Skip to Content
You are currently on the new version of our website. Access the old version .
MaterialsMaterials
  • Article
  • Open Access

2 April 2023

15 Pages

Temperature Experiment and Parameter Optimization of Cemented Carbide Tool in Milling 508III Steel

,
,
,
and
School of Mechanical Engineering, Harbin University of Science and Technology, Harbin 150080, China
*
Author to whom correspondence should be addressed.
This article belongs to the Section Manufacturing Processes and Systems

Abstract

In machining 508III steel, the cemented carbide tool is subjected to a strong periodic thermal load impact, leading to serious tool-chip adhesion and shortening the tool life. Considering the influence of cutting parameters on temperature, temperature experiments and finite element (FE) simulations were carried out based on Box-Behnken experimental design criteria in the response surface method (RSM). Based on the experimental results, A second-order polynomial regression prediction model for temperature was constructed as the optimization objective function based on RSM. A temperature prediction model based on GA-SVM was established to predict temperature change. Taking cutting temperature and efficiency as evaluation indicators, the elitist nondominated sorting genetic algorithm was used to optimize cutting parameters. These findings may be important for the tool life improvement and reasonable parameter selection.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.