Skip to Content

487 Results Found

  • Article
  • Open Access
8 Citations
2,628 Views
14 Pages

Effects of Nozzle Types and Spraying Volume on the Control of Hypera postica Gyllenhal by Using An Unmanned Aerial Vehicle

  • Hui Liu,
  • Zechen Dou,
  • Yong Ma,
  • Linxi Pan and ,
  • Hao Ren,
  • Xuzhe Wang,
  • Chunhui Ma and
  • Xiaoqiang Han
  • + 3 authors+ 0 author

30 August 2023

In the current study, an unmanned aerial vehicle (UAV) was selected for agricultural spraying, with two nozzles, two insecticides and three spraying volumes as the spraying variables; this paper explores the impact of spraying volume on the droplet d...

(This article belongs to the Section Pest and Disease Management)
  • Article
  • Open Access
4 Citations
5,518 Views
14 Pages

11 September 2019

In this paper, a new bell-type air nozzle, which overcomes the structural defects of traditional bell-type air nozzles, is proposed and validated by cold test and numerical simulation. The pressure drop characteristic of the new bell-type air nozzle...

(This article belongs to the Section Applied Industrial Technologies)
  • Article
  • Open Access
3 Citations
4,556 Views
17 Pages

Multi-Objective Optimization of Rocket-Type Pulse Detonation Engine Nozzles

  • Alberto Gonzalez-Viana,
  • Francisco Sastre,
  • Elena Martin and
  • Angel Velazquez

This numerical study addressed the multi-objective optimization of a rocket-type Pulse Detonation Engine nozzle. The Pulse Detonation Engine consisted of a constant length, constant diameter cylindrical section plus a nozzle that could be either conv...

(This article belongs to the Special Issue Advances in Detonative Propulsion (2nd Edition))
  • Article
  • Open Access
7 Citations
3,356 Views
10 Pages

Herbicide Spray Deposition in Wheat Stubble as Affected by Nozzle Type and Application Direction

  • Luana M. Simão,
  • Amanda C. Easterly,
  • Greg R. Kruger and
  • Cody F. Creech

3 October 2020

Tall wheat (Triticum aestivum L.) stubble can enhance soil water conservation during the fallow-period by trapping snow and decreasing evaporation. However, standing wheat stubble can intercept herbicide spray droplets before they reach their intende...

(This article belongs to the Special Issue Weed Management and Pesticide Application Technology)
  • Article
  • Open Access
23 Citations
6,177 Views
17 Pages

30 March 2016

Tree-type drilling is a new technique for drilling radial tree-type boreholes in coal seams in underground mines using water jets to break the coal. The aim is to drain gas from the coal seams in larger quantities and from larger areas than can be do...

  • Article
  • Open Access
4 Citations
5,911 Views
21 Pages

3 February 2025

Small-scale and supersonic convergent-divergent type micro-nozzles with characteristic sizes of around a few centimeters and exit and throat radii of tenths of millimeters were the subjects of this study. Using the schlieren Z-type optical technique,...

(This article belongs to the Special Issue Flow Control Techniques: Advances in Flow System Analysis, Modeling and Applications)
  • Article
  • Open Access
2,269 Views
14 Pages

6 February 2023

The difference of deashing performance between the areas of positive-to-blowing holes and that of non-positive-to-blowing holes is an important problem that causes a non-uniform deashing performance to a flat box filter cartridge, which limits the im...

(This article belongs to the Special Issue Control and Purification of Particulate Matter)
  • Article
  • Open Access
500 Views
15 Pages

24 June 2026

A vertical-type high-speed twin-roll caster can cast strips at a speed of 60 m/min. However, ripple marks, which are typical surface defects on strips cast using a twin-roll caster, also appear on strips cast using this caster. In the present study,...

(This article belongs to the Special Issue Preparation, Formation and Application of Light Alloys and Their Composites)
  • Article
  • Open Access
1 Citations
526 Views
16 Pages

19 May 2026

Adequate spray deposition and penetration of pesticides into the lower part of the soybean canopy can increase the chances of successfully protecting plants from diseases and insects. Only a small number of comprehensive studies have examined how spr...

(This article belongs to the Section Farming Sustainability)
  • Article
  • Open Access
25 Citations
6,220 Views
18 Pages

Numerical Simulations of Molten Breakup Behaviors of a de Laval-Type Nozzle, and the Effects of Atomization Parameters on Particle Size Distribution

  • Lianghui Xu,
  • Xianglin Zhou,
  • Jinghao Li,
  • Yunfei Hu and ,
  • Hang Qi,
  • Wei Wen,
  • Kaiping Du,
  • Yao Ma and
  • Yueguang Yu
  • + 4 authors+ 0 author

22 August 2020

In this work, an atomizer with a de Laval-type nozzle is designed and studied by commercial computational fluid dynamics (CFD) software, and the secondary breakup process during atomization is simulated by two-way coupling and the discrete particle m...

(This article belongs to the Section AI-Enabled Process Engineering)
  • Article
  • Open Access
2 Citations
1,348 Views
14 Pages

Droplet Deposition and Transfer in Coffee Cultivation Under Different Spray Rates and Nozzle Types

  • Layanara Oliveira Faria,
  • Cleyton Batista de Alvarenga,
  • Gustavo Moreira Ribeiro,
  • Renan Zampiroli and ,
  • Fábio Janoni Carvalho,
  • Daniel Passarelli Lupoli Barbosa,
  • Luana de Lima Lopes,
  • João Paulo Arantes Rodrigues da Cunha and
  • Paula Cristina Natalino Rinaldi
  • + 4 authors+ 0 author

Optimising spraying operations in coffee cultivation can enhance both application efficiency and effectiveness. However, no studies have specifically assessed droplet deposition on leaves adjacent to the spray application band—fraction of dropl...

(This article belongs to the Section Agricultural Mechanization and Machinery)
  • Article
  • Open Access
21 Citations
8,442 Views
17 Pages

Effective spraying is an important component of precision agriculture, directly influencing the efficiency of the spray materials. Despite their potential, optimal settings for sprayer drones remain underexplored due to limited research data. This st...

  • Article
  • Open Access
2 Citations
2,237 Views
16 Pages

High-Speed Fluorescence Imaging Corroborates Biological Data on the Influence of Different Nozzle Types on Cell Spray Viability and Formation

  • Miriam Heuer,
  • Mehdi Stiti,
  • Volker Eras,
  • Julia Scholz and ,
  • Norus Ahmed,
  • Edouard Berrocal and
  • Jan C. Brune
  • + 2 authors+ 0 author

Treating severe dermal disruptions often presents significant challenges. Recent advancements have explored biological cell sprays as a promising treatment, but their success hinges on efficient cell delivery and complete wound coverage. This require...

(This article belongs to the Special Issue Biomaterials in Medical Diagnosis and Treatment)
  • Article
  • Open Access
13 Citations
5,743 Views
20 Pages

26 April 2020

The consequences of gravity and the nozzle inclination angle in the powder-fed Directed Energy Deposition (DED) process were examined in this study. We also sought to define guidelines and manufacturing strategies, depending on the DED system configu...

(This article belongs to the Special Issue Additive Manufacturing of Metals with Lasers)
  • Article
  • Open Access
6 Citations
4,207 Views
15 Pages

Performance of a Prototype Boom Sprayer for Bed-Grown Carrots Based on Canopy Deposition Optimization, Ground Losses and Spray Drift Potential Mitigation in Semi-Field Conditions

  • Aude Lamare,
  • Ingrid Zwertvaegher,
  • David Nuyttens,
  • Paolo Balsari and ,
  • Paolo Marucco,
  • Marco Grella,
  • Amedeo Caffini,
  • Nikos Mylonas,
  • Spyros Fountas and
  • Jean-Paul Douzals
  • + 5 authors+ 0 author

28 April 2022

The H2020-project OPTIMA concept of smart sprayer relies on several functionalities, including variable nozzle spacing for bed-grown carrots, based on an air-assisted boom sprayer. A prototype boom was designed and evaluated though canopy deposition,...

(This article belongs to the Special Issue Precision Technologies and Novel Farming Practices to Reduce Chemical Inputs in Agriculture)
  • Article
  • Open Access
8 Citations
3,733 Views
23 Pages

31 January 2024

A two-way coupled model between polydisperse particle phases with compressible gases and a density-based coupling implicit solution method, combining the third-order MUSCL with QUICK spatial discretization scheme and the second-order temporal discret...

  • Article
  • Open Access
3 Citations
1,635 Views
12 Pages

14 October 2025

Flow stabilization and velocity uniformity in a Göttingen-type closed-circuit subsonic aerodynamic wind tunnel with an expanded test section are investigated in this study. Both experimental and numerical approaches were employed. The experiment...

(This article belongs to the Topic Innovations and Emerging Research in Sustainable Energy, Environment and Agriculture)
  • Article
  • Open Access
8 Citations
3,157 Views
16 Pages

Spray Deposition and Weed Control Efficacy of a Real-Time Variable-Rate Boom Sprayer Applying Herbicide at Reduced Doses in Summer Maize Fields

  • Chunxia Quan,
  • Jinwei Zhang,
  • Xiaofu Feng,
  • Huiyuan Zhang and ,
  • Mengran Yang,
  • Zhaoyan Zhu,
  • Xiongkui He and
  • Changling Wang
  • + 3 authors+ 0 author

13 August 2025

Maize, as a critical crop for China’s food security, is constantly challenged by weed infestations and environmental risks associated with herbicide overuse. Improving herbicide utilization efficiency through equipment optimization and intellig...

(This article belongs to the Special Issue Novel Studies in High-Performance and Precision Plant Protection Products Application—2nd Edition)
  • Article
  • Open Access
7 Citations
4,940 Views
17 Pages

Enhancement of Film Cooling Effectiveness in a Supersonic Nozzle

  • Nithin Somasekharan,
  • A. R. Srikrishnan,
  • Harihara Sudhan Kumar,
  • Krishna Prasad Ganesh and ,
  • Akram Mohammad and
  • Ratna Kishore Velamati
  • + 1 author+ 0 author

10 March 2023

Film cooling as applied to rocket nozzles is analyzed numerically with emphasis on the assessment of the effect of the mixing of coolant with the hot stream. Cooling performance, as characterized by cooling effectiveness, is studied for three differe...

(This article belongs to the Special Issue Applied Thermodynamics and Heat Transfer)
  • Article
  • Open Access
20 Citations
6,624 Views
18 Pages

Comparison between Drift Test Bench and Other Techniques in Spray Drift Evaluation of an Eight-Rotor Unmanned Aerial Spraying System: The Influence of Meteorological Parameters and Nozzle Types

  • Changling Wang,
  • Supakorn Wongsuk,
  • Zhan Huang,
  • Congwei Yu and ,
  • Leng Han,
  • Jun Zhang,
  • Wenkang Sun,
  • Aijun Zeng and
  • Xiongkui He
  • + 4 authors+ 0 author

16 January 2023

In the past decade, an unmanned aerial spraying system (UASS) was applied more and more widely for low-volume aerial pesticides spraying operations in China. However, UASS have a higher drift risk due to more fine droplets sprayed with a higher worki...

(This article belongs to the Special Issue Agricultural Environment and Intelligent Plant Protection Equipment)
  • Article
  • Open Access
33 Citations
6,612 Views
12 Pages

17 December 2015

Due to the increasing depths of coal mines and the low permeability of some coal seams, conventional methods of gas drainage in underground mines are facing many problems. To improve gas extraction, a new technique using water jets to drill tree-type...

  • Article
  • Open Access
983 Views
17 Pages

29 April 2026

This study applies selective laser melting (SLM) to fabricate stainless steel 316L (SS316L) structures on the distribution plate of a Venturi-type nozzle in a pressurized dissolution microbubble generator. SLM is employed because the fabricated struc...

(This article belongs to the Special Issue Laser-Assisted Ultra-Precision Machining)
  • Article
  • Open Access
19 Citations
3,779 Views
17 Pages

Evaluation of Spray Drift from an Electric Boom Sprayer: Impact of Boom Height and Nozzle Type

  • Xiaoyong Pan,
  • Shuo Yang,
  • Yuanyuan Gao,
  • Zhichong Wang and ,
  • Changyuan Zhai and
  • Wei Qiu
  • + 1 author+ 0 author

10 January 2025

In the Huang-Huai-Hai region of China, the instability of electric boom sprayers has prompted many farmers to raise the boom height to improve clearance. However, the drift risks associated with these conditions remain poorly assessed. This study inv...

(This article belongs to the Special Issue Novel Studies in High-Performance and Precision Plant Protection Products Application—2nd Edition)
  • Article
  • Open Access
9 Citations
3,185 Views
14 Pages

Fixed Spraying Systems Application in Citrus Orchards: Nozzle Type and Nozzle Position Effects on Droplet Deposition and Pest Control

  • Chen Chen,
  • Xinyu Xue,
  • Qingqing Zhou,
  • Wei Gu and ,
  • Songchao Zhang and
  • Chundu Wu
  • + 1 author+ 0 author

16 November 2023

Pesticide application is an essential means of controlling plant diseases and pests in citrus orchards. In recent years, fixed spraying systems have gradually been used as alternatives to traditional sprayers and manual sprayers in some hilly citrus...

(This article belongs to the Section Precision and Digital Agriculture)
  • Article
  • Open Access
7 Citations
9,005 Views
13 Pages

High Purity and Yield of Boron Nitride Nanotubes Using Amorphous Boron and a Nozzle-Type Reactor

  • Jaewoo Kim,
  • Duckbong Seo,
  • Jeseung Yoo,
  • Wanseop Jeong and ,
  • Young-Soo Seo and
  • Jaeyong Kim
  • + 1 author+ 0 author

11 August 2014

Enhancement of the production yield of boron nitride nanotubes (BNNTs) with high purity was achieved using an amorphous boron-based precursor and a nozzle-type reactor. Use of a mixture of amorphous boron and Fe decreases the milling time for the pre...

(This article belongs to the Special Issue Compound Semiconductor Materials 2014)
  • Article
  • Open Access
7 Citations
3,303 Views
11 Pages

The Influence of Wetting Agent and Type of Nozzle on Copper Hydroxide Deposit on Sugar Beet Leaves (Beta vulgaris L.)

  • Aleksandar Sedlar,
  • Sonja Gvozdenac,
  • Momčilo Pejović,
  • Vladimir Višacki and ,
  • Jan Turan,
  • Snežana Tanasković,
  • Patrik Burg and
  • Filip Vasić
  • + 3 authors+ 0 author

11 March 2022

Protective fungicides are sensitive to environmental conditions such as rainfall and solar radiation. Therefore, it is important to prolong the biological activity and fungicide resistance to the above-mentioned factors that can be achieved by adding...

(This article belongs to the Special Issue Precision Technologies and Novel Farming Practices to Reduce Chemical Inputs in Agriculture)
  • Article
  • Open Access
2 Citations
5,582 Views
25 Pages

Investigation of Slot-Burner Aerodynamics with Recessed-Type Nozzle Geometry

  • Arafat Ahmed Bhuiyan,
  • Md. Rezwanul Karim,
  • James T. Hart,
  • Peter J. Witt and
  • Jamal Naser

8 April 2016

The aerodynamics of fully turbulent jets supplied from rectangular slot-burners was modelled using the Reynolds Averaged Navier–Stokes (RANS) model. Three different turbulent models were considered, such as standard k-ε, RNG k-ε and Reynolds stress t...

(This article belongs to the Special Issue Computational Fluid Dynamics)
  • Article
  • Open Access
7 Citations
3,768 Views
15 Pages

11 November 2023

Recent advancements in 3D printing technology have integrated with Fourth Industrial Revolution technologies such as robotics and artificial intelligence, aiming to overcome the limitations of conventional manufacturing methods. In the field of funct...

(This article belongs to the Special Issue Recent Advances in 3D Printing and Additive Manufacturing Technology)
  • Proceeding Paper
  • Open Access
759 Views
7 Pages

Unmanned aerial vehicle (UAV)-based spraying is transforming precision agriculture by enabling targeted, uniform agrochemical application. This study evaluates four nozzle types across three flight heights for rice crop canopy, analyzing spray metric...

(This article belongs to the Proceedings of The 3rd International Online Conference on Agriculture)
  • Article
  • Open Access
1 Citations
772 Views
18 Pages

Soybean Foliar Deposition and Airflow Distribution Interrelated to Nozzle Type and Boom Travel Direction in Wind Tunnel

  • João Paulo Arantes Rodrigues da Cunha,
  • Rone Batista de Oliveira,
  • Gabriel de Souza Lemes,
  • Erdal Ozkan and ,
  • Hongyoung Jeon and
  • Heping Zhu
  • + 1 author+ 0 author

27 March 2026

Spray deposition and coverage within soybean canopies remain critical challenges for achieving effective pesticide applications, particularly under windy conditions. This research investigated the influence of wind speed, boom travel direction relati...

(This article belongs to the Section Plant Protection and Biotic Interactions)
  • Article
  • Open Access
7 Citations
5,118 Views
15 Pages

Comparison of Volumetric Distribution in Drone Spraying Considering Height, Application Volume, and Nozzle Type

  • Raí Fernandes Queiroz Alves,
  • Jéssica Elaine Silva,
  • Thiago Orlando Costa Barboza,
  • Marcelo Araújo Junqueira Ferraz and ,
  • Octávio Pereira da Costa,
  • Wender Henrique Batista da Silva,
  • Franklin Daniel Inácio,
  • Luan Pereira de Oliveira,
  • Christiane Augusta Diniz Melo and
  • Adão Felipe dos Santos
  • + 5 authors+ 0 author

The advancement of technology in agriculture has driven the use of drones for spraying, with their increasing adoption presenting challenges in calibration and volumetric distribution efficiency. This study aimed to evaluate the volumetric distributi...

(This article belongs to the Special Issue Research Progress and Challenges of Agricultural Information Technology)
  • Article
  • Open Access
104 Citations
11,195 Views
31 Pages

Role of Fungicides, Application of Nozzle Types, and the Resistance Level of Wheat Varieties in the Control of Fusarium Head Blight and Deoxynivalenol

  • Ákos Mesterházy,
  • Beáta Tóth,
  • Monika Varga,
  • Tibor Bartók and ,
  • Ágnes Szabó-Hevér,
  • László Farády and
  • Szabolcs Lehoczki-Krsjak
  • + 2 authors+ 0 author

16 November 2011

Fungicide application is a key factor in the control of mycotoxin contamination in the harvested wheat grain. However, the practical results are often disappointing. In 2000–2004, 2006–2008 and 2007 and 2008, three experiments were made to test the e...

(This article belongs to the Special Issue Trichothecenes)
  • Article
  • Open Access
9 Citations
2,637 Views
15 Pages

Effect of Polymer Adjuvant Type and Concentration on Atomization Characteristics of Nozzle

  • Peng Hu,
  • Ruirui Zhang,
  • Liping Chen,
  • Longlong Li and ,
  • Qing Tang,
  • Wenlong Yan and
  • Jiajun Yang
  • + 2 authors+ 0 author

(1) Background: Various types of adjuvants are added during application to enhance the spraying effect, but most adjuvant formulations are proprietary products, and their exact compositions have not been disclosed. (2) Methods: The spatial distributi...

(This article belongs to the Section Agricultural Technology)
  • Article
  • Open Access
13 Citations
3,783 Views
18 Pages

Performance of Drift-Reducing Nozzles in Controlling Small Weed Seedlings with Contact Herbicides

  • Benny De Cauwer,
  • Ilke De Meuter,
  • Sander De Ryck,
  • Donald Dekeyser and ,
  • Ingrid Zwertvaegher and
  • David Nuyttens
  • + 1 author+ 0 author

10 May 2023

In many EU countries, spray applications should comply with increasingly stringent requirements regarding the drift reduction class of spray nozzles. Many farmers fear that the use of drift-reducing nozzles producing coarse droplet spectra may compro...

(This article belongs to the Section Weed Science and Weed Management)
  • Article
  • Open Access
3 Citations
3,117 Views
20 Pages

11 February 2025

As the third generation of thin slab continuous casting and rolling technology, endless strip production (ESP) has been widely used in the steelmaking industry. The key equipment in this process, the funnel-type mold, is prone to accidents such as sl...

(This article belongs to the Special Issue Advances in Continuous Casting and Refining of Steel)
  • Article
  • Open Access
1 Citations
2,718 Views
17 Pages

28 September 2022

Existing approaches to assessing the reliability and safe operation of downhole equipment provide for assessing only the direct impact of erosion and corrosion processes on the degradation of the material. At the same time, the influence of downhole...

(This article belongs to the Special Issue Corrosion Prediction and Corrosion Protection)
  • Review
  • Open Access
93 Citations
23,174 Views
24 Pages

Advances in Sprinkler Irrigation: A Review in the Context of Precision Irrigation for Crop Production

  • Junaid Nawaz Chauhdary,
  • Hong Li,
  • Yue Jiang,
  • Xuwei Pan and ,
  • Zawar Hussain,
  • Maria Javaid and
  • Muhammad Rizwan
  • + 2 authors+ 0 author

23 December 2023

The non-judicious use of water at the farm level in traditional irrigation application methods is a present-day concern across the world that can be resolved by enhancing application efficiency through the adoption of advanced irrigation techniques....

(This article belongs to the Special Issue Improving Irrigation Management Practices for Agricultural Production)
  • Article
  • Open Access
6 Citations
2,115 Views
16 Pages

Study on the Diffusion Parameters of Newtonian Fluid in High-Pressure Jet Disturbance Grouting

  • Jian Zhang,
  • Yikai Xu,
  • Duohua Wu,
  • Chuanxiao Liu and ,
  • Guangtan Cheng,
  • Qiang Gao,
  • Zhe Ren and
  • Changle Guo
  • + 3 authors+ 0 author

In order to investigate the diffusion mechanism of slurry in post-pile grouting, this study develops a formula for calculating the diameter and the climb height of the cement core of jet grouting (CCJG). This research conducts field orthogonal tests...

(This article belongs to the Section Building Energy, Physics, Environment, and Systems)
  • Article
  • Open Access
13 Citations
3,923 Views
46 Pages

Effect of the Airblast Settings on the Vertical Spray Profile: Implementation on an On-Line Decision Aid for Citrus Treatments

  • Cruz Garcera,
  • Enrique Moltó,
  • Héctor Izquierdo,
  • Paolo Balsari and ,
  • Paolo Marucco,
  • Marco Grella,
  • Fabrizio Gioelli and
  • Patricia Chueca
  • + 3 authors+ 0 author

17 June 2022

Airblast sprayers are widely used for the application of plant protection products (PPP) in citrus. Adaptation of the vertical distribution of the spray cloud to the canopy (density, shape and size), is essential to deposit an adequate amount of PPP...

(This article belongs to the Special Issue Selected Papers from 11th Iberian Agroengineering Congress)
  • Article
  • Open Access
21 Citations
11,796 Views
18 Pages

Development of a Piezo-Driven Liquid Jet Dispenser with Hinge-Lever Amplification Mechanism

  • Mojiz Abbas Trimzi,
  • Young Bog Ham,
  • Byeung Cheol An,
  • Young Min Choi and ,
  • Jung Ho Park and
  • So Nam Yun
  • + 1 author+ 0 author

21 January 2020

Owing to the quick response, compact structure, high precision, huge blocking force generation, and ease of operation, piezoelectric actuators are urgently being adopted in the field of advanced dispensing for jetting performance improvement and fulf...

(This article belongs to the Special Issue Selected Papers from the ICAE 2019)
  • Article
  • Open Access
33 Citations
10,939 Views
15 Pages

25 December 2021

Material extrusion additive manufacturing (MEAM) is an advanced manufacturing method that produces parts via layer-wise addition of material. The potential of MEAM to prototype lattice structures is remarkable, but restrictions imposed by manufacturi...

(This article belongs to the Section Materials Engineering)
  • Article
  • Open Access
3 Citations
3,106 Views
17 Pages

Impact of Novel Nozzles on Atomization Flow Field and Particle Features: Simulation and Experimental Validation

  • Kai Wang,
  • Zhongliang Zhou,
  • Wenhai Sun,
  • Yanhui Zhang and ,
  • Suode Zhang and
  • Jianqiang Wang
  • + 1 author+ 0 author

13 March 2025

Gas-atomized powder characteristics significantly impact additive manufacturing processes. Two innovative nozzles, semi-converging–diverging nozzle type II and fully converging–diverging nozzle type III, were designed based on the traditi...

  • Article
  • Open Access
16 Citations
8,189 Views
13 Pages

28 August 2018

An axisymmetric synthetic jet actuator based on a loudspeaker and five types of flanged nozzles were experimentally tested and compared. The first (reference) type of nozzle was a common sharp-edged circular hole. The second type had a rounded lip on...

(This article belongs to the Special Issue Synthetic Jet Actuators)
  • Article
  • Open Access
40 Citations
9,363 Views
25 Pages

Numerical Analysis of Nozzle Flow and Spray Characteristics from Different Nozzles Using Diesel and Biofuel Blends

  • M.H.H. Ishak,
  • Farzad Ismail,
  • Sharzali Che Mat,
  • M.Z. Abdullah and ,
  • M.S. Abdul Aziz and
  • M.Y. Idroas
  • + 1 author+ 0 author

17 January 2019

In this paper, the discrete phase model (DPM) was introduced to study the fuel injector cavitations process and the macro spray characteristic of three different types of nozzle spray shape with diesel and hybrid biofuel blend for several injection p...

  • Article
  • Open Access
10 Citations
2,468 Views
14 Pages

Physical and Numerical Simulation Study on Structure Optimization of the Inner Wall of Submerged Entry Nozzle for Continuous Casting of Molten Steel

  • Changyou Cai,
  • Ming Zhao,
  • Minggang Shen,
  • Yuhua Pan and ,
  • Xin Deng and
  • Chunyang Shi
  • + 1 author+ 0 author

16 November 2023

The submerged entry nozzle (SEN) plays an important role in the continuous casting production process. It is a cast refractory pipe fitting installed in the lower part of the tundish and inserted below the molten steel level of the mold. It not only...

(This article belongs to the Special Issue Modeling, Simulation, Control, and Optimization of Processes)
  • Article
  • Open Access
2 Citations
1,446 Views
12 Pages

Effect of Weld Shape on Temperature Field of Nozzle Flowmeter

  • Yuliang Zhang,
  • Jiangbo Tong and
  • Zuchao Zhu

20 July 2023

Weld shapes significantly impact nozzle safety, and a number of accidents have occurred due to nozzle cracking. In order to improve weld safety and reveal the effect of weld shape on the temperature field of nozzle flowmeters, this study established...

  • Article
  • Open Access
37 Citations
6,657 Views
17 Pages

Modelling Spray Pressure Effects on Droplet Size Distribution from Agricultural Nozzles

  • Emanuele Cerruto,
  • Giuseppe Manetto,
  • Rita Papa and
  • Domenico Longo

6 October 2021

For spray applications, drop size is the most important feature as it affects all aspects of a phytosanitary treatment: biological efficacy, environmental pollution, and operator safety. In turn, drop size distribution depends on nozzle type, liquid...

(This article belongs to the Special Issue Precision Technologies and Novel Farming Practices to Reduce Chemical Inputs in Agriculture)
  • Article
  • Open Access
1 Citations
1,644 Views
15 Pages

20 January 2026

In the present work, a direct oil cooling strategy using a multi-nozzle configuration is proposed for the thermal management of high-power density electric machines. The stator and winding temperatures, heat transfer coefficient, injection pressure,...

(This article belongs to the Section Machine Design and Theory)
  • Article
  • Open Access
14 Citations
6,312 Views
11 Pages

Study on the Common Rail Type Injector Nozzle Design Based on the Nozzle Flow Model

  • Sang-Wook Han,
  • Yun-Sub Shin,
  • Hyun-Chul Kim and
  • Gee-Soo Lee

11 January 2020

In this paper, a nozzle flow model was used to design an injector nozzle and obtain initial spray conditions for the dimethyl ether (DME) common rail-injection system. In order to deliver the same amount of energy as that provided by diesel at a low...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
2 Citations
1,901 Views
13 Pages

Effect of Nozzle Structure on Energy Separation Performance in Vortex Tubes

  • Ming Tang,
  • Gongyu Jin,
  • Jiali Zhang,
  • Fuxing Guo and ,
  • Fengyu Jia and
  • Bo Wang
  • + 1 author+ 0 author

4 September 2025

Vortex tubes are used in specialized scenarios where conventional refrigeration systems are impractical, such as tool cooling in CNC machines. The internal flow within a vortex tube is highly complex, with numerous factors influencing its energy sepa...

of 10