Skip to Content
You are currently on the new version of our website. Access the old version .

3,588 Results Found

  • Article
  • Open Access
3 Citations
3,642 Views
23 Pages

3 February 2023

During the first filling, the reservoir is gradually raised in multiple stages. At each stage, the filling is paused to allow adequate time for monitoring and evaluating the performance of the dam and its foundation. The analysis of the monitored beh...

(This article belongs to the Section Structural and Earthquake Engineering)
  • Article
  • Open Access
3 Citations
2,099 Views
30 Pages

13 February 2023

The concrete shear walls of masonry structures with RC frames on the first story are low-rise shear walls with a height–width ratio of less than 1. The strength, stiffness, and ductility of these low-rise shear walls are not matched, resulting...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
6 Citations
3,350 Views
11 Pages

Regional Epidemiological Study on the Dental Status of the First Permanent Molar in Romanian Schoolchildren

  • Liana Beresescu,
  • Gabriela Felicia Beresescu,
  • Daniela Esian,
  • Alexandru Vlasa and ,
  • Csilla Benedek,
  • Raluca Sabau and
  • Alexandra Mihaela Stoica
  • + 2 authors+ 0 author

10 January 2025

Background/Objectives: Dental caries remains a significant public health challenge in Romania, with recent studies reporting a prevalence of 40% in children’s permanent teeth, with 90% of cases untreated. This study aimed to evaluate the dental...

(This article belongs to the Special Issue Oral Health Care in Paediatric Dentistry Volume 2)
  • Article
  • Open Access
4 Citations
1,341 Views
18 Pages

28 October 2025

This study presents a comprehensive first-principles investigation into the gas adsorption and sensing characteristics of Pd-doped MoSe2, WSe2, and MoSe2-WSe2 systems for dissolved gas analysis applications in oil-filled transformers. Through theoret...

  • Article
  • Open Access
4 Citations
3,263 Views
25 Pages

22 April 2023

Most of the larger hydropower plants in Western Europe, the former Soviet Union, North America and Japan were constructed between the 1940s and 1970s. This implies that the rehabilitation or repair of existing dams is a top priority, which entails ne...

(This article belongs to the Special Issue Advances in Structural Analysis and Rehabilitation for Existing Structures)
  • Article
  • Open Access
2 Citations
4,292 Views
11 Pages

25 February 2020

After Francisco Franco’s death, the process of democratisation of public institutions was a key factor in the evolution of the architectural profession in Spain. The approval of the creation of neighbourhood associations, the first municipal go...

(This article belongs to the Special Issue Becoming a Gender Equity Democracy: Women and Architecture Practice in Spain and Portugal (1960s–1980s))
  • Article
  • Open Access
14 Citations
3,702 Views
14 Pages

Strata Movement of the Thick Loose Layer under Strip-Filling Mining Method: A Case Study

  • Qingliang Chang,
  • Xingjie Yao,
  • Qiang Leng,
  • Hao Cheng and ,
  • Fengfeng Wu,
  • Huaqiang Zhou and
  • Yuantian Sun
  • + 2 authors+ 0 author

9 December 2021

Filling mining plays an important role in controlling surface subsidence. To study the movement of overburdened rock in filling mining under thick loose layers, a numerical simulation combing field measurement in CT30101 working face in the Mahuangli...

(This article belongs to the Section Earth Sciences)
  • Article
  • Open Access
31 Citations
15,453 Views
20 Pages

A Fast Hole-Filling Method for Triangular Mesh in Additive Repair

  • Chao Feng,
  • Jin Liang,
  • Maodong Ren,
  • Gen Qiao and ,
  • Wang Lu and
  • Shifan Liu
  • + 1 author+ 0 author

2 February 2020

In the triangular meshes obtained in additive repair, it is a challenge to find one single hole-filling method to close all holes and make the filling patches assort with surrounding meshes well with low time complexity, which is mainly caused by the...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
2 Citations
1,103 Views
22 Pages

Experimental Investigation and Numerical Simulation of Freeze–Thaw Damage Behavior in Coal Gangue Concrete Used in High-Altitude Cold Western Mines

  • Guojun Gao,
  • Jiaxin Cui,
  • Mingtao Gao,
  • Zhenhua Hu and ,
  • Chengyang Guo,
  • Donglin Fan,
  • Minhui Li and
  • Zihao Guo
  • + 3 authors+ 0 author

11 November 2025

Coal gangue concrete in high, cold mines in western China is subject to freeze–thaw damage due to prolonged low temperatures and large temperature variations, leading to surface spalling, cracking, and degradation of mechanical performance. In...

(This article belongs to the Special Issue Process Safety and Monitoring of Intelligent and Green Mining Technology (2nd Edition))
  • Article
  • Open Access
49 Citations
9,332 Views
18 Pages

4 May 2021

During the fast-filling of a high-pressure hydrogen tank, the temperature of hydrogen would rise significantly and may lead to failure of the tank. In addition, the temperature rise also reduces hydrogen density in the tank, which causes mass decreme...

(This article belongs to the Special Issue Diversified Technologies Based on Hydrogen Energy: Mechanical, Thermal, Chemical, Biological, and/or Electrochemical Processes)
  • Article
  • Open Access
7 Citations
3,934 Views
19 Pages

4 September 2021

Common methods of filling open holes first reaggregate them into closed holes and then use a closed hole filling method to repair them. These methods have problems such as long calculation times, high memory consumption, and difficulties in filling l...

(This article belongs to the Section Engineering Remote Sensing)
  • Article
  • Open Access
726 Views
33 Pages

Design and Evaluation of a Dual-Chamber Pre-Cut Cassava Stem Filling Mechanism for Precision Planting

  • Lintao Chen,
  • Jun Wang,
  • Elsayed M. Atwa,
  • Xiangwei Mou and ,
  • Hamidreza Rahmanian,
  • Xu Ma and
  • Jinming Pan
  • + 2 authors+ 0 author

To address the issues of poor seed filling efficiency, low qualified seeding index, and high missed-seeding index in cassava precision planters, this study developed a dual-chamber pre-cut cassava stem filling mechanism. The structure and working pri...

  • Article
  • Open Access
3 Citations
3,191 Views
14 Pages

5 August 2022

The quality of the filling algorithm in additive manufacturing directly affects the strength of the part. The commonly used 3D printing filling algorithm at this stage is the classic filling algorithm. The density of each part in the filling region i...

  • Review
  • Open Access
4 Citations
3,801 Views
25 Pages

Advances in Powder-Filled Mold Processes: A Comprehensive Review and Outlook

  • Pengyu Bai,
  • Shuhua Yang,
  • Yalin Yan,
  • Dongliang Wang and
  • Yanwei Ma

9 November 2024

Powder molding technology is a versatile process widely used in the pharmaceutical, ceramic, chemical, food, and powder metallurgy industries. The powder-filling mold process is a key link in powder compression molding, and the uniformity and consist...

(This article belongs to the Special Issue Feature Papers in Materials Physics (2nd Edition))
  • Article
  • Open Access
13 Citations
4,112 Views
17 Pages

24 February 2020

The paper reports the results on first-principles investigation of energy band spectrum and optical properties of bulk and nanoporous silicon. We present the evolution of energy band-gap, refractive indices and extinction coefficients going from the...

(This article belongs to the Section Nanophotonics Materials and Devices)
  • Article
  • Open Access
7 Citations
2,918 Views
14 Pages

Solvation of Large Polycyclic Aromatic Hydrocarbons in Helium: Cationic and Anionic Hexabenzocoronene

  • Miriam Kappe,
  • Florent Calvo,
  • Johannes Schöntag,
  • Holger F. Bettinger and ,
  • Serge Krasnokutski,
  • Martin Kuhn,
  • Elisabeth Gruber,
  • Fabio Zappa,
  • Paul Scheier and
  • Olof Echt
  • + 5 authors+ 0 author

10 October 2022

The adsorption of helium on charged hexabenzocoronene (Hbc, C42H18), a planar polycyclic aromatic hydrocarbon (PAH) molecule of D6h symmetry, was investigated by a combination of high-resolution mass spectrometry and classical and quantum computation...

(This article belongs to the Section Physical Chemistry)
  • Article
  • Open Access
6 Citations
2,401 Views
14 Pages

Micro-Mechanism of Uniaxial Compression Damage of Layered Cemented Backfill in Underground Mine

  • Xinming Chen,
  • Haowen Zhang,
  • Yuping Wu,
  • Huazhe Jiao and ,
  • Liuhua Yang,
  • Qinting Wang and
  • Wenxiang Zhang
  • + 2 authors+ 0 author

12 July 2022

Layering of filling body is common in large-scale filling areas. In this paper, the cement–sand ratio of 1:8 is based on the configuration of 68%, 70%, 72% and 74%; four concentrations; and filling layers of one-, two-, three- and four-layered...

(This article belongs to the Special Issue Mechanical and Modeling of Composite Materials)
  • Article
  • Open Access
4 Citations
1,438 Views
18 Pages

21 February 2025

To investigate the dynamic characteristics, energy dissipation patterns, and failure modes of granite with filled joints of varying thicknesses under impact loading, we utilized the Split Hopkinson Pressure Bar (SHPB) test setup for impact tests on b...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
4 Citations
2,494 Views
9 Pages

Assessment of Corneal Angiography Filling Patterns in Corneal Neovascularization

  • Luca Pagano,
  • Haider Shah,
  • Kunal Gadhvi,
  • Mohammad Ahmad and ,
  • Nardine Menassa,
  • Giulia Coco,
  • Stephen Kaye and
  • Vito Romano
  • + 3 authors+ 0 author

12 January 2023

The purpose of the paper is to describe vascular filling patterns in corneal neovascularization (CoNV) and evaluate the effect of corneal lesion location, CoNV surface area and multi-quadrant CoNV involvement on the filling pattern. It is a retrospec...

(This article belongs to the Special Issue Imaging in Ophthalmology—Volume I)
  • Article
  • Open Access
16 Citations
3,417 Views
16 Pages

Tensile Characteristics and Fracture Mode of Frozen Fractured Rock Mass Based on Brazilian Splitting Test

  • Tingting Wang,
  • Pingfeng Li,
  • Chun’an Tang,
  • Bingbing Zhang and ,
  • Jiang Yu and
  • Tao Geng
  • + 1 author+ 0 author

20 November 2022

Frozen fractured rock mass is often encountered during the implementation of geotechnical engineering in cold regions. The tensile strength parameters of frozen rock play an important role in the construction of rock slopes involving tensile failure....

(This article belongs to the Special Issue Experimental Investigation and Numerical Modeling of Rock Brittle Failure Behavior under High Stress Conditions)
  • Article
  • Open Access
2 Citations
2,686 Views
14 Pages

25 June 2023

Our research group prepared a new filling paste consisting of steel slag–oil shale residue and no admixtures. It was used as the research object to explore the combined effect of chloride and dry–wet cycling-driven erosion on the long-ter...

  • Article
  • Open Access
5 Citations
2,856 Views
14 Pages

Polydimethylsiloxane Elastomers Filled with Rod-Like α-MnO2 Nanoparticles: An Interplay of Structure and Electrorheological Performance

  • Alexander V. Agafonov,
  • Anton S. Kraev,
  • Anastasia A. Egorova,
  • Alexander E. Baranchikov and ,
  • Sergey A. Kozyukhin and
  • Vladimir K. Ivanov
  • + 1 author+ 0 author

27 November 2020

For the first time, electroactive nanocomposite elastomers based on polydimethylsiloxane and filled with rod-like α-MnO2 nanoparticles have been obtained. The curing of the filled elastomer in an electric field, resulting in the ordering of the...

(This article belongs to the Special Issue Polymer-Inorganic Composites for Special Applications)
  • Article
  • Open Access
6 Citations
3,479 Views
15 Pages

Studies on the Pressure Buildup and Shear Flow Factors in the Cavitation Regime

  • Michael Müller,
  • Lukas Stahl and
  • Georg-Peter Ostermeyer

Modeling tribological contacts is commonly based on the Reynolds equation. This study discusses the validity of conventional, averaged Reynolds simulations for systems including starvation regimes. Two fundamental assumptions that are used as common...

  • Article
  • Open Access
3,096 Views
15 Pages

Modification Tests to Optimize Highway Construction in Crown of Slate Random Embankments with Compaction Quality Control

  • Evelio Teijón-López-Zuazo,
  • Ángel Vega-Zamanillo,
  • Miguel Ángel Calzada-Pérez and
  • Luis Damián Ramos-Pereira

4 March 2020

The compaction control of random fills has developed very little due to the limitations of particle sizes, with methods usually using a simple procedural control. In order to develop new quality control procedures for random slate filling, the necess...

  • Article
  • Open Access
5 Citations
3,026 Views
20 Pages

19 December 2023

Post-construction settlement in embankments is a crucial quality indicator and a significant factor influencing the long-term stability of roadbeds. Especially for the mixed-fill materials, by considering the uncertainty of composition and mechanical...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
20 Citations
3,666 Views
24 Pages

Study on the Partial Paste Backfill Mining Method in a Fully Mechanized Top-Coal Caving Face: Case Study from a Coal Mine, China

  • Zhaowen Du,
  • Deyou Chen,
  • Xuelong Li,
  • Yong Jian and ,
  • Weizhao Zhang,
  • Dingding Zhang and
  • Yongfeng Tian
  • + 2 authors+ 0 author

22 May 2024

Paste backfill mining is an significant part of green coal mining, which can improve resource utilization and extend the service life of mines. It is important for solving the “three under, one above” mining problem and avoiding industria...

(This article belongs to the Special Issue Sustainability in the Mechanism and Prevention of Coal-Rock Dynamic Disaster and Rock Engineering)
  • Article
  • Open Access
21 Citations
4,018 Views
19 Pages

Stress Wave Propagation through Rock Joints Filled with Viscoelastic Medium Considering Different Water Contents

  • Xiaolin Huang,
  • Shengwen Qi,
  • Bowen Zheng,
  • Youshan Liu and ,
  • Lei Xue and
  • Ning Liang
  • + 1 author+ 0 author

13 July 2020

A rock mass often contains joints filled with a viscoelastic medium of which seismic response is significant to geophysical exploration and seismic engineering design. Using the propagator matrix method, an analytical model was established to charact...

(This article belongs to the Special Issue Computational Methods in Vibration Problems and Wave Mechanics)
  • Article
  • Open Access
9 Citations
3,108 Views
15 Pages

Influence of Factors in the Photopolymerization Process on Dental Composites Microhardness

  • Jordan Maximov,
  • Tsanka Dikova,
  • Galya Duncheva and
  • Georgi Georgiev

17 September 2022

The aim of the present paper is to investigate the influence of factors in photopolymerization process that govern microhardness of three types of dental composites—universal (UC), bulk-fill (BC), and flowable (FC). Cylindrical specimens with d...

(This article belongs to the Special Issue Advanced Materials for Oral Application (Volume II))
  • Review
  • Open Access
13 Citations
3,987 Views
23 Pages

12 January 2023

This review discusses the phemenology of filling, the investigation of kinetics, and the electronic properties for applications of filled single-walled carbon nanotubes (SWCNTs), and summarizes five main achievements that were obtained in processing...

(This article belongs to the Section 2D and Carbon Nanomaterials)
  • Article
  • Open Access
1,021 Views
17 Pages

Impact Hazard of Strip Filling Mining in Upward Mining Faces

  • Xuewei Zhang,
  • Weiming Guan,
  • Lingjin Huang,
  • Jinwen Bai and ,
  • Hongchao Zhao,
  • Haosen Wang,
  • Guandong Wu and
  • Meng Xie
  • + 3 authors+ 0 author

12 October 2025

Coal resources serve as a fundamental pillar for global economic development and remain the dominant energy source in China. To improve coal resource utilization and assess the impact hazards related to strip filling mining, this study selects the No...

  • Article
  • Open Access
6 Citations
4,080 Views
14 Pages

14 December 2019

Based on the principle of operating an oil-filled-cable operation and the explanation of the oil-filling process provided in the cable operation and maintenance manual of submarine cables, this study investigated oil-pressure variation caused by gas...

(This article belongs to the Section A1: Smart Grids and Microgrids)
  • Article
  • Open Access
4,498 Views
15 Pages

Filling dot maps with a regular pattern is a key step in visual representation of land use data. The traditional methods cannot adapt well to shape features of complex areas, leading to an unreasonable symbol arrangement in the inner region and area...

  • Article
  • Open Access
1 Citations
1,697 Views
12 Pages

Eco-Friendly Mining Practices: Field Test of Phosphogypsum Filling Based on Slag Powder in Dayukou Phosphate Mine

  • Houdong Liu,
  • Qian Kang,
  • Yuxian Ke,
  • Yi Zou and ,
  • Qi Liu and
  • Zhongwei Wang
  • + 1 author+ 0 author

24 March 2025

Filling with phosphogypsum is one of the important ways to realize the sustainability development of phosphate mines. This study is based on the extensive on-site experiments conducted at the Dayukou phosphate mine. Over a period of 60 days, differen...

  • Article
  • Open Access
12 Citations
3,391 Views
15 Pages

Effect of Filling Rate on Underwater Wet Welding Process and Weld Appearance

  • Xin Zhang,
  • Ning Guo,
  • Changsheng Xu,
  • Haoran Kan and ,
  • Yanbo Tan and
  • Hao Chen
  • + 1 author+ 0 author

27 February 2020

Real-time electric signal, matter transfer mode and welding pool behavior were obtained to investigate the effect of wires’ filling rate on arc stability and joints’ appearance during underwater wet flux-cored arc welding (FCAW). The elec...

(This article belongs to the Collection Welding and Joining Processes of Materials)
  • Article
  • Open Access
6 Citations
2,004 Views
25 Pages

20 August 2025

Background: This study aimed to compare the stress distribution and fracture resistance of dental tissues and restorative materials with varying adhesive layer thicknesses and different restorative materials. Methods: A caries-free mandibular first m...

(This article belongs to the Special Issue Biomaterials for Restorative Dentistry)
  • Article
  • Open Access
5 Citations
2,127 Views
13 Pages

31 March 2023

Backfill is a very important technology that can be used to reduce the environmental footprints resulting from coal mining. The selection of proper filling materials is of great significance to the operation cost and the stability of the goaf. This p...

  • Review
  • Open Access
57 Citations
5,222 Views
12 Pages

20 March 2022

Backfill mining is the only way to realize no-waste mining and create green mines, but complicated backfill mining technology, high mining costs, and low-production capacity greatly restrict its application in low-quality iron mines. To reduce the co...

(This article belongs to the Special Issue Geopolymer Gels for Next-Generation Construction)
  • Article
  • Open Access
1 Citations
1,443 Views
21 Pages

Pressure Transient Analysis for Vertical Well Drilled in Filled-Cave in Fractured Reservoirs

  • Wenyang Shi,
  • Gerui Wang,
  • Shaokai Rong,
  • Jiazheng Qin and ,
  • Juan Chen,
  • Lei Tao,
  • Jiajia Bai,
  • Zhengxiao Xu and
  • Qingjie Zhu
  • + 4 authors+ 0 author

5 December 2025

For capturing dynamic information about a filled-cave in the fractured reservoir, a novel Pressure Transient Analysis (PTA) analytical model for a well located at the filled-cave is established. In this new model, we consider the stress-sensitivity o...

  • Article
  • Open Access
2 Citations
2,167 Views
19 Pages

Experimental Study of the Mechanical Properties of a Flexible Grid Filling Body

  • Xiaosheng Liu,
  • Weijun Wang,
  • Hai Wu,
  • Jiaren Chen and ,
  • Xuan Zhang and
  • Liming Zhang
  • + 1 author+ 0 author

9 May 2023

The fill mining method has become more widely used due to its advantages of a high resource recovery rate, reliability and safety, and reduced surface tailings storage. However, the mechanical properties of the cemented fillings in fill mining are si...

(This article belongs to the Special Issue Advanced Underground Coal Mining and Ground Control Technology)
  • Article
  • Open Access
8 Citations
2,351 Views
12 Pages

Study on Slump and Compressive Strength of Gangue Based on Aggregate Size Gradation

  • Yue Pan,
  • Hao Yuan,
  • Shengyu Zhai,
  • Zhongcheng Geng and
  • Fulin Huo

16 May 2024

In order to solve the ecological environment pollution caused by a large amount of coal gangue accumulation and the problems of poor conveying performance and low support strength of paste filling materials. Based on the standard slump test and uniax...

  • Article
  • Open Access
15 Citations
5,479 Views
21 Pages

8 June 2021

As a common form of light detection and ranging (LiDAR) in forestry applications, the canopy height model (CHM) provides the elevation distribution of aboveground vegetation. A CHM is traditionally generated by interpolating all the first LiDAR echoe...

(This article belongs to the Section Remote Sensing Image Processing)
  • Article
  • Open Access
3 Citations
2,646 Views
15 Pages

24 November 2021

Different from the traditional concrete mixing procedure, the innovative post-filling coarse aggregate concrete (PFCC) reduces the cost of pumping concrete by increasing the coarse aggregate content and reducing the usage of cement. Previous studies...

(This article belongs to the Topic Sustainable Building Structures)
  • Article
  • Open Access
7 Citations
3,118 Views
18 Pages

16 October 2022

In the present work, a filling and laser shock peening (LSP) method is put forward and applied to a thin-walled pipe. Specimens were experimentally and numerically investigated to identify the residual stress field and fatigue properties of a pipe wi...

  • Article
  • Open Access
9 Citations
2,929 Views
22 Pages

7 September 2024

This paper investigated the fluid–structure interaction vibration response of an aircraft liquid-filled pipeline under external random vibration and internal pulsating pressure. First, the fluid–structure interaction solution is theoretic...

(This article belongs to the Special Issue Aerotech, Aerospace and Security Applications in the Age of Artificial Intelligence Support for Industry 4.0 and Green Technology)
  • Article
  • Open Access
15 Citations
10,243 Views
16 Pages

A Study on the Thermomechanical Reliability Risks of Through-Silicon-Vias in Sensor Applications

  • Shuai Shao,
  • Dapeng Liu,
  • Yuling Niu,
  • Kathy O’Donnell and ,
  • Dipak Sengupta and
  • Seungbae Park
  • + 1 author+ 0 author

9 February 2017

Reliability risks for two different types of through-silicon-vias (TSVs) are discussed in this paper. The first is a partially-filled copper TSV, if which the copper layer covers the side walls and bottom. A polymer is used to fill the rest of the ca...

(This article belongs to the Collection Modeling, Testing and Reliability Issues in MEMS Engineering)
  • Article
  • Open Access
18 Citations
4,055 Views
20 Pages

29 December 2023

This study prepares composite panels with three Polylactic acid (PLA)-based materials via the multi-material fused filament fabrication method. The influences of four processing parameters on the mechanical properties of 3D-printed samples are invest...

(This article belongs to the Special Issue Additive Manufacturing of Fibre Reinforced Polymer Composites)
  • Article
  • Open Access
2 Citations
1,366 Views
13 Pages

16 January 2025

This study analyzed the influence of the mechanical properties of two-step backfill on the stability of mining sites. The study focused on the one-step adhesive backfill of segmented backfill mining in a mine in Shandong Province, where the front wal...

(This article belongs to the Section F: Engineering and Materials)
  • Article
  • Open Access
4 Citations
2,750 Views
20 Pages

18 April 2023

The visco-damper is a crucial engine accessory from an operation- as well as vehicle-safety point of view. The service life of this damping product is determined by the degradation of the silicone oil applied to it. The thermal and mechanical degrada...

(This article belongs to the Section Vehicle Engineering)
  • Article
  • Open Access
20 Citations
4,015 Views
24 Pages

4 December 2020

Five machine learning (ML) algorithms were employed for gap-filling surface fluxes of CO2, water vapor, and sensible heat above three different ecosystems: grassland, rice paddy field, and forest. The performance and limitations of these ML models, w...

(This article belongs to the Section Hydrology)

of 72