The gas sweetening process is essential for removing harmful acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2), from natural gas before delivery to end-users. Consequently, chemical absorption-based acid gas removal units (AGRUs) ar...
Hyaluronic acid (HA) is one of the most important ophthalmic biomaterials, while also being used for tissue engineering and drug delivery. Although chemical cross-linking is an effective way to improve the material performance, it may as a consequenc...
This work investigates the effect of different solvent systems on solubility, thermodynamics, metastable zone width (MSZW), and crystal habit of ascorbic acid, in order to help optimize its crystallization process. The solubility curves and metastabl...
In this study, we investigated how co-solvent and polymer combinations affect the performance of dye-sensitized solar cells (DSSCs) using TiO2- and ZnO-modified carbon nanotube (CNT) composite papers as photoelectrodes. Co-solvents such as N,N-dimeth...
The main objective of the current work was to evaluate the suitability of ultrasound-assisted extraction (UAE) for the recovery of oil from papaya seed as compared to conventional extraction techniques (i.e., Soxhlet extraction (SXE) and solvent extr...
Lignin, the second most abundant natural polymer, is a by-product of the biorefinery and pulp and paper industries. This study was undertaken to evaluate the properties and estimate the prospects of using lignin as a by-product of the pretreatment of...
Since 2007, heterogeneous, high-viscosity active bituminous formations have often occurred during the drilling process in Yadavaran oilfield (Iran), Halfaya oilfield (Iraq), and tar sands (Canada). The formation of bitumen exhibits plastic and creep...
Organic solvent nanofiltration (OSN) has been recognized as an eco-friendly separation system owing to its excellent cost and energy saving efficiency, easy scale-up in the narrow area and mild operation conditions. Membrane properties are the key pa...
Recently, graphene-polymer composites gained a central role in advanced stress and strain sensing. A fundamental step in the production of epoxy-composites filled with graphene nanoplatelets (GNPs) consists in the exfoliation and dispersion of expand...
The following article debates on the properties of cellulose-filled ethylene-norbornene copolymer (EN) composites. Natural fibers employed in this study have been modified via two different approaches: solvent-involving (S) and newly developed non-so...
Degradable polymers, such as poly(L-lactide) (PLLA), are widely investigated for biomedical applications, including drug delivery systems and temporary implants. Their functionality can be expanded by incorporating degradable metal microparticles tha...
To explore the application of forward osmosis (FO) technology in the organic solvent recovery field, we prepared a new solvent-resistant triple layer thin film composite (TFC) membrane on the PI (polyimide) substrate. The deep eutectic supramolecular...
In order to solve the problems of high volatility and insufficient absorption effect when using chemical by-product washing oil to treat benzene-containing waste gas, this study innovatively proposed a composite solvent screening method based on the...
This review provides a systematic analysis of the literature data on the electrodeposition of composite coatings using plating baths based on a new generation of room-temperature ionic liquids known as deep eutectic solvents (DESs). Such systems offe...
In this study, multilayer graphene oxide (GO) was used to prepare the functional layer of polyimide/GO composite membrane with polyimide (P84) used as the supporting layer. Chitosan added in the functional layer was utilized to adjust the selectivity...
The advancement of wearable sensing technologies has been pivotal in revolutionizing healthcare, environmental monitoring, and personal fitness. Among the diverse materials employed in these technologies, multifunctional hydrogel composites have emer...
Deep eutectic solvents (DESs)—a promising class of alternatives to conventional ionic liquids (ILs) that have freezing points lower than the individual components—are typically formed from two or more components through hydrogen bond inte...
This investigation evaluated the effects of aprotic solvents, i.e., tetrahydrofuran, pyridine, and morpholine, compared with hydrogen peroxide, on the surfaces of fiber-reinforced composite posts with a composite core based on the microtensile bond s...
This study was conducted to investigate the chemical and nutritional composition of Artemisia annua leaves in addition to determination of antioxidant potential of their extracts prepared in different solvents. Chemical composition was determined by...
Compared to the traditional chemical-crosslinking-based polymer, the porous polytetrafluoroethylene (PTFE) substrate is considered to be an excellent support for the fabrication of thin-film composite (TFC) organic solvent nanofiltration (OSN) membra...
To develop an improved crystallization process for meropenem trihydrate, an important carbapenem antibiotic, the pH-dependent solubility of meropenem trihydrate in different solvent systems was investigated using the laser monitoring dynamic method....
In the present work, solvent casting and Pickering emulsion methods are studied to enhance the mechanical properties of polylactic acid (PLA) composites containing surface-modified cellulose nanomaterials. To enhance the compatibility and the adhesio...
Exfoliation of two-dimensional boron nitride nanosheets (BNNSs) from parent bulk material has been receiving intensive attention because of its fascinating physical properties. Liquid exfoliation is a simple, scalable approach to produce single-layer...
To prepare a soft magnetic powder core, the magnetic powder surface has to be insulated by phosphating treatment. Organic chemicals such as ethanol and acetone are generally used as solvents for phosphoric acid, which may cause serious environmental...
The type of organic solvents used in interfacial polymerization affects the surface property, free volume, and separation performance of the thin-film composite (TFC) polyamide membrane. In this study, TFC polyamide membrane was fabricated through in...
MXene, a layered nanocarbon material, exhibits excellent conductivity and solubility. Its high sensitivity also makes it useful for soft pressure sensors. However, the compatibility between sensitivity and fast responses in resistance-change sensors...
Ball-milling is usually used to prepare co-amorphous drug–amino acid (AA) mixtures. In this study, co-amorphous drug–AA mixtures were produced using spray-drying, a scalable industrially preferred preparation method. The influence of the solvent type...
Innovative and sustainable all-cellulose composites (ACCs) can be obtained by partial dissolution of cellulosic fibers and regeneration of the dissolved fraction. Among cellulose solvents, sodium hydroxide/urea solutions are recognized as promising l...
Various organic compounds susceptible to anodic polymerization were selected to study the effects of two solvents: acetic acid and ethyl acetate. Phenol and most of its derivatives, as well as resorcinol and 3,5-dihydroxybenzoic acid, exhibited typic...
The present work describes, for the first time, the electrodeposition of NiSn alloy/reduced graphene oxide composite coatings (NiSn-rGO) obtained under pulse current electrodeposition conditions from deep eutectic solvents (choline chloride: ethylene...
Some experimental results regarding the direct electrodeposition of tin-reduced graphene oxide composite (Sn-rGO) compared to the electrodeposition of tin metal (Sn) from a deep eutectic solvent (DES), namely using choline chloride-ethylene glycol eu...
The need to develop new electrochemical energy storage and conversion devices requires the creation of new, available, low-cost and high-performance electrocatalytic materials, which can be produced as coatings by electrodeposition technique. The ele...
This study investigates the synthesis and evaluation of ZnO/g-C3N4 composites as efficient green catalysts for advanced oxidation processes (AOPs) targeting the treatment of contaminated water. The composites were synthesized using a ternary deep eut...
Gemmotherapy, a natural therapy based on bud macerates, has recently gained importance in the field of food supplements. However, two coexisting extraction methods employ a glycerin-based solvent, either in a binary or ternary solvent mixture. The ab...
This study investigates the structural and transport properties of SDS, CTAB, and SB3-12 micelles in three deep eutectic solvents (DESs), Ethaline, Glyceline, and Reline, using molecular dynamics (MD) simulations. The influence of solvent composition...
Easily soluble organic components in Santanghu long flame coal (SLFC) from Hami (Xinjiang, China) were separated by CS2 and acetone mixed solvent (v/v = 1:1) under ultrasonic condition, and the extract residue was stratified by carbon tetrachloride t...
As an environment-friendly biodegradable material, poly (vinyl alcohol) (PVA) has been focused on improving performance and expanding its applications. In this study, improved performance lignin nanoparticle/PVA composite film was prepared by phenola...
A number of coating techniques have been used to improve the processability of high explosives. These techniques are typically used for developing compositions, such as boosters and fillers. The most typically used technique is the “solvent&nda...
Brown algae are ubiquitously distributed in the NW coastline of the Iberian Peninsula, where they stand as an underexploited resource. In this study, five solvents were applied to the extraction of pigments from nine brown algae, followed by their de...
Bone tissue engineering has been developed in the past decades, with the engineering of bone substitutes on the vanguard of this regenerative approach. Polycaprolactone-based scaffolds are fairly applied for bone regeneration, and several composites...
Chaperonin GroEL is a complex oligomeric heat shock protein (Hsp60) assisting the correct folding and assembly of other proteins in the cell. An intriguing question is how GroEL folds itself. According to the literature, GroEL reassembly is dependent...
Solvent composition is an important synthesis parameter that can influence the microstructure and electrochemical performance of electrode materials. In this study, the effect of solvent composition on the structural, morphological, textural, and ele...
Lipidomics aim to quantify lipid species in all kinds of samples, including tissues. To subject a fixed amount of sample to various workflows, tissue homogenates were frequently prepared at defined concentrations in water or by addition of organic so...
Macadamia husk, a major by-product of the macadamia industry, represents an underutilised source of phenolic compounds with significant potential for value-added applications. This study aimed to investigate the effects of extraction methods (convent...
The UV/Vis absorption energies (νmax) of different solvatochromic probes measured in co-solvent/water mixtures are re-analyzed as a function of the average molar concentration (Nav) of the solvent composition compared to the use of the mole fracti...
Extraction solvent is a very important factor in the recovery of antioxidants from natural matrices. In this study, the effect of three solvents (ethanol, ethanol/water and water) on the phenolic composition, antioxidant and anti-cholinesterase activ...
Samples of unifloral sulla (Hedysarum coronarum L.) honey from Sardinia (Italy) were analysed. To investigate the chemical composition of the honey volatiles two solvent systems were used for ultrasonic solvent extraction (USE): 1) a 1:2 (v/v) pentan...
Poly(lactic acid) (PLA) is a renewable and biodegradable polymer that has attracted considerable attention for sustainable packaging applications. However, its inherent brittleness limits its use in flexible films. In this study, PLA/poly(vinyl alcoh...
In this study, the effect of the polyvinyl alcohol (PVA) binder solvent composition on the electrical properties of sintered 0.98BaTiO3-0.02(Ba0.5Ca0.5)SiO3 ceramics doped with x wt.% Dy2O3 (0.0 ≤ x ≤ 0.3) was investigated. In the absence of the PVA...
The determination of the NMR spin–spin relaxation rate of water in (purely) aqueous particulate dispersions has been shown to be a convenient and facile experimental approach to probing the composition of near particle surface structures. Here,...
of 77