been a focus in the automotive industry and aca...

(This article belongs to the Special Issue Feature Papers in Vehicles)
  • Article
  • Open Access
53 Citations
3,305 Views
10 Pages

4 September 2022

This work is aimed at developing methods for increasing the production of heavy crude oil while optimizing energy costs. Various methods have been studied for recovering heavy oil from deep reservoirs. Based on the developed methods, a number of dyna...

(This article belongs to the Special Issue Geotechnologies and Structures in the Energy Sector)
  • Review
  • Open Access
19 Citations
10,342 Views
17 Pages

29 October 2019

Translation of mRNA is an important process that controls cell behavior and gene regulation because proteins are the functional molecules that determine cell types and function. Cancer develops as a result of genetic mutations, which lead to the prod...

(This article belongs to the Section Biomacromolecules: Proteins, Nucleic Acids and Carbohydrates)
  • Review
  • Open Access
40 Citations
12,411 Views
53 Pages

10 August 2022

Interest in soft gloves, both robotic and haptic, has enormously grown over the past decade, due to their inherent compliance, which makes them particularly suitable for direct interaction with the human hand. Robotic soft gloves have been developed...

(This article belongs to the Special Issue Artificial Muscles for Biorobotics: Study, Application and Future Perspectives)
  • Article
  • Open Access
19 Citations
4,138 Views
17 Pages

6 January 2021

In this study, an optimal control strategy for the variable refrigerant flow (VRF) system is developed using a data-driven model and on-site data to save the building energy. Three data-based models are developed to improve the on-site applicability....

(This article belongs to the Special Issue Advanced Control Strategies for Buildings and HVAC Systems)
  • Review
  • Open Access
30 Citations
8,902 Views
27 Pages

Traditional printed products have to some extent affected the development of smart structures and their application in multiple fields, especially in harsh environments, due to their complex mechanisms and control principles. The 4D printing technolo...

(This article belongs to the Section Magnetic Materials)
  • Article
  • Open Access
4 Citations
4,071 Views
27 Pages

5 September 2022

Due to the actual level of carbon emissions, climate change causes disruptions in business process development and also affects human health. The obvious solution, which will ensure a future for the coming generations, is related to sustainable devel...

(This article belongs to the Special Issue Job Design for Human and Organisational Sustainability in the Context of Emerging Technologies)
  • Article
  • Open Access
8 Citations
2,860 Views
18 Pages

With the growing demand for advanced control algorithms in permanent magnet synchronous motor (PMSM) speed regulation, active disturbance rejection control (ADRC) has garnered significant attention for its simplicity and effectiveness as an alternati...

(This article belongs to the Special Issue New Journey of Energy and Electric Vehicle Revolutions—Infinite Possibilities in the Science World: In Honor of Prof. Dr. C.C. Chan’s 90th Birthday)
  • Proceeding Paper
  • Open Access
198 Views
9 Pages

Development of a Control System for an Electric Fuel Pump for an Ultra-Light Launch Vehicle

  • Kenzhebek Myrzabekov,
  • Kuanysh Alipbayev,
  • Akylbek Bapyshev,
  • Teodor Iliev and
  • Alina Fazylova

3 September 2026

This article discusses the development of a control system for an electric propellant pump for a light-lift launch vehicle. The relevance of this work stems from the need to create compact and energy-efficient propellant supply systems capable of ens...

(This article belongs to the Proceedings of The International Conference on Electronics, Engineering Physics and Earth Science (EEPES2026))
  • Article
  • Open Access
3 Citations
4,239 Views
18 Pages

Design, Development and Control of a Therapeutic Robot Incorporating Aquatic Therapy for Ankle Rehabilitation

  • César H. Guzmán-Valdivia,
  • Oscar Madrigal-López,
  • Omar Désiga-Orenday,
  • Jorge Talavera-Otero and ,
  • Jorge A. Brizuela-Mendoza,
  • César A. Chávez-Olivares,
  • Oscar Cruz-Domínguez,
  • Andrés Blanco-Ortega,
  • Javier Alejandro Berumen-Torres and
  • Fabio Abel Gómez-Becerra
  • + 5 authors+ 0 author

26 October 2021

The simple act of walking can occasionally cause ankle sprains. Traditionally, the rehabilitation of a sprained ankle involves physical therapy. Physical therapy is one of the health professions that help regain mobility through manual exercises. Aqu...

  • Article
  • Open Access
1 Citations
1,981 Views
16 Pages

14 August 2024

The closed architecture of modern control systems impedes them from further development in the environment of the industrial IoT. The open control system is proposed to tackle this issue. Numerous open control prototypes have been proposed, but they...

  • Article
  • Open Access
19 Citations
14,421 Views
17 Pages

20 April 2018

This research developed a novel proportional pressure control valve for an automobile hydraulic braking actuator. It also analyzed and simulated solenoid force of the control valves, and the pressure relief capability test of electromagnetic thrust w...

(This article belongs to the Special Issue Power Transmission and Control in Power and Vehicle Machineries)
  • Article
  • Open Access
6 Citations
3,855 Views
16 Pages

Development of a Conveyor Cart with Magnetic Levitation Mechanism Based on Multi Control Strategies

  • Xiaowei Tang,
  • Seiji Hashimoto,
  • Nobuyuki Kurita,
  • Takahiro Kawaguchi and ,
  • Eiji Ogiwara,
  • Nobuya Hishinuma and
  • Keisuke Egura
  • + 2 authors+ 0 author

29 September 2023

This paper presents the experimental magnetic levitation control development of Sanki Engineering airport luggage conveyor carts which have four magnetic levitation units working synchronously. With the PID controller, the state feedback controller a...

(This article belongs to the Special Issue Electric Power Applications II)
  • Article
  • Open Access
2,599 Views
15 Pages

19 December 2022

In this paper, an innovative approach to the development of a skew control system is discussed to increase the speed and quality of the development of this system. To achieve this goal, we chose the Hardware-in-the-Loop simulation method, which invol...

  • Review
  • Open Access
12 Citations
4,153 Views
34 Pages

1 December 2021

The development of cooperative control strategies for microgrids has become an area of increasing research interest in recent years, often a result of advances in other areas of control theory such as multi-agent systems and enabled by rapid advances...

(This article belongs to the Topic Innovative Techniques for Smart Grids)
  • Review
  • Open Access
13 Citations
5,783 Views
26 Pages

Role of DSCAM in the Development of Neural Control of Movement and Locomotion

  • Maxime Lemieux,
  • Louise Thiry,
  • Olivier D. Laflamme and
  • Frédéric Bretzner

Locomotion results in an alternance of flexor and extensor muscles between left and right limbs generated by motoneurons that are controlled by the spinal interneuronal circuit. This spinal locomotor circuit is modulated by sensory afferents, which r...

(This article belongs to the Special Issue Neuronal Control of Locomotion)
  • Article
  • Open Access
7 Citations
6,446 Views
12 Pages

1 March 2024

Since the Software Quality Model was defined as an international standard, many quality assurance teams have used this quality model in a waterfall model for software development and quality control. As more software is delivered as a cloud service,...

(This article belongs to the Special Issue “Management of Digital Ecosystems”: Dedicated to the Memory of Prof. William I. Grosky 8/4/1944–11/13/2020)

of 2,007