Skip to Content

3,788 Results Found

  • Article
  • Open Access
7 Citations
5,286 Views
16 Pages

Tin Whiskers’ Behavior under Stress Load and the Mitigation Method for Immersion Tin Surface Finish

  • Nor Akmal Fadil,
  • Siti Zahira Yusof,
  • Tuty Asma Abu Bakar,
  • Habibah Ghazali and ,
  • Muhamad Azizi Mat Yajid,
  • Saliza Azlina Osman and
  • Ali Ourdjini
  • + 2 authors+ 0 author

11 November 2021

Since the use of the most stable Pb-based materials in the electronic industry has been banned due to human health concerns, numerous research studies have focused on Pb-free materials such as pure tin and its alloys for electronic applications. Pure...

(This article belongs to the Topic Metallurgical and Materials Engineering)
  • Article
  • Open Access
7 Citations
5,274 Views
12 Pages

25 October 2021

Tin was recovered in metal from an industrial tin-bearing byproduct containing Na2SO4 by carbothermic reduction smelting, and the effects of basicity (Na2O/SiO2), temperature, and reaction time on the recovery of tin were studied. Na2SO4 was reduced...

(This article belongs to the Special Issue Recovery of Valuable Metals from Industrial By-Products)
  • Article
  • Open Access
3 Citations
2,766 Views
12 Pages

18 November 2022

The tin could be volatilized and removed effectively from the tin-bearing iron concentrate while roasted in an atmosphere of SO2 and CO. The reduction of SO2 by CO occurred in preference to the SnO2 and Fe3O4, and the generated S2 could sulfurize the...

(This article belongs to the Special Issue Metal Recovery and Separation from Wastes)
  • Review
  • Open Access
34 Citations
9,088 Views
27 Pages

22 August 2023

For a very long period, tin was considered one of the most important metals for humans due to its easy access in nature and abundance of sources. In the past, tin was mainly used to make various utensils and weapons. Today, nanostructured tin and esp...

(This article belongs to the Special Issue Current Review in Nanofabrication and Nanomanufacturing)
  • Article
  • Open Access
5 Citations
6,278 Views
9 Pages

A new approach for the thermal reduction of tin dioxide (SnO2) in the carbon/sodium sulfite (Na2SO3) system is demonstrated. The process of tin smelting was experimentally optimized by adjusting the smelting temperature and amounts of the chemical co...

(This article belongs to the Special Issue Emerging Technologies in the Hydrometallurgical Recycling of Critical Metals)
  • Article
  • Open Access
6 Citations
2,120 Views
17 Pages

14 September 2023

In this study, determination of the inorganic and organic forms of tin in waters of different salinities is considered. The possibility of the separation of speciations of tin using liquid–liquid extraction (LLE); precipitation with fluorides,...

(This article belongs to the Special Issue Advances in Detection of Trace Elements by Analytical Spectroscopy)
  • Article
  • Open Access
27 Citations
8,280 Views
18 Pages

Tin, The Enabler—Hydrogen Diffusion into Ruthenium

  • Chidozie Onwudinanti,
  • Ionuţ Tranca,
  • Thomas Morgan and
  • Shuxia Tao

21 January 2019

Hydrogen interaction with ruthenium is of particular importance for the ruthenium-capped multilayer reflectors used in extreme ultraviolet (EUV) lithography. Hydrogen causes blistering, which leads to a loss of reflectivity. This problem is aggravate...

(This article belongs to the Special Issue Modeling of Complex Interfaces: From Surface Chemistry to Nano Chemistry)
  • Article
  • Open Access
8 Citations
4,605 Views
16 Pages

Interfacial Microstructure and Corrosion Behaviour of Mild Steel Coated with Alumina Nanoparticles Doped Tin Composite via Direct Tinning Route

  • Abdulaziz S. Alghamdi,
  • K. S. Abdel Halim,
  • Mohammed A. Amin,
  • Abdullah S. Alshammari and ,
  • Naglaa Fathy and
  • Mohamed Ramadan
  • + 1 author+ 0 author

29 October 2021

The improvement of the surface properties of ferrous metallic materials has become a crucial criterion for advanced engineering applications. The interfacial microstructure and corrosion behaviour of mild steel coated with alumina nanoparticles doped...

(This article belongs to the Special Issue Surface Modification and Coating of Metallic Materials: Microstructure, Tribology and Corrosion)
  • Review
  • Open Access
16 Citations
3,917 Views
26 Pages

Electrochemical Methods for the Analysis of Trace Tin Concentrations—Review

  • Malgorzata Grabarczyk,
  • Edyta Wlazlowska and
  • Marzena Fialek

7 December 2023

Tin determination allows for the monitoring of pollution and assessment of the impact of human activities on the environment. The determination of tin in the environment is crucial for the protection of human health and ecosystems, and for maintainin...

  • Review
  • Open Access
17 Citations
5,211 Views
36 Pages

13 February 2025

Tin, although not considered a critical material in all world regions, is a key material for modern technologies. The projected scarcity of tin in the coming decades emphasizes the need for efficient recycling methods to maintain uninterrupted supply...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
7 Citations
2,235 Views
16 Pages

Ultrasonic-Catalyzed Oxidation and Dissolution of Tin Using Hydrogen Peroxide

  • Dongbin Wang,
  • Tian Wang,
  • Shixing Wang,
  • Hongying Xia and ,
  • Wenlong Miao,
  • Thiquynhxuan Le and
  • Libo Zhang
  • + 2 authors+ 0 author

The traditional alkaline process used to prepare sodium stannate faces the challenges of high temperature, low utilization rate, and large hydrogen peroxide consumption, which is mainly due to the low oxidation dissolution efficiency of tin. Here, a...

(This article belongs to the Section Applied Chemistry)
  • Article
  • Open Access
1,788 Views
14 Pages

C-Terminal Extended Domain-Independent Telomere Maintenance: Modeling the Function of TIN2 Isoforms in Mus musculus

  • Chiao-Ming Huang,
  • Yi-Ling Shen,
  • Chia-Lo Ho,
  • Tzeng-Erh Chen and ,
  • Hsuan-Yu Hsia,
  • Zhou Songyang and
  • Liuh-Yow Chen
  • + 2 authors+ 0 author

TIN2 (TERF1 interacting nuclear factor 2) is a telomeric shelterin complex component, essential for telomere protection and early embryonic development in mammals. In humans, TIN2 isoforms arise from alternative splicing, but their specific roles in...

(This article belongs to the Section Molecular Biology)
  • Article
  • Open Access
2 Citations
2,514 Views
11 Pages

Tribological Behavior of Titanium-Sintered Composites with Ring-Shaped TiN Dispersoids

  • Junko Umeda,
  • Hiroko Fujii,
  • Ryota Takizawa,
  • Takuma Teramae and ,
  • Ammarueda Issariyapat,
  • Shota Kariya,
  • Yafeng Yang,
  • Shufeng Li and
  • Katsuyoshi Kondoh
  • + 4 authors+ 0 author

12 October 2022

The wide applicability of titanium (Ti) has prompted the analysis to improve its mechanical strength through the addition of different alloying elements. Among these, Ti materials with pre-mixed pure Ti and titanium nitride (TiN) powders as the start...

  • Article
  • Open Access

Increased bronchoalveolar lavage fluid tin content in stannosis

  • Alan Altraja,
  • Kaidi Nigol,
  • Siiri Altraja and
  • Anu Viitak

Stannosis is a rare non-fibrotic pneumoconiosis that follows the chronic inhalation of tin particles. Apart from occupational history and radiographic findings, no diagnostic criteria exist for stannosis. Therefore, analysis of bronchoalveolar lavage...

  • Article
  • Open Access
1 Citations
3,087 Views
15 Pages

Investigation of the Structural Changes in Silk Due to Tin Weighting

  • Ibrahim Elrefaey,
  • Hend Mahgoub,
  • Chiara Vettorazzo,
  • Marjan Marinšek and ,
  • Anton Meden,
  • Andrej Jamnik,
  • Matija Tomšič and
  • Matija Strlič
  • + 3 authors+ 0 author

30 August 2024

In the 19th century, the weighting of silk with metal salts, such as tin, was a common practice to enhance certain properties of silk fabrics and compensate for the weight loss incurred during the degumming process. This technique induces both physic...

(This article belongs to the Special Issue Advanced Analytical Methods for Applied Polymeric Science)
  • Review
  • Open Access
36 Citations
9,824 Views
15 Pages

26 July 2019

With the continuous improvement of the quality of steel for social development, high-quality iron ore resources have been gradually depleted. Meanwhile, the scrap steel reserve and recycling volume are gradually increasing, which will result in the c...

  • Article
  • Open Access
8 Citations
6,396 Views
15 Pages

Electrochemistry of Tin Deposition from Methanesulfonic Acid

  • Yuantao Yang,
  • Junli Wang,
  • Xuanbing Wang,
  • Jinlong Wei and ,
  • Xiaoning Tong,
  • Ruidong Xu and
  • Linjing Yang
  • + 2 authors+ 0 author

10 January 2024

The electrolytic refining of crude tin is generally carried out in the fluorosilicic acid (H2SiF6) system with the assistance of bone glue and β-naphthol. However, the high saturated vapor pressure and low stability of H2SiF6 present environment...

  • Article
  • Open Access
7 Citations
1,705 Views
14 Pages

Low-Friction Coatings Grown on Cemented Carbides by Modulating the Sputtering Process Parameters of TiN Targets

  • Hu Qiao,
  • Minghui Liu,
  • Ying Xiang,
  • Xiling Xu and ,
  • Ze Wang,
  • Wenxuan Wu and
  • Youqing Wang
  • + 2 authors+ 0 author

13 March 2025

TiN thin films are widely used as protective and decorative coatings for tools in industry. Previous studies have focused on the deposition of TiN coatings on substrates by reactive magnetron sputtering, whereas the use of TiN targets avoids problems...

(This article belongs to the Special Issue Ceramic and Glass Material Coatings)
  • Article
  • Open Access
9 Citations
6,280 Views
11 Pages

7 December 2017

Tajikistan has abundant copper–tin resources. In this study, mineralogical analysis of copper–tin ores from the Mushiston deposit of Tajikistan indicates that tin mainly occurred in mushistonite, cassiterite, and stannite, while copper mainly occurre...

  • Article
  • Open Access
3 Citations
2,136 Views
16 Pages

23 July 2025

Tin is an indispensable metal for contemporary society owing to its extensive application. China is a major tin manufacturer and consumer worldwide. Nonetheless, the crucial characteristics of its tin metabolism remain limited. Therefore, a dynamic m...

  • Feature Paper
  • Article
  • Open Access
4 Citations
2,432 Views
10 Pages

Pulse Electrolysis Technique for Preparation of Bimetal Tin-Containing Electrocatalytic Materials

  • Alexandra Kuriganova,
  • Marina Kubanova,
  • Igor Leontyev,
  • Tatiana Molodtsova and
  • Nina Smirnova

15 November 2022

Platinum–tin-containing materials are the most popular catalysts for processes occurring in fuel cells with direct ethanol oxidation. Pulse electrolysis based on the electrochemical dispersion of platinum electrodes under the influence of alter...

(This article belongs to the Special Issue Pt-M (M = Ni,Co,Cu, etc.)/C Electrocatalysts)
  • Article
  • Open Access
10 Citations
4,030 Views
20 Pages

9 August 2023

This paper considers the features of determining the total tin content in waters with different salinity. Direct ICP-spectrometric analysis of sea waters with a salinity of more than 6‰ significantly reduced the analytical signal of tin by 70%...

(This article belongs to the Special Issue Advances in Detection of Trace Elements by Analytical Spectroscopy)
  • Article
  • Open Access
6 Citations
5,929 Views
15 Pages

Electro-Coloring Mechanism of Aluminum Anodic Oxides in Tin-Based Electrolytes

  • Pinar Afsin,
  • Can Akyil,
  • Kürşat Kazmanlı and
  • Mustafa Ürgen

A method for accurately determining the chemical composition of deposits at the bottom of pores during the electrocoloring (e-coloring) of aluminum anodic oxide (AAO) layers in tin-based solutions is developed. The aluminum samples were AC e-colored...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Review
  • Open Access
22 Citations
5,386 Views
27 Pages

An Overview of the Strategies for Tin Selenide Advancement in Thermoelectric Application

  • Rosnita Md Aspan,
  • Noshin Fatima,
  • Ramizi Mohamed,
  • Ubaidah Syafiq and
  • Mohd Adib Ibrahim

27 November 2021

Chalcogenide, tin selenide-based thermoelectric (TE) materials are Earth-abundant, non-toxic, and are proven to be highly stable intrinsically with ultralow thermal conductivity. This work presented an updated review regarding the extraordinary perfo...

(This article belongs to the Section D: Materials and Processing)
  • Feature Paper
  • Article
  • Open Access
327 Views
17 Pages

Low Temperature Chemical Bath Deposition of Tin Sulfide-Based Thin Films: Structural and Optical Properties

  • Mariuca Gartner,
  • Mihai Anastasescu,
  • José María Calderón Moreno,
  • Silviu Preda and ,
  • Irina Atkinson,
  • Hermine Stroescu,
  • Madalina Nicolescu,
  • Mariana Chelu,
  • Daiana Mitrea and
  • Simeon Topalski
  • + 9 authors+ 4 authors

16 October 2026

The development of earth-abundant, low-cost and chemically stable semiconductor absorbers is essential for advancing next-generation photovoltaic technologies. Among the promising candidates, copper–tin sulfide and tin sulfide based chalcogenid...

(This article belongs to the Special Issue Advances in Multifunctional Natural and Synthetic Biomaterials)
  • Communication
  • Open Access
2,612 Views
8 Pages

ZnCl2-Enhanced Intrinsic Luminescence of Tin Chlorophosphate Glasses

  • Ting Wu,
  • Yiting Tao,
  • Panting Wang,
  • Mingjun Zhao and
  • Danping Chen

12 December 2022

This communication reports the intrinsic luminescence of tin chlorophosphate glasses. The glass maintains the low melting point characteristics of tin fluorophosphate glasses, and exhibits a red-shifted and broadened excitation wavelength peak. Tin c...

(This article belongs to the Topic Optical and Optoelectronic Properties of Materials and Their Applications)
  • Article
  • Open Access
14 Citations
3,732 Views
9 Pages

Molecular Dynamics Simulation of the Incident Energy Effect on the Properties of TiN Films

  • Jiao Li,
  • Jun Lin,
  • Qingyuan Ma,
  • Hanxiao Luan and ,
  • Lihua Zhu,
  • Ruqing Bai,
  • Guiwei Dong,
  • Diangang Wang,
  • Yanjin Guan and
  • Xiaocui Zhang
  • + 5 authors+ 0 author

19 April 2023

In this work, to investigate the physical vapor deposition (PVD)-deposited TiN coating on the TiN(001) substrate, the process was simulated using the molecular dynamics (MD) method with the 2NN-MEAM (nearest-neighbor modified embedded atom method) po...

  • Review
  • Open Access
34 Citations
6,090 Views
44 Pages

18 October 2022

Tin oxide as a semiconductor metal oxide has revealed great potential in the field of gas sensing due to its porous structure and reduced size. Especially for tin oxide and its composites, inherent properties such as high surface areas and their uniq...

(This article belongs to the Special Issue Emerging Catalytic, Energetic, and Inorganic Nonmetallic Materials)
  • Proceeding Paper
  • Open Access
1 Citations
4,155 Views
5 Pages

Hydrometallurgical Recovery of Tin from Waste-Printed Circuit Boards

  • Dimitrios Vlasopoulos,
  • Paschalis Oustadakis,
  • Emmanouella Remoundaki and
  • Styliani Agatzini-Leonardou

This study presents a hydrometallurgical process for the leaching and recovery of tin from waste-printed circuit boards (wPCBs). The process aims to separate and recover tin from filter dust produced during the crushing of wPCBs in a recycling facili...

(This article belongs to the Proceedings of The 2nd International Conference on Raw Materials and Circular Economy “RawMat2023”)
  • Article
  • Open Access
10 Citations
2,860 Views
14 Pages

24 August 2022

In this paper, non-quenched and tempered steel was selected to observe sulfide inclusions in as-cast and forged steel with different Ti and N contents, and analyzed the influence of TiN on the precipitation, morphology, distribution and composition o...

(This article belongs to the Special Issue Advances in Refining, Solidification, and Casting of Steels and Alloys)
  • Article
  • Open Access
12 Citations
4,467 Views
12 Pages

Electrochemical Migration Inhibition of Tin by Disodium Hydrogen Phosphate in Water Drop Test

  • Bokai Liao,
  • Hong Wang,
  • Shan Wan,
  • Weiping Xiao and
  • Xingpeng Guo

14 July 2020

The inhibition effect of Na2HPO4 on the electrochemical migration (ECM) of pure tin was investigated by means of water drop testing and surface characterizations. The effects of concentration of Na2HPO4 and applied direct current (DC) bias voltage on...

(This article belongs to the Special Issue Technology of Welding and Joining)
  • Article
  • Open Access
593 Views
35 Pages

14 August 2026

Slag tin content is a key indicator of reduction efficiency and metal recovery in top-blown tin smelting, but delayed and sparse laboratory assays hinder online monitoring. This study proposes a physics-informed multi-task soft sensor (PI-MTSS) combi...

(This article belongs to the Section Industrial Sensors)
  • Article
  • Open Access
10 Citations
4,257 Views
15 Pages

Evaluation of the Crystal Structure and Mechanical Properties of Cu Doped TiN Films

  • Yuyuan Fan,
  • Dong Xie,
  • Donglin Ma,
  • Fengjuan Jing and ,
  • D. T. A. Matthews,
  • R. Ganesan and
  • Yongxiang Leng
  • + 2 authors+ 0 author

In this study, TiN films doped with different copper contents (TiCuN) were prepared by using direct current magnetron sputtering method. The effects of Cu doping on composition, structure, and mechanical properties of TiN films were studied by energy...

  • Article
  • Open Access
19 Citations
3,889 Views
16 Pages

Tin Complexes Containing an Atenolol Moiety as Photostabilizers for Poly(Vinyl Chloride)

  • Baneen Salam,
  • Gamal A. El-Hiti,
  • Muna Bufaroosha,
  • Dina S. Ahmed and ,
  • Ahmed Ahmed,
  • Mohammad Hayal Alotaibi and
  • Emad Yousif
  • + 2 authors+ 0 author

6 December 2020

The lifetime of poly(vinyl chloride) (PVC) can be increased through the addition of additives to provide protection against irradiation. Therefore, several new tin complexes containing atenolol moieties were synthesized and their photostabilizing eff...

(This article belongs to the Special Issue Assessment of the Ageing and Durability of Polymers III)
  • Article
  • Open Access
1 Citations
1,869 Views
17 Pages

7 November 2025

Tin bronze/steel bimetallic is a widely utilized industrial material in the field of sliding bearing applications. Arc cladding technology represents an emerging method for fabricating tin bronze/steel bimetallic materials; however, research on their...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
31 Citations
3,767 Views
13 Pages

6 May 2019

In this paper, the precipitation thermodynamics and growth kinetics of TiN inclusions in GCr15 bearing steel during solidification were calculated in more detail. A more reasonable formula for calculating the segregation of the solute elements was ad...

  • Article
  • Open Access
2 Citations
3,124 Views
9 Pages

An Ab Initio Investigation of the Hydration of Tin(II)

  • Cory C. Pye and
  • Champika Mahesh Gunasekara

14 December 2022

The structure of tin(II) is not well known in aqueous solution. The energies, structures, and vibrational frequencies of [Sn(H2O)n,]2+ n = 0–9, 18 have been calculated at the Hartree–Fock and second order Møller–Plesset...

(This article belongs to the Special Issue Hydration of Ions in Aqueous Solution)
  • Article
  • Open Access
6 Citations
3,861 Views
13 Pages

How to keep the fidelity of the digital elevation model (DEM) data is a crucial problem in the current watermarking research, as the watermarked DEM data need to preserve their accuracy. We proposed a zero watermarking method for the triangulated irr...

(This article belongs to the Special Issue Geomorphometry and Terrain Analysis)
  • Feature Paper
  • Article
  • Open Access
7 Citations
3,823 Views
10 Pages

Cold Roll Bonding of Tin-Coated Steel Sheets with Subsequent Heat Treatment

  • Illia Hordych,
  • Khemais Barienti,
  • Sebastian Herbst,
  • Hans Jürgen Maier and
  • Florian Nürnberger

4 June 2021

One possibility to increase the interface strength of cold roll bonded materials is the application of a thin intermediate layer. In the present study, a tin coating was employed to strengthen the interface formed between cold roll bonded steel sheet...

(This article belongs to the Special Issue Casting and Rolling of Alloys)
  • Article
  • Open Access
5 Citations
6,825 Views
12 Pages

19 January 2022

In this paper, research on the effects of agitation rate for desilvering tin silver alloy residue by using pyrometallurgy was carried out. SnAg alloy residue with 92 wt.% tin and 3.56 wt.% silver was used in this study, and 99.999 wt.% zinc was added...

(This article belongs to the Special Issue Recovery of Valuable Metals from Industrial By-Products)
  • Article
  • Open Access
9 Citations
5,302 Views
19 Pages

Tin and Bronze Production at the Outeiro de Baltar Hillfort (NW Iberia)

  • Elin Figueiredo,
  • Alexandra Rodrigues,
  • João Fonte,
  • Emmanuelle Meunier and ,
  • Filipa Dias,
  • Alexandre Lima,
  • José Alberto Gonçalves,
  • Luís Gonçalves-Seco,
  • Filipe Gonçalves and
  • João P. Veiga
  • + 7 authors+ 2 authors

15 June 2022

Findings of Iron Age metallurgical activities related to tin metal and mining are very rare. In the present work, we present a detailed study of the Outeiro de Baltar hillfort, dated to the Late Iron Age/Early Roman period, located in a place where 2...

(This article belongs to the Special Issue The Role of Minerals in Cultural and Geological Heritage)
  • Article
  • Open Access
8 Citations
3,758 Views
10 Pages

The Defect Passivation of Tin Halide Perovskites Using a Cesium Iodide Modification

  • Linfeng He,
  • Jin Cheng,
  • Longjiang Zhao,
  • Xinyao Chen and ,
  • Xiaoping Zou,
  • Chunqian Zhang and
  • Junming Li
  • + 2 authors+ 0 author

3 September 2023

Tin-based perovskites are promising for realizing lead-free perovskite solar cells; however, there remains a significant challenge to achieving high-performance tin-based perovskite solar cells. In particular, the device fill factor was much lower th...

(This article belongs to the Topic Challenges towards Upscaling and Stabilization of Perovskite Solar Cells)
  • Article
  • Open Access
6 Citations
3,306 Views
12 Pages

21 October 2024

Tin-containing tailing is classified as a solid waste, but it possesses valuable resources such as tin and iron. Tin-containing tailing exhibits a fine distribution and compact symbiosis of cassiterite- and iron-containing minerals. Therefore, it is...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
13 Citations
4,880 Views
12 Pages

Deposition and Application of Indium-Tin-Oxide Films for Defrosting Windscreens

  • Ruslanas Ramanauskas,
  • Aleksandras Iljinas,
  • Liutauras Marcinauskas,
  • Mindaugas Milieška and ,
  • Žydrūnas Kavaliauskas,
  • Giedrius Gecevičius and
  • Vytautas Čapas
  • + 2 authors+ 0 author

The plasma-activated reactive evaporation technique was used for the formation of indium-tin-oxide (ITO) films. The ITO films were deposited on a heated (up to 350 °C) glass substrates using various mass ratios of indium and tin. The optical and...

  • Article
  • Open Access
1 Citations
547 Views
19 Pages

Mineralogical and Technological Characteristics of Tin-Bearing Weathering Crusts of the Syrymbet Deposit and Prospects for Their Processing by Thermal Activation

  • Madina Kurmangazhina,
  • Valerii Peregudov,
  • Bulat Sukurov,
  • Kuanysh Togizov and ,
  • Yalkunzhan Arshamov and
  • Daulet Muratkhanov
  • + 1 author+ 0 author

6 July 2026

Comprehensive mineralogical and technological investigations of tin-bearing weathering crusts from the Syrymbet deposit (Northern Kazakhstan), characterized by low tin grades and a high degree of mineral dispersion, are presented. The particle-size d...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
3 Citations
2,481 Views
21 Pages

7 November 2024

Large TiN inclusions in nickel-based superalloys promote micropore formation, compromising the mechanical properties of the alloys. However, current research lacks a comprehensive coupled model that considers both solute element microsegregation and...

(This article belongs to the Special Issue Manufacturing, Characterization and Modeling of Advanced Materials)
  • Review
  • Open Access
26 Citations
6,487 Views
18 Pages

Innovative Materials for High-Performance Tin-Based Perovskite Solar Cells: A Review

  • Xiansheng Wang,
  • Jianjun Yang,
  • Jian Zhong,
  • Junsheng Yu and
  • Xinjian Pan

30 October 2024

With the rapid development of lead-based perovskite solar cells, tin-based perovskite solar cells are emerging as a non-toxic alternative. Material engineering has been an effective approach for the fabrication of efficient perovskite solar cells. Th...

(This article belongs to the Special Issue Material-Process-Structure Integrated Design for Advanced Polymeric Composites)
  • Article
  • Open Access
2,516 Views
13 Pages

Characterization of Surface α-Particle Radiation, Internal Traceability and Simulation of Typical Tin Spheres

  • Longfei Liu,
  • Zhangang Zhang,
  • Hong Zhang,
  • Hui Li and ,
  • Zhifeng Lei,
  • Junyang Luo,
  • Chao Peng,
  • Changhao Sun and
  • Yujuan He
  • + 4 authors+ 0 author

17 May 2024

Surface α-particle emissivity testing and spectral characterization of two leaded tin spheres (Sn10%Pb90%, Sn63%Pb37%) and one lead-free tin sphere (Sn96.5%Ag3.0%Cu0.5%, SAC305) were carried out. The results show that Sn10%Pb90% Sn spheres have...

(This article belongs to the Section Applied Physics General)
  • Article
  • Open Access
4 Citations
3,723 Views
23 Pages

The Effect of Tin on Microstructure and Properties of the Al-10 wt.% Si Alloy

  • Janusz Kozana,
  • Marcin Piękoś,
  • Aldona Garbacz-Klempka and
  • Małgorzata Perek-Nowak

13 September 2022

In this paper, the results from studies regarding near-eutectic Al-Si alloys with Sn as an alloying addition are presented. In most Al-Si alloys, tin is regarded as a contaminant; thus, its amount is limited to up to 0.3 wt.%. The few studies that ca...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
12 Citations
4,072 Views
11 Pages

Influence of the Nitrogen Flux Ratio on the Structural, Morphological and Tribological Properties of TiN Coatings

  • Xiaojing Fu,
  • Shuming Guo,
  • Yong Wan,
  • Qiang Li and ,
  • Bingchang Liu and
  • Hui Zheng
  • + 1 author+ 0 author

31 December 2022

In this study, the structural characteristics of TiN coatings deposited by DC magnetron sputtering on the surface of AISI 304 stainless steel were modulated by performing deposition at four different nitrogen flux ratios. The XRD results indicated th...

(This article belongs to the Special Issue Ceramic Films and Coatings: Properties and Applications)

of 76