- Article
The squared momentum transfer spectra of
The squared momentum transfer spectra of
In this paper, the temperature shock phenomenon is considered. This phenomenon occurs during the operation of engineering structures on Earth and in outer space. A rectangular plate has been selected as a structural element exposed to temperature sho...
The shaft resistance of cast-in-place piles in permafrost regions is commonly estimated using the initial moisture content and frozen-soil strength parameters obtained during site investigation. However, concrete hydration heat disturbs the temperatu...
The hot deconfined matter called quark–gluon plasma (QGP) can be generated in relativistic heavy-ion collisions (HICs). Its properties under high temperatures have been widely studied. Since the short-lived QGP is not directly observable, data-...
Gas influx during managed pressure drilling alters the annular hydrostatic and frictional pressures as the gas migrates and expands, complicating bottom-hole pressure (BHP) regulation. Control-oriented two-phase-flow models that neglect dynamic gas t...
This paper considers a rod with an insulated side surface, at the edges of which there is heat exchange with the external environment. It is assumed that the thermal process in the rod is controlled by the effect of the ambient temperature on the the...
In this study, ion-beam-induced luminescence with 2 MeV H+ was used to excite YAG single crystals at different temperatures. Under several constant temperatures, the luminescence intensity of Yb2+ monotonically decreases with increasing fluence, even...
Magnetorheological (MR) fluids are known for their controllable characteristics under the influence of magnetic fields and, hence, widely used as semi-active actuators for vibration control. Regardless of advantages such as fast response time and rev...
The Mpemba effect, where a hotter system can enter a cold phase faster than a cooler one, remains a counterintuitive phenomenon whose origins are still being unraveled. In this work, we propose and demonstrate a simple and general mechanism for the g...
Maximizing the amount of work harvested from an environment is important for a wide variety of biological and technological processes, from energy-harvesting processes such as photosynthesis to energy storage systems such as fuels and batteries. Here...
The effects of cold surface temperature, wet air state (temperature and humidity) and original drop size on frost dendrites growth of two neighboring separate frozen water drops of same size under natural convection conditions were investigated by qu...
Nanocrystalline metals possessing excellent mechanical strength have great potential to replace traditional metal materials as structural materials, but their poor resistance to creep deformation seriously restricts their engineering applications at...
The Markovian time evolution of the entropy production rate is studied as a measure of irreversibility generated in a bipartite quantum system consisting of two coupled bosonic modes immersed in a common thermal environment. The dynamics of the syste...
We use superoperator techniques to solve the master equation for the interaction between a single-mode quantized field and a single mechanical mode of a moving mirror, which is coupled to a zero-temperature reservoir that damps its amplitude. The sol...
This study investigates the transient lubrication dynamics of subway gearboxes during acceleration phases through computational fluid dynamics (CFD) modeling. A simplified gearbox model with helical gears, bearings, and oil-guide channels was develop...
In this article, we report on numerical simulations of laminar Rayleigh–Bénard convection of air in cuboids. We provide numerical evidence of the existence of multiple steady states when the aspect ratio of the cuboid is sufficiently lar...
Furfuryl alcohol (FA) is a biobased monomer derived from lignocellulosic biomass. The present work describes its polymerization in the presence of protic polar solvents, i.e., water or isopropyl alcohol (IPA), using maleic anhydride (MA) as an acidic...
We used the multichannel quantum defect theory to compute cross sections and rate coefficients for the dissociative recombination of CH
This paper examines the effects of climate change on income inequality in the United States. Computing impulse response functions (IRFs) from the local projections’ method, we empirically show that there is an immediate temporary positive respo...
Mass concrete is usually poured in layers. To ensure the interlayer bonding quality of concrete, the lower layer should be kept in a plastic state before the upper layer is added. Ultimately, it will lead to the prediction of concrete setting time as...
We present a freeze-out approach for describing the formation of heavy elements in expanding nuclear matter. Applying concepts used in modeling heavy-ion collisions or ternary fission, we determine the abundances of heavy elements taking into account...
We developed a simple form of thermal molecular beam catalytic reactor system which is capable of measuring sticking probabilities and reaction probabilities, together with angle-resolved scattering of molecules and products during catalytic reaction...
We study the statistics of energy fluctuations in a three-level quantum system subject to a sequence of projective quantum measurements. We check that, as expected, the quantum Jarzynski equality holds provided that the initial state is thermal. The...
In this study, as a vital part of the production of Mn-increased 5083 Al alloy, i.e., homogenization annealing before hot rolling, the target states of key Al6Mn precipitation, including the dispersed, initial coarsening and intensive coarsening stat...
Indonesia has no reliable thermal comfort standard that is based on research works. The current national standard (SNI 6390:2011) states only a single range of comfort temperature that is 25.5 °C Ta, with a range of +1.5 °C Ta. Previous thermal studi...
In the Euclidean form of the theory of gravity, where there is no dedicated time parameter, a generalized canonical form of the principle of least action is proposed. On its basis, the quantum principle of least action is formulated, in which the &ld...
The main goal of this contribution is to evaluate the mechanical properties, strengthening contributions and microstructure development of austenitic stainless steel AISI 316 LN with high nitrogen content in the states characterized as the initial st...
Ambient temperature is a significant factor that influences the characteristics of lithium-ion batteries, which can produce adverse effects on state of charge (SOC) estimation. In this paper, an integrated SOC algorithm that combines an advanced ampe...
The interfacial bond between cement concrete base plate (CCBP) and asphalt concrete waterproofing layer (ACWL) is a weak portion in the newly developed Chinese high-speed railway ballastless track. The interface damage caused due to fluctuating tempe...
Ice accumulation on airfoils and engines seriously endangers fight safety. The design of anti-icing/de-icing systems calls for an accurate measurement of the adhesion strength between ice and substrates. In this research, a test bench for adhesion st...
Starting from a symmetrical multiple-choice individual, I build a sociophysics model of decision-making. Reducing the choices to two and interactions to pairs recovers the Ising model from physics at zero temperature. The associated equilibrium state...
Results from the Relativistic Heavy Ion Colloder (RHIC) and the Large Hadron Collider (LHC) experiments show that in relativistic heavy ion collisions, a new state of matter, a strongly interacting perfect fluid, is created. Accelerating, exact and e...
A low-temperature aerosol cooling and lubrication grinding test bench was built to evaluate the cooling and lubrication performance of the low-temperature aerosol. The mechanism of grinding residual stresses in the inner ring raceway under the coupli...
Stress-strain curves of the EN AW 6082 aluminium alloy with 1.2 Si-0.51 Mg-0.75 Mn (wt.%) were determined by the uniaxial compression tests at temperatures of 450–550 °C with a strain rate of 0.5–10 s−1. The initial structure state corresponded to th...
The paper investigates the stress–strain state of a homogeneous rectangular plate after a temperature shock. It is believed that the plate is the first approximation of the solar panel model of a small spacecraft. To study the stress–stra...
In the context of energy structure transition, Enhanced Geothermal Systems (EGSs) represent a core technology for developing hot dry rock (HDR) resources. However, the ultra-long-term natural recovery patterns of reservoir temperature after heat extr...
The safety of power batteries has received more and more attention in promoting electric vehicles. The external short circuit is particularly prominent as an abnormal and harmful event of a battery, and the exploration of in-situ low-cost detection t...
The accurate estimation of the state of charge (SOC) for lithium-ion batteries’ performance prediction and durability evaluation is of paramount importance, which is significant to ensure reliability and stability for electric vehicles. The SOC...
Transition processes in a steel conductive strip are analyzed during its induction heating under a quasi-steady electromagnetic field. In particular, the temperature field in the strip is studied. A method of solving corresponding initial boundary pr...
In this article, we are interested in studying and analyzing the heat conduction phenomenon in a multi-layered solid. We consider the physical assumptions that the dual-phase-lag model governs the heat flow on each solid layer. We introduce a one-dim...
In the course of studying Diels–Alder reactions of 4-vinylimidazoles with N-phenylmaleimide, it was discovered that they engage in cycloaddition at room temperature to give high yields of the initial cycloadduct as a single stereoisomer. In cer...
This study aims to elucidate the heat and mass transfer mechanisms, quality changes, and drying state prediction during deep-bed hot air drying of wheat. The experiment was conducted to examine the effects of hot air temperature (50, 60, and 70 °...
Initial studies on aging detection of three way catalysts with a microwave cavity perturbation method were conducted. Two physico-chemical effects correlate with the aging state. At high temperatures, the resonance frequencies for oxidized catalysts...
Thermotropic mesogens typically exist as liquid crystals (LCs) in a narrow region of high temperatures, making lowering their melting point with the temperature expansion of the mesophase state an urgent task. Para-substituted benzoic acids can form...
The influence of the heat treatment regime and the initial temperature on the strength characteristics of the cast heat-resistant superalloy Inconel 718 under shock loading has been studied. For samples of four types: in the as-received state, in the...
We used the COMPASS forcefield to perform molecular dynamics (MD) simulation of a mixture composed of three alkanes as the lubricant for the thin-film lubrication. The viscosity of the lubrication film in the non-working state, the final film thickne...
This study addresses the effects of the SOC (State of Charge) and the charging–discharging process on the thermal runaway of 18650 lithium-ion batteries. A series of experiments were conducted on an electric heating and testing apparatus. The experim...
With the widespread application of electric vehicles and electrical energy storage systems, the accurate monitoring of lithium battery states has become crucial for ensuring safety and improving efficiency in terms of the applications. For this reaso...
Electric vehicles (EVs) powered by lithium-ion batteries are crucial for sustainable transportation. Accurate State of Charge (SOC) estimation, a core function of Battery Management Systems (BMS), enhances battery performance, lifespan, and safety. T...
This article presents a study of the viscoelastic behavior of an epoxy polymer and a glass-reinforced composite based on it under cyclic thermomechanical loading. The goal is to model and explain the experimentally observed stress state formation, in...
of 30