Skip to Content
You are currently on the new version of our website. Access the old version .
MathematicsMathematics
  • Article
  • Open Access

26 July 2022

16 Pages

Multiobjective Collaborative Optimization of Argon Bottom Blowing in a Ladle Furnace Using Response Surface Methodology

,
,
,
,
and
1
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China
2
Tangshan Branch, Hebei Iron and Steel Co., Ltd., Tangshan 063000, China
*
Authors to whom correspondence should be addressed.
This article belongs to the Special Issue Engineering Calculation and Data Modeling

Abstract

In order to consider both the refining efficiency of the ladle furnace (LF) and the quality of molten steel, the water model experiment is carried out. In this study, the single factor analysis, central composite design principle, response surface methodology, visual analysis of response surface, and multiobjective optimization are used to obtain the optimal arrangement scheme of argon blowing of LF, design the experimental scheme, establish the prediction models of mixing time (MT) and slag eye area (SEA), analyze the comprehensive effects of different factors on MT and SEA, and obtain the optimal process parameters, respectively. The results show that when the identical porous plug radial position is 0.6R and the separation angle is 135°, the mixing behavior is the best. Moreover, the optimized parameter combination is obtained based on the response surface model to simultaneously meet the requirements of short MT and small SEA in the LF refining process. Meanwhile, compared with the predicted values, the errors of MT and SEA for different conditions from the experimental values are 1.3% and 2.1%, 1.3% and 4.2%, 2.5% and 3.4%, respectively, which is beneficial to realizing the modeling of argon bottom blowing in the LF refining process and reducing the interference of human factors.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.