- Article
The “all-on-four” concept is a prominent solution for rehabilitating edentulous patients with fixed full-arch restorations. This study aimed to examine the stress distribution pattern, material fatigue, and restoration displacement using...
The “all-on-four” concept is a prominent solution for rehabilitating edentulous patients with fixed full-arch restorations. This study aimed to examine the stress distribution pattern, material fatigue, and restoration displacement using...
This study was performed as an adjunct to an existing clinical study to validate the effect of veneer: framework thickness ratio on stress distribution in an implant-supported all-ceramic fixed partial denture. Two commercially available titanium den...
The long-term success of implant-supported prostheses (ISPs) is strongly influenced by material selection, which affects stress distribution within the implant system and surrounding cortical bone. This study aimed to assess the biomechanical behavio...
In order to simulate the fracture process of particle-reinforced materials on the micro-scale, an image-based double-smoothing cohesive finite element framework is proposed in the present paper. Two separate smoothing processes are performed to reduc...
In this paper, we present a comprehensive framework for the simulation of Multifluid flows based on the implicit level-set representation of interfaces and on an efficient solving strategy of the Navier-Stokes equations. The mathematical framework re...
This study evaluated the effects of misfit type, magnitude, and location on the stress distribution in full-arch screw-retained implant frameworks. A maxillary finite element model with four implants was analyzed under 16 scenarios, characterized by...
Seismoelectric responses generated in fluid-saturated porous media contain indirect geophysical information related to subsurface interfaces, material contrasts, and electrokinetic coupling. Many three-dimensional simulations adopt a quasi-static ele...
In resin impregnation processes for composite manufacturing, proper infusion of the preform is essential to achieve optimal component quality. Manufacturing-induced defects, such as voids, are commonly present in the final product; however, minimizin...
The groove curvature coefficient plays a critical role in determining the thermo-mechanical performance of angular-contact ball bearings. However, its optimization remains challenging due to strong nonlinear coupling among stress, stiffness, heat gen...
This paper establishes a multi-scale nested sub-modeling finite element simulation framework for the deformation and damage analysis of large-scale structures under complex loading conditions. By sequentially transferring displacement solutions from...
Assessing the contribution of electrokinetic effects to seismic electromagnetic signals requires forward methods capable of simulating coupled responses in anisotropic formations and complex geological models. We extend a three-dimensional hybrid spe...
The functionality of buried metallic pipelines can be compromised by the electrical lines that share the same right-of-way. Given the considerable size of shared corridors, computer simulation is an important tool for performing risk assessment and m...
Reliable and high-fidelity virtual ruin scenarios for collapsed buildings are essential for post-earthquake emergency search and rescue training. However, the existing research on the distribution of ruins caused by building collapse is insufficient...
This paper assesses the feasibility of performing topology optimization of laminar incompressible flows governed by the steady-state Navier–Stokes equations using anisotropic mesh adaptation to achieve a high-fidelity description of all fluid&n...
Finite element (FE) analysis that incorporates structural damages extracted using computer vision (CV) methods based on three-dimensional point-cloud data (PCD) is effective for evaluating the residual capacity of structures. In this study, observabl...
In the present study, a three-dimensional finite element framework has been developed to model a full-scale multilaminate composite helicopter rotor blade. Tip deformation and stress behavior have been analyzed for external aerodynamic loading condit...
Polymers have become indispensable in many engineering applications because of their attractive properties, including low volumetric mass density and excellent resistance to corrosion. However, polymers typically lack in mechanical, thermal, and elec...
Rainfall is one of the major causes of geological hazards such as landslides and slope failures because it decreases shear strength along the failure surface and increases the driving force of the sliding mass due to the movement of the wetting front...
Background and Objectives: This study uses finite element analysis to evaluate the impact of abutment angulation, types, and framework materials on the stress distribution and fatigue performance of dental implant systems. Materials and Methods: Thre...
Finite element musculoskeletal (FEMS) approaches using concurrent musculoskeletal and finite element models driven by motion data such as marker-based motion trajectory can provide insight into the interactions between the knee joint secondary kinema...
Computer-based simulations are nowadays widely exploited for the prediction of the mechanical behavior of different biomedical devices. In this aspect, structural finite element analyses (FEA) are currently the preferred computational tool to evaluat...
Properties such as low specific gravity and cost make polymers attractive for many engineering applications, yet their mechanical, thermal, and electrical properties are typically inferior compared to other engineering materials. Material designers h...
Pneumatic soft actuators have been drawing considerable attention in the field of soft robotics, thanks to their inherent flexibility, high power density, and safe interaction. However, the strong, intricate coupling between the material’s hype...
This paper investigates the low-cycle behaviour of Concrete-Filled steel Tubes (CFTs) subjected to cyclic pure bending, a loading condition representative of large bridge and building girders. A 3D finite element model is developed in Abaqus/Explicit...
Modeling choice is key to modal analysis of rib-reinforced vibration test fixtures; however, systematic criteria for selecting shell or solid finite element (FE) models remain limited. This study proposes a decision framework that translates comparis...
The design of steel connections presents considerable complexity due to their inherently nonlinear behavior, cost constraints, and the necessity to comply with structural design codes. These factors highlight the need for advanced computational algor...
The design of cushioning packaging for flat-screen television (TV) products relies heavily on repeated simulations, resulting in high development costs and low design efficiency. In this study, we propose a hybrid framework integrating finite element...
Three-piece alloy wheels are widely used across the automotive industry, favoured due to their lightweight construction and ease of customisation. Vehicle wheels must withstand forces generated during acceleration, braking, cornering, and impacts, en...
This study aims to investigate the bond behavior at earthen mortar–brick interfaces in historic masonry structures. To that end, a series of combined compression–shear tests were conducted to systematically assess the influence of varying...
Finite element analysis (FEA) is common in biomedical engineering for combining design and material development, with model validation crucial for accurate prediction of material behavior. Simplified geometries are commonly needed in stent developmen...
Blast-induced ground vibration is traditionally predicted using empirical scaled-distance equations or numerical simulations driven by simplified analytical loading functions. Although dynamic finite element modeling has significantly advanced the un...
Additive Manufacturing (AM) has emerged as a transformative technology for rapid prototyping and fabrication of geometrically complex structures. However, the inherent thermal cycling and rapid solidification in processes such as Selective Laser Sint...
This study addresses the lack of integrated methodologies for qualifying additively manufactured polymer lifting attachments for UAV cargo operations under the EASA Specific category. A Design–Verify–Validate framework was developed to co...
Titanium alloys such as Ti-6Al-4V are widely used in orthopedic implants due to their strength and biocompatibility. Laser Surface Remelting (LSR) offers a promising approach to modify surface properties without altering bulk characteristics. This st...
The present study intends to assess the ratcheting response of SA508 and SA333 steel alloys subjected to asymmetric loading cycles at various operating temperatures of 298, 573, and 623K through a hardening framework developed by Ahmadzadeh–Var...
Accurate representation of structural geometry, physical properties, and boundary conditions remains a major challenge in the finite element (FE) modeling of jacket structures. To address these difficulties, this study proposes a multi-source data sy...
Background: Hip implant fractures are rare, yet difficult to correct once they occur. For cemented implants, fracture is often associated with increased stresses at the implant stem when proximal regions of the implant have debonded. While determinis...
Ultra-deep dolomite formations exhibit pronounced mechanical heterogeneity governed by mineral composition, inter-particle cementation, and observation scale, complicating their mechanical characterization. Because intact downhole cores are difficult...
Laminated carbon fiber reinforced polymer (CFRP) beams are widely used in lightweight structures, yet their vibration response depends strongly on laminate architecture, boundary conditions, thickness, and material anisotropy. Previous studies often...
To improve the efficiency of comparative process-window screening in selective laser melting (SLM), this study developed a finite element simulation-driven machine learning framework for 316L stainless steel. A simulation dataset covering laser power...
The present study aims to investigate the interaction of ratcheting and fatigue phenomena for additively manufactured (AM) samples of SS304L and AlSi10Mg undergoing uniaxial asymmetric stress cycles. Overall damage was accumulated through fatigue and...
In full-arch implant rehabilitations, when the anterior screw abutment channel compromises the aesthetic of the patient, the OT-Bridge system used with its Seeger rings may provide the necessary retention of the prosthesis. However, no studies have e...
This paper presents an optimization-based framework for active vibration control of rotor bearing systems using external surface-bonded piezoelectric patches. The rotor bearing system is modelled using the Finite Element Method (FEM), enabling the co...
The process-induced deformation (PID) during the manufacturing of thermosetting composite materials can significantly compromise manufacturing precision. This paper introduces an innovative method that combines a finite element analysis (FEA), featur...
By virtue of the advances in sensing techniques, finite element (FE) model updating (FEMU) using static and dynamic data has been recently employed to improve identification on updating parameters. Using heterogeneous data can provide useful informat...
Optimizing the design of Ceramic Composite Armor Systems (CCASs) is crucial for liberating redundant design space and enhancing ballistic performance. However, existing solution frameworks still exhibit deficiencies in handling multi-constrained opti...
Encapsulating enzymes in a tailored scaffold is of great potential in industrial enzymatic catalysis, which can enhance the stability of enzymes thus expanding their applications. Metal–organic frameworks (MOFs) are emerging as promising candid...
Geometrical non-linearity is one of the aspects to be taken into account for accurate analysis of fibre reinforced polymers (FRPs), since large displacements and rotations may be observed in many of its structural applications such as in aircraft win...
Orthotropic steel decks are widely used in the construction of steel bridges. Although there are many fatigue-evaluation methods stipulated by codes, unexpected fatigue cracks are still detected in some bridges. To justify whether the local finite el...
As a part of a damage tolerance assessment, the goal of this research is to estimate the two-dimensional crack propagation trajectory and its accompanying stress intensity factors (SIFs) using the adaptive finite element method. The adaptive finite e...
of 44