Skip to Content

20,316 Results Found

  • Article
  • Open Access
6 Citations
11,008 Views
9 Pages

A new type of permanent magnet (PM) brushless claw pole motor (CPM) with soft magnetic composite (SMC) core is designed and analyzed in this paper. The PMs are mounted on the claw pole surface, and the three-phase stator windings are fed by variable-...

  • Feature Paper
  • Article
  • Open Access
25 Citations
7,501 Views
22 Pages

3 July 2017

This paper presents a systematic approach for the design of post-transmission hybrid electric vehicle powertrains, as an instrument aiding the designer in making the right decision. In particular, a post-transmission series/parallel hybrid electric p...

(This article belongs to the Special Issue Advances in Electric Vehicles and Plug-in Hybrid Vehicles 2017)
  • Article
  • Open Access
6 Citations
9,466 Views
17 Pages

18 September 2013

The time-average method currently available is limited to analyzing the specific performance of the automatic gain control-proportional and integral (AGC-PI) based velocity-controlled closed-loop in a micro-electro-mechanical systems (MEMS) vibratory...

(This article belongs to the Special Issue Modeling, Testing and Reliability Issues in MEMS Engineering 2011)
  • Article
  • Open Access
1 Citations
1,086 Views
24 Pages

As a highly integrated and compact power unit, the motor-pump finds critical applications in emerging electric vehicle (EV) domains such as electro-hydraulic braking and steering systems, where its vibration and noise performance directly impacts cab...

(This article belongs to the Section Propulsion Systems and Components)
  • Article
  • Open Access
12 Citations
4,563 Views
15 Pages

Screening and Optimization of Fermentation Medium for Bacillus velezensis BP-1 and Its Biocontrol Effects against Peyronellaea arachidicola

  • Taswar Ahsan,
  • Chunhao Liang,
  • Shuyi Yu,
  • Xue Pei and ,
  • Jinhui Xie,
  • Ying Lin,
  • Xiaozhou Liu,
  • Muhammad Umair and
  • Chaoqun Zang
  • + 4 authors+ 0 author

7 April 2023

In the submerged fermentation process, the introduction of novel nutrient media as sources of carbon and nitrogen can enhance antifungal activity. In this study, we used a submerged fermentation process to find the optimal media for the Bacillus vele...

  • Article
  • Open Access
2 Citations
1,830 Views
20 Pages

Physicochemical and Techno-Functional Properties of Extruded Corn Starch Snacks Enriched with Huitlacoche (Ustilago maydis): Effects of Extrusion Parameters and Process Optimization

  • Betsabé Hernández-Santos,
  • Jesús Rodríguez-Miranda,
  • José M. Juárez-Barrientos,
  • Juan G. Torruco-Uco and ,
  • Emmanuel J. Ramírez-Rivera,
  • Erasmo Herman-Lara,
  • Carlos A. Gómez-Aldapa and
  • Ariana González-García
  • + 3 authors+ 0 author

10 September 2025

The main objective of this research was to evaluate the effect of extrusion temperature (ET), feed moisture content (FMC), and the proportion of huitlacoche relative to corn starch (HCP/Starch) on the physicochemical, techno-functional, and color pro...

(This article belongs to the Special Issue Advances in Process Detection and Control Technologies for Optimizing Food Processing)
  • Article
  • Open Access
1 Citations
664 Views
26 Pages

19 February 2026

The use of a corrugated steel plate shear wall (CSPSW) lateral load-bearing system in a steel moment frame (SMF) significantly increases the system’s energy absorption and stiffness. However, the design of CSPSWs involves many parameters and de...

(This article belongs to the Special Issue Applications of Computational Methods in Structural Engineering)
  • Abstract
  • Open Access
846 Views
2 Pages
  • Article
  • Open Access
10 Citations
6,116 Views
17 Pages

A Novel Design and Optimization Approach for Low Noise Amplifiers (LNA) Based on MOST Scattering Parameters and the gm/ID Ratio

  • Juan L. Castagnola,
  • Fortunato C. Dualibe,
  • Agustín M. Laprovitta and
  • Hugo García-Vázquez

This work presents a new design methodology for radio frequency (RF) integrated circuits based on a unified analysis of the scattering parameters of the circuit and the gm/ID ratio of the involved transistors. Since the scattering parameters of the c...

(This article belongs to the Section Microelectronics)
  • Article
  • Open Access
1 Citations
1,492 Views
32 Pages

14 August 2025

Ergonomic assessments for specialized vehicle cockpits are often costly, subjective, or fragmented. To address these issues, this study proposes and validates a quantifiable comprehensive evaluation method combining optical motion capture with simula...

(This article belongs to the Section Optical Sensors)
  • Review
  • Open Access
18 Citations
5,275 Views
30 Pages

29 November 2024

The incorporation of graphene into cellulose matrices has emerged as a promising strategy for enhancing the structural and functional properties of composite materials. This comprehensive review provides a critical analysis of recent advances in opti...

(This article belongs to the Section Material Sciences)
  • Article
  • Open Access
3 Citations
1,843 Views
22 Pages

Multiparameter Collaborative Optimization and Analysis of the Non-Penetrating Tunnel Thruster

  • Jinyu Guo,
  • Yi Yang,
  • Chao Wang,
  • Zhiqiang Hu and ,
  • Quan Zheng and
  • Chuanzhi Fan
  • + 1 author+ 0 author

1 November 2024

A brand new non-penetrating tunnel thruster (short for NPT thruster) is proposed in this paper. The tunnel structural parameters of the thruster are optimized, and the performance and optimization effect are verified by experiments. First, the design...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
13 Citations
3,044 Views
26 Pages

Numerical Optimization of Variable Blank Holder Force Trajectories in Stamping Process for Multi-Defect Reduction

  • Feng Guo,
  • Hoyoung Jeong,
  • Donghwi Park,
  • Geunho Kim and ,
  • Booyong Sung and
  • Naksoo Kim
  • + 1 author+ 0 author

27 May 2024

An intelligent optimization technology was proposed to mitigate prevalent multi-defects, particularly failure, wrinkling, and springback in sheet metal forming. This method combined deep neural networks (DNNs), genetic algorithms (GAs), and Monte Car...

(This article belongs to the Special Issue Structure and Mechanical Properties of Alloys, Volume III)
  • Article
  • Open Access
7 Citations
3,566 Views
17 Pages

Multi-Criteria Optimization of Laser Cladding: Integrating Process Parameters and Costs

  • Óscar Barro,
  • Felipe Arias-González,
  • Ana Mejías,
  • Fernando Lusquiños and ,
  • Daniel Wallerstein,
  • Jesús del Val,
  • Juan Pardo and
  • Juan Pou
  • + 3 authors+ 0 author

This study presents a novel approach in the laser cladding optimization field by integrating economic analysis with performance optimization. Despite extensive research on laser cladding technical performance, its economic evaluation—particular...

(This article belongs to the Special Issue Advances in Laser-Assisted Manufacturing Techniques)
  • Article
  • Open Access
15 Citations
2,843 Views
12 Pages

23 April 2025

This study aims to examine and optimize CO2 laser cutting parameters—namely, laser power, cutting speed, and focal plane position—when applied to polypropylene material using an experimental methodology. This research aims to improve cutt...

(This article belongs to the Special Issue Progress in Laser-Assisted Manufacturing and Materials Processing)
  • Article
  • Open Access
6 Citations
4,409 Views
23 Pages

A Systematic Approach for Robotic System Development

  • Simone Leone,
  • Francesco Lago,
  • Doina Pisla and
  • Giuseppe Carbone

This paper introduces a unified and systematic design methodology for robotic systems that is generalizable across a wide range of applications. It integrates rigorous mathematical formalisms such as kinematics, dynamics, control theory, and optimiza...

  • Article
  • Open Access
3 Citations
1,884 Views
28 Pages

Integration of Distributed Energy Resources in Unbalanced Networks Using a Generalized Normal Distribution Optimizer

  • Laura Sofía Avellaneda-Gómez,
  • Brandon Cortés-Caicedo,
  • Oscar Danilo Montoya and
  • Jesús M. López-Lezama

This article proposes an optimization methodology to address the joint placement as well as the capacity design of PV units and D-STATCOMs within unbalanced three-phase distribution systems. The proposed model adopts a mixed-integer nonlinear program...

  • Article
  • Open Access
2 Citations
1,435 Views
12 Pages

9 September 2025

This study proposes a multi-stage collaborative design framework integrating sensitivity analysis, response surface methodology (RSM), and topology optimization for synergistic lightweighting and performance enhancement of micromanufacturing systems...

(This article belongs to the Special Issue Ultra-Precision Surface Abrasive Micro-Machining: Advances and Applications)
  • Article
  • Open Access
33 Citations
12,150 Views
23 Pages

2 April 2020

Within the framework of blade aerodynamic design, the maximum aerodynamic efficiency, power production, and minimum thrust force are the targets to obtain. This paper describes an improved optimization framework for blade aerodynamic design under rea...

(This article belongs to the Special Issue Selected Papers from the 9th Asia-Pacific Forum on Renewable Energy (AFORE 2019))
  • Article
  • Open Access
9 Citations
3,462 Views
13 Pages

The aim of this research was to provide crucial and useful data about the selection of the optimization criteria of supercritical carbon dioxide extraction of alfalfa at a quarter-technical plant. The correlation between more general output, includin...

(This article belongs to the Special Issue Natural Plant Substances—Structural and Application Aspects: A Theme Issue in Honor of Professor Wieslaw Oleszek)
  • Article
  • Open Access
21 Citations
3,645 Views
13 Pages

Natural Rocks–Heterogeneous Catalysts for Oil Transesterification in Biodiesel Synthesis

  • Ieva Gaide,
  • Violeta Makareviciene,
  • Egle Sendzikiene and
  • Kiril Kazancev

16 March 2021

Some of the more recent methods to produce biodiesel are based on heterogeneous catalysis, which has the advantage of easy separation of catalyst from the final product. In this paper, the heterogeneous transesterification of rapeseed oil with methan...

(This article belongs to the Section Environmental Catalysis)
  • Article
  • Open Access
1 Citations
2,394 Views
15 Pages

20 November 2025

The optimization of biodiesel production through experimental design and statistical modeling carries significant industrial and economic benefits. The utilization of Response Surface Methodology (RSM) and statistical modeling permits accurate manipu...

(This article belongs to the Section Theoretical and Computational Chemistry)
  • Article
  • Open Access
74 Citations
6,770 Views
21 Pages

8 May 2023

This study explains the effect of ultrasound on the extraction of the bioactive compounds from garlic (Allium sativum L.) leaf powder. The experiment was carried out by varying the ultrasound amplitude (30–60%), treatment time (5–15 min), and ethanol...

(This article belongs to the Section Food Packaging and Preservation)
  • Article
  • Open Access
7 Citations
2,635 Views
17 Pages

18 February 2025

In order to achieve precise shaping control of FeCoNi + 1%Y2O3 laser-directed energy deposition (LDED) coatings and to reveal the influence of LDED process parameters on coating morphology, the response surface methodology (RSM) is employed in this s...

  • Article
  • Open Access
7 Citations
3,175 Views
23 Pages

15 March 2023

Basic oxygen furnace slag (BOFS) is a waste material generated during the steelmaking process and has the potential to harm both the environment and living organisms when disposed of in a landfill. However, the cementitious properties of BOFS might h...

(This article belongs to the Special Issue Research on Novel Sustainable Binders, Concretes and Composites)
  • Article
  • Open Access
43 Citations
2,520 Views
8 Pages

1 December 2013

The purpose of real-life problems is often to be able to find less expensive and more effective ways of production without compromising product quality because companies must provide competitive advantage to maintain existence. In order to improve qu...

  • Article
  • Open Access
2 Citations
1,406 Views
27 Pages

30 April 2025

Climate-change-induced extreme environments exacerbate pavement degradation in arid regions, where traditional concrete incurs 23~40% higher life-cycle costs due to premature cracking. Particularly in the Gobi Desert, concrete pavements suffer from c...

(This article belongs to the Special Issue Structural Mechanics in Materials and Construction)
  • Article
  • Open Access
14 Citations
3,855 Views
15 Pages

Development of Porous Titania Structure with Improved Photocatalytic Activity: Response Surface Modeling and Multi-Objective Optimization

  • Elvira Mahu,
  • Maria Ignat,
  • Corneliu Cojocaru,
  • Petrisor Samoila and ,
  • Cristina Coromelci,
  • Iuliean Asaftei and
  • Valeria Harabagiu
  • + 2 authors+ 0 author

Porous titania was successfully synthesized by an ultrasound-assisted sol-gel route. The synthesis process was empirically modeled and optimized using the response surface methodology (RSM). Input variables adopted for optimization dealt with the wei...

(This article belongs to the Special Issue 10th Anniversary of Nanomaterials—Recent Advances in Nanomaterials for Energy and Catalysis)
  • Article
  • Open Access
18 Citations
6,370 Views
23 Pages

30 August 2012

Finding out the optimal sampling positions for measurement of ventilation rates in a naturally ventilated building using tracer gas is a challenge. Affected by the wind and the opening status, the representative positions inside the building may chan...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
31 Citations
8,809 Views
15 Pages

Mathematic Modeling for Optimum Conditions on Aflatoxin B1 Degradation by the Aerobic Bacterium Rhodococcus erythropolis

  • Qing Kong,
  • Cuiping Zhai,
  • Bin Guan,
  • Chunjuan Li and ,
  • Shihua Shan and
  • Jiujiang Yu
  • + 1 author+ 0 author

6 November 2012

Response surface methodology was employed to optimize the degradation conditions of AFB1 by Rhodococcus erythropolis in liquid culture. The most important factors that influence the degradation, as identified by a two-level Plackett-Burman design wit...

(This article belongs to the Special Issue Mycotoxins in Food and Feed)
  • Article
  • Open Access
1 Citations
474 Views
21 Pages

15 July 2026

Continental mixed shale oil reservoirs are characterized by strong lithological heterogeneity, complex reservoir architecture, and highly variable hydraulic fracture propagation, making it difficult to simultaneously maximize hydrocarbon recovery and...

(This article belongs to the Topic Advances in Integrated Geological, Mineralogical, and Engineering Research on Unconventional Oil and Gas)
  • Article
  • Open Access
10 Citations
3,400 Views
18 Pages

8 March 2020

In order to improve the suspension and torque performance of a bearingless flywheel machine, a new type of axial split-phase bearingless flywheel machine with a magnetic sleeve and pole-shoe tooth is analyzed and optimized as described in this paper....

  • Article
  • Open Access
1 Citations
1,938 Views
16 Pages

21 September 2024

The preservation of the ancient seawall site is a focal point and challenge in the protection of historical relics along Hangzhou’s Grand Canal in China. This endeavor holds significant historical and contemporary value in uncovering and perpet...

  • Article
  • Open Access
4 Citations
1,811 Views
22 Pages

27 January 2025

Flux-switching wound field machines (FSWFMs) offer high torque density and independence from rare-earth materials, making them promising candidates for sustainable electric vehicles and industrial applications. However, their adoption is limited by c...

(This article belongs to the Section Electrical Machines and Drives)
  • Article
  • Open Access
1,779 Views
19 Pages

Improvement of the Culture Medium for Latilactobacillus sakei Exhibiting High Lactic Acid Production Isolated Using Response Surface Methodology

  • Zhirong Zhang,
  • Wanjing Hong,
  • Min Xu,
  • Zhongkai Yi and ,
  • Xu Yao,
  • Zhijiang Zhou and
  • Ye Han
  • + 2 authors+ 0 author

14 January 2026

Lactic acid is a crucial bio-based chemical with widespread applications in industries such as the food, chemical, bioplastic, and pharmaceutical industries. As demand for lactic acid rises, the search for efficient fermentation strains has become in...

(This article belongs to the Section Chemical Processes and Systems)
  • Article
  • Open Access
19 Citations
7,841 Views
18 Pages

This study aimed to use waste figs as an alternative substrate for bacterial cellulose (BC) production by Komagataeibacter xylinus and optimize the identified process parameters to maximize the concentration of BC. Among the nutrients screened by Pla...

(This article belongs to the Special Issue Strategies for Optimal Fermentation by Using Modern Tools and Methods)
  • Article
  • Open Access
50 Citations
15,641 Views
12 Pages

Optimization of Growth Conditions to Enhance PHA Production by Cupriavidus necator

  • Soňa Ronďošová,
  • Barbora Legerská,
  • Daniela Chmelová,
  • Miroslav Ondrejovič and
  • Stanislav Miertuš

The accumulation of polyhydroxyalkanoates (PHAs) by microorganisms usually occurs in response to environmental stress conditions. Therefore, it is advantageous to choose two-step cultivation. The first phase is aimed at maximizing biomass production,...

(This article belongs to the Special Issue Fermentative Production of Biofuels and Bioproducts within a Biorefinery Perspective)
  • Article
  • Open Access
1 Citations
3,111 Views
12 Pages

Improvement in Natural Antioxidant Recovery from Sea Buckthorn Berries Using Predictive Model-Based Optimization

  • Seunghee Kim,
  • Jeongho Lee,
  • Hyerim Son,
  • Kang Hyun Lee and ,
  • Youngsang Chun,
  • Ja Hyun Lee,
  • Taek Lee and
  • Hah Young Yoo
  • + 3 authors+ 0 author

Sea buckthorn berries (SBB) are well known for being rich in natural bioactive compounds with high pharmacological activity. In this study, the optimization of extraction parameters was performed to recover phenolic compounds with high antioxidant ac...

(This article belongs to the Section Agricultural Product Quality and Safety)
  • Article
  • Open Access
2 Citations
2,208 Views
15 Pages

Multi-Response Optimization and Experimental Investigation of the Influences of Various Coolant Conditions on the Milling of Alloy 20

  • Youlei Zhao,
  • Na Cui,
  • Zhenxian Hou,
  • Jing Li and ,
  • Junqiang Liu and
  • Yapeng Xu
  • + 1 author+ 0 author

This study investigates the machining processes of Alloy 20 under different cooling conditions: Minimum Quantity Lubrication (MQL), Carbon Dioxide (CO2), and the hybrid MQL + CO2 approach. The research focuses on optimizing the cutting parameters, un...

  • Article
  • Open Access
1 Citations
1,248 Views
15 Pages

Design and Experiment of a Laser Scoring Device for Camellia oleifera Fruits

  • Xinhan Luo,
  • Yujia Cui,
  • Xiwen Yang,
  • Guangfa Hu and
  • Zhili Wu

To address the low shelling rate and high seed breakage in existing oil tea fruit shelling devices, a novel laser scoring device was designed for fresh Camellia oleifera fruits. Experimental studies were conducted to optimize the key parameters of th...

(This article belongs to the Section Agricultural Technology)
  • Article
  • Open Access
11 Citations
3,855 Views
18 Pages

Efficiency Optimization of an Annular-Nozzle Air Ejector under the Influence of Structural and Operating Parameters

  • Ilya A. Lysak,
  • Galina V. Lysak,
  • Vladimir Yu. Konyukhov,
  • Alena A. Stupina and ,
  • Valeriy E. Gozbenko and
  • Andrei S. Yamshchikov
  • + 1 author+ 0 author

8 July 2023

The efficiency of annular-nozzle ejectors serving as components of complex technical systems interacting with high-temperature media in engines and in the field of energy technologies is not linearly related to the gas-dynamic characteristics of the...

(This article belongs to the Section E2: Control Theory and Mechanics)
  • Article
  • Open Access
1,007 Views
16 Pages

Data-Driven Optimization of Electromagnetic–Mechanical Coupling of Permanent Magnet Topology for Vibration Suppression in PMDC Motors

  • Kai Ren,
  • Ziyang Tian,
  • Zilong Zhuang,
  • Yujing Xu and ,
  • Haiyang Sun and
  • Min Dong
  • + 1 author+ 0 author

1 April 2026

This study proposes a vibration reduction strategy for a 12-slot, two-pole permanent magnet brushed DC (PMDC) motor used in automotive blower systems. A multi-parameter optimization framework combining finite element analysis and experimental validat...

(This article belongs to the Section Electrical Machines and Drives)
  • Article
  • Open Access
57 Citations
7,045 Views
11 Pages

3 February 2020

Energy conservation and emission reduction is an essential consideration in sustainable manufacturing. However, the traditional optimization of cutting parameters mostly focuses on machining cost, surface quality, and cutting force, ignoring the infl...

  • Article
  • Open Access
2,695 Views
20 Pages

18 March 2019

In this paper, a statistical cloud model was proposed for optimal design of the proportional integral derivative (PID) controllers used in current control of vehicle-to-grid connected inverter systems with PID parameters. By collecting the effective...

  • Article
  • Open Access
6 Citations
1,770 Views
15 Pages

26 March 2024

It is important to reduce the negative environmental effects of non-road diesel engines, which are increasingly used in many facilities and machines, without loss of performance. Biodiesel is used as an alternative to fossil-based diesel fuels to eli...

(This article belongs to the Topic Advanced Engines Technologies)
  • Article
  • Open Access
15 Citations
4,632 Views
17 Pages

Electrochemical Mineralization of Ibuprofen on BDD Electrodes in an Electrochemical Flow Reactor: Numerical Optimization Approach

  • Alejandro Regalado-Méndez,
  • Martín Ruiz,
  • José A. Hernández-Servín,
  • Reyna Natividad and ,
  • Rubi Romero,
  • Mario E. Cordero,
  • Carlos Estrada-Vázquez and
  • Ever Peralta-Reyes
  • + 3 authors+ 0 author

17 December 2020

Statistical analysis was applied to optimize the electrochemical mineralization of ibuprofen with two boron-doped diamond (BDD) electrodes in a continuous electrochemical flow reactor under recirculation batch mode. A central composite rotatable (CCR...

(This article belongs to the Special Issue Control and Optimization of Wastewater Treatment Technology)
  • Article
  • Open Access
4 Citations
2,760 Views
20 Pages

A Methodological Approach to Extracting Patterns of Service Utilization from a Cross-Continuum High Dimensional Healthcare Dataset to Support Care Delivery Optimization for Patients with Complex Problems

  • Jonas Bambi,
  • Yudi Santoso,
  • Hanieh Sadri,
  • Ken Moselle and ,
  • Abraham Rudnick,
  • Stan Robertson,
  • Ernie Chang,
  • Alex Kuo,
  • Joseph Howie and
  • Ashlin Richardson
  • + 8 authors+ 3 authors

Background: Optimizing care for patients with complex problems entails the integration of clinically appropriate problem-specific clinical protocols, and the optimization of service-system-encompassing clinical pathways. However, alignment of service...

(This article belongs to the Special Issue Feature Papers in Clinical Informatics Section)
  • Article
  • Open Access
21 Citations
2,613 Views
19 Pages

7 December 2023

To achieve durable high-performance fiber-reinforced concrete that meets economic requirements, this paper introduces a hybrid intelligent framework based on the Latin hypercube experimental design, response surface methodology (RSM), and the NSGA-II...

(This article belongs to the Special Issue Recent Progress in Sustainability and Durability of Concrete and Mortar Composites)
  • Article
  • Open Access
24 Citations
3,246 Views
15 Pages

14 October 2022

Forced chicory roots (FCR) are the main but also the least valued by-products of Belgian endive culture. However, they contain molecules of interest for industry such as caffeoylquinic acids (CQAs). This study aims to investigate accelerated solvent...

(This article belongs to the Special Issue Use of Emerging Technologies for Improving the Extraction of Valuable Compounds from Foods, Food Wastes, and Microalgal Biomass)
  • Article
  • Open Access
6 Citations
2,245 Views
20 Pages

20 April 2023

Process optimization is increasingly finding applications in chemical engineering. The reason for this increase in applications is to create more efficient and sustainable technological processes. Thanks to innovative models, it is possible to plan a...

(This article belongs to the Section Catalytic Reaction Engineering)

of 407