The main objective of this paper is to bring a model for firm sustainability performance index by applying both classical and Bayesian structural equation modeling (parametric and semi-parametric modeling). Both techniques are considered to the resea...
Deep Learning (DL) is moving towards deploying workloads not only in cloud datacenters, but also to the local devices. Although these are mostly limited to inference tasks, it still widens the range of possible target architectures significantly. Add...
LoRaWAN is a flagship Low-Power Wide Area Network (LPWAN) technology that has highly attracted much attention from the community in recent years. Many LoRaWAN end-devices, such as sensors or actuators, are expected not to be powered by the electricit...
Accurate modeling of pavement performance is vital to maintaining safe, reliable, and sustainable transportation infrastructure. This review synthesizes current approaches to pavement deterioration modeling, with emphasis on key influencing factors,...
The dynamic performance of a 2-DOF hip joint rehabilitation robot configuration for patients with hip joint dyskinesia was analyzed. There were eight revolute pairs on one side of the hip joint rehabilitation robot configuration. The dynamics of the...
This article presents a detailed approach to constructing a numerical model of a free power turbine engine specifically designed for performance analysis in the Matlab R2024b environment. The core innovation of this model lies in its integration of p...
A fog-based IoT platform model involving three layers, i.e., IoT devices, fog nodes, and the cloud, was proposed using an open Jackson network with feedback. The system performance was analyzed for individual subsystems, and the overall system was ba...
For decades, cancer has remained a persistent health challenge; this project represents a significant stride towards refining treatment approaches and prognostic insights. Proton beam therapy, a radiation therapy modality employing high-energy proton...
With the combustor burning hydrogen, as well as the strongly coupled fuel and cooling system, the configuration of a hydrogen-fueled aero engine is more complex than that of a conventional aero engine. The performance, and especially the dynamic beha...
This study demonstrates the research and development of a visualization method called thermal performance simulation. The objective of this study is providing the results of thermal performance simulation results into building information modeling (B...
This study proposes a multi-level performance margin modeling and belief reliability framework for redundant systems. Starting from system performance, a “performance–margin–reliability” linkage is established by defining the...
The polycrystalline silicon photovoltaic system located in Poland has been investigated from a modeling and an experimental perspective. The five-parameter single-diode (SD) model was used to compute the current–voltage (I-V) characteristics of...
For calculating non-life insurance premiums, actuaries traditionally rely on separate severity and frequency models using covariates to explain the claims loss exposure. In this paper, we focus on the claim severity. First, we build two reference mod...
This paper presents the sizing and performance evaluation of a natural draft air-cooled condenser, with a nominal heat rejection rate of 75 MWth, for implementation at a concentrated solar power plant in the Northern Cape province of South Africa. In...
The application of queueing theory is very broad. Examples include electronic communication systems and devices. New technologies, electronic communication systems, and devices are used by many modern organizations. However, this implies certain requ...
To address the challenge of achieving a unified dynamic evaluation of in-service performance for reflector antennas subjected to coupled wind disturbances, structural flexibility, and servo control, an end-to-end performance evaluation method based o...
Bioinformatics is a branch of science that uses computers, algorithms, and databases to solve biological problems. To achieve more accurate results, researchers need to use large and complex datasets. Sequence alignment is a well-known field of bioin...
A suitable model of coordinated control system (CCS) with high accuracy and simple structure is essential for the design of advanced controllers which can improve the efficiency of the ultra-super-critical (USC) power plant. Therefore, with the deman...
Owing to the variation between lithium-ion battery (LIB) cells, early discharge termination and overdischarge can occur when cells are coupled in series or parallel, thereby triggering a decrease in LIB module performance and safety. This study provi...
In this paper, a meticulous modeling approach is proposed not only for a fuel cell stack itself but also for all auxiliary components that collectively form the fuel cell system. This comprehensive modeling approach encompasses a wide range of compon...
Pavement performance models (PPMs) are utilized to predict pavement network conditions which is an essential part of any sustainable pavement management system (PMS). The reliability of a PMS and its outputs is proportional to the reliability of the...
Prefabricated insulation grid shear walls are a new type of wall which integrates structure, insulation and formwork. A grid-like reinforced concrete shear wall with vertical and transverse limbs is formed by casting concrete into the reserved vertic...
Small-size turbine drilling tools have better application prospects in small borehole drilling and so on. Based on the SST model, the influence of a Φ73 mm turbine knuckle-shape parameters on the mechanical energy output characteristics was simul...
The complex influence of various disturbances on an inertially stabilized platform (ISP) restricts the further improvement of its servo performance. This article investigates the mapping relationship between internal and external disturbances and ser...
In this paper, the performance of two Kalman filter (KF) schemes based on the direct estimated model and differencing estimated model for input rate signal was thoroughly analyzed and compared for combining measurements of a sensor array to improve t...
In this paper, the variable-speed coaxial helicopter is modelled by the blade element method, non-uniform inflow method and empirical function method, and the aerodynamic performance analysis method is proposed. To ensure the accuracy of this method,...
The intriguing rocking behavior of foundations has attracted the attention of both researchers and professionals, owing to its beneficial characteristics such as energy absorption and self-adjusting capability. This paper offers a thorough examinatio...
This study conducts both experimental and statistical analyses of microinverter performance within a compact AC-PV module that integrates a PV panel and a microinverter without battery integration. Using measurement data in combination with correlati...
Traditional expansion joints in bridge structures are prone to durability problems, such as leakage, corrosion, and high maintenance demands, which can significantly reduce service life. To overcome these limitations, ultra-high-performance concrete...
This article presents the results of experimental and computational studies of the performance of a car with a gasoline engine with spark ignition when retrofitted with a system of liquefied petroleum gas (LPG). To analyze the impact of the use of LP...
A comprehensive literature review on the kinematics and dynamics modeling and virtual prototyping (V.P) of the Cartesian robots with a flexible configuration is presented in this paper. Different modeling approaches of the main components of the Cart...
The Mkurumudzi River originates in the Shimba hills and runs through Kwale County on the Kenyan Coast. Study on this river has been informed by the many economic activities that the river supports, which include sugarcane plantations, mining, tourism...
Accurate turbojet engine performance prediction is crucial for condition monitoring, health management, and safe operation. Conventional component-level models require iterative solutions of strongly nonlinear matching equations and are sensitive to...
Biodiesel is considered to be a promising alternative option to diesel fuel. The main contribution of the current work is to improve compression ignition engine performance, fueled by several biodiesel blends. Three metrics were used to evaluate the...
Performance modeling of the characteristics of mid-infrared quantum cascade lasers (MIR QCL) is an essential element in formulating consistent component requirements and specifications, in preparing guidelines for the design and manufacture of the QC...
Redundantly actuated parallel manipulators (PMs) have attracted a great deal of attention since they generally have better stiffness than non-redundantly actuated ones. This paper presents an analytical elastostatic stiffness modeling and performance...
Estuaries are dynamic and resource-rich ecosystems renowned for their high productivity and ecological significance. The Rías Baixas, located in the northwest of the Iberian Peninsula, consist of four highly productive estuaries that support t...
In this study, 3D detailed numerical modeling was performed to evaluate the performance of an artificial recharge–water intake system installed to secure agricultural water in drought areas. Using a 3D irregular finite element grid, a conceptua...
Using the digital economy as a new carrier to drive innovation has become an indispensable strategic support for the progress of countries, while environmental protection is a necessary condition to ensure its sustainable development. A multi-transit...
To meet the requirements of future aircraft for power systems, the turbine inlet temperatures of aero engines are gradually increasing. Ceramic matrix composite (CMC), with its higher thermal limit, has become the preferred material for the turbine b...
BIM has played an important role in promoting sustainable development in the construction industry. The lack of an effective system for evaluating BIM application performance has become a major obstacle to BIM application. Therefore, this study devel...
Database systems have a large number of configuration parameters that control functional and non-functional properties (e.g., performance and cost). Different configurations may lead to different performance values. To understand and predict the effe...
Solar Water Heating Systems (SWHS) are increasingly recognized as vital technologies for reducing dependence on conventional energy sources and supporting sustainable thermal energy solutions. This study reviews recent advancements in the numerical m...
Spiral finned tube heat exchangers are extensively used in petrochemical, power electronics, and metallurgical industries due to their high efficiency and compact design. However, fouling accumulation during operation significantly reduces heat trans...
Finned tube heat exchangers are used in many technological applications in both civil and industrial sectors. Their large-scale use requires a design aimed at reaching high thermal efficiency as well as avoiding unnecessary waste of resources in term...
Spherical hydrostatic-hydrodynamic bearings (SHHBs) combine the advantages of hydrostatic and hydrodynamic lubrication. Endowed with the characteristics of withstanding heavy loads, reducing friction, and self-aligning, they are widely applied in hig...
Liquefied natural gas (LNG) is widely regarded as the midterm solution toward zero-carbon transportation at sea. However, further applications of gas engines are challenging due to their weak dynamic load performance. Therefore, the comprehension of...
The objective of this study was to experimentally quantify and analytically model chloride ion transport in high-performance concrete incorporating single and binary mineral admixtures under sustained compressive loading, thereby improving durability...
Heavy-duty hybrid electric vehicles and marine vessels need a sizeable electric energy storage system (ESS). The size and energy management strategy (EMS) of the ESS affects the system performance, cost, emissions, and safety. Traditional power-deman...
The application of smart construction technologies is becoming a crucial approach to improving safety performance in the construction industry. Existing research often focuses on the qualitative analysis of specific technologies, neglecting a compreh...
of 3,838