Skip to Content

3,887 Results Found

  • Article
  • Open Access
7 Citations
2,974 Views
12 Pages

Optimization of QuEChERS Extraction for Determination of Carotenoids, Polyphenols, and Sterols in Orange Juice Using Design of Experiments and Response Surface Methodology

  • Yusuke Iwasaki,
  • Saki Yamada,
  • Shinya Sakuma,
  • Shunpei Kanba and ,
  • Chinatsu Youda,
  • Mizuki Ono,
  • Rie Ito,
  • Junzo Kamei and
  • Hiroshi Akiyama
  • + 4 authors+ 0 author

15 August 2023

Several compounds with different physical properties are present in foods, biological components, and environmental samples, and there are cases in which these must be analyzed simultaneously. However, it is difficult to extract compounds with differ...

(This article belongs to the Special Issue Recent Advances in Extraction, Characterization and Biotechnological Use of Food Phytochemicals)
  • Article
  • Open Access
22 Citations
3,537 Views
17 Pages

4 November 2022

Today, among emerging materials, metal matrix composites, due to their excellent properties, have an increasing demand in the field of aerospace and automotive industries. However, the difficulties associated with the processing of these composites h...

(This article belongs to the Special Issue Advanced Polymeric Composites and Hybrid Materials)
  • Article
  • Open Access
4 Citations
2,861 Views
16 Pages

Trichosporon oleaginosus is an unconventional oleaginous yeast distinguished by its remarkable capacity to accumulate lipids in excess of 70% of its dry weight, particularly when cultivated in nitrogen-restricted conditions with ample carbon sources....

(This article belongs to the Section Biochemical Engineering)
  • Article
  • Open Access
1,151 Views
21 Pages

The Chang’e project has completed a sampling mission of the shallow lunar soil layer; however, the exploration of the deep lunar rock layer remains unaddressed. To further investigate the feasibility of deep lunar rock drilling and identify the...

(This article belongs to the Section Astronautics & Space Science)
  • Article
  • Open Access
3 Citations
3,333 Views
22 Pages

2 February 2024

The aeroelastic response of lightweight low-speed aircrafts with slender wings under extreme flow turbulence intensity is not well understood. Experiments on a commercial unmanned aerial vehicle (UAV) with a 3 m wingspan and aspect ratio of 13.6 were...

(This article belongs to the Special Issue Aeroelasticity, Volume IV)
  • Case Report
  • Open Access
2 Citations
3,447 Views
15 Pages

8 October 2020

Experimental results pertaining to natural pharmaceutical complex products (NPCPs) often exhibit large variabilities in their associated response variables. To improve the quality of an NPCP, systemic studies (i.e., statistical analysis and mathemati...

(This article belongs to the Section Applied Industrial Technologies)
  • Article
  • Open Access
11 Citations
8,309 Views
23 Pages

Optimization of Capacitive Acoustic Resonant Sensor Using Numerical Simulation and Design of Experiment

  • Rubaiyet Iftekharul Haque,
  • Christophe Loussert,
  • Michelle Sergent,
  • Patrick Benaben and
  • Xavier Boddaert

16 April 2015

Optimization of the acoustic resonant sensor requires a clear understanding of how the output responses of the sensor are affected by the variation of different factors. During this work, output responses of a capacitive acoustic transducer, such as...

(This article belongs to the Special Issue Acoustic Waveguide Sensors)
  • Article
  • Open Access
11 Citations
6,298 Views
13 Pages

Experimental Investigation of Thermal Fatigue Die Casting Dies by Using Response Surface Modelling

  • Hassan Abdulrssoul Abdulhadi,
  • Syarifah Nur Aqida Syed Ahmad,
  • Izwan Ismail,
  • Mahadzir Ishak and
  • Ghusoon Ridha Mohammed

26 May 2017

Mechanical and thermal sequences impact largely on thermo-mechanical fatigue of dies in a die casting operations. Innovative techniques to optimize the thermo-mechanical conditions of samples are major focus of researchers. This study investigates th...

(This article belongs to the Special Issue Fatigue Damage)
  • Article
  • Open Access
46 Citations
6,609 Views
14 Pages

8 December 2023

Response surface methodology (RSM) is one of the most effective design of experiments (DoE) methods for analyzing and optimizing experiments with limited data. However, the performance of RSM is highly dependent on the quality of the experimental dat...

  • Article
  • Open Access
23 Citations
4,250 Views
13 Pages

This paper investigates the optimization of 3D printing by 1.75 mm filaments of poly-lactic acid (PLA) materials. The samples are printed separately and glued together to join the tensile device for the failure load and checking the surface roughness...

(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2023)
  • Article
  • Open Access
15 Citations
2,804 Views
16 Pages

Multiobjective Collaborative Optimization of Argon Bottom Blowing in a Ladle Furnace Using Response Surface Methodology

  • Zicheng Xin,
  • Jiankun Sun,
  • Jiangshan Zhang,
  • Bingchang He and ,
  • Junguo Zhang and
  • Qing Liu
  • + 1 author+ 0 author

26 July 2022

In order to consider both the refining efficiency of the ladle furnace (LF) and the quality of molten steel, the water model experiment is carried out. In this study, the single factor analysis, central composite design principle, response surface me...

(This article belongs to the Special Issue Engineering Calculation and Data Modeling)
  • Article
  • Open Access
62 Citations
7,706 Views
29 Pages

Modeling and Optimization Approaches of Laser-Based Powder-Bed Fusion Process for Ti-6Al-4V Alloy

  • Behzad Fotovvati,
  • Madhusudhanan Balasubramanian and
  • Ebrahim Asadi

18 November 2020

Laser-based powder-bed fusion (L-PBF) is a widely used additive manufacturing technology that contains several variables (processing parameters), which makes it challenging to correlate them with the desired properties (responses) when optimizing the...

  • Article
  • Open Access
6 Citations
4,956 Views
14 Pages

Eliminating Luck and Chance in the Reactivation Process: A Systematic and Quantitative Study of the Thermal Reactivation of Activated Carbons

  • Karthik Rathinam,
  • Volker Mauer,
  • Christian Bläker,
  • Christoph Pasel and ,
  • Lucas Landwehrkamp,
  • Dieter Bathen and
  • Stefan Panglisch
  • + 2 authors+ 0 author

2 December 2023

Increasing environmental concerns, stricter legal requirements, and a wide range of industrial applications have led to growing demand for activated carbon worldwide. The energy-intensive production of fresh activated carbon causes significant CO2 em...

  • Article
  • Open Access
2 Citations
2,123 Views
15 Pages

Study on Optimal Production Conditions of Fibrinolytic Kinase Derived from the Nereid Worm, Perinereis aibuhitensis Grub

  • Tuo Song,
  • Jun Cheng,
  • Xiaozhen Diao,
  • Yang Man and ,
  • Boyu Chen,
  • Haixing Zhang,
  • Jeevithan Elango and
  • Wenhui Wu
  • + 3 authors+ 0 author

The fibrinolytic kinase identified in the nereid worm (Perinereis aibuhitensis Grub) displays exceptional kinase activity, stability, and specificity, suggesting its potential as a promising candidate for the advancement of new thrombolytic drugs. In...

(This article belongs to the Section Industrial Fermentation)
  • Article
  • Open Access
7 Citations
4,653 Views
18 Pages

Interpolation of Turbulent Boundary Layer Profiles Measured in Flight Using Response Surface Methodology

  • Hidemi Takahashi,
  • Mitsuru Kurita,
  • Hidetoshi Iijima and
  • Monami Sasamori

21 November 2018

Turbulent boundary layer profiles on the aircraft surface were characterized by pitot-rake measurements conducted in flight experiments at high subsonic Mach number ranges. Due to slight variations in atmospheric air conditions or aircraft attitudes,...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
14 Citations
3,997 Views
14 Pages

Experiment and Research on Cutting Mechanical Properties of Little Cabbage

  • Wei Wang,
  • Shilin Wang,
  • Jinqi Zhang,
  • Xiaolan Lv and
  • Zhongyi Yi

16 February 2022

To reduce the cutting force and cutting power consumption during harvest, the cutting mechanical properties of the root of little cabbage were studied. The cutting experiment was carried out using a texture analyzer, and the influence of the individu...

(This article belongs to the Section Agricultural Science and Technology)
  • Article
  • Open Access
4 Citations
2,759 Views
11 Pages

Mechanical Behaviour of Stamped Aluminium Alloy Components by Means of Response Surfaces

  • Isidoro Iván Cuesta,
  • Pavel Michel Almaguer-Zaldivar and
  • Jesús Manuel Alegre

6 June 2019

In the automotive industry, the use of stamped aluminium alloy components has become a very common occurrence. For the appropriate design of these components, it is necessary to know how the manufacturing process affects the material properties. In t...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
6 Citations
2,801 Views
13 Pages

Removal of Zearalenone from Degummed Corn Oil by Hydrolase on a Batch-Refining Unit

  • Chenwei Zhao,
  • Pengkai Xie,
  • Jun Jin,
  • Qingzhe Jin and
  • Xingguo Wang

24 November 2022

The removal of zearalenone (ZEN) from degummed corn oil (DCO) using hydrolase on a batch-refining unit was studied. According to single-factor and response surface experiments, the optimum technological conditions for reaching the maximum degradation...

(This article belongs to the Section Food Quality and Safety)
  • Article
  • Open Access
23 Citations
4,463 Views
26 Pages

8 February 2021

The single-point incremental forming process (SPIF) is one of the emerging manufacturing methods because of its flexibility in producing the desired complex shapes with higher formability at low-cost compared to traditional sheet forming methods. In...

(This article belongs to the Special Issue Recent Advances in Metal Forming Technology)
  • Article
  • Open Access
2 Citations
928 Views
22 Pages

Enhancing Wind Energy Utilization Efficiency by Optimizing a Darrieus Vertical Axis Wind Turbine with Auxiliary Blades Aerodynamic Based on DOE-RSM

  • You Wu,
  • Yi Yang,
  • Binbin Zhang,
  • Dequan Zhou and ,
  • Changming Ling and
  • Yunting Ge
  • + 1 author+ 0 author

3 March 2026

As a critical component of sustainable energy systems, enhancing the efficiency of Vertical Axis Wind Turbine (VAWT) is paramount. This study addresses the key Challenges of poor startup performance and low power output in VAWTs by investigating the...

(This article belongs to the Section Energy Sustainability)
  • Article
  • Open Access
3 Citations
2,489 Views
14 Pages

Multi-Parameter Optimization of Stator Coreless Disc Motor Based on Orthogonal Response Surface Method

  • Huiqin Sun,
  • Ying Li,
  • Lucheng Zhang,
  • Zezhao Xue and ,
  • Weiguang Hu,
  • Guoshuai Li and
  • Yingjun Guo
  • + 2 authors+ 0 author

In response to the structural optimization problem of PCB stator coreless disc motors, the orthogonal response surface method was used to optimize the motor structure, preliminarily determine the basic parameters of the motor, and conduct orthogonal...

  • Article
  • Open Access
7 Citations
3,657 Views
19 Pages

Optimization of Fermentation Process for New Anti-Inflammatory Glycosylceramide Metabolite from Aspergillus sp.

  • Yung-Husan Chen,
  • Qiaoqiao Zhu,
  • Jingyi Li,
  • Rong Yang and ,
  • Jingwen Zhang,
  • Minxin You,
  • Lianzhong Luo and
  • Bingye Yang
  • + 3 authors+ 0 author

31 January 2024

A novel ceramide compound, named Aspercerebroside A (AcA), was successfully isolated from the ethyl acetate layer of the marine symbiotic fungus Aspergillus sp. AcA exhibited notable anti-inflammatory activity by effectively inhibiting the production...

(This article belongs to the Topic Bioactive Compounds and Therapeutics: Molecular Aspects, Metabolic Profiles, and Omics Studies)
  • Article
  • Open Access
7 Citations
1,948 Views
15 Pages

Establishment and Parameter Calibration of a Simulation Model of Coated Cotton Seeds and Soil

  • Fandi Zeng,
  • Hongwei Diao,
  • Ji Cui,
  • Wenlong Ye and ,
  • Hongbin Bai and
  • Xuying Li
  • + 1 author+ 0 author

5 March 2024

Precision seeding technology is an important component of agricultural mechanization production. The precise regulation of seed movement behavior is the core of precision sowing technology and the key to improving the quality of single seed precision...

(This article belongs to the Section AI-Enabled Process Engineering)
  • Article
  • Open Access
2 Citations
3,721 Views
14 Pages

29 August 2022

In this study, experiments, simulations, and optimization were performed to evaluate heat transfer performance of ferrofluids. Ferrofluids are colloidal suspensions containing magnetic-nano particles with a diameter of 5 to 15 nm in a base fluid such...

(This article belongs to the Section Nanotechnology and Applied Nanosciences)
  • Article
  • Open Access
8 Citations
6,430 Views
17 Pages

Polydimethylsiloxane (PDMS) Membrane for Separation of Soluble Toluene by Pervaporation Process

  • Salam H. Rasheed,
  • Salah S. Ibrahim,
  • Qusay F. Alsalhy and
  • Hasan Sh. Majdi

28 February 2023

A commercial polydimethylsiloxane (PDMS) membrane was employed to separate the soluble toluene compounds (C7H8) from an aqueous solution via the pervaporation (PV) process. The performance and the efficacy of the PDMS PV membrane were evaluated throu...

(This article belongs to the Special Issue Membrane Science towards Sustainable Development Goals (SDGs))
  • Article
  • Open Access
6 Citations
2,740 Views
21 Pages

7 August 2023

In this paper, the results obtained from a series of parametric analyses, where the influence that geometric and mechanical parameters have in the structural response of existing vernacular cob walls within an Irish context, are presented. A design o...

(This article belongs to the Section Civil Engineering)
  • Feature Paper
  • Article
  • Open Access
3 Citations
4,624 Views
19 Pages

20 July 2021

A common form of damage encountered in marine structures is the accumulation of corrosion in susceptible areas, which leads to material wastage. As a result, the structural strength of the members affected is compromised, endangering their safe opera...

(This article belongs to the Collection Fracture, Fatigue, and Wear)
  • Article
  • Open Access
999 Views
20 Pages

29 September 2025

Sediment buildup in storage tanks over extended operation periods may compromise their efficiency. To prevent pollutant deposition in storage tanks and enhance their hydraulic self-cleaning efficiency, this study addressed the unique structural confi...

  • Article
  • Open Access
91 Views
19 Pages

12 November 2026

Coal fly ash-derived cenospheres represent a secondary aluminosilicate resource that can be converted into zeolitic materials for metal removal from water. In this study, acid-pretreated and NaOH-activated cenospheres were crystallized by conventiona...

  • Article
  • Open Access
3 Citations
2,115 Views
15 Pages

2 April 2023

In machining 508III steel, the cemented carbide tool is subjected to a strong periodic thermal load impact, leading to serious tool-chip adhesion and shortening the tool life. Considering the influence of cutting parameters on temperature, temperatur...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
11 Citations
5,765 Views
19 Pages

28 January 2025

This study optimizes the structural design of a composite wing shell by minimizing mass and maximizing the first natural frequency. The analysis focuses on the effects of polyvinyl chloride (PVC) foam thickness and the fiber orientation angle of the...

(This article belongs to the Section Drone Design and Development)
  • Article
  • Open Access
8 Citations
3,041 Views
18 Pages

Grape pomace is the main by-product obtained from wine production that is still enriched in bioactive compounds. Within a framework of waste/by-product reuse through a sustainable approach, various green methods were utilized in this work to recover...

(This article belongs to the Special Issue Innovation in Green Extraction and Processing—a Themed Issue in Memory of Professor Farid Chemat for His Outstanding Contributions to Green Chemistry (1968–2023))
  • Article
  • Open Access
12 Citations
5,654 Views
17 Pages

5 July 2020

Under conditions where a product is subjected to extreme mechanical loading over a very short time period, the strain rate has considerable influence on the behaviour of the product’s material. To simulate the behaviour of the material accurate...

(This article belongs to the Special Issue Evolutionary Computation and Mathematical Programming 2020)
  • Article
  • Open Access
10 Citations
7,768 Views
13 Pages

17 September 2021

Despite the great potential of design of experiments (DoE) for efficiency and plannability in academic research, it remains a method predominantly used in industrial processes. From our perspective though, DoE additionally provides greater informatio...

(This article belongs to the Section Innovation of Polymer Science and Technology)
  • Article
  • Open Access
670 Views
15 Pages

Chemometric Optimization of UHPLC Separation of Multiclass Pesticides of Environmental Interest

  • Fabrizio Ruggieri,
  • Francesca Commito,
  • Maria Anna Maggi,
  • Mariagiovanna Accili and ,
  • Martina Foschi and
  • Alessandra Biancolillo
  • + 1 author+ 0 author

26 March 2026

Pesticides constitute a critical class of anthropogenic contaminants whose pervasive occurrence in surface waters, groundwater, and drinking water distribution systems poses substantial ecological and public health risks. Their pronounced structural...

(This article belongs to the Special Issue New Technologies for Water Quality: Treatment and Monitoring)
  • Article
  • Open Access
14 Citations
5,074 Views
10 Pages

Multiple Performance Optimization for Microstrip Patch Antenna Improvement

  • Ja-Hao Chen,
  • Chen-Yang Cheng,
  • Chuan-Min Chien,
  • Chumpol Yuangyai and ,
  • Ting-Hua Chen and
  • Shuo-Tsung Chen
  • + 1 author+ 0 author

26 April 2023

As the Internet of Things (IOT) becomes more widely used in our everyday lives, an increasing number of wireless communication devices are required, meaning that an increasing number of signals are transmitted and received through antennas. Thus, the...

(This article belongs to the Special Issue Digital Signal Processing for Modern Technology)
  • Article
  • Open Access
1 Citations
1,849 Views
14 Pages

24 September 2025

The inevitable ubiquity of natural organic matter (NOM) in all waters presents a challenge to the proper functioning of water treatment processes. Therefore, minimizing NOM in raw water is crucial to avoid operational issues in subsequent treatment s...

(This article belongs to the Special Issue Eco-Friendly Innovations for Water Purification: Advanced Oxidation and Sustainable Cleanup Solutions)
  • Article
  • Open Access
19 Citations
3,120 Views
24 Pages

In the last few decades, natural composite materials have been considered one of the highly sustainable ecological alternatives for reducing the consumption of synthetic materials. Today, research on natural fiber composites is the main thrust for th...

(This article belongs to the Special Issue Advanced Polymeric Composites and Hybrid Materials)
  • Article
  • Open Access
24 Citations
6,792 Views
25 Pages

A New Empirical Model for Viscosity of Sulfonated Polyacrylamide Polymers

  • Saeed Akbari,
  • Syed Mohammad Mahmood,
  • Hosein Ghaedi and
  • Sameer Al-Hajri

14 June 2019

Copolymers of acrylamide with the sodium salt of 2-acrylamido-2-methylpropane sulfonic acid—known as sulfonated polyacrylamide polymers—had been shown to produce very promising results in the enhancement of oil recovery, particularly in p...

  • Article
  • Open Access
14 Citations
4,644 Views
19 Pages

Finite Element Analysis and Statistical Optimization of End-Burr in Turning AA2024

  • Muhammad Asad,
  • Hassan Ijaz,
  • Waqas Saleem,
  • Abdullah S.B. Mahfouz and ,
  • Zeshan Ahmad and
  • Tarek Mabrouki
  • + 1 author+ 0 author

28 February 2019

This contribution presents three-dimensional turning operation simulations exploiting the capabilities of finite element (FE) based software Abaqus/Explicit. Coupled temperature-displacement simulations for orthogonal cutting on an aerospace grade al...

  • Article
  • Open Access
11 Citations
7,573 Views
17 Pages

Development and Optimization of a Topical Formulation with Castanea sativa Shells Extract Based on the Concept “Quality by Design”

  • Nágilla Oliveira,
  • Maria de la Luz Cádiz-Gurrea,
  • Ana Margarida Silva,
  • Catarina Macedo and ,
  • Francisca Rodrigues and
  • Paulo Costa
  • + 1 author+ 0 author

23 December 2021

The proposed study aims to develop and optimize a topical formulation with Castanea sativa shells extract considering the concept of Quality by Design, focusing on a planned development that consider the vulnerabilities of the entire process through...

(This article belongs to the Section Sustainable Food)
  • Review
  • Open Access
666 Views
27 Pages

Design of Experiments in Corrosion Research on Duplex Stainless Steels: A Systematic and Bibliometric Review

  • Kelly Cristine Franco de Azevedo,
  • Fernando Augusto Silva Marins,
  • Messias Borges Silva and
  • Gláucio Soares da Fonseca

23 July 2026

The corrosion behavior of duplex, superduplex, and hyperduplex stainless steels is influenced by complex interactions among compositional, microstructural, processing, and environmental variables. In this context, Design of Experiments (DOE) has been...

(This article belongs to the Special Issue Microstructural Evolution, Corrosion, and Performance of Metallic Materials)
  • Article
  • Open Access
1 Citations
445 Views
22 Pages

Design and Experiment of a Sunflower Hole Fertilization Planter

  • Huimin Fang,
  • Jialu Lu,
  • Jingyi Wang,
  • Ruofu Zhao and ,
  • Tao Sheng and
  • Qingyi Zhang
  • + 1 author+ 0 author

In response to the problems of low fertilizer utilization efficiency and increased environmental risks caused by the widespread adoption of band fertilization during sunflower cultivation, a sunflower hole fertilization planter was designed according...

(This article belongs to the Section Agricultural Technology)
  • Article
  • Open Access
12 Citations
2,482 Views
19 Pages

Mathematical and Statistical Analysis of Fused Filament Fabrication Parameters for Thermoplastic Polyurethane Parts via Response Surface Methodology

  • Wajdi Rajhi,
  • Ali B. M. Ali,
  • Dheyaa J. Jasim,
  • Omid Mehrabi and ,
  • Lotfi Ben Said and
  • Mahmoud Moradi
  • + 1 author+ 0 author

8 October 2024

This work aims to analyze the effects of the main process parameters of fused filament fabrication (FFF) on the mechanical properties and part weight of 3D-printed thermoplastic polyurethane (TPU). Raster angle (RA), infill percentage (IP), and extru...

(This article belongs to the Special Issue Mathematical Applications in Industrial Engineering)
  • Article
  • Open Access
5 Citations
3,499 Views
14 Pages

22 December 2022

At present, the qualified rate of large thin-walled magnesium alloy castings is low. In this study, the effects of mold structure and process parameters were investigated to improve the production qualification rate of castings. The filling process o...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Proceeding Paper
  • Open Access
1 Citations
1,918 Views
8 Pages

26 October 2023

With the rapidly progressing world in the field of manufacturing, non-conventional machining still requires numerous advances. The requirement of machining a material with a Brinell hardness greater than 200 BHN with utmost precision and intricate ge...

(This article belongs to the Proceedings of The 4th International Electronic Conference on Applied Sciences)
  • Article
  • Open Access
8 Citations
2,604 Views
15 Pages

Photocatalytic Degradation of Neonicotinoid Insecticides over Perlite-Supported TiO2

  • Vanja Kosar,
  • Ana-Marija Križanac,
  • Ivana Elizabeta Zelić,
  • Stanislav Kurajica and
  • Vesna Tomašić

29 August 2023

The aim of this study was to investigate the photocatalytic degradation of the neonicotinoid insecticide acetamiprid in aqueous solution. Experiments were carried out in a 250 mL batch reactor with recirculation of the reaction mixture and using a UV...

(This article belongs to the Section Catalysis Enhanced Processes)
  • Article
  • Open Access
1 Citations
1,638 Views
33 Pages

4 November 2025

The present paper aims to develop a systematic, prescriptive, and exclusively statistical problem-solving methodology that integrates scientific experimental design methods with the Six Sigma philosophy. This methodology was used for the study and co...

(This article belongs to the Section Process Control, Modeling and Optimization)
  • Article
  • Open Access
76 Citations
8,176 Views
17 Pages

Design of Experiment on Concrete Mechanical Properties Prediction: A Critical Review

  • Beng Wei Chong,
  • Rokiah Othman,
  • Ramadhansyah Putra Jaya,
  • Mohd Rosli Mohd Hasan and ,
  • Andrei Victor Sandu,
  • Marcin Nabiałek,
  • Bartłomiej Jeż,
  • Paweł Pietrusiewicz,
  • Dariusz Kwiatkowski and
  • Mohd Mustafa Al Bakri Abdullah
  • + 6 authors+ 1 author

9 April 2021

Concrete mix design and the determination of concrete performance are not merely engineering studies, but also mathematical and statistical endeavors. The study of concrete mechanical properties involves a myriad of factors, including, but not limite...

(This article belongs to the Special Issue Properties of Amorphous Materials and Nanomaterials)
  • Article
  • Open Access
9 Citations
10,874 Views
12 Pages

9 July 2010

This paper presents an optimum design of a lightweight vehicle levitation electromagnet, which also provides a passive guide force in a magnetic levitation system for contactless delivery applications. The split alignment of C-shaped electromagnets a...

(This article belongs to the Special Issue Selected Papers from the 14th International Symposium on Electromagnetic Fields-ISEF2009)

of 78