- Article
Passivation is commonly used to suppress current collapse in AlGaN/GaN HEMTs. However, the conventional PECV-fabricated SiNx passivation layer is incompatible with the latest process, like the “passivation-prior-to-ohmic” method. Research...
Passivation is commonly used to suppress current collapse in AlGaN/GaN HEMTs. However, the conventional PECV-fabricated SiNx passivation layer is incompatible with the latest process, like the “passivation-prior-to-ohmic” method. Research...
An effective in situ H2/N2 pretreatment technique for enhancement-mode GaN MISFET with a PEALD AlN/LPCVD SiNx Dual Gate Dielectric is presented. This technique features in situ H2 (15%)/N2 (85%) plasma pretreatment prior to AlN deposition. By using i...
Ultra-wide bandgap β-Ga2O3 is a promising low-cost alternative to conventional direct X-ray detector materials that are limited by fabrication complexity, instability, or slow temporal response. Here, we comparatively investigate β-Ga2O3 th...
Macroporous silicon has been etched from n-type Si, using a vertical etching cell where no rear side contact on the silicon wafer is necessary. The resulting macropores have been characterised by means of Scanning Electron Microscopy (SEM). After etc...
Conventional Si or SiGe epitaxy via chemical vapor deposition is performed at high temperatures with a large amount of hydrogen gas using silane (SiH4) or dichlorosilane (SiCl2H2) precursors. These conventional precursors show low growth rates at low...
In micro-machined micro-electromechanical systems (MEMS), refilled high-aspect-ratio trench structures are used for different applications. However, these trenches often show keyholes, which have an impact on the performance of the devices. In this p...
In the present work, a low-pressure chemical vapor deposition (LPCVD) Ti0.17Al0.83N and state-of-the-art arc ion plating PVD-Ti1−xAlxN (x = 0.25, 0.55, 0.60, 0.67) coatings were deposited on cemented carbide substrate. The morphological, struct...
Silicon nitride is a material compatible with CMOS processes and offers several advantages, such as a wide transparent window, a large forbidden band gap, negligible two-photon absorption, excellent nonlinear properties, and a smaller thermo-optic co...
This study reports the chemical vapor deposition of amorphous boron carbonitride films on Si(100) and SiO2 substrates using a trimethylamine borane and nitrogen mixture. BCxNy films with different compositions were produced via variations in substrat...
The thickness of the LPCVD-Si3N4 gate dielectric layer significantly influences the electron transport properties of AlGaN/GaN metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMTs), but the mechanism by which it aff...
SiBCN ceramics were introduced into porous Si3N4 ceramics via a low-pressure chemical vapor deposition and infiltration (LPCVD/CVI) technique, and then the composite ceramics were heat-treated from 1400 °C to 1700 °C in a N2 atmosphere. The effects o...
The purpose of this paper is to give a review on the state of the art of polycrystalline SiC material grown by low-pressure chemical vapor deposition (LPCVD). Nowadays, LPCVD is the main technique used for the deposition of polycrystalline SiC, both...
A high threshold voltage (VTH) normally off GaN MISHEMTs with a uniform threshold voltage distribution (VTH = 4.25 ± 0.1 V at IDS = 1 μA/mm) were demonstrated by the selective area ohmic regrowth technique together with an Si-rich LPCVD-SiN...
This study employed low-pressure chemical vapor deposition (LPCVD) SiNx as both the gate dielectric layer and surface passivation layer, systematically investigating the effects of different growth conditions on the dielectric layer quality, two-dime...
Polycrystalline silicon (poly-Si) is a promising channel material for three-dimensional (3D) stacked memory architecture owing to its process compatibility and excellent manufacturability. However, its practical application is hindered by intrinsic l...
Recently, there has been growing interest in the synthesis of thin films made from metal diboride. Boron forms binary compounds with a wide variety of metals. These diborides are refractory, ultra-hard solids characterized by high melting points, exc...
In this study, we demonstrated that the deposition of Sn on Ni–Fe wires using low-pressure chemical vapor deposition (LPCVD) can be used to control the electrical resistivity of the wires. Furthermore, the effect of the deposition temperature o...
Silicon nitride is a commonly used material for ceramic applications and in the fabrication processes of integrated circuits (ICs). It has also increased in interest from the scientific community for use as a functional coating due to its physical, m...
I Microhotplates are critical devices in various MEMS sensors that could provide appropriate operating temperatures. In this paper, a novel design of poly-Si membrane microhotplates with a heat compensation structure was reported. The main objective...
Large specific surface area nanostructures are desirable in a wide range of sensing applications due to their longer light-trapping path and increased absorption. Engineering of the specific nanotree structure which possesses a high branch density tu...
This paper explores poly-silicon-germanium (poly-SiGe) avalanche photo-sensors (APSs) involving a device of heterojunction structures. A low pressure chemical vapor deposition (LPCVD) technique was used to deposit epitaxial poly-SiGe thin films. The...
This work reports the results of our investigation of the structure and mechanical properties of physical vapor deposition (PVD) and chemical vapor deposition (CVD) TiAlSiN coatings deposited on cemented carbide substrates. For the first time, a nove...
In this work, we prepared ultra-long Si-doped β-Ga2O3 nanowires on annealed Al2O3-film/Si substrate by low-pressure chemical vapor deposition (LPCVD) assisted by Au as catalyst. The length of nanowires exceeds 300 μm and diameters range from...
Beta-phase gallium oxide (β-Ga2O3) is a cutting-edge ultrawide bandgap (UWBG) semiconductor, featuring a bandgap energy of around 4.8 eV and a highly critical electric field strength of about 8 MV/cm. These properties make it highly suitable for...
Tunnel oxide passivating contact cells have become the mainstream form of high-performance photovoltaic cells; however, the key factor restricting the further improvement of tunnel oxide passivating contact cell performance lies in the deposition pro...
Sodium hypochlorite (NaClO) is widely used for the chemical cleaning of fouled ultrafiltration (UF) membranes. Various studies performed on polymeric membranes demonstrate that long-term (>100 h) exposure to NaClO deteriorates the physicochemical...
Wide band gap semiconductor 4H-SiC is currently widely used in the manufacture of high-frequency and high-voltage power devices. The size of commercial 4H-SiC wafers is increasing, from 4 inches to 6 inches. Surface roughness, as one of the parameter...
Two multilayer (ML) structures, composed of five layers of silicon-rich oxide (SRO) with different Si contents and a sixth layer of silicon-rich nitride (SRN), were deposited by low pressure chemical vapor deposition. These SRN/SRO MLs were thermally...
This research has developed a process for producing ZnO thin film from DEZn deposited onto a PET substrate with low-pressure, high-frequency Ar + O2 plasma using a chemical vapor deposition technique. The aim is to study the film production condition...
In this paper, the compressive stress of pristine and coated vertically-aligned (VA) multi-walled (MW) carbon nanotube (CNT) pillars were investigated using flat-punch nano-indentation. VA-MWCNT pillars of various diameters (30–150 µm) gr...
The correlation between structural properties of Al-rich self-assembled nano-lamellar AlxTi1−xN coatings and process parameters used during their chemical vapor deposition (CVD) remains unexplored. For this article, two gradient AlxTi1−xN coatings we...
Silicon nitride (SiN) is emerging as a material of choice for photonic integrated circuits (PICs) due to its ultralow optical losses, absence of two-photon absorption in telecommunication bands, strong Kerr nonlinearity and high-power handling capabi...
We report a new method for growing hexagonal columnar nanograin structured silicon carbide (SiC) thin films on silicon substrates by using graphene–graphitic carbon nanoflakes (GGNs) templates from solid carbon sources. The growth was carried out in...
A new flower-like hybrid structure consisting of nitrogen-doped 3-dimensional (3D) graphene and vertically aligned graphene has been synthesized using a combination of low-pressure chemical vapor deposition (LPCVD) and plasma-enhanced chemical vapor...
A resonant microbeam accelerometer of a novel highly symmetric structure based on MEMS bulk-silicon technology is proposed and some numerical modeling results for this scheme are presented. The accelerometer consists of two proof masses, four support...
The optical properties of MoS2 and WS2 monolayers are significantly influenced by fabrication methods, especially with respect to the behavior of excitons at the K−point of the Brillouin zone. Using spectroscopic ellipsometry, we obtain the com...
Nano-textured 4H–SiC homoepitaxial layers (NSiCLs) were grown on 4H–SiC(0001) substrates using a low pressure chemical vapor deposition technique (LPCVD), and subsequently were subjected to high temperature treatments (HTTs) for investigation of the...
Direct chemical vapor deposition (CVD) growth of hexagonal boron nitride (h-BN) on insulating substrates offers a promising pathway to circumvent transfer-induced defects and enhance device integration. This comprehensive review systematically evalua...
The silicon nitride (SiN) platform offers a low-loss solution for photonic integrated circuits (PICs). The bent waveguide represents one of the primary sources of propagation loss in such integrated systems. In this work, we present a comprehensive r...
Supercapacitors have the characteristics of high power density, long cycle life, and fast charge and discharge rates, making them promising alternatives to traditional capacitors and batteries. The use of transition-metal compounds as electrode mater...
In recent years, two-dimensional (2D) layered transition metal dichalcogenides (TMDs) have received significant attention due to their exceptional electrical and optical properties. Among these 2D materials, ReS2 distinguishes itself through its uniq...
Zirconium sulfide nanoparticles (ZrxSy) are prepared on a flexible substrate of carbon cloth (CC) via a one-step synthesis approach using the low-pressure chemical vapor deposition (LPCVD) technique. The scanning electron microscopy (SEM) image revea...
In this study, we fabricated a wireless micro FET (field effect transistor) pressure sensor based on the commercial CMOS (complementary metal oxide semiconductor) process and a post-process. The wireless micro pressure sensor is composed of a FET pre...
With the rapid development of artificial intelligence (AI) and machine learning (ML) applications, wafer-level optical I/O is becoming increasingly attractive for massive and efficient data interconnects in future wafer-scale multi-processor-units (m...
Polycrystalline nitrogen-doped cubic silicon carbide (3C-SiC) thin films are grown on 2″ Si wafers by a low-pressure chemical vapor deposition (LPCVD) technique with the aim for them to be used as support and active materials in microelectronic...
Thermoelectric gas sensor (THGS) devices with catalysts and Si0.8Ge0.2 thin films of different boron doping levels of 1018, 1019, and 1020 cm−3 were fabricated, and their transport properties are investigated. SiGe films were deposited on Si3N4...
Stacked SiGe/Si structures are widely used as the units for gate-all-around nanowire transistors (GAA NWTs) which are a promising candidate beyond fin field effective transistors (FinFETs) technologies in near future. These structures deal with a sev...
Epitaxial growth of β-Ga2O3 nanowires on silicon substrates was realized by the low-pressure chemical vapor deposition (LPCVD) method. The as-grown Si/Ga2O3 heterojunctions were employed in the Underwater DUV detection. It is found that the carr...
This paper presents the simulation, fabrication and characterization of a microFET (field effect transistor) pressure sensor with readout circuits. The pressure sensorincludes 16 sensing cells in parallel. Each sensing cell that is circular shape is...
Silicon nitride waveguides have emerged as an excellent platform for photonic applications, including nonlinear optical signal processing, owing to their relatively high Kerr nonlinearity, negligible two photon absorption, and wide transparent bandwi...
of 2