Skip to Content

152 Results Found

  • Article
  • Open Access
8 Citations
4,292 Views
18 Pages

Compensation for Electrode Detachment in Electrical Impedance Tomography with Wearable Textile Electrodes

  • Chang-Lin Hu,
  • Zong-Yan Lin,
  • Shu-Yun Hu,
  • I-Cheng Cheng and ,
  • Chih-Hsien Huang,
  • Yu-Hao Li,
  • Chien-Ju Li and
  • Chii-Wann Lin
  • + 3 authors+ 0 author

7 December 2022

Electrical impedance tomography (EIT) is a radiation-free and noninvasive medical image reconstruction technique in which a current is injected and the reflected voltage is received through electrodes. EIT electrodes require good connection with the...

(This article belongs to the Section Biomedical Sensors)
  • Article
  • Open Access
6 Citations
1,474 Views
17 Pages

18 April 2025

In the process of micro-EDM, tool electrode wear is inevitable, especially for complex three-dimensional cavities or microgroove structures. Tool electrode wear accumulates during machining, which will finally affect machining accuracy and machining...

(This article belongs to the Special Issue Emerging Micro Manufacturing Technologies and Applications, 3rd Edition)
  • Article
  • Open Access
106 Views
20 Pages

14 November 2026

Electrical resistance tomography (ERT) is an advanced visualization technique that is radiation-free, low-cost, and suitable for online measurements. However, its long-term reliability and accuracy are reduced by temporal and spatial variations in el...

(This article belongs to the Section Fault Diagnosis & Sensors)
  • Article
  • Open Access
6 Citations
4,097 Views
18 Pages

23 June 2020

In this study, for energy compensation in the whole-angle control of Hemispherical Resonator Gyro (HRG), the dynamical equation of the resonator, which is excited by parametric excitation of the discrete electrode, is established, the stability condi...

(This article belongs to the Section Electronic Sensors)
  • Article
  • Open Access
2 Citations
2,861 Views
13 Pages

18 September 2022

An electrical capacitance tomography (ECT) sensor is an array capacitive sensor that is sensitive to the medium of the measured object and can be widely used in oil, natural gas, machinery and other industrial fields to solve the problem of multiphas...

(This article belongs to the Section Computer Science & Engineering)
  • Article
  • Open Access
12 Citations
7,613 Views
25 Pages

Resistive High-Voltage Probe with Frequency Compensation by Planar Compensation Electrode Integrated in Printed Circuit Board Design

  • Jonas Winkelholz,
  • Moritz Hitzemann,
  • Alexander Nitschke,
  • Anne Zygmanowski and
  • Stefan Zimmermann

25 October 2022

Resistive voltage dividers tend to have a highly non-linear transfer function as parasitic and stray capacitances exert an increasing influence with increasing frequency. The non-linear transfer function depends on the topology and resistors used and...

(This article belongs to the Topic High Voltage Engineering)
  • Article
  • Open Access
121 Views
29 Pages

A Method for Pellet Feed Moisture Content Detection Based on Electrode Plate Structure Optimization and Temperature-Adaptive Compensation

  • Ziwen Bai,
  • Gang Zhang,
  • Dongbo Xie,
  • Xin Huang and ,
  • Yinhu Qiao,
  • Chunxia Jiang and
  • Kechuan Yi
  • + 2 authors+ 0 author

2 November 2026

Moisture content critically affects the stability, nutritional value, and shelf life of pellet feed during production and storage, yet conventional measurement methods are limited by slow response, poor accuracy, strong temperature sensitivity, and p...

(This article belongs to the Section Process Control, Modeling and Optimization)
  • Article
  • Open Access
3 Citations
2,386 Views
10 Pages

Fabrication of Micro-Ball Sockets in C17200 Beryllium Copper Alloy by Micro-Electrical Discharge Machining Milling

  • Shuliang Dong,
  • Hongchao Ji,
  • Jian Zhou,
  • Xianzhun Li and ,
  • Lan Ding and
  • Zhenlong Wang
  • + 1 author+ 0 author

29 December 2022

Micro-liquid floated gyroscopes are widely used in nuclear submarines, intercontinental missiles, and strategic bombers. The machining accuracy of micro-ball sockets determined the motion accuracy of the rotor. However, it was not easily fabricated b...

(This article belongs to the Special Issue Advances in Metal Cutting, Casting, Forming and Heat Treatment)
  • Proceeding Paper
  • Open Access
2,035 Views
5 Pages

Creep Compensation in an Electrostatic PDMS-Membrane Actuator with Flexible Silver Nanowire Electrodes

  • Stefan Schierle,
  • Nils Straub,
  • Peter Woias and
  • Frank Goldschmidtboeing

11 December 2018

An electrostatic membrane actuator with an elastomer membrane as movable part and silver nanowires (AgNWs) as flexible electrode material is built and characterized. A layered and modular actuator design facilitates simple and fast modification of ac...

(This article belongs to the Proceedings of EUROSENSORS 2018)
  • Article
  • Open Access
2,188 Views
16 Pages

2PP-Hydrogel Covered Electrodes to Compensate for Media Effects in the Determination of Biomass in a Capillary Wave Micro Bioreactor

  • Sven Meinen,
  • Steffen Brinkmann,
  • Kevin Viebrock,
  • Bassant Elbardisy and ,
  • Henning Menzel,
  • Rainer Krull and
  • Andreas Dietzel
  • + 2 authors+ 0 author

9 September 2024

Microbioreactors increase information output in biopharmaceutical screening applications because they can be operated in parallel without consuming large quantities of the pharmaceutical formulations being tested. A capillary wave microbioreactor (cw...

(This article belongs to the Section Nano- and Micro-Technologies in Biosensors)
  • Article
  • Open Access
28 Citations
18,039 Views
15 Pages

Development of Wearable Sheet-Type Shear Force Sensor and Measurement System that is Insusceptible to Temperature and Pressure

  • Shigeru Toyama,
  • Yasuhiro Tanaka,
  • Satoshi Shirogane,
  • Takashi Nakamura and ,
  • Tokio Umino,
  • Ryo Uehara,
  • Takuma Okamoto and
  • Hiroshi Igarashi
  • + 3 authors+ 0 author

31 July 2017

A sheet-type shear force sensor and a measurement system for the sensor were developed. The sensor has an original structure where a liquid electrolyte is filled in a space composed of two electrode-patterned polymer films and an elastic rubber ring....

(This article belongs to the Special Issue Flexible Electronics and Sensors)
  • Article
  • Open Access
8 Citations
5,314 Views
21 Pages

A Low-Cost pH Sensor for Real-Time Monitoring of Aquaculture Systems in a Multi-Layer Wireless Sensor Network

  • Binta Mohammed Adib Zeta,
  • Sifat U. Alam,
  • Gazi M. A. Ehsan Ur Rahman and
  • Khawza Iftekhar Uddin Ahmed

30 April 2025

For aquaculture systems, pH is the prime quality indicator and is highly related to other water quality indicators like ammonia and ammonium ions. The available pH sensors using chemical references are not suitable for continuous in situ monitoring o...

(This article belongs to the Section Sensors Development)
  • Review
  • Open Access
20 Citations
5,341 Views
14 Pages

Parasitic Effects on Electrical Bioimpedance Systems: Critical Review

  • David William Cordeiro Marcôndes,
  • Aleksander Sade Paterno and
  • Pedro Bertemes-Filho

11 November 2022

Parasitic capacitance represents the main error source in measurement systems based on electrical impedance spectroscopy. The capacitive nature of electrodes’ impedance in tetrapolar configuration can give origin to phase errors when electrodes...

(This article belongs to the Special Issue Sensing and Measurement Technologies in Healthcare, Medicine, and Biosciences)
  • Article
  • Open Access
6 Citations
2,429 Views
18 Pages

9 January 2024

Electrode roll forming involves rolling a battery electrode into a preset thickness using a hydraulic roll gap thickness automatic control system (hydraulic AGC for short). The pump-controlled AGC is a highly nonlinear servo system, which is a combin...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
6 Citations
2,947 Views
24 Pages

A Novel Electrode Front-End Face Design to Improve Geometric Accuracy in Electrical Discharge Machining Process

  • Shih-Ming Wang,
  • Jin-Kai Peng,
  • Hariyanto Gunawan,
  • Ren-Qi Tu and
  • Shean-Juinn Chiou

15 June 2023

Electrical discharge machining (EDM) is one of the important machining processes to produce mold components. When using the EDM process, surface quality, processing time, accuracy, and electrode cost must be considered. The electrode wear is the main...

  • Article
  • Open Access
1,037 Views
28 Pages

2 January 2026

As the core component in intelligent manufacturing systems, the precise control of the welding clamp’s electrode pressure plays a decisive role in ensuring the quality of spot welding. This paper proposes a novel pressure control strategy for r...

  • Article
  • Open Access
22 Citations
4,831 Views
13 Pages

Determining Particle Size and Position in a Coplanar Electrode Setup Using Measured Opacity for Microfluidic Cytometry

  • Douwe S. de Bruijn,
  • Koen F. A. Jorissen,
  • Wouter Olthuis and
  • Albert van den Berg

23 September 2021

Microfluidic impedance flow cytometers enable high-throughput, non-invasive, and label-free detection of single-cells. Cytometers with coplanar electrodes are easy and cheap to fabricate, but are sensitive to positional differences of passing particl...

(This article belongs to the Section Biosensor and Bioelectronic Devices)
  • Article
  • Open Access
20 Citations
5,030 Views
14 Pages

A Direct-Reading MEMS Conductivity Sensor with a Parallel-Symmetric Four-Electrode Configuration

  • Zhiwei Liao,
  • Junmin Jing,
  • Rui Gao,
  • Yuzhen Guo and ,
  • Bin Yao,
  • Huiyu Zhang,
  • Zhou Zhao,
  • Wenjun Zhang,
  • Yonghua Wang and
  • Chenyang Xue
  • + 6 authors+ 1 author

21 July 2022

This work proposes a design for a direct-reading conductivity sensor with a parallel symmetrical four-electrode structure, which integrates a silicon-based platinum thin-film strip electrode and a serpentine temperature compensation electrode. The op...

(This article belongs to the Special Issue Flexible and Wearable Sensors)
  • Article
  • Open Access
41 Citations
12,188 Views
16 Pages

A Novel Single-Excitation Capacitive Angular Position Sensor Design

  • Bo Hou,
  • Bin Zhou,
  • Mingliang Song,
  • Zhihui Lin and
  • Rong Zhang

29 July 2016

This paper presents a high-precision capacitive angular position sensor (CAPS). The CAPS is designed to be excited by a single voltage to eliminate the matching errors of multi-excitations, and it is mainly composed of excitation electrodes, coupling...

(This article belongs to the Special Issue Advanced Robotics and Mechatronics Devices)
  • Article
  • Open Access
2 Citations
4,402 Views
23 Pages

24 February 2023

An active electrode (AE) and back-end (BE) integrated system for enhanced electrocardiogram (ECG)/electrode-tissue impedance (ETI) measurement is proposed. The AE consists of a balanced current driver and a preamplifier. To increase the output impeda...

(This article belongs to the Special Issue Advanced CMOS Integrated Circuit Design and Application II)
  • Article
  • Open Access
305 Views
14 Pages

5 October 2026

Material removal rate and material removal per unit energy are key indicators for evaluating EDM efficiency. By studying the relationship between these indicators and EDM discharge parameters, it is possible to improve machining efficiency and materi...

(This article belongs to the Special Issue Magnetic Levitation and Actuators Integration: From Fundamental Research to Emerging Applications)
  • Article
  • Open Access
8 Citations
5,149 Views
11 Pages

Modeling of Structure Effect for Ferroelectric Capacitor Based on Poly(vinylidene fluoride-trifluoroethylene) Ultrathin Films

  • Long Li,
  • Xiuli Zhang,
  • Hongzhen Chen,
  • Xiaohui Sun and ,
  • Haidong Yuan and
  • Haisheng Xu
  • + 1 author+ 0 author

22 December 2017

The characteristics of ferroelectric capacitors with poly(vinylidene fluoride-trifluoroethlene) (P(VDF-TrFE)) films have been studied at different structures of cell electrodes. It is suggested that the effect of electrode structures could induce cha...

(This article belongs to the Special Issue Fluorinated Polymers)
  • Article
  • Open Access
2 Citations
1,865 Views
16 Pages

29 August 2023

Electrode roll-forming refers to rolling a battery electrode into a preset thickness through the electro-hydraulic servo pump-controlled hydraulic roll gap thickness automatic control system (known to as pump-controlled AGC). Compared with the motor...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
6 Citations
3,800 Views
17 Pages

14 October 2020

Micro-electro-discharge machining (μEDM) plays a significant role in miniaturization. Complex electrode manufacturing and a high wear ratio are bottlenecks for μEDM and seriously restrict the manufacturing of microcomponents. To solve the elect...

(This article belongs to the Special Issue Micro-Electro Discharge Machining: Principles, Recent Advancements and Applications)
  • Article
  • Open Access
5 Citations
3,036 Views
17 Pages

Enhancing the Reliability of NO2 Monitoring Using Low-Cost Sensors by Compensating for Temperature and Humidity Effects

  • Daniellys Alejo Sánchez,
  • Olivier Schalm,
  • Arianna Álvarez Cruz,
  • Erik Hernández Rodríguez and ,
  • Alain Martínez Laguardia,
  • David Kairuz Cabrera and
  • Mayra C. Morales Pérez
  • + 2 authors+ 0 author

13 November 2024

The study investigates methods to enhance the reliability of NO2 monitoring using low-cost electrochemical sensors to measure gaseous pollutants in air by addressing the impacts of temperature and relative humidity. The temperature within a plastic c...

(This article belongs to the Section Air Quality)
  • Article
  • Open Access
24 Citations
9,270 Views
14 Pages

12 September 2017

Molecular dynamics simulations are carried out to investigate the structure and capacitance of the electrical double layers (EDLs) at the interface of vertically oriented graphene and ionic liquids [EMIM]+/[BF4]−. The distribution and migration of th...

(This article belongs to the Special Issue Clean Energy and Fuel (Hydrogen) Storage)
  • Article
  • Open Access
8 Citations
2,440 Views
16 Pages

Temperature Compensation of SAW Winding Tension Sensor Based on PSO-LSSVM Algorithm

  • Yang Feng,
  • Wenbo Liu,
  • Haoda Yu,
  • Keyong Hu and ,
  • Shuifa Sun and
  • Ben Wang
  • + 1 author+ 0 author

12 November 2023

In this paper, a SAW winding tension sensor is designed and data fusion technology is used to improve its measurement accuracy. To design a high-measurement precision SAW winding tension sensor, the unbalanced split-electrode interdigital transducers...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
5 Citations
8,625 Views
8 Pages

11 July 2007

A flow-injection pulse amperometric method for determining tacrine, based onion transfer across a plasticized poly(vinyl chloride) (PVC) membrane, was developed. Afour-electrode potentiostat with ohmic drop compensation was used, while a flow-through...

  • Article
  • Open Access
10 Citations
10,909 Views
11 Pages

1 June 2008

A flow-injection coulometric method for the determination of chlorpromazine based on ion transfer into a plasticized poly(vinyl chloride) (PVC) membrane, was developed. The detector used consists of a flow-through cell that incorporates a plasticized...

  • Article
  • Open Access
7 Citations
5,631 Views
18 Pages

11 August 2018

In this paper, the performance of the electronic conventional image motion compensation (IMC) method based on the time delay integration (TDI) mode was analyzed using the optical injection formula of charge coupled devices (CCDs). The result shows th...

(This article belongs to the Special Issue Charge-Coupled Device (CCD) Sensors)
  • Article
  • Open Access
7 Citations
5,493 Views
16 Pages

Optimized Conditions for Electrical Tissue Stimulation with Biphasic, Charge-Balanced Impulses

  • Zhengwu Sun,
  • Payel Sen,
  • Jules Hamers,
  • Thomas Seidel and ,
  • Andreas Dendorfer and
  • Petra Kameritsch
  • + 1 author+ 0 author

The cultivation of excitable cells typically profits from continuous electrical stimulation, but electrochemical consequences are mostly harmful and must be minimized. The properties of the electrode materials and stimulation impulses are key. Here,...

(This article belongs to the Special Issue Electric, Magnetic, and Electromagnetic Fields in Biology and Medicine: From Mechanisms to Biomedical Applications: 2nd Edition)
  • Review
  • Open Access
124 Citations
14,766 Views
57 Pages

Recent Progress on Organic Electrodes Materials for Rechargeable Batteries and Supercapacitors

  • Alain Mauger,
  • Christian Julien,
  • Andrea Paolella,
  • Michel Armand and
  • Karim Zaghib

31 May 2019

Rechargeable batteries are essential elements for many applications, ranging from portable use up to electric vehicles. Among them, lithium-ion batteries have taken an increasing importance in the day life. However, they suffer of several limitations...

  • Article
  • Open Access
10 Citations
2,751 Views
11 Pages

Influence of the Hydrophilic Surface of Nanofiber Support on the Performance of Hybrid Supercapacitors

  • Hyo-Young Kim,
  • Seon-Yeong Lee,
  • In-Yup Jeon,
  • Jeeyoung Shin and
  • Young-Wan Ju

15 November 2021

Concerns associated with global warming and the depleting reserves of fossil fuels have highlighted the importance of high−performance energy storage systems (ESSs) for efficient energy usage. ESSs such as supercapacitors can contribute to improved p...

(This article belongs to the Section D1: Advanced Energy Materials)
  • Article
  • Open Access
11 Citations
7,569 Views
13 Pages

Tailored Pre-Lithiation Using Melt-Deposited Lithium Thin Films

  • Kay Schönherr,
  • Markus Pöthe,
  • Benjamin Schumm,
  • Holger Althues and ,
  • Christoph Leyens and
  • Stefan Kaskel
  • + 1 author+ 0 author

12 January 2023

The user demands lithium-ion batteries in mobile applications, and electric vehicles request steady improvement in terms of capacity and cycle life. This study shows one way to compensate for capacity losses due to SEI formation during the first cycl...

(This article belongs to the Special Issue Feature Papers to Celebrate the First Impact Factor of Batteries)
  • Article
  • Open Access
4 Citations
2,430 Views
13 Pages

Design of a Ka-Band Five-Bit MEMS Delay with a Coplanar Waveguide Loaded U-Shaped Slit

  • Yongxin Zhan,
  • Yu Chen,
  • Honglei Guo,
  • Qiannan Wu and
  • Mengwei Li

27 July 2023

This paper designs a five-bit microelectromechanical system (MEMS) time delay consisting of a single-pole six-throw (SP6T) RF switch and a coplanar waveguide (CPW) microstrip line. The focus is on the switch upper electrode design, power divider desi...

(This article belongs to the Special Issue Recent Advances in Electromagnetic Devices)
  • Article
  • Open Access
1,782 Views
13 Pages

3 October 2025

Battery technology plays an increasingly vital role in portable electronic devices, electric vehicles, and renewable energy storage. During operation, batteries undergo performance degradation, which not only reduces device efficiency, but may also p...

(This article belongs to the Special Issue State-of-Health Estimation of Batteries)
  • Review
  • Open Access
69 Citations
17,992 Views
55 Pages

Self-Healing Polymer Electrolytes for Next-Generation Lithium Batteries

  • Anja Marinow,
  • Zviadi Katcharava and
  • Wolfgang H. Binder

24 February 2023

The integration of polymer materials with self-healing features into advanced lithium batteries is a promising and attractive approach to mitigate degradation and, thus, improve the performance and reliability of batteries. Polymeric materials with a...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
11 Citations
3,147 Views
25 Pages

19 May 2023

Based on the principle of Contactless Conductivity Detection (CCD), a new contactless cross-correlation velocity measurement system with a three-electrode construction is developed in this work and applied to the contactless velocity measurement of g...

(This article belongs to the Special Issue Sensors and Signal Analysis for Dynamic Measurement in Industrial Process)
  • Article
  • Open Access
33 Citations
6,390 Views
15 Pages

13 September 2021

A SPEC/AuNPs/PMB modified electrode was prepared by electrodeposition and electro-polymerization. The electrochemical behavior of reduced nicotinamide adenine dinucleotide (NADH) on the surface of the modified electrode was studied by cyclic voltamme...

(This article belongs to the Special Issue Biosensors for Agriculture, Environment and Food)
  • Article
  • Open Access
5 Citations
3,950 Views
18 Pages

Investigation of Multi-Plane Scheme for Compensation of Fringe Effect of Electrical Resistance Tomography Sensor

  • Wenbin Tian,
  • Xiaofeng Liang,
  • Xiaolei Qu,
  • Jiangtao Sun and ,
  • Shuo Gao,
  • Lijun Xu and
  • Wuqiang Yang
  • + 2 authors+ 0 author

16 July 2019

Conventional electrical resistance tomography (ERT) sensors suffer from the fringe effect, i.e., severe distortion of the electric field on both ends of the measurement electrodes, leading to a 3D sensing region for a 2D sensor. As a result, the obje...

(This article belongs to the Special Issue Selected Papers from the 2018 IEEE International Conference on Imaging Systems and Techniques (IST 2018))
  • Communication
  • Open Access
7 Citations
4,062 Views
12 Pages

Charge Storage Properties of Nanostructured Poly (3,4–ethylenedioxythiophene) Electrodes Revealed by Advanced Electrogravimetry

  • Tao Lé,
  • David Aradilla,
  • Gérard Bidan,
  • Florence Billon and ,
  • Catherine Debiemme-Chouvy,
  • Hubert Perrot and
  • Ozlem Sel
  • + 2 authors+ 0 author

PEDOT nanowires (NWs) directly grown on the conducting electrode of quartz resonators enable an advanced electrogravimetric analysis of their charge storage behavior. Electrochemical quartz crystal microbalance (EQCM) and its coupling with electroche...

(This article belongs to the Special Issue Growth and Characterization in Nanowires)
  • Article
  • Open Access
3 Citations
1,819 Views
16 Pages

An Angle-Dependent Bias Compensation Method for Hemispherical Resonator Gyro Inertial Navigation Systems

  • Chao Liu,
  • Qixin Lou,
  • Ding Li,
  • Huiping Li and ,
  • Tian Lan,
  • Yutao Wu,
  • Hongjie Meng,
  • Jingyu Li,
  • Tao Xia and
  • Xudong Yu
  • + 5 authors+ 0 author

29 October 2025

In the whole-angle mode of a hemispherical resonator gyro (HRG), the external input rotation angle is obtained by detecting the standing-wave rotation angle through electrodes. Due to this operational principle and manufacturing constraints of HRGs,...

(This article belongs to the Section Navigation and Positioning)
  • Article
  • Open Access
9 Citations
10,244 Views
14 Pages

21 September 2015

This paper proposes using a liquid lens as a compensating lens and applying intermediate optics to achieve a 9× zoom ratio. The droplet shape and location of the liquid lens can be adjusted reversibly, enabling the focal length and position of the le...

(This article belongs to the Special Issue Selected Papers from the International Multi-Conference on Engineering and Technology Innovation 2015 (IMETI2015))
  • Review
  • Open Access
40 Citations
5,802 Views
18 Pages

1 February 2020

This review presents various ways of detection of different physical quantities based on the frequency change of oscillators using piezoelectric crystals. These are influenced by the reactance changes modifying their electrical characteristics. React...

(This article belongs to the Special Issue Piezoelectric Transducers)
  • Article
  • Open Access
17 Citations
4,992 Views
12 Pages

5 August 2022

To ensure that the performance of filters matches the continuous development in communication frequency bands, the influence of temperature on filter performance must be considered during the fabrication of filters. In this study, a cavity-type tempe...

(This article belongs to the Special Issue Functional Magnetic and Dielectric Composites: Fabrication, Properties and Applications)
  • Article
  • Open Access
15 Citations
6,152 Views
12 Pages

2 September 2019

Polymer-based micro-electrode arrays (MEAs) are gaining attention as an essential technology to understand brain connectivity and function in the field of neuroscience. However, polymer based MEAs may have several challenges such as difficulty in per...

  • Article
  • Open Access
35 Citations
6,532 Views
11 Pages

The Influence of Hydrogen on the Indications of the Electrochemical Carbon Monoxide Sensors

  • Małgorzata Majder-Łopatka,
  • Tomasz Węsierski,
  • Anna Dmochowska,
  • Zdzisław Salamonowicz and
  • Andrzej Polańczyk

18 December 2019

This article examines electrochemical carbon monoxide (CO) sensors used as mobile devices by rescue and firefighting units in Poland. The conducted research indicates that the presence of chlorine (Cl2), ammonia (NH3), hydrogen sulfide (H2S), hydroge...

(This article belongs to the Special Issue Green Technologies in Air Treatment)
  • Article
  • Open Access
1,226 Views
17 Pages

Research on Surface Acoustic Wave Yarn Tension Sensor for Spinning Machines: Structural Optimization, Sensitivity Enhancement and Temperature Compensation

  • Hao Chen,
  • Yang Feng,
  • Shuai Zhu,
  • Ben Wang and ,
  • Bingkun Zhang,
  • Hua Xia,
  • Xulehan Yu and
  • Wanqing Chen
  • + 3 authors+ 0 author

This paper presents a yarn tension sensor based on Surface Acoustic Waves (SAW). To enhance the detection accuracy of the sensor, an improved beam structure is designed for tension measurement, along with intelligent algorithms for temperature compen...

  • Article
  • Open Access
3 Citations
1,207 Views
19 Pages

Application of Direct Current Method and Seismic Wave Method in Advanced Detection of TBM Construction Tunnels

  • Kai Zhang,
  • Yuwen Zhang,
  • Shungang Zhou,
  • Wei Wang and ,
  • Bin Huang,
  • Guansen Zhai and
  • Zeshuai Qin
  • + 2 authors+ 0 author

5 September 2025

Over the past decade, the application of Tunnel Boring Machines (TBMs) in tunnel construction has increased significantly. During the construction process, numerous unfavorable geological structures, especially water-conducting structures, are encoun...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
3 Citations
2,969 Views
18 Pages

28 April 2023

In the realm of automatic wire-traction micromanipulation systems, the alignment of the central axis of the coil with the rotation axis of the rotary stage can be a challenge, which leads to the occurrence of eccentricity during rotation. The wire-tr...

(This article belongs to the Section D: Materials and Processing)

of 4